Scribd
Upload
70 views3 pages

Spring Loaded Power Slip

The Spring Loaded Power Slip is a foot-operated device that protects drill pipes and tubing during setting and releasing operations. It uses interchangeable inserts to grip tubing from 4.5 to 5.5 inches in diameter. Applying pressure to the slip set ring with your foot engages the slips, while releasing pressure allows the counterbalanced coil springs to return the slips to the open position. It consists of a top cover assembly, slip assembly with inserts, and a bowl assembly to mount it to the rotary table and master bushing.

Uploaded by

Ali
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
70 views3 pages

Spring Loaded Power Slip

The Spring Loaded Power Slip is a foot-operated device that protects drill pipes and tubing during setting and releasing operations. It uses interchangeable inserts to grip tubing from 4.5 to 5.5 inches in diameter. Applying pressure to the slip set ring with your foot engages the slips, while releasing pressure allows the counterbalanced coil springs to return the slips to the open position. It consists of a top cover assembly, slip assembly with inserts, and a bowl assembly to mount it to the rotary table and master bushing.

Uploaded by

Ali
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

https://www.spectrumdrillingtools.

com/spring-loaded-power-slip

SPECTRUM make Spring Loaded Power Slip (SDTISPS-27) is


foot-operated slip to protect Drill Pipes and tubing with a range
from 4½” to 5½” while setting and releasing by simply changing
inserts. The slip can be set simply by applying foot pressure on the
slip set ring. This eliminates the manual setting and lifting of slips.
The unit consists of four slip segments with inserts and four coil
spring cartridges as a counterbalance to offset the weight of slips
when in the upper released position. It is suitable to fit into 27½”
and 37½” to 49½” Rotary tables with API Pin Drive Master
Bushing. The unit consists of three major assemblies as under: -
 
1. Top Cover Assembly
The top cover assembly is ergonomically designed with two halves
and a slip set ring. The top cover assembly is mounted on four slip
hangers with pins.

2. Slip Assembly
Four slip segments of 16½” grip length for gripping the tubular size
4½” to 5½” are dressed with 48 Nos Inserts, 4 Nos Insert Retaining
Ring and 8 Nos Allen Screw.

3. Bowl Assembly
Bowl assembly consists of two halves connected with a bowl hinge
pin to enable the installation and removal of the power slip from
the Master Bushing. Bowl assembly is provided with four numbers
of Coil Spring Cartridges and Foot Pedal for releasing the slips.  

Spring Loaded Powerslip 


Model: ABSPS-27
https://www.autobahnindustries.com/spring-loaded-power-slips
Autobahn make Spring Loaded Power Slip (equvilant to Varco
PS15) is footoperated, designed to protect drill pipes and tubing
with slip range from 3½” to 4½” and 4½” to 5½” while setting and
releasing by simply changing inserts. The slip can be set simply by
applying foot pressure on the slip set ring. This eliminates the
manual setting and lifting of slip. The unit consists of four slip
segments with inserts and four coil spring cartridges as a counter
balance to offset the weight of slips when in the upper released
position. It is suitable to fit into 27½” and 37½” to 49½” Rotary
table with API Pin Drive Master Bushing.
The unit consists of three major assemblies as under:
1. Top Cover Assembly
Top cover assembly is ergonomically designed with two halves
with slip set ring. Top cover assembly is mounted on four slip
hangers with pins.
2. Slip Assembly
Four slip segments of 16½” grip length for gripping the tubular size
4½” to 5½” are dressed with 48 Nos Inserts, 4 Nos Insert Retaining
Ring and 8 Nos Allen Screw.
3. Bowl Assembly
Bowl assembly consists of two halves connected with bowl hinge
pin to enable the installation and removal of the power slip from
the Master Bushing. Bowl assembly is provided with four numbers
of Coil Spring Cartridges and Foot Pedal for releasing the slips.

You might also like