Scribd
Upload
40 views35 pages

Enode B MML Commands

The document provides information about commands to display network element parameters and troubleshoot connectivity issues between an eNodeB and MME including ping tests. It lists DSP commands and provides MME source IP, subrack and slot numbers to check connectivity to other vendor sites.

Uploaded by

Mohammed Babar Ahmed
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
40 views35 pages

Enode B MML Commands

The document provides information about commands to display network element parameters and troubleshoot connectivity issues between an eNodeB and MME including ping tests. It lists DSP commands and provides MME source IP, subrack and slot numbers to check connectivity to other vendor sites.

Uploaded by

Mohammed Babar Ahmed
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 35

:-Command: Ping

:-Command: DSP EnodeB


:-Command: DSP BRD
:-Command: DSP CELL
:-Command: DSP ETHPORT
:-Command: DSP GPS
:-Command: DSP IPRT
:-Command: DSP LOCALIP
:-Command: DSP RETDEVICEDATA
:-Command: DSP RRU
:-Command: DSP S1INTERFACE
:-Command: DSP X2INTERFACE
:-Command: DSP VSWR
:-Command: DSP BRDMFRINFO
:-Command: DSP BRDTEMP
:-Command: DSP CPRIPORT
:-Command: DSP DEVIP
:-Command: DSP MME
:-Command: DSP OMCH
:-Command: DSP SCTPLNK
:-Command: ADD OP
:-Command: MOD OP
:-Command: LST OP
:-Command: CLB RET
:-Command: LST SECTOR
:-Command: DSP X2INTERFACE
RST EnodeB
LST VLANMAP
Loss of visibility(Ping test from MME to EnodeB)
find all information to save the time :

constant ( S1_MME_VRF )

N : (PS-MSDH01)

 
PS-SPJH01 ( JED _ USN ) : slot no 11
 

PS-MSRH01 ( RYD _ USN ) :

RYD _ USN1 :
Ping test from EnodeB to
MME
Ping
Site down due to power
• NPTS accepted//refer to E/CRBldg;
• NPTS not accept then refer to HUA-
FO-SL
Transmission issue
• Five types:MW,DWDM,Dark
fiber,PAN,GPON
• MW/DWDMDS-TNOC-SFM(provide
the NI,VLANs)
• GPONHuawei-FTTX-FO-NS(provide
the Vlans and MDU,site IP)
• For Cisco ,provide PeAgg Name,
Slot/Bay/Port,IP and Vlans
• NE40 to RTPE uplink goes down need
open TT and inform to BO
• In case ping test required to check other vendor sites which are connected with our
MME you will need to MME source IP , MME subrack No and MME slot No .
• Here you can find all information to save the time : 
• VRF Name is constant ( S1_MME_VRF )
• LASILKI _ USN :
 

• PS-SPJH01 ( JED _ USN ) :


•  
•  
• PS-MSRH01 ( RYD _ USN ) :
•  
•  
• RYD _ USN1 :
•  
•  

You might also like