0% found this document useful (0 votes)
504 views5 pages

Health Monitoring System Using 7-Segment Display & Atmega Microcontroller

This health monitoring system uses a microcontroller and 7-segment displays to continuously monitor a patient's heart rate and temperature. It can detect if the temperature or heart rate exceed set limits, triggering an alarm and switching off a load. This helps alert caregivers if the patient needs assistance. The system displays the readings on the 7-segment modules and allows limits to be set for temperature and heartbeat.

Uploaded by

MathuseRex
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
504 views5 pages

Health Monitoring System Using 7-Segment Display & Atmega Microcontroller

This health monitoring system uses a microcontroller and 7-segment displays to continuously monitor a patient's heart rate and temperature. It can detect if the temperature or heart rate exceed set limits, triggering an alarm and switching off a load. This helps alert caregivers if the patient needs assistance. The system displays the readings on the 7-segment modules and allows limits to be set for temperature and heartbeat.

Uploaded by

MathuseRex
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 5

Health Monitoring System using 7-

Segment Display & Atmega


Microcontroller

This health monitoring system is a very useful system, which can be used to
monitor the health parameters of the patient. This system continuously monitors
the heart rate and the temperature reading of the patient. In this health
monitoring system project, we use two 7 segment modules to display the
parameters, as the display has a greater viewing distance. We can select the
upper limit and lower limit for the temperature and heartbeat as well. While
monitoring, if the temperature is increased beyond the set high limit or is
decreased below the set limit then the buzzer sounds and the load turns off.
Similarly, when we remove the heartbeat sensor and system detects low
heartbeat and buzzer buzzes and the load is switched off. This buzzer can help
the patient’s well-wishers to take action in an emergency. When the temperature
and heart rate come into control the bulb turns on and the alarm gets off.

Block Diagram :
Hardware Specifications :

 7 segment display module

 Heart beat sensor

 Temperature sensor

 Crystal Oscillator

 Capacitors

 Resistors

 Transistors

 Cable and Connectors

 Diode

 PCB
 

 LED

 Adapter

 Push button

 IC

 IC Socket

 Relay

 Regulator

 Buzzer

Software Specifications :

 Arduino Compiler
 MC Programming Language: C

You might also like