Catalogo Festo
Catalogo Festo
Catalogo Festo
Key features
General
• Very sturdy poppet valve concept for • Pipe thread in sizes G1/8, G1/4,
all 3/2 and 5/2-way valves G1/2 and G3/4
• Pneumatic or electrical actuation • Tried-and-tested mounting using
with F solenoid coil hollow bolt on PAL or PRS rail
• With flow rates of up to 7500 l/min • Optimised response times with
patented U-ring and servo control
Solenoid coils
F solenoid coils
Voltage: Power consumption: • Selected types conform to the ATEX • Solenoid coil can be easily
• 12 to 230 V DC • 4.1 to 5.5 W DC directive for potentially explosive exchanged later
• 12 to 240 V AC (50 to 60 Hz) • 3.85 to 9 VA AC atmospheres • Solenoid coil not included in scope
of delivery
Variants
VL/O-3-... MFH-3-..., MOFH-3-... MFH-3-...-S
Depending on selected connections: • MFH-3-... These valves can be converted from This valve type can be used within a
Normally closed or normally open Normally closed one function to the other by rotating range of 0 to 0.8 MPa and also as
• MOFH-3-... the seal under the cover. MOFH (through flow when not
Normally open actuated) with a separate pilot line.
MFH-5-...-S
The external pilot air connection
means that these valves can also be
used with low operating pressures.
Key features
Manifold assembly
With PAL manifold rail With PRS manifold block
The Tiger Classic valves can be mount- A separate pressure level can be sup-
ed on manifold rails PAL with common plied to individual valves via hollow
supply port or on manifold blocks PRS bolts with threaded connection.
with common supply port and common
exhausts. The valves are mounted on
the rails and blocks with hollow bolts.
The manifold rail and manifold block
have 2 to 6 valve positions.
Vacant positions can be sealed on
manifold rails PAL with cap nuts, or
with cover plates on manifold blocks
PRS.
Type codes
001 Series 002 Valve function
MCH Solenoid valve, with armature tube for C solenoid coil, single 3 3/2-way valve
solenoid, normally closed 5 5/2-way valve
MFH Solenoid valve, with armature tube for F solenoid coil, single
solenoid, normally closed 003 Pneumatic connection
MOCH Solenoid valve, with armature tube for C solenoid coil, single
G18 G1/8
solenoid, normally open
G14 G1/4
MOFH Solenoid valve, with armature tube for F solenoid coil, single
solenoid, normally open G12 G1/2
JMFH Solenoid valve, with armature tube for F solenoid coil, double G34 G3/4
solenoid
JMFDH Solenoid valve, with armature tube for F solenoid coil, with dominant 004 EU certification
signal, double solenoid None
JH Pneumatic double pilot valve EX4 II 2GD
JDH Pneumatic double pilot valve with dominant signal
VL/O Pneumatic valve, monostable, normally open or closed 005 Pilot air
VL Pneumatic valve, monostable S External
Internal
Peripherals overview
Mounting on manifold block
13
12
11
13
12
9
1 11
10
8
1
7
9
6 8
2
1
4
2 5
Variants
MFH-5-... JMFH-5-...
Peripherals overview
Accessories
Brief description a Page/Internet
[1] Push-in fitting For connecting compressed air tubing with standard O.D. qs
QS
[2] Blanking plug 3 included in the scope of delivery of the manifold block PRS blanking plug
B
[3] Manifold block 48
PRS
[4] Silencer For mounting in exhaust ports –
[5] Hollow bolt For distributing compressed air or for separate compressed air supply 47
VT
[6] Solenoid valve For F solenoid coil –
MFH
[7] Solenoid valve For F solenoid coil –
JMFH
[8] F solenoid coil 50
MSFG, MSFW
[9] Illuminating seal For indicating the switching status 51
M...-LD
[10] Cover plate For covering a vacant position 49
PRSB
[11] Plug socket For valves MFH, JMFH 50
MSSD-F
[12] Connecting cable For valves MFH, JMFH 50
KMF
[13] Plug socket For valves MFH, JMFH 50
MSSD-F-S
Peripherals overview
Mounting on manifold rail
13
12
11
13
12
9
1 11
8 10
1 7
9
4
6
8
4
1
2 5
Variants
MFH-5-... JMFH-5-...
