Scribd Logo
Upload

Welcome to Scribd!

  • 13 views

    D375a-5 SN.18052 ... (JPN) VHMS Specification.2

    Uploaded by

    marsh2002
    Ggggg

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    D375a-5 SN.18052 ... (JPN) VHMS Specification.2

    Uploaded by

    marsh2002
    13 views1 page
    Ggggg

    Original Title

    D375A-5 SN.18052~ ...(JPN) VHMS SPECIFICATION.2

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Ggggg

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    13 views1 page

    D375a-5 SN.18052 ... (JPN) VHMS Specification.2

    Uploaded by

    marsh2002
    Ggggg

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    TESTING AND ADJUSTING MEASURING FUEL CIRCUIT PRESSURE

    4) Measure the fuel pump outlet pressure at


    each engine speed.
    a Check that the fuel pump outlet pressure
    is in the following range.
    a Fuel pump outlet pressure:

    Engine Fuel pump outlet Sensor


    voltage
    speed pressure (Reference)
    0.83 ± 0.14 MPa
    600 rpm 1.78 ± 0.21 V
    {8.45 ± 1.41 kg/cm2}
    0.93 ± 0.14 MPa
    700 rpm 1.94 ± 0.21 V
    {9.50 ± 1.41 kg/cm2}
    3) Start the engine, set the monitor panel in the 1.03 ± 0.14 MPa
    800 rpm 2.10 ± 0.21 V
    MONITORING MODE, and prepare for mea- {10.53 ± 1.41 kg/cm2}
    suring the engine speed. 1.14 ± 0.14 MPa
    900 rpm 2.26 ± 0.21 V
    a For the operating method, see SPECIAL {11.60 ± 1.41 kg/cm2}
    FUNCTIONS OF MONITOR PANEL 1.25 ± 0.14 MPa
    1,000 rpm 2.42 ± 0.21 V
    (EMMS). {12.70 ± 1.41 kg/cm2}
    • Monitoring code: 01002 (Engine speed) 1.34 ± 0.14 MPa
    1,100 rpm 2.59 ± 0.21 V
    a The engine speed is displayed on the {13.70 ± 1.41 kg/cm2}
    service meter display section in 1 rpm. 1.46 ± 0.14 MPa
    1,200 rpm 2.76 ± 0.21 V
    {14.90 ± 1.41 kg/cm2}

    a The sensor voltage shown in the above


    table is the voltage measured at the
    PMPR connector of the fuel pump pres-
    sure sensor. It is shown for reference.

    5) After finishing measurement, remove the


    measuring instruments and return the re-
    moved parts.

    20-122 D375A-5

    You might also like