Scribd
Upload
143 views4 pages

Tutorial 2: Linear Interpolation: CNC Tutorials and Exercises Boxford DUET Tutorial 2

This document provides a tutorial on using linear interpolation (G01 code) to machine L-shaped slots in a plastic component using a 5mm slot drill. It includes a drawing of the component with dimensions, tables with absolute and incremental coordinate positions for points A through F, and example G-code programs in both absolute and incremental formats to cut the slots from point A to B to C to D to E to F and then return to the initial position.

Uploaded by

Miguel HP
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
143 views4 pages

Tutorial 2: Linear Interpolation: CNC Tutorials and Exercises Boxford DUET Tutorial 2

This document provides a tutorial on using linear interpolation (G01 code) to machine L-shaped slots in a plastic component using a 5mm slot drill. It includes a drawing of the component with dimensions, tables with absolute and incremental coordinate positions for points A through F, and example G-code programs in both absolute and incremental formats to cut the slots from point A to B to C to D to E to F and then return to the initial position.

Uploaded by

Miguel HP
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Boxford DUET Tutorial 2 CNC Tutorials and Exercises

Tutorial 2: Linear Interpolation

This tutorial illustrates the use of the G01 code; cutting takes place in a straight line
at a controlled feed rate.
Consider the component illustrated below; it is required to mill the two L shaped slots.

45

B C D

20
50

A F E
15

15 20 30
Y
80

Material: 15mm thick Plastic


X
Grooves: 5 wide x 2 deep
Tool change at: X 0, Y 0, Z 25
Tool used: 5mm Slot Drill

Absolute Co-ordinates
The absolute co-ordinates of the points are shown in the table below:

POINT A B C D E F T.C.
X 15 15 45 65 65 35 0
Y 15 35 35 35 15 15 0

The program can be written in tabulated format as shown on the following page.
Note:
G00 is a default value and need not be programmed. The first tool is selected when entering the program
into the computer.
Boxford DUET Tutorial 2 CNC Tutorials and Exercises

DRAWING DUET PROGRAMMING SHEET-MILLING SHEET No. 1 OF 1


NUMBER TUT 2/1
TITLE PROGRAMMED BY

SEQUENCE PREP MISC FEED SPINDLE


No. FUNCTION FUNCTION CO-ORDINATES RATE SPEED
NOTES
N G M X Y Z I J F S
ABSOLUTE PROGRAMMING N10 90
METRIC UNITS N20 71
TOOL CHANGE N30 0 0 25
SPINDLE N40 03 1500
2mm ABOVE POINT A N50 15 15 2
FEED TO 2 DEEP N60 01 –2 125
POINT B N70 01 15 35 125
POINT C N80 01 45 125
2mm ABOVE WORK N90 2
ABOVE POINT D N100 65
FEED TO 5 DEEP N110 01 –2 125
POINT E N120 01 15 125
POINT F N130 01 35 125
2mm ABOVE WORK N140 2
PARK POSITION N150 05 0 0 25
END OF PROGRAM N160 30
Boxford DUET Tutorial 2 CNC Tutorials and Exercises

Using compact format, the program for the component shown previously will be as
follows:
N10 G90
N20 G71
N30 X0 Y0 Z25
N40 M03 S1500
N50 X15 Y15 Z2
N60 G01 Z-2 F125
N70 G01 X15 Y35 F125
N80 G01 X45 F125
N90 Z2
N100 X65
N110 G01 Z-2 F125
N120 G01 Y15 F125
N130 G01 X35 F125
N140 Z2
N150 M05 X0 Y0 Z25
N160 M30
Incremental Co-ordinates
The incremental co-ordinates for the component are shown in the table below.
Using these co-ordinates the program can be written as shown as follows:

POINT TOOL A B C D E F T.C. FROM


CHANGE F
X 0 35 0 30 20 0 -30 -35
Y 0 35 20 0 0 -20 0 -15
PROGRAMMING SHEET

DRAWING DUET PROGRAMMING SHEET-MILLING SHEET No. OF


NUMBER
TITLE PROGRAMMED BY

SEQUENCE PREP MISC FEED SPINDLE


No. FUNCTION FUNCTION CO-ORDINATES RATE SPEED
NOTES
N G M X Y Z I J F S

You might also like