Peripherals overview
Accessories
Brief description a Page/Internet
[1] Push-in fitting For connecting compressed air tubing with standard O.D. qs
QS
[2] Blanking plug 1 included in the scope of delivery of the manifold rail PAL blanking plug
B
[3] Manifold rail 46
PAL
[4] Silencer For mounting in exhaust ports –
[5] Hollow bolt For distributing compressed air or for separate compressed air supply 47
VT
[6] Solenoid valve For F solenoid coil 4
MFH
[7] Solenoid valve For F solenoid coil 4
JMFH
[8] F solenoid coil 50
MSFG, MSFW
[9] Illuminating seal For indicating the switching status 51
M...-LD
[10] Cap nut For blanking a vacant position 47
VTM
[11] Plug socket For valves MFH, JMFH 50
MSSD-F
[12] Connecting cable For valves MFH, JMFH 50
KMF
[13] Plug socket For valves MFH, JMFH 50
MSSD-F-S
500 ... 7500 l/min
-P- Voltage
12, 24, 42, 48 V DC
24, 42, 48, 110, 230,
240 V AC
Safety data
Type MFH- ... -EX MOFH- ... -EX JMFH- ... -EX JMFDH- ... -EX
Max. switching frequency [Hz] 3 – 25 16
Max. positive test pulse with 0 signal [ìs] 2200
Max. negative test pulse with 1 signal [ìs] 37001)
ATEX
Type MFH- ... -EX, JMFH- ... -EX
ATEX category for gas II 2G
Type of ignition protection for gas Ex h IIC T4 Gb
ATEX category for dust II 2D
Type of ignition protection for dust Ex h IIIC T130°C Db
Explosion-proof ambient temperature [°C] –5 <= Ta <= +40
CE marking (see declaration of conformity) To EU Explosion Protection Directive (ATEX)
Degree of protection IP65 (in assembled state)
Electrical data
F solenoid coil
Electrical connection Plug pins for plug sockets MSSD-F, KMF
Operating voltage Direct voltage [V DC] 12, 24, 42, 48
Alternating voltage [V AC] 24, 42, 48, 110, 230, 240 (50 ... 60 Hz)
Characteristic coil data Direct voltage [W] 4.5
Alternating voltage [VA] Pull: 7.5
Hold: 6
Degree of protection to EN 60529 IP65 (in combination with plug socket)
5 5
p12/p14 [bar]
p12/p14 [bar]
4 4
3 3
2 2
1 1
0 0
-0.95 0 1 2 3 4 5 6 7 8 9 10 -0.95 0 1 2 3 4 5 6 7 8 9 10
p1 [bar] p1 [bar]
MFH-3-1/2-S MFH-3-3/4-S
6 6
5 5
p12/p14 [bar]
p12/p14 [bar]
4 4
3 3
2 2
1 1
0 0
-0.95 0 1 2 3 4 5 6 7 8 9 10 -0.95 0 1 2 3 4 5 6 7 8 9 10
p1 [bar] p1 [bar]
Materials
Sectional view
Type B1 B2 B3 B4 B6 D1 D2 D4 D5
@
M...-3-1/8 26 +0.2 3.5 3.5 – 22 G1/8 – M5 5.5
M...-3-1/8-S 2.7 M5
M...-3-1/4 30.4 ±0.15 5 5 – G1/4 – M5 6.5
M...-3-1/4-S 30.4 4 M5
M...-3-1/2 52 ±0.15 8 8 – G1/2 – M5 8.6
M...-3-1/2-S 52 G1/8
M...-3-3/4 68 ±0.15 8 8 – G3/4 – M5 8.6
M...-3-3/4-S 68 G1/8
Type H1 H2 H3 H4 H5 H6 H7 L1 L2
500 ... 3700 l/min
-P- Voltage
12, 24, 42, 48 V DC
24, 42, 48, 110, 230,
240 V AC
Safety data
Max. switching frequency [Hz] –
