Activator 100 T 3 (Fast-Slow) SL NO 2

MATERIAL SAFETY DATA SHEET
1. Identification of substance
Product Information :
Trade Name : ACTIVATOR 100 T 3 (Fast/ Slow)
Manufacturer / Supplier : Gargi Huttenes Albertus Pvt. Ltd.
D –360/ 361, TTC Indl. Area, Shirwane
Nerul, Navi Mumbai – 400 706
Contact Nos.: + 91 22 27626001/ 27626002/27626005
2. Composition / Data on Components :
Chemical Characterization:
Description :
Toluene –4 Sulphonic acid (65%) in water
Dangerous components:
104 –15 – 4 toluene – 4 Sulphonic Acid 60% min
Xi; 36/37/38
7664 – 93 –9 Sulphuric Acid max. 2%
C; R 35
3. Hazards Identification:
Hazard designation : Xi Irritant
Information pertaining to particular dangers for man and environment
R – 36/37/38 Irritating to eyes, respiratory system and skin
Classification system
The classification is in line with current EC lists. It is expanded, however by
information from technical literature and by information furnished by supplier
companies.
Factory : GARGI HUTTENES ALBERTUS PVT. LTD. PLOT NO 360/361,
TTC INDL. AREA VILLAGE KUKSHET, NAVI MUMBAI –400706
1
4. First Aid measures
General information
Instantly remove any clothing soiled by the product.
After inhalation :
Take affected person into the open air and position comfortably. Consult doctor
immediately.
After skin contact:
Instantly wash with plenty of water and soap and rinse thoroughly
After eye contact

Rinse opened eye for several minutes under running water. If symptoms persist,
consult doctor.
After swallowing
Rinse out mouth and then slowly drink a glass of water, seek medical treatment.
5. Fire fighting measures :

Suitable extinguishing agents
Use fire fighting measures that suit the environment.
6. Accidental release measures:

Person related safety precautions: Wear protective equipment. Keep unprotected
person away.
Measures for environmental protection:

Prevent material from reaching sewage system , holes and cellars.
Measures for cleaning / collecting:
Absorb with liquid binding material (sand, diatomite, acid binders, universal binders)
Do not seal container gas tight
Additional information:
See section 8 for information on personal protection equipment
See section 13 for information on disposal.

2
7. Handling and storage:
Handling
Information for safe handling : Keep containers tightly sealed
Information about protection against explosions and fires.
No special measures required
The product is not flammable
Storage
Requirements to be met by storerooms and containers:
Use only containers specifically permitted for this substance/product
Provide acid resistant floor
Information about storage in one common storage facility: Do not store together with
alkalies (caustic solutions).
Further information about storage conditions:

Must be stored in a collecting room/
8. Exposure controls and personal protection:
Additional information about design of technical systems:

No further data , see item 7.
Components with critical values that require monitoring at the workplace:
The product does not contain any relevant quantities of materials with critical values
that have to be monitored at the work place.
Personal protective equipment

General protective and hygienic measures
The usual precautionary measures should be adhered to in handling the chemicals.
Instantly remove any soiled and impregnated garments
Wash hands during breaks and at the end of the work
Avoid contact with eyes and skin
Breathing equipments:
Use breathing protection only when aerosol or mist is formed.
3
Protection of hands: Acid resistant gloves
Eye protection : Tightly sealed safety glasses.
9. Physical and Chemical Properties:

Form : Fluid
Colour : Light Yellow
Smell : Weak, Characteristic
Change in condition :
Melting point / melting range - 10°C
Boiling point /melting range > 100°C
Flash Point None
Danger of explosion Product is not explosive.
Vapour pressure @ 30°C - 23 mbar (water)
Density @ 30°C 1.1 - 1.12 gm/cc
Solubility in / miscibility with water fully miscible
Viscosity @ 30°C by B4 type ford cup 13 – 15 secs
10. Stability and reactivity:

