Veterinary Surgical

Instruments
 ASC – A Surgical Company

Scalpel Handles

Forceps

Dressing & Tissue Forceps

Scissors

Needle Holders

Retractors

Orthopedic

Contents

Special Note
ASC is carrying the full range of over 15.000 different Surgical Instruments.
Please do not hesitate to contact us for any Instruments which you do not find in this catalogue.

3
 Scapel Handles

Standard
10-0231-03 10-0231-05 10-0231-04 10-0213-04 10-0234-31 10-0234-35
No.3 No.3 No.3 No.3 No.3L No.3L
Solid Solid, with scale Solid Plastics Solid straight Solid angled

4
 Scapel Handles

10-0205-45
No.4L
Solid angled

Standard
10-0201-04 10-3001-00 10-0243-03 10-0205-41 10-3005-00 10-0238-07 10-0238-71 10-3010-00
No.4 No.4 No.4 No.4L No.7 No.7 No.7K No.5
Solid Graduated in mm Plastics Solid straight Long Solid Solid Solid

5
 FORCEPS

Halsted-Mosquito
Normal

13-3050-09 9 cm / 3½” 13-3051-09 13-3052-09 9 cm / 3½” 13-3053-09

13-0407-10 10 cm / 4” 13-0408-10 13-3052-10 10 cm / 4” 13-3053-10
13-3050-12 12 cm / 4¾” 13-3051-12 13-3052-12 12 cm / 4¾” 13-3053-12
13-0411-12 12.5 cm / 5” 13-0412-12 13-0413-12 12.5 cm / 5” 13-0415-12
13-3050-18 18 cm / 7” 13-3051-18 13-3052-18 18 cm / 7” 13-3053-18
13-3050-20 21 cm / 8¼” 13-3051-20 13-3052-20 21 cm / 8¼” 13-3053-20
1:2 Teeth 1:2 Teeth

Micro-Mosquito
Micro

13-3055-09 9 cm / 3½” 13-3056-09 13-3057-09 9 cm / 3½” 13-3058-09

13-0421-10 10 cm / 4” 13-0422-10 13-0423-10 10 cm / 4” 13-0424-10
13-0421-12 12 cm / 4¾” 13-0422-12 13-0423-12 12 cm / 4¾” 13-0424-12
1:2 Teeth 1:2 Teeth

6
 FORCEPS

Kelly Kelly-Rankin

13-0431-14 14 cm / 5½” 13-0432-14 13-0435-16 16 cm / 6¼” 13-0436-16

Straight Curved 13-3080-18 18 cm / 7” 13-3081-18
Straight Curved

Crile Crile-Rankin

13-0441-14 14 cm / 5½” 13-0442-14 13-0447-16 16 cm / 6¼” 13-0448-16

13-3095-18 18 cm / 7” 13-3096-18

13-3085-14 14 cm / 5½” 13-3086-14 13-3090-16 16 cm / 6¼” 13-3091-16

1:2 Teeth 1:2 Teeth 13-3097-18 18 cm / 7” 13-3098-18
1:2 Teeth 1:2 Teeth

7
 FORCEPS

Kelly Kelly-Rankin
Delicate Delicate

13-3100-14 14 cm / 5½” 13-3101-14 13-3105-16 16 cm / 6¼” 13-3106-16

Straight Curved 13-3105-18 18 cm / 7” 13-3106-18
Straight Curved

Crile Crile-Rankin
Delicate Delicate

13-3110-14 14 cm / 5½” 13-3111-14 13-3115-16 16 cm / 6¼” 13-3116-16

13-3120-18 18 cm / 7” 13-3121-18

13-3112-14 14 cm / 5½” 13-3113-14 13-3117-16 16 cm / 6¼” 13-3118-16

1:2 Teeth 1:2 Teeth 13-3122-18 18 cm / 7” 13-3123-18
1:2 Teeth 1:2 Teeth

8
 FORCEPS

Rochester-Pean Rochester-Ochsner

13-0511-14 14 cm / 5½” 13-0512-14 13-0515-14 14 cm / 5½” 13-0516-14

13-0511-16 16 cm / 6¼” 13-0512-16 13-0515-16 16 cm / 6¼” 13-0516-16
13-0511-18 18 cm / 7” 13-0512-18 13-0515-18 18 cm / 7” 13-0516-18
13-0511-20 20 cm / 8” 13-0512-20 13-0515-20 20 cm / 8” 13-0516-20
13-0511-22 22 cm / 8¾” 13-0512-22 13-0515-22 22 cm / 8¾” 13-0516-22
13-0511-24 24 cm / 9½” 13-0512-24 13-0515-24 24 cm / 9½” 13-0516-24
13-0511-26 26 cm / 10½” 13-0512-26 13-0515-26 26 cm / 10½” 13-0516-26
13-0511-30 30 cm / 12” 13-0512-30 13-0515-30 30 cm / 12” 13-0511-30
Straight Curved Straight Curved