Max. positive test pulse with 0 signal [ìs] 2200
Max. negative test pulse with 1 signal [ìs] 3700
Electrical data
F solenoid coil
Electrical connection Plug pins for plug sockets MSSD-F, KMF
Operating voltage Direct voltage [V DC] 12, 24, 42, 48
Alternating voltage [V AC] 24, 42, 48, 110, 230, 240 (50 ... 60 Hz)
Characteristic coil data Direct voltage [W] 4.5
Alternating voltage [VA] Pull: 7.5
Hold: 6
Degree of protection to EN 60529 IP65 (in combination with plug socket)
6 6
5 5
p12/p14 [bar]
p12/p14 [bar]
4 4
3 3
2 2
1 1
0 0
0 1 2 3 4 5 6 7 8 9 10 0 1 2 3 4 5 6 7 8
p1 [bar] p1 [bar]
MFH-5-1/2-S
6
5
p12/p14 [bar]
0
0 1 2 3 4 5 6 7 8 9 10
p1 [bar]
Exhaust throttled
Exhaust unthrottled
Materials
Sectional view
Type B1 B2 B3 B4 B6 D1 D2 D4 D5
@
MFH-5-1/8 26 +0.2 3.5 ±0.15 3.5 ±0.15 – 22 G1/8 M5 M5 5.5
MFH-5-1/8-S 3.5 3.5 2.7 5.5 – 6.2
MFH-5-1/4 30.4 ±0.1 – 5 ±0.15 – G1/4 M5 6.5 ±0.14
MFH-5-1/4-S 4 Min. 6.5
MFH-5-1/2 52 ±0.15 – 8 – G1/2 G1/8 8.5
MFH-5-1/2-S
Type H1 H2 H3 H4 H5 H6 H7 L1 L2
600 ... 4500 l/min
-P- Voltage
12, 24, 42, 48 V DC
24, 42, 48, 110, 230,
240 V AC
Safety data
Type JMFH- ... -EX JMFDH- ... -EX
Max. switching frequency [Hz] 25 16
Max. positive test pulse with 0 signal [ìs] 2200
Max. negative test pulse with 1 signal [ìs] 3700
Electrical data
F solenoid coil
Electrical connection Plug pins for plug sockets MSSD-F, KMF
Operating voltage Direct voltage [V DC] 12, 24, 42, 48
Alternating voltage [V AC] 24, 42, 48, 110, 230, 240 (50 ... 60 Hz)
Characteristic coil data Direct voltage [W] 4.5
Alternating voltage [VA] Pull: 7.5
Hold: 6
Degree of protection to EN 60529 IP65 (in combination with plug socket)
5 5
p12/p14 [bar]
p12/p14 [bar]
4 4
3 3
2 2
1 1
0 0
0 1 2 3 4 5 6 7 8 9 10 0 1 2 3 4 5 6 7 8
p1 [bar] p1 [bar]
JMFH-5-1/2-S
6
5
p12/p14 [bar]
0
0 1 2 3 4 5 6 7 8 9 10
p1 [bar]
Materials
Sectional view
Type B1 B2 B3 B4 D1 D2 D4 D5
@
JMF...-5-1/8 26 +0.2 3.5 +0.15 3.5 +0.15 – G1/8 – M5 5.5
JMF...-5-1/8-S 2.7 M5
JMF...-5-1/4 30.4 ±0.1 – 5 – G1/4 – M5 Min. 6.5
JMF...-5-1/4-S 4 M5
JMF...-5-1/2 52 – 8 – G1/2 – M5 9.6 +0.2
JMF...-5-1/2-S 52 ±0.15 G1/8 8.5
Type H1 H2 H4 H6 H7 L1 L2
Peripherals overview
Mounting on manifold block Mounting on manifold rail
1 1
7 8
1
1
6 6
6 6
2
1
3 5
2 1
5
2 9
5 9
2
Accessories
Brief description a Page/Internet
[1] Push-in fitting For connecting compressed air tubing with standard O.D. quick star
QS
[2] Blanking plug 3 included in the scope of delivery of the manifold block PRS blanking plug
B 1 included in the scope of delivery of the manifold rail PAL
[3] Manifold block 48
PRS
[4] Manifold rail 46
PAL
[5] Silencer For mounting in exhaust ports u
