0% found this document useful (0 votes)
160 views3 pages

A Note About Kits.... : 8038 Signal Generator Kit

This document provides information about various electronic kits and components for sale, including: - An 8038 signal generator kit that produces triangular, square, and sine wave outputs from 50-5kHz. - A robotic arm kit with a 5-button wireless remote control and a gripper with 120° wrist and 300° elbow motion. - A square wave generator kit built around an NE555 chip with an adjustable output frequency range of 5-15VDC. - An LED flasher kit and LED chaser kit for creating lighting effects. - Various LED components like 12VDC round LEDs, flashing LEDs, and RGB color changing LEDs. - Mounting clips and housings

Uploaded by

beemasundar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
160 views3 pages

A Note About Kits.... : 8038 Signal Generator Kit

This document provides information about various electronic kits and components for sale, including: - An 8038 signal generator kit that produces triangular, square, and sine wave outputs from 50-5kHz. - A robotic arm kit with a 5-button wireless remote control and a gripper with 120° wrist and 300° elbow motion. - A square wave generator kit built around an NE555 chip with an adjustable output frequency range of 5-15VDC. - An LED flasher kit and LED chaser kit for creating lighting effects. - Various LED components like 12VDC round LEDs, flashing LEDs, and RGB color changing LEDs. - Mounting clips and housings

Uploaded by

beemasundar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

KITS 8038 SIGNAL GENERATOR KIT

Easy-to build. Parts are clearly


marked on the pc board.
A NOTE ABOUT KITS.... Requires soldering.
Kits cannot be returned or exchanged
• Built on ICL8038 IC
once assembly has begun.
• Frequency range: 50-5Khz
All parts supplied EXCEPT batteries.
• Triangular, square & sine wave output
ROBOTIC ARM - WIRELESS REMOTE • 10-450Khz • Power: 12-15 Vdc
Owikit# OWI-537 • Footprint: 59 x 44mm New Item
Robotic Arm Edge CAT # KT-SGM $6.75 each
Wireless uses Assembled version, CAT# SGM-1 $9.50 each
5-button wireless
remote control to 100 IN 1 STEM LAB KIT
command the 100 STEM experiments in one
gripper to open box. For ages
and close. Wrist motion of eight and up,
120°, with an elbow range kids will learn
of 300°. Base rotation of 270°, and base motion about basic
of 180°. Vertical reach of 15 inches, horizontal circuit
reach of 12.6 inches, and a lifting capacity of connections
100g. 9" x 6.3" x 15". 197 pieces. For ages 13+. as they
CAT# OWI-537 $49.95 each construct four
initial units (Maze Challenge,
For a similar item with a wired remote, Flying Disc, Turbo Air, and Alarm System).
see our CAT # OWI-535 $41.95 each Maze challenge allows children to build a carni-
val classic hand eye coordination game where
SQUARE WAVE GENERATOR KIT a metal loop is maneuvered around a metal
• Main Chip: NE555 wire without making contact; difficulty of the
• Input current: >=100MA wire can be adjusted. Flying Disc allows chil-
• Input Voltage: 5V-15VDC dren to launch a disc spinning into the air. By
• Output amplitude: using the auxiliary pieces designed for Turbo
4.2V V-PP to 11.4V V-PP Air children will use the air flow to create a bub-
• Maximum output current: >=15MA ble machine (bubble solution not included), vac-
• The output frequency range is selectable uum cleaner, or a floating foam ball! Alarm
• The output frequency is adjustable system lets children build a functioning spinning
CAT # KT-143 $4.35 each LED light with a loud beeping audio display.
CAT # OWI-38917 $39.95 each
DIY TANK KIT
Gear driven tank 6-IN-1 EDUCATIONAL SOLAR KIT
powered by two AA Use the snap-together
batteries (not included). plastic parts to build
A relatively simple to build, six different
no soldering required, educational motorized
kit. When fully assembled and switched on, this working models
tank rolls forward, and climbs small obstacles. including an airboat,
Includes parts, instructions (in Chinese, but windmill, puppy,
they are fairly easy to figure out by looking at car, and two
the photos) and a small screwdriver. different planes.
CAT # KT-069 $7.95 each No tools required
for assembly.
L.E.D. FLASHER KIT Kit includes plastic parts,
This kit includes parts and 75mA solar cell, 1.2V electric motor, wires,
instructions to make a springs and instruction book. For children 10+.
simple 2-LED flasher circuit. May require adult assistance.
A quick and easy project for CAT # KFK-2 $6.50 each
anyone with basic soldering skills.
Requires 9V battery (not included). RE/CO ROBOT
CAT# LEDKIT $3.50 ea. • 100 for $3.00 ea. It can be controlled wirelessly,
and has tank-like tracks
LED CHASER KIT that are perfect for rugged
Build this variable speed conditions, or allow the
LED chaser. 10 leds flash robot to lead the way, using its infrared
sequentially at whatever sensor to find a clear path, in patrol mode.
speed you set them for. Provides STEM learning with infrared sensors,
Easy to build kit includes programming with easy directional commands,
pc board, parts and instructions. Ideal for spe- and having fun with the freedom of a handy
cial lighting effects, costumes, etc. Operates on wireless remote control. 6.30" x 6.89" x 3.74".
3 to 9 volts. PC board is 5" x 2.25". 106 pieces. For ages 8+.
CAT# AEC $6.95 each • 10 for $65.00 CAT # OWI-997 $35.95 each
VISIT OUR WEBSITE - WWW.AllElEcTRONIcS.cOm 7
12 VDC LEDS
Bright 5mm round LEDs with built-in resistors for 12Vdc, No external resistor required.
Works well on 4-12Vdc. Dimmer at lower voltages.
Color Lens Color CAT# Each 10 100
RED Red LED-12R .50 .45 .40
BLUE Milky-white LED-12BW .50 .45 .40
WHITE Milky-white LED-12W .50 .45 .40
GREEN Green LED-12G .50 .45 .40
WHITE Water-clear LED-12WP .50 .45 .40
BLUE Water-clear LED-12BP .50 .45 .40
YELLOW Yellow LED-12Y .50 .45 .40
SPECIAL - 5MM YELLOW 12 VDC LEDS
Prepped with 8" leads & resistor - ready for use with 10-20 Vdc.
CAT # LED-410 10 for $2.50 • 100 for 15¢ each

