DCT6088 Digital Correlation Transit Time Flowmeter

DCT6088 Digital Correlation
Transit Time Flowmeter

DCT6088 Digital Correlation
Transit Time Flowmeter
Applications
• HVAC
• Potable water
• Ultrapure liquids
• De-ionized water
• Petroleum products
• Water & waste management
Features
• Accuracy to +/-0.5%
• 0.001 ft/s flow sensitivity
• Up to 4 programmable relays
• Easy to install, clamp-on design
• Bi-directional flow measurement
• Powerful 50,000 point data logger
• TimeGate diagnostics & wave form analysis
The DCT6088 is the world’s most advanced transit time The plug-in, modular construction of the instrument sim-
flowmeter. Combining digital signal processing (DSP) with plifies field service and, in the unlikely event of failure,
correlation detection methods, it features exceptional permits boards to be replaced in seconds. The DCT6088
performance and flexibility. While principally designed for features over 90% parts commonality with the popular
clean liquid applications, the instrument is tolerant of liq- DDF4088 Doppler flowmeter, dramatically reducing spare
uids with higher concentrations of gas bubbles or en- parts inventory at sites where both technologies of meter
trained solids than was previously possible with transit are in service.
time technology. The non-intrusive, clamp-
on transducers can be installed without flow
interruption and insure leak-free measure-
ments with zero pressure drop. The simple
menu-driven operation of the DCT6088 al-
lows the meter to be commissioned in a
fraction of the time necessary for competi-
tive transit time flowmeters.
Housed in a rugged NEMA-4X (IP65) en-

closure and qualified for -40°C operation,
the DCT6088 is well suited to most indus-
trial environments. The standard display is
a high resolution, backlit LCD providing
excellent visibility, even in poorly lit condi-
tions. A vacuum fluorescent display is also
optionally available for install-
ations where a wide viewing angle or read-
ing from a distance is necessary. Outputs include a 12- The internal design provides plenty of
bit digital, optically isolated, 4-20mA analog signal and space to access the terminal blocks (lo-
RS232 serial interface. cated behind the removable base plate)
and configure the flowmeter via its inte-
One programmable relay is installed as standard and up gral keypad. In addition to password pro-
to three additional relays can be specified. A powerful tection, the enclosure can be locked to
50,000 point data logger, with non-volatile memory and avoid any chance of unauthorized tam-
programmable in intervals of 1 second or more, is also pering. All circuit boards are conformally
incorporated in the flowmeter. coated and shielded by protective plates
to prevent damage.
TimeGate Program
Supplied with each DCT6088 is the acclaimed TimeGate configuration and signal analysis program. While not neces-
sary to set up or operate the instrument, it provides a simple, Microsoft Windows based method to configure the
flowmeter and access the extensive waveform diagnostics available from the DCT6088. It can also be used to down-
load stored site and calibration data to multiple flowmeters, thus eliminating the need to program multiple meters
separately. In addition, it offers a paperless method of retrieving and archiving calibration data – simplifying the data
retention and reporting requirements necessary for ISO9000, OSHA and FDA compliance.
While the flowmeter can be fully set up

via its integral keypad, the TimeGate program
provides a simple and rapid means by which
multiple flowmeters can be configured. In addi-
tion, the waveform analysis allows the user to
easily determine the optimum location for
transducer installation.
Microsoft, Windows and Windows 95 are registered trademarks of Microsoft Corporation.
DCT6088 Specifications
Performance Specifications Functional Specifications
Flow Range: ± 0 to 50 ft/s (± 0 to 15 m/s) Outputs: 4-20 mA (into 1,000 Ohms), 12 bit,
Accuracy: ± 0.5% of velocity or
5 kV opto-isolated loop or self-powered.
± 0.05 ft/s (± 0 to 152 m/s)
typical on calibrated/digital output RS232 serial interface
Sensitivity: 0.001 ft/s (0.3 mm/s) at any Power Supply: 90-132 VAC and 190-250 VAC,
flow rate including zero 50/60 Hz. switch selectable.
Linearity: 0.1% of scale, digital output Keypad: 19 key with tactile action
Pipe Size: 1 in. to 200 in. (25mm to 5m) Display: 40 character, 2 line alphanumeric,
backlit LCD. Screens include:
Physical Specifications present and total flow, velocity,
signal strength and delta T.
Transmitter: NEMA 4X (IP65), flame retardant Data Logger: Greater than 50,000 data points,
fiberglass, reinforced polyester. time stamped. Programmable in
Transducers: Encapsulated design. one second intervals.
Standard cable length: 30 ft. (9m) Relays: 5 Amp, SPDT, fully programmable
Weight: Approximately 12 lbs. (5.4 kg) 1 standard, up to 4 total
Temperature: -40° to +300°F (-40° to 150°C): transducers
-40° to +140°F (-40° to +60°C): transmitter
For higher temperature, please consult factory.
Humidity: 0 to 100% RH
Ordering Information
Model Product Description Polysonics is approved to the
ISO 9001 quality standard.
DCT6088 Digital Correlation Transit Time Flowmeter
Code Screen
1 40 character, 2 line alphanumeric LCD
2 Vacuum fluorescent display
Code Relays
1 One relay, 5 Amp SPDT fully programmable
2 Two relays, 5 Amp SPDT fully programmable
3 Three relays, 5 Amp SPDT fully programmable
4 Four relays, 5 Amp SPDT fully programmable
Code Transducer Enclosure
1 NEMA 4X
2 NEMA 7
Code Transmitter Cable Length
30A 30 ft. (9m) cable - standard
or XXXXA Additional cable, max. 1000 ft. (305m),
10 ft. increments
Code Transducer Hazardous Area Certification
A CSA: Class I, Div. 2, Groups A,B,C,D
Class II, Div. 2, Groups E,F,G
Class III, Div. 2
B IS barriers installed in transmitter Polysonics is one of the world’s
CSA: Class I, Div. 1, Groups C,D,E,F,G - Entity leading suppliers of ultrasonic
Class II, Div. 1, Groups C,D,E,F,G - Entity flowmeters for petrochemical,
Class III, Div. 1, Groups C,D,E,F,G - Entity water and wastewater applications.
C IS barriers installed in transmitter

Cenelec (LCIE): EEx ia II B T6
Typical Model Number: DCT6088-1-1-1-30A-A
In addition to the DCT6088, other Polysonic

transit time flowmeters include a portable
instrument featuring NEMA 6 (IP67)
environmental sealing and a multi-channel
model for 2, 3 or 4 pipe operation.
A comprehensive range of award winning
digital Doppler ultrasonic flowmeters is also
available for aerated or solids bearing fluids.
®
Microsoft®
Windows®
Represented by:
Polysonics, Inc.
10335 Landsbury Drive
Suite 300
Houston, TX 77099, USA
Tel: (281) 879-3700
Fax: (281) 498-7721
www.polysonicsinc.com ISO 9001
Polysonics reserves the right to alter specifications without notice. Issue : 6088 / Oct. 1997

DCT6088 Digital Correlation Transit Time Flowmeter

Uploaded by

Copyright:

Available Formats

DCT6088 Digital Correlation Transit Time Flowmeter

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

DCT6088 Digital Correlation Transit Time Flowmeter

Uploaded by

Copyright:

Available Formats

DCT6088 Digital Correlation

Transit Time Flowmeter

Housed in a rugged NEMA-4X (IP65) en-

While the flowmeter can be fully set up

C IS barriers installed in transmitter

In addition to the DCT6088, other Polysonic

You might also like