500 ... 7500 l/min
Safety data
Type G1/8 G1/4 G1/2 G3/4
Max. switching frequency [Hz] 12 – – –
Max. positive test pulse with 0 signal [ìs] 2200
Max. negative test pulse with 1 signal [ìs] 3700
ATEX
Type VL ... -EX, J- ... -EX
ATEX category for gas II 2G
Type of ignition protection for gas Ex h IIC T4 Gb
ATEX category for dust II 2D
Type of ignition protection for dust Ex h IIIC T130°C Db
Explosion-proof ambient temperature [°C] –10°C <= Ta <= +60°C
CE marking (see declaration of conformity) To EU Explosion Protection Directive (ATEX)
6 6
5 5
p12/p14 [bar]
p12/p14 [bar]
4 4
1
3 3
1
2 2
2
1 1 2
0 0
-0.95 0 1 2 3 4 5 6 7 8 9 10 0 1 2 3 4 5 6 7 8 9 10
p1 [bar] p1 [bar]
6 6
5 5
p12/p14 [bar]
p12/p14 [bar]
4 4
1
3 3
1
2 2
2
1 1 2
0 0
-0.95 0 1 2 3 4 5 6 7 8 9 10 0 1 2 3 4 5 6 7 8 9 10
p1 [bar] p1 [bar]
5 5
p12/p14 [bar]
p12/p14 [bar]
4 4
3 3
2 2
1 1
0 0
-0.95 0 1 2 3 4 5 6 7 8 9 10 0 1 2 3 4 5 6 7 8 9 10
p1 [bar] p1 [bar]
Materials
Sectional view
Type B1 B2 B3 B5 D1 D3 D5 H3 H4 H5 H8 H9 L1
@
VL/O-3-1/8 26 3.5 3.5 3 G1/8 G1/8 5.5 12.5 19 22 65 8 45
VL/O-3-1/4 30.4 5 5 – G1/4 G1/8 6.5 17 24 29 80 8 50
VL/O-3-1/2 52 8 8 – G1/2 G1/4 8.6 30 38 49 118 10 80
VL/O-3-3/4 68 8 8 – G3/4 G1/4 8.6 34 44 56 138 10 92
Mounting diagram
500 ... 3700 l/min
Safety data
Type G1/8 G1/4 G1/2
Max. switching frequency [Hz] 12 – –
Max. positive test pulse with 0 signal [ìs] 2200
Max. negative test pulse with 1 signal [ìs] 3700
p12/p14 [bar]
4 4
3 3
2 2
1 1
0 0
0 1 2 3 4 5 6 7 8 9 10 0 1 2 3 4 5 6 7 8
p1 [bar] p1 [bar]
Exhaust throttled
Exhaust unthrottled
VL-5-1/2
6
5
p12/ p14 [bar]
4
3
2
1
0
0 1 2 3 4 5 6 7 8 9 10
p1 [bar]
Materials
Sectional view
1
[1] Housing Die-cast aluminium
– Seals NBR, TPE-U(PU)
Type B1 B2 B3 B5 D1 D3 D5 H3 H4 H5 H8 H9 L1
@
VL-5-1/8 26 3.5 3.5 3 G1/8 G1/8 5.5 13.5 19 23 85 8 45
VL-5-1/4 30.4 ±0.1 – 5.2 – G1/4 G1/8 6.5 12 24 28 96 8 50
VL-5-1/2 52 – 8 – G1/2 G1/4 9 32 38 51 159 10 80
Mounting diagram
600 ... 4500 l/min
Safety data
Type G1/8 G1/4 G1/2
Max. switching frequency [Hz] 12
Max. positive test pulse with 0 signal [ìs] 2200
Max. negative test pulse with 1 signal [ìs] 3700
5 5
p12/p14 [bar]
p12/p14 [bar]
4 4
3 3
2 2
1 1
0 0
0 1 2 3 4 5 6 7 8 9 10 0 1 2 3 4 5 6 7 8 9 10
p1 [bar]
p1 [bar]
JH-5-1/4 JDH-5-1/4
6 6
5 5
p12/p14 [bar]
p12/p14 [bar]
4 4
3 3
2 2
1 1
0 0
0 1 2 3 4 5 6 7 8 0 1 2 3 4 5 6 7 8
p1 [bar] p1 [bar]
JH-5-1/2
6
5
p12/p14 [bar]
0
0 1 2 3 4 5 6 7 8 9 10
p1 [bar]
Type B1 B2 B3 B5 D1 D3 D5 D6 H1 H4 H8 H9 L1
@ @
J...-5-1/8 26 3.5 3.5 3 G1/8 G1/8 5.3 5 132 19 120 8 45
J...-5-1/4 30.4 – 5 – G1/4 G1/8 6.5 5 149 24 138 8 50