Rochester-Pean Rochester-Ochsner
Delicate Delicate

13-3186-14 14 cm / 5½” 13-3187-14 13-3190-14 14 cm / 5½” 13-3191-14

13-3186-16 16 cm / 6¼” 13-3187-16 13-3190-16 16 cm / 6¼” 13-3191-16
13-3186-18 18 cm / 7” 13-3187-18 13-3190-18 18 cm / 7” 13-3191-18
13-3186-20 20 cm / 8” 13-3187-20 13-3190-20 20 cm / 8” 13-3191-20
13-3186-22 22 cm / 8¾” 13-3187-22 13-3190-22 22 cm / 8¾” 13-3191-22
13-3186-24 24 cm / 9½” 13-3187-24 13-3190-24 24 cm / 9½” 13-3191-24
13-3186-26 26 cm / 10½” 13-3187-26 13-3190-26 26 cm / 10½” 13-3191-26
13-3186-30 30 cm / 12” 13-3187-30 13-3190-30 30 cm / 12” 13-3191-30
Straight Curved Straight Curved

9
 FORCEPS

Pean-Nippon Kocher-Nippon

13-3193-14 14.5 cm / 5¾” 13-3194-14 13-3197-14 14.5 cm / 5¾” 13-3198-14

13-3193-16 16.5cm / 6½” 13-3194-16 13-3197-16 16.5cm / 6½” 13-3198-16
13-3193-18 18.5cm / 7¼” 13-3194-18 13-3197-18 18.5cm / 7¼” 13-3198-18
1:2 Teeth 1:2 Teeth

Dixon-Lovelace Heiss

13-3203-01 20 cm / 8”

13-3203-02 20 cm / 8” 13-3203-03
13-3200-16 16 cm / 6¼” 13-3201-16
1:2 Teeth

13-3204-01 20 cm / 8” 13-3204-02
1:2 Teeth 1:2 Teeth

FORCEP
10
 FORCEPS

Adson Rochester-Carmalt

13-3205-18 18 cm / 7” 13-3206-18

13-3210-16 16 cm / 6¼” 13-3211-16

13-3210-20 20 cm / 8” 13-3211-20
Straight Curved

13-3207-18 18 cm / 7” 13-3208-18

Bengolea Bainbridge

13-3212-20 20 cm / 8” 13-3213-20
13-3212-26 26 cm / 10¼” 13-3213-26
Straight Curved

13-3218-15 15 cm / 6” 13-3219-15
13-3218-18 18.5 cm / 7¼” 13-3219-18
Straight Curved

13-3214-20 20 cm / 8” 13-3215-20
13-3214-26 26 cm / 10¼” 13-3215-26
Straight Curved
1:2 Teeth 1:2 Teeth

11
 FORCEPS

Baby-Mixter Mixter

13-3390-14 14.5 cm / 5½” 13-3391-14 13-3395-14 14 cm / 5½”

Mixter-Baby Fergusson

13-0520-18 18 cm / 7“ 13-3295-17 17 cm / 6¾“ 13-3296-17

13-3295-20 20 cm / 8“ 13-3296-20

12
 FORCEPS

Jones Schaedel English Model

13-0982-05 5 cm / 2” 13-0976-09 9 cm / 3½“ 13-3625-09 9 cm / 3½“

13-0982-09 9 cm / 3½“

Backhaus Roeder

13-1016-09 9 cm / 3½“ 13-3630-11 11 cm / 4¼“

13-1016-11 11 cm / 4¼“ 13-3630-13 13 cm / 5”
13-1016-13 13 cm / 5” 13-3630-15 15 cm / 6“
13-1016-15 15 cm / 6”

Lorna

13-1020-10 10 cm / 4“
13-1020-13 13 cm / 5”

13
 FORCEPS

Foerster

14-3055-25 25 cm / 10” 14-3056-18 18 cm / 7”