Thermal decomposition /conditions to be avoided
Stable until boiling point.
Dangerous reactions:
Reacts with metals forming hydrogen
Reacts with alkalies
Violent reaction with furan resins (furfural alcohol)
Dangerous products of decomposition : Sulphur dioxide
11. Toxicological information:

Acute toxicity
LD/LC 50 values that are relevant for classification
104 –15 –4 toluene – 4 Sulphonic acid
Oral : LD 50 : 1410 mg/kg (rat)
Primary irritant effect

On the skin: Irritant for skin and mucous membranes.
On the eye: Irritant effect
Sensitization : No sensitizing effect known

4
12. Ecological Information:
Information about elimination ( persistence and degradability)
Other information : The product is easily biodegradable.
General notes:
Do not allow product to reach ground water, lakes, rivers or sewage system.
13. Disposal considerations:

Product
Recommendation
Must not be disposed of together with household garbage. Do not allow product to
reach sewage system.
Disposal considerations:
Chemical /physical preliminary treatment
Hazardous waste, has to be incinerated.
Uncleaned packaging:
Recommendations:
Empty contaminated containers thoroughly. They can be recycled after thorough and
proper cleaning.
Recommended cleaning agent : Water, if necessary with cleaning agent.
14. Transport information:

Land transport ADR/RID and GGVS /GGVE (cross border /domestic)
ADR/RID –GGVS/E class : 8 Corrosive substances
Number /letter : 34 c
Kemler Number : 80
UN Number : 2586
Designation of goods : 2586 Arylsulphonic acids, liquid
Maritime transport IMDG /GGVSea:
IMDG/GGVSea class : 8
Page : 8105
UN number : 2586
Packaging group : III

MFAG : 700
EMS number : 8 – 06
5
Correct technical name: Arylsulphonic acids, liquid
Air transport ICAO –TI and IATA - DGR

IACO /IATA Class : 8
UN /ID Number : 2586
Packaging group : III
Correct technical name: Arylsulphonic acids, liquid
15. Regulatory information:

Designation according to EC guidelines
The product has been classified and labeled in accordance with EC
directives/relevant national laws.
Code letter and hazard designation of product :
Hazard determining components of labeling:
Hazard designation : Xi Irritant
Information pertaining to particular dangers for man and environment

R – 36/37/38 – Irritating to eyes, respiratory system and skin
Safety phrases :
26 – In case of contact with eyes, rinse immediately with plenty of water & seek
medical advise.
37 – Wear suitable protective clothing , gloves & eye /face protection.
16. Other information:

These data are based on our present knowledge. However, they shall not constitute a
guarantee for any specific product features and shall not establish a legally valid
contractual relationship.

6

Activator 100 T 3 (Fast-Slow) SL NO 2

Uploaded by

Copyright:

Available Formats

Activator 100 T 3 (Fast-Slow) SL NO 2

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Activator 100 T 3 (Fast-Slow) SL NO 2

Uploaded by

Copyright:

Available Formats

MATERIAL SAFETY DATA SHEET

Contact Nos.: + 91 22 27626001/ 27626002/27626005

2. Composition / Data on Components :

Information pertaining to particular dangers for man and environment

R – 36/37/38 Irritating to eyes, respiratory system and skin

After eye contact

5. Fire fighting measures :

6. Accidental release measures:

Measures for environmental protection:

Factory : GARGI HUTTENES ALBERTUS PVT. LTD. PLOT NO 360/361,

Further information about storage conditions:

8. Exposure controls and personal protection:

Additional information about design of technical systems:

Personal protective equipment

9. Physical and Chemical Properties:

10. Stability and reactivity:

11. Toxicological information:

Primary irritant effect

Factory : GARGI HUTTENES ALBERTUS PVT. LTD. PLOT NO 360/361,

13. Disposal considerations:

14. Transport information:

Packaging group : III

Air transport ICAO –TI and IATA - DGR

15. Regulatory information:

Information pertaining to particular dangers for man and environment

16. Other information:

Factory : GARGI HUTTENES ALBERTUS PVT. LTD. PLOT NO 360/361,

You might also like