J...-5-1/2 52 – 8 – G1/2 G1/4 9.6 +0.2 9.9 193 38 178 10 80
Accessories
Manifold rail PAL
Materials:
Rail: Anodised aluminium
Mounting bracket: Galvanised steel
Type B1 B2 B3 B4 B5 D1 D3 D4 H1 H2 H3 L5 L6 L7 L8 ß1 ß2
PAL-1/8-... 20 21 2 33.5 44.5 G1/8 G1/4 5.2 44 32 43 18 34 12 4 19 8
PAL-1/4--... 28 27 2 42 56 G1/4 G3/8 7 56 44 56 20 32 14 4 24 10
PAL-1/2-... 40 40 3 73 93 G1/2 G3/4 11 80 60 75 35 69 16 5 36 17
Accessories
Hollow bolt VT
For manifold rail PAL
Note on materials:
RoHS-compliant
Ordering data
Pneumatic connection Weight Material Part no. Type
[g]
G1/8 6 Chromated steel 8626 VT-1/8
G1/8 15 Anodised aluminium 5928 VT-1/8-11)2)
G1/4 15 Chromated steel 206147 VT-1/4-2
G1/2 30 Anodised aluminium 9986 VT-1/2
Material:
Wrought aluminium alloy
Ordering data
Pneumatic connection Weight Part no. Type
[g]
G1/8 5 9768 VTM-1/81)
G1/4 7 3099 VTM-1/4
G1/2 28 9987 VTM-1/2
Accessories
Manifold block PRS
Material:
Anodised aluminium
Type B1 B2 B3 B4 D1 D2 D3 H1 H2 H3 H4 L3 L4 L5 L6 L7 L8 ß1 ß2
PRS-1/8-... 28.5 22 12.5 10.8 G1/8 G3/8 6.6 80 56 38 28 23.5 7 27 7 12 5 8 14
PRS-1/4-... 34.5 27.5 14 14 G1/4 G1/2 6.6 92 62 48 31 29.2 5 31.4 7 14 6 10 17
Hollow bolt VT
For manifold block PRS
Material:
Chromated steel
Ordering data
Pneumatic connection Weight Part no. Type
[g]
G1/8 17 11539 VT-1/8-PRSK
G1/4 32 9499 VT-1/4-PRS
Accessories
Cover plate PRSB
For blanking vacant positions
Material:
Aluminium
Ordering data
Pneumatic connection Weight Part no. Type
[g]
G1/8 55 11687 PRSB-1/8
G1/4 80 11688 PRSB-1/4
Hollow bolt VT
For separate compressed air supply on
valve
Material:
Chromated steel
Ordering data
Pneumatic connection Weight Part no. Type
[g]
G1/8 16 12634 VT-1/8-AJK-P
G1/4 24 12910 VT-1/8-AJS-P1)
G1/4 45 12635 VT-1/4-AJ-P
Accessories
Ordering data – Solenoid coils
Description Voltage Cable length Part no. Type
[m]
F solenoid coils, without plug socket Data sheets a Internet: msfg
– 12 V DC – 34410 MSFG-12-OD
24 V DC and 42 V AC, 50 ... 60 Hz – 34411 MSFG-24/42-50/60-OD
42 V DC – 34413 MSFG-42-OD
24 V AC – 34415 MSFW-24-50/60-OD
48 V AC, 50 ... 60 Hz – 34418 MSFW-48-50/60-OD
110 V AC, 50 ... 60 Hz and 120 V AC, – 34420 MSFW-110-50/60-OD
60 Hz
230 V AC, 50 ... 60 Hz and 240 V AC, – 34422 MSFW-230-50/60-OD
60 Hz
240 V AC, 50 ... 60 Hz – 34424 MSFW-240-50/60-OD
Explosion-proof 24 V DC – 536931 MSFG-24-EX
24 V AC – 536932 MSFW-24-50/60-EX
110 V AC – 536933 MSFW-110-50/60-EX
230 V AC – 536934 MSFW-230-50/60-EX
Accessories
Ordering data – Illuminating seals Data sheets a Internet: mf-ld
Description Voltage Part no. Type
For F solenoid coils 12 ... 24 V DC 19143 MF-LD-12-24DC
230 V DC/V AC 19144 MF-LD-230AC