FLASHING LEDS 5mm Built-in flashing unit 3-5 Vdc. Diffused. High-brightness.
Color CAT# Price 100 1000
RED LED-4 2 for .90 .40 .30
GREEN LED-4G .50 .45 .40
WHITE LED-4W .50 .45 .40
BLUE LED-4B .50 .45 .40
YELLOW LED-4Y .50 .45 .40

5MM RGB COLOR CHANGING LEDS


Cycles through red-green-blue and combinations of RGB, yielding purple, white and other hues.
5mm water-clear package. Great for attention-getting displays, and jewelry.
Slow Rate -- fades in and out of each color approximately every 5 seconds.
Operates on 3.5Vdc.
CAT# LED-276 65¢ each • 10 for 55¢ each • 100 for 40¢ each
Rapid Rate -- changes color every second for ten seconds, then changes
color three or four times per second for ten seconds.
CAT# LED-231 60¢ each • 10 for 50¢ each • 100 for 40¢ each
Fluttering -- cycles through RGB colors at a very fast rate, giving the impression of a fluttering
red / blue light. Milky-white in off-state.
CAT# LED-232 2 for $1.00 • 100 for 40¢ each

PRESS-FIT MOUNTING CLIPS FOR LEDS
2 PIECE HOLDER FOR 5MM LEDS Black plastic. Mounts in 6.3 mm hole.
CAT# HLED-4 10 for $1.20 • 100 for 9¢ each • 1000 for 8¢ each
CLIPLITE HOLDERS FOR 5MM LEDS Colored polycarbonate lens diffuses and
increases viewing angle. Mounts in 0.25” hole in panels of 0.06” to 0.125” thickness.
X= R (RED), G (GREEN), Y (YELLOW), C (CLEAR)
CAT# HLDCL-X 3 for $1.05 • 100 for 28¢ each • 1000 for 26¢ each
CLIPS FOR 3MM LEDS 1 piece holder. Mounts in 4.5mm hole.
CAT# HLED-5 10 for $1.00 • 100 for 8¢ each • 1000 for 7¢ each

