CPC1017N

4 Pin SOP OptoMOS® Relays

CPC1017N Units Description

Load Voltage 60 V The CPC1017N is a miniature 1-Form-A solid state
Load Current 100 mA
relay in a 4 pin SOP package that employs optically
coupled MOSFET technology to provide 1500V of
Max RON 16 Ω
input to output isolation. The super efficient MOSFET
LED Current to operate 1.0 mA switches and photovoltaic die use Clare’s patented
OptoMOS architecture. The optically coupled input is
controlled by a highly efficient GaAIAs infrared LED.
Features The CPC1017N uses Clare’s state-of-the-art double
• Design for use in security systems complying with molded vertical construction packaging to produce
EN50130-4 the world’s smallest relay. The CPC1017N offers
• Only 1mA of LED current required to operate board space savings of at least 20% over the com-
• Small 4 Pin SOP Package petitor’s larger 4 pin SOP relay. It boasts the indus-
• TTL/CMOS Compatible input tries’ lowest input current to operate in its class.
• No Moving Parts
• High Reliability
• Arc-Free With No Snubbing Circuits
• 1500VRMS Input/Output Isolation/2100V AC peak Approvals
• No EMI/RFI Generation • UL Recognized Component
• Immune to radiated EM fields • BSI Certified to EN60950
• SMD Pick & Place, Wave Solderable
• Tape & Reel Version Available
Ordering Information
Part # Description

Applications CPC1017N 4 Pin SOP (100/tube)

• Security CPC1017NTR 4 Pin SOP (2,000/reel)
• Passive Infrared Detectors (PIR)
• Data Signalling
• Sensor Circuitry
Pin Configuration
• Instrumentation
• Multiplexers CPC1017N Pinout
• Data Acquisition
• Electronic Switching
1 4
• I/O Subsystems + Control Load
• Meters (Watt-Hour, Water, Gas)
• Medical Equipment—Patient/Equipment Isolation – Control
2 3
Load
• Aerospace
• Industrial Controls

Switching Characteristics of
Normally Open (Form A) Devices

10ms
CONTROL

+90%
LOAD 10%+ 10%+
TON TOFF

DS-CPC1017N-R2.0 www.clare.com 1
CPC1017N

Absolute Maximum Ratings (@ 25˚ C)

Parameter Min Typ Max Units Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to
Input Power Dissipation - - 70 mW the device. Functional operation of the device at these or
Input Control Current - - 50 mA any other conditions beyond those indicated in the opera-
Peak (10ms) - - 1 A tional sections of this data sheet is not implied. Exposure of
Reverse Input Voltage - - 5 V the device to the absolute maximum ratings for an extend-
Total Power Dissipation - - 4001 mW ed period may degrade the device and effect its reliability.
Isolation Voltage Input
to Output(AC Peak test voltage) 2100 - - Vpeak
Operational Temperature -40 - +85 °C

Storage Temperature -40 - +125 °C

Soldering Temperature - - +220 °C
(10 Seconds Max.)
1 Derate Linearly 3.33 mW / oC

Electrical Characteristics
Parameter Conditions Symbol Min Typ Max Units
Output Characteristics @ 25°C
Load Voltage (Peak) IL=1µA VL - - 60 V
Load Current (Continuous)
AC Peak 1 IF=2mA IL - - 100 mA
Peak Load Current 10ms ILPK - - 350 mA
On-Resistance 2 IL=100mA RON - - 16 Ω
Off-State Leakage Current VL=60V ILEAK - - 1 µA
Switching Speeds
Turn-On IF=5mA, VL=10V TON - - 10 ms
Turn-Off IF=5mA, VL=10V TOFF - 10 ms
Output Capacitance 50V; f=1MHz COUT - 25 - pF
Capacitance
Input to Output - - - 1 - pF
Input Characteristics @ 25°C
Input Control Current 3 IL=100mA IF 1 - 50 mA
Input Dropout Current - IF 0.3 0.9 - mA
Input Voltage Drop IF=5mA VF 0.9 1.2 1.4 V
Reverse Input Voltage - VR - - 5 V
Reverse Input Current VR=5V IR - - 10 µA
1Load current derates linearly from 100mA @ 25oC to 80mA @ 80oC.
2 Measurement taken within 1 second of on time.
3 For applications requiring high temperature operation (greater than 60oC) an LED drive current of 3mA is recommended.

2 www.clare.com Rev. 2.0

 CPC1017N

PERFORMANCE DATA*

CPC1017N CPC1017N CPC1017N

Typical LED Forward Voltage Drop Typical On-Resistance Distribution Typical IF for Switch Operation
(Ambient Temperature = 25oC) (Ambient Temperature = 25 C) o
(Ambient Temperature = 25oC)
IF = 5mADC (Load Current = 100mA) (Load Current = 100mA)
35 35 25

30 30
20

Device Count (N)

Device Count (N)
Device Count (N)

25 25

15
20 20

15 15 10

10 10
5
5 5

0 0 0
1.17 1.19 1.21 1.23 1.25 6.8 6.9 7.0 7.1 7.2 7.3 7.4 0.30 0.35 0.40 0.45 0.50 0.55 0.60

LED Forward Voltage Drop (V) On-Resistance (Ω) LED Current (mA)

CPC1017N CPC1017N CPC1017N

Typical IF for Switch Dropout Typical Turn-On Time Typical Turn-Off Time
o
(Ambient Temperature = 25 C) (Ambient Temperature = 25oC) (Ambient Temperature = 25oC)
(Load Current = 100mA) (Load Current = 100mA; IF = 5mA) (Load Current = 100mA; IF = 5mA)
25 25 25

