Scribd
Upload
149 views4 pages

8402 Smart ODME Data Sheet

The document summarizes the Smart ODME system, which monitors and controls ballast water discharge to comply with MEPC 108(49) requirements. The Smart ODME measures oil content, incorporates starting interlocks and automatic overboard valve control. It stores calibration data and discharge measurements, and can interface with a PC. The system is designed for ease of use and maintenance to help vessels meet MARPOL regulations for oil tankers over 150 GRT.

Uploaded by

Pankaj
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
149 views4 pages

8402 Smart ODME Data Sheet

The document summarizes the Smart ODME system, which monitors and controls ballast water discharge to comply with MEPC 108(49) requirements. The Smart ODME measures oil content, incorporates starting interlocks and automatic overboard valve control. It stores calibration data and discharge measurements, and can interface with a PC. The system is designed for ease of use and maintenance to help vessels meet MARPOL regulations for oil tankers over 150 GRT.

Uploaded by

Pankaj
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

SMART ODME

Smart ODME Computer Module

Smart ODME Pump - Measuring Cell

The Oil Discharge Monitoring Equipment (Smart ODME) installed, incorporating an approved oil content meter, with

has been designed to provide means of monitoring, a starting interlock and an automatic overboard valve

control system. The Smart ODME includes all components


recording and controlling the ballast discharge in
required to meet MEPC 108(49) and is designed for ease of
accordance with the requirements of MEPC 108(49).
operation, installation and maintenance.
Discharge limits are set at 30 Litres per nautical mile and a Incorporates a ‘simulation operating mode’ to aid system

total discharge expressed as a proportion of the previous demonstration to PSC surveyors.

The requirements in IMO Resolution MEPC 108(49) apply to


cargo for dirty ballast.
tankers with a date of keel laying or equivalent stage of
The requirements of the MARPOL Convention are that all
construction of 1st of January 2005 or later.
oiltankers with a gross tonnage of 150 GRT and above must

have an oil discharge monitoring and control system For more detailed technical specification, please see over:
SMART ODME

Measurement
Oil types: As Per MEPC 108(49) Requirements
Clean water calibration: Automatic
Oil measurement range: 0 - 1000 ppm all types
Resolution: 1 ppm
Accuracy oil + solids: As Per MEPC 108(49) Requirements
User Interface
Display: 4 line x 20 alphanumeric back lit LCD display
Control + Setup: 3 button keypad incorporating real time system display
Input / Output
Output: USB and RS232
Log Input: 200 Contact Closures per nautical mile
GPS: NMEA 0183
Data Storage and Retrieval
Calibration data: Stored onboard microcontroller
Storage data: Stored onboard mounted memory media
Data retrieval: via LCD display or download to PC with Hyperterminal
Environmental & Sample
Ambient temperature: -10 to +50°C
Sample / clean water flow rate: 0.5 - 4.0 litres / min
Sample / Inlet pressure: 1 bar
System and Supply
Supply voltage:
Zenner Barrier/Computer Module: 115 / 230V ac, 50 - 60Hz (Switchable)
Motor: 380-440V ac, 50-60Hz, 3 phase
Supply voltage Consumption: < 50 VA including solenoid valve
Approvals: IMO MEPC 108 (49) and GL + USCG
Mounting options: 3U 19” Rack or Cabinet (Computer Module)
O D M E L AY O U T
RIVERTRACE ENGINEERING
MARINE PRODUCTS

Rivertrace Engineering is a market leader with

over 25 years experience of Oil in Water


Monitoring. RTE manufacture oil content monitors

for the marine, offshore and industrial markets

with up to date engineering solutions


incorporating PFM technology. Our client list
includes most of the worlds’ separator OEMs,

shipyards and vessel operators. We have IMO

type approvals for both Bilge and Ballast


monitors. Our global network of agents ensures
local service at most ports.

SMART CELL 15ppm OCM MEPC 107 (49)

SMARTSAFE - Bilge Overboard Security System OCD 50M - Boiler Condensate/Cooling


water monitor

S P E C I A L I S T I N W A T E R Q U A L I T Y M O N I T O R I N G

Rivertrace Engineering Limited


Unit P, Kingsfield Business Centre Philanthropic Road Redhill Surrey RH1 4DP England
Tel: +44 (0)1737 775500 Fax: +44 (0)1737 775501 Email: [email protected] www.rivertrace.com
ISO 9001 FM 40958
PubNo: 1/0710/0

You might also like