Scribd Logo
Upload

Welcome to Scribd!

  • 17 views

    Purlins

    Uploaded by

    Erickson Malicsi
    The document discusses the design of purlins for a roof truss. It provides dimensions and specifications of the truss and roof. It then calculates loads on the purlins from dead load, live load, and wind load. Finally, it selects a 2x4 C-channel purlin and verifies it has sufficient strength based on the calculated bending stresses.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd

    Purlins

    Uploaded by

    Erickson Malicsi
    17 views1 page
    The document discusses the design of purlins for a roof truss. It provides dimensions and specifications of the truss and roof. It then calculates loads on the purlins from dead load, live load, and wind load. Finally, it selects a 2x4 C-channel purlin and verifies it has sufficient strength based on the calculated bending stresses.

    Copyright

    © © All Rights Reserved

    Available Formats

    XLS, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document discusses the design of purlins for a roof truss. It provides dimensions and specifications of the truss and roof. It then calculates loads on the purlins from dead load, live load, and wind load. Finally, it selects a 2x4 C-channel purlin and verifies it has sufficient strength based on the calculated bending stresses.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    17 views1 page

    Purlins

    Uploaded by

    Erickson Malicsi
    The document discusses the design of purlins for a roof truss. It provides dimensions and specifications of the truss and roof. It then calculates loads on the purlins from dead load, live load, and wind load. Finally, it selects a 2x4 C-channel purlin and verifies it has sufficient strength based on the calculated bending stresses.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    You are on page 1of 1

    DESIGN OF PURLINS

    Purlin Design 3/25/2022 13:55

    a = 5.0625 m
    Truss length = 10.125 m b = 2 m
    Truss Ht. = 2 m c = 5.485 m
    Bay length = 2.333 m Ce = 0.63
    Slope = 21.555 deg Cqpress = 0.3
    Purlin Spacing = 0.6 m Cqsuct = -0.9
    Heigth of roof = 5 m I = 1
    Qs = 1500 Pa
    Dead loads:
    Tile roof Span = 72 Pa Total DL = 140 Pa
    Purlins & acc. = 68 Pa
    Live loads:
    Construction load = 1000 Pa
    Wind load: ( P = CeCqQsI )
    Psuctn = -850.5 Pa
    Ppress = 283.5 Pa

    Normal loads per ln. mtr. Tangential loads per ln. mtr.
    DL = 77.5296 N/m DL = 30.629 N/m
    LL = 553.783 N/m LL = 218.778 N/m
    WLsuctn = -510.3 N/m
    WLpress = 170.1 N/m

    Load Combination: ( DL + LL )
    Wn = 631.313 N/m Wt = 249.407 N/m

    Mn = 429.521 N-m Mt = 169.687 N-m

    Try 2" x 4" C- purlins ( C4 x 5.4 )

    Sx = 31500 cu.mm Sy = 4700 cu.mm

    FBx = 13.6356 Mpa Fby = 36.1036 Mpa

    FBtotal = 49.73922 Mpa < 123.6 Mpa


    Safe...

    Copyright MXMIX Engr. Erickson D. Malicsi

    You might also like