20 20 20

Device Count (N)

Device Count (N)

Device Count (N)

15 15 15

10 10 10

5 5 5

0 0 0
0.30 0.35 0.40 0.45 0.50 0.55 0.60 1.0 1.1 1.2 1.3 1.4 1.5 1.6 0.26 0.28 0.30 0.32 0.34 0.36 0.38
LED Current (mA) Turn-On (ms) Turn-Off (ms)

CPC1017N CPC1017N CPC1017N

Typical Blocking Voltage Distribution Typical Load Current vs. Temperature Typical Leakage vs. Temperature
(Ambient Temperature = 25oC) 180 (Measured across Pins 3 & 4) IL = max rated
35 160 0.016

30 140 0.014
Load Current (mA)

120 0.012
Device Count (N)

25
Leakage (µA)

100 0.010
20 80
IF =5mA
IF =2mA 0.008
15 60
0.006
10 40
0.004
20
5 0.002
0
0 -40 -20 0 20 40 60 80 100 120 0
106 109 112 115 118 121 124 Temperature ( oC)
-40 -20 0 20 40 60 80 100
Blocking Voltage (V) Temperature (oC)

CPC1017N CPC1017N CPC1017N

Typical Blocking Voltage Typical Turn-Off vs. Temperature Typical LED Forward Voltage Drop
vs. Temperature (Load Current = 50mA) vs. Temperature
122 1.000 1.8
LED Forward Voltage Drop (V)

121 0.900
Blocking Voltage (VRMS)

0.800 1.6
120 0.700
Turn-Off (ms)

119 0.600 1.4

50mA
0.500
118 0.400 1.2
IF =5mA
117 0.300 10mA
5mA
0.200
116 0.100
1.0
IF =2mA
115 0 0.8
-40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100 120
Temperature (oC) Temperature ( C) o
Temperature (oC)

* The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application
department.

Rev. 2.0 www.clare.com 3

 CPC1017N

PERFORMANCE DATA*

CPC1017N CPC1017N CPC1017N

Typical Turn-On vs. LED Forward Current Typical Turn-Off vs. LED Forward Current Typical On-Resistance vs. Temperature
(Load Current = 100mA) (Load Current = 100mA) (Load Current = max rated @ temperature)
3.0 0.7 14
2.7 IF = 2mA
2.4 0.6
12
2.1 IF = 5mA

On-Resistance ()
0.5
Turn-On (ms)

10

Turn-Off (ms)
1.8 0.4 Steady State
1.5 8
1.2 0.3 Instantaneous
0.9 6 IF = 5mA
0.2
0.6
0.3 0.1 4
0 0 2
0 5 10 15 20 25 30 35 40 45 50 0 5 10 15 20 25 30 35 40 45 50 -40 -20 0 20 40 60 80 100
LED Forward Current (mA) LED Forward Current (mA) Temperature (oC)

CPC1017N CPC1017N
Typical IF for Switch Operation Typical Load Current vs. Load Voltage
vs. Temperature (Ambient Temperature = 25oC) CPC1017N
(Load Current = 80mA) IF = 5mA Energy Rating Curve
3.000 150 1.0
0.9
2.500 100
0.8
Load Current (mA)
LED Current (mA)

Load Current (A)

2.000 50 0.7
0.6
1.500 0 0.5
0.4
1.000 -50
0.3
0.500 -100 0.2
0.1
0 -150 0
-40 -20 0 20 40 60 80 100 -1.5 -1.0 -0.5 0 0.5 1.0 1.5 10µs 100µs 1ms 10ms 100ms 1s 10s 100s
Temperature (oC) Load Voltage (V) Time

* The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application
department.

4 www.clare.com Rev. 2.0

 CPC1017N

MECHANICAL DIMENSIONS

4 Pin SOIC Narrow (“N” Suffix)

.38 TYP.
(.015 TYP.)

6.096 ± .102 3.81 ± .08

(.240 ± .004) (.150 ± .003)

.38 x 45¼
(.015 x 45¼ )
4.09 ± 0.20
(0.161 ± 0.008)
1.02 ± .025 2.18 MAX.
(.040 ± .001) (.086)

.432 ± .127
.20 ± .025 2.54 TYP.
(.017 ± .005)
(.008 ± .001) (.100 TYP.)

PC Board Pattern (Top View)

2.54 ± 0.127
(0.100 ± 0.005)

5.66 ± 0.14
(0.223 ± 0.005)
1.448
(0.057)

0.889
(0.035)

Tape and Reel Packaging for 4 pin SOIC package

330.2 DiA
(13.00") 6.50+_
0.15
4.2 8.00
3.0 R A 1.5 dia 2.30 +
_ 0.15

Top Cover .3 R MAX

Tape Thickness TYP
0.102 MAX _ 0.15 3.8
4.70 +
(0.004) TYP 12.00
5.50 +
_ .10

A
1.50 2.00 +
_ .05 .30
1.60 1.75
4.00 +
_ .10
2.7 +
_ 0.15

SECTION A-A

Embossed
Carrier

Embossment

Dimensions
mm
(inches)

Rev. 2.0 www.clare.com 5

For additional information please visit our website at: www.clare.com
Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions
at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and
disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.

The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to sup-
port or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or
make changes to its products at any time without notice.

Specification: DS-CPC1017N-R2.0
©Copyright 2001, Clare, Inc.
OptoMOS® is a registered trademark of Clare, Inc.
All rights reserved. Printed in USA.
1/9/02