NX400 Spec Sheet
NX400 Spec Sheet
NX400 Spec Sheet
making digital broadcasting work phone +1.902.823.2233 fax +1.902.823.3183 info@nautel.com www.nautel.com
Transmitter
Nautel Ltd. 10089 Peggy’s Cove Rd Hackett’s Cove, NS B3Z 3J4 Canada
NX400 AM
making digital broadcasting work phone +1.902.823.2233 fax +1.902.823.3183 info@nautel.com www.nautel.com
Transmitter
PHY SICAL Intermodulation Distortion Controller
SMPTE 1:1 Ratio, 60Hz/7kHz, 95% Mod Peak - PDM and RF Drive Levels
Dimensions
0.5% @ 400kW (typical) Ambient Temp
Transmitter Cabinet
DIM-B, 2.96kHz/9kHz, 80% Mod Peak - 0.5% @
184.2* cm H x 383 cm W x 120 cm D RF Monitor
400kW
(72.4" H x 150.8" W x 47.2" D) RF monitor is a power sample (using a
*not including antenna grounding switch Carrier Shift directional coupler) that will allow for accurate
0.5% or less audio performance measurements
External Transformer Cabinet
203.2 cm H x 185.4 cm W x 114.3 cm D Hum and Noise Status
(80" H x 73" W x 45" D) -65 dB or better below 400kW, Easy access to current transmitter operating state,
100% modulation past and present alarm conditions and historical
Weight trends of both digital and analog channels
Main transmitter cabinet with modules installed:
2268 kg (5000 lbs)
CO NT RO L AND Schedule
MONIT ORING Intuitive easy to read built in scheduler
Power transformer: Up to 144 yearly rules can be defined by user
Extensive Control/Monitoring/Troubleshooting
2000 kg (4400 lbs)
system through 17" front panel LCD touchscreen. Remote Control/ Monitoring
Touch panel control system is non-critical and may Three Remote interfaces:
A UDIO
be removed from the system without affecting
PERFORMANCE transmitter operation or remote control/monitor • Direct wired optically isolated inputs and open
Analog Broadcast Inputs via direct wired connections. Redundant back-up collector outputs
Dual AES-EBU Digital Audio inputs* adjustable from control interface provides control in case of front • Web interface - All locally available control is
-30dBFS to 0dBFS for 100% modulation panel computer system failure. Built in instrumenta- available over TCP/IP web interface
tion providing detailed spectrum/impedance and • SNMPv1
600 ohms balanced analog audio input +10 dBm
modulation analysis.
nominal for 100% modulation, adjustable from -10
COMPLIANCE
to +12 dBm Metering
Cube Product complies with:
Digital Broadcasting Inputs
DC Voltages (B+, PA and 15V) • ISED specification BETS-5 issue 1
I,Q over AES-EBU, SRC available* with sample rate
DC Current
converter • FCC CFR title 47 part 2 and part 73
Sample Levels (PDM and RF Drive)
I,Q over LVDS, 3 pairs, Clock, Data, frame sync • Conforms with all essential requirements of
Fan Speeds
*Two AES-EBU inputs provided and may be used Radio European Directive 2014/53/EU
Heat Sink Temperature
for either analog audio or digital I,Q inputs
Rack
Optional DRM Generator/Content Server DC Voltage levels (15V, 5V, 30V, 48V
and B+) Notes:
Optional Embedded HD Radio Generator
Rectifier Fan Speeds Specifications defined in a laboratory environment
(Exgine™)
DC Current with high grade source and demodulation equip-
Frequency Response Rectifier Heat Sink Temperature ment. Standard factory measurements does not
+0.2 dB/-0.8 dB, 30 Hz to 10,000 Hz. AC Voltage include all items.
Optional audio input filters available to meet
Exciter
regional bandwidth restrictions
Output Current (RMS, Peak, Carrier)
Total Harmonic Distortion Output Voltage (RMS, Peak, Carrier)
Better than 0.8% (THD), 30 Hz to 10,000 Hz Forward Power (RMS, Peak, Carrier)
at 95% modulation (typical) Reflected Power (RMS, Peak, Carrier)
Audio/Modulation Levels (RMS and
Peak - Positive/Negative)
Load Impedance
Nautel Ltd. 10089 Peggy’s Cove Rd Hackett’s Cove, NS B3Z 3J4 Canada