LED INDICATOR 12 VDC W/ PLASTIC HOUSING


ASSEMBLIES Threaded bushings with nuts.
Solder-lug terminals. 2 sizes,

12 VDC
4 colors (red, green, blue, yellow).

W/ CHROME HOUSING
10mm diameter lens. 10mm bushing.
CAT# IND-10(R,G,B,Y) $1.25 each
10 for $1.10 each
5mm diameter LED in 10mm diameter 12mm diameter lens. 12mm bushing
chrome bezel. 8mm threaded bushing CAT# IND-12(R,G,B,Y) $1.35 each
with mounting hardware. 10 for $1.15 each
Extends 34mm below mounting panel.
Available in Red (R), Blue (B), 12 VDC RED LED
Green (G) and Amber (A). 5mm red diffused LED. Press-fit mounting in
CAT# IND-160(R,B,G, A) 0.25” diameter hole. Two 10” pigtail leads.
$2.25 each CAT# LED-12VR $1.15 each
10 for $1.05 each • 100 for 90¢ each
14 VISIT OUR WEBSITE - WWW.allElEcTROnIcS.cOm
MINI BAYONET BASE LAMPS PEN SIZED, POCKET New Item
INSPECTION LIGHT
#1815 lamp. 14.0 volts, 0.200 amps. The Nebo
CAT# LP-1815 80¢ each INSPECTOR is
100 for 70¢ each an innovative, powerful pocket light that outputs
#47 lamp. 6.3 volts, 0.150 amps. New Item 180 lumens, with 3 light modes and 3x ad-
CAT# LP-47 75¢ each • 100 for 65¢ each justable zoom that provide the perfect amount
of light for any situation. The INSPECTOR is
BAYONET BASE LAMP SOCKETS also waterproof (IP67) and features a remov-
able steel clip and Soft-Touch Technology,
For use with #44, 47, which provides momentary operation when the
1815 etc... standard light is off, with the slight touch of the button.
mini-bayonet base lamps. CAT # FL-671 $19.99 each
CAT# LHL-37
2 for $1.00
POCKET LIGHT W/ LASER POINTER
PC leads. AND POWER BANK New Item
0.40" (10mm) lead spacing. The Nebo SLIM+ is a thin,
CAT # LHL-46 2 for $1.00 ergonomic rechargeable 700 lumen
PC / solder leads. pocket light with a red laser pointer and
CAT# LS-17 a Power Bank for your USB powered
3 for 99¢ devices. Equipped with full dimming and

12 VDC FLASH ASSEMBLY
Power Memory Recall, the SLIM+ also
features a detachable magnetic pocket
clip, collapsible hanging hook and
powerful magnetic base for convenient
Bright xenon strobe assembly hands-free lighting.
for highway emergency CAT # FL-685 $34.99 each
signal. Approximately
80 flashes per minute.
12Vdc operation. FLASHING ROAD HAZARD FLARE
Horseshoe flash tube Flashing roadside emergency LED
(31.5 x 16 x 6mm) mounted on 65 x flare with flashlight. Features
75mm pc board. On/off switch. Easy to connect. ten different flashing patterns.
See hook-up diagram on-line spec sheet. Contains a hook and strong
CAT# FSH-13 $4.50 ea. • 10 for $4.00 ea. magnet for placement on vehicle.

1W LED W/ REFLECTOR
Powered by 3 AAA batteries
(not included). 4.0" diameter x 1.5" high.

IN HOUSING
CAT # ERL-1 $11.95 each

Great beginning for a shelf


PORTABLE LED LANTERN LIGHT
or display lighting project. Battery operated, light-weight
Bright, white 1 Watt LED portable LED lantern light.
enclosed in a rugged black Ultra-bright led light is useful for
and yellow hard plastic housing camping, hiking and emergency
with a conical reflector and a clear situations. Features: 360-degree
plastic front lens. Overall dimensions, illumination, adjustable light setting.
2.16" diameter x 3.45" long. Two wire leads. Easily collapses to 5" high, expands
Operates on 3 Vdc @ 300 mA. For higher to approximately 7.40" high.
voltages use a dropping resistor. 3.4" dia. magnetic base conveniently
CAT# LMP-26 $2.50 each attaches to metal fixtures. Requires
3 AA batteries (not included).
10 for $2.25 each
CAT # PLL-1 $6.95 each

LIGHTS KEYRING POPLITE


170 LUMEN WORK LIGHT -- BRIGHT Versatile, compact light and lantern
Nebo 6327 LarryC. EXTREMELY BRIGHT! by NEBO. Change from flood light,
Equipped with new C·O·B LED technology, to spot light, to lantern by sliding
it outputs 170 lumens of intense light. the body of the light. Small
The 180° rotating magnetic clip allows for enough to fit on a key ring,
hands-free lighting. The reinforced plastic the POPLITE also features a
body design is water and impact-resistant. magnetic base attached to a carabiner clip.
Top-positioned, ON/OFF button. Powered Comes in various colors (black, silver, red),
by 3 AAA batteries (included). 6.375" long. no choice of color. 2.52" compacted,
Includes retail box. Comes in red, blue, 3.66" extended. 0.75" diameter.
black or yellow (no choice of color). Powered by 3 LR44 batteries (included).
CAT# FL-170 $8.99 each CAT # FL-99 $5.99 each

ORDER TOLL FREE 1-800-826-5432 17

You might also like