Scribd
Upload
86 views

Control Systems Block Diagram Reduction Www-Tutorialspoint

The document discusses rules for simplifying block diagrams: 1. Check for blocks in series and simplify using Rule 1. Check for blocks in parallel and simplify using Rule 2. 2. An example block diagram is reduced in 6 steps using the rules, shifting take-off and summing points as needed. 3. The transfer function of the simplified single-block diagram represents the overall system transfer function. Alternative methods like signal flow graphs can also be used to calculate transfer functions without reducing the block diagram.

Uploaded by

shrikris
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
86 views

Control Systems Block Diagram Reduction Www-Tutorialspoint

The document discusses rules for simplifying block diagrams: 1. Check for blocks in series and simplify using Rule 1. Check for blocks in parallel and simplify using Rule 2. 2. An example block diagram is reduced in 6 steps using the rules, shifting take-off and summing points as needed. 3. The transfer function of the simplified single-block diagram represents the overall system transfer function. Alternative methods like signal flow graphs can also be used to calculate transfer functions without reducing the block diagram.

Uploaded by

shrikris
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Home Jobs Tools Coding Ground Current Affairs UPSC Notes

Categories Search latest courses, ebooks and prime packs...

Control Systems - Block Diagram Reduction

Advertisements

Previous Page Next Page  

The concepts discussed in the previous chapter are helpful for reducing (simplifying) the block diagrams.

Block Diagram Reduction Rules


Follow these rules for simplifying (reducing) the block diagram, which is having many blocks, summing points and take-off points.
Rule 1 − Check for the blocks connected in series and simplify.

Rule 2 − Check for the blocks connected in parallel and simplify.


Rule 3 − Check for the blocks connected in feedback loop and simplify.

Rule 4 − If there is difficulty with take-off point while simplifying, shift it towards right.
Rule 5 − If there is difficulty with summing point while simplifying, shift it towards left.

Rule 6 − Repeat the above steps till you get the simplified form, i.e., single block.

Note − The transfer function present in this single block is the transfer function of the overall block diagram.

Example
Consider the block diagram shown in the following figure. Let us simplify (reduce) this block diagram using the block diagram reduction rules.

Step 1 − Use Rule 1 for blocks G1


1
and G2
2
. Use Rule 2 for blocks G3
3
and G4
4
. The modified block diagram is shown in the following figure.

Step 2 − Use Rule 3 for blocks G1


1
G2
2
and H1
1
. Use Rule 4 for shifting take-off point after the block G5
5
. The modified block diagram is shown in the following figure.
Step 3 − Use Rule 1 for blocks (G3
3
+ G4
4
) and G5
5
. The modified block diagram is shown in the following figure.

Step 4 − Use Rule 3 for blocks (G3


3
+ G4
4
)G5
5
and H3
3
. The modified block diagram is shown in the following figure.

Step 5 − Use Rule 1 for blocks connected in series. The modified block diagram is shown in the following figure.

Step 6 − Use Rule 3 for blocks connected in feedback loop. The modified block diagram is shown in the following figure. This is the simplified block diagram.

Therefore, the transfer function of the system is

2
2
Y (s) G1
1
G2
2
G (G3
3
+ G4
4
)
5 5
=
R(s) (1 + G1
1
G2
2
H1
1
){1 + (G3
3
+ G4
4
)G5
5
H3
3
}G5
5
− G1
1
G2
2
G5
5
(G3
3
+ G4
4
)H2
2

Note − Follow these steps in order to calculate the transfer function of the block diagram having multiple inputs.
Step 1 − Find the transfer function of block diagram by considering one input at a time and make the remaining inputs as zero.
Step 2 − Repeat step 1 for remaining inputs.

Step 3 − Get the overall transfer function by adding all those transfer functions.

The block diagram reduction process takes more time for complicated systems. Because, we have to draw the (partially simplified) block diagram after each step. So, to overcome this
drawback, use signal flow graphs (representation).
In the next two chapters, we will discuss about the concepts related to signal flow graphs, i.e., how to represent signal flow graph from a given block diagram and calculation of transfer
function just by using a gain formula without doing any reduction process.

You might also like