Smooth jaws 14-3056-20 20 cm / 8”
14-3056-25 25 cm / 10“

18 cm / 7“
25 cm / 10“

14-3057-25 25 cm / 10” 14-3058-18 –

Smooth jaws 14-3058-20 20 cm / 8”
14-3058-24 –

14
 FORCEPS

Adson McIndoe

12-0269-12 12 cm / 4¾“ 12-0469-12

1:2 Teeth

12-0271-15 15 cm / 6“
Standard
12-0269-15 15 cm / 6“ 12-0469-15 12-2001-15 15 cm / 6“
1:2 Teeth 1:2 Teeth

Standard Standard Narrow Tissue Tissue

12-0402-10 10 cm / 4” 12-3020-10
12-0201-10 10 cm / 4” 12-0221-10 12-0402-11 11.5 cm / 4½” 12-3020-11
12-0201-11 11.5 cm / 4½” 12-0221-11 12-0402-13 13 cm / 5” 12-3020-13
12-0201-13 13 cm / 5” 12-0221-13 12-0402-14 14.5 cm / 5½” 12-3020-14
12-0201-14 14.5 cm / 5½” 12-0221-14 12-0402-16 16 cm / 6¼” 12-3020-16
12-0201-16 16 cm / 6¼” 12-0221-16 12-0402-18 18 cm / 7” 12-3020-18
12-0201-18 18 cm / 7” 12-0221-18 12-0402-20 20 cm / 8” 12-3020-20
12-0201-20 20 cm / 8” 12-0221-20 12-0402-23 23 cm / 9” 12-3020-23
12-0201-23 23 cm / 9” 12-0221-23 12-0402-25 25 cm / 10” 12-3020-25
12-0201-25 25 cm / 10” 12-0221-25 12-0402-30 30 cm / 12” 12-3020-30
12-0201-30 30 cm / 12” 12-0221-30 1:2 Teeth 2:3 Teeth

15
 Dressing & Tissue Dressing

Tissue USA USA

Standard Model Standard Narrow

12-3025-13 13 cm / 5“ 12-3030-13 12-3035-10 10 cm / 4“ 12-3040-12 12 cm / 4¾“

12-3025-14 14.5 cm / 5½“ 12-3030-14 12-3035-13 13 cm / 5“ 12-3040-13 13 cm / 5“
12-3025-16 16 cm / 6¼“ 12-3030-16 12-3035-14 14.5 cm / 5½“ 12-3040-14 14.5 cm / 5½“
3:4 Teeth 4:5 Teeth 12-3035-15 15.5 cm / 6“ 12-3040-15 15 cm / 6“
12-3035-18 18 cm / 7“
12-3035-21 21 cm / 8¼“
12-3035-25 25 cm / 10“
12-3035-31 31 cm / 12¼“

USA Model Stille

12-3045-12 12 cm / 4¾“
12-3045-13 13 cm / 5“
12-3045-14 14.5 cm / 5½“
12-3045-15 15.5 cm / 6“
12-3045-18 18 cm / 7“
12-3045-21 21 cm / 8¼“
12-3045-25 25 cm / 10“
12-3045-31 31 cm / 12¼“
1:2 Teeth
12-3050-15 15 cm / 6“ 12-3055-15 15 cm / 6“ 12-3060-15
1:2 Teeth 2:3 Teeth

16
 Dressing & Tissue Forceps

Micro-Adson Adson-Brown

12-0505-12 12 cm / 4¾“ 12-3230-12 12-0501-12 12 cm / 4¾“

With platform 7:7 Teeth
12-0501-12-9 12 cm / 4¾“
9:9 Teeth

Iris Feilchenfeld

12-3235-11 11.5 cm / 4½“ 12-3236-11 11.5 cm / 4½“ 12-3237-11 12-3245-07 7,5 cm / 3“

12-3240-11 11.5 cm / 4½“ 12-3241-11 11.5 cm / 4½“ 12-3242-11 12-3245-09 9 cm / 3½“

1:2 Teeth 1:2 Teeth 1:2 Teeth

12-3245-11 11.5 cm / 4½“

17
 Dressing & Tissue Forceps

Oehler, TC Standard, TC

0.5 0.5 0.5

12-3365-14T 14 cm / 5½” 12-3365-16T 16 cm / 6¼” 12-3370-14 T 14,5 cm / 5¾”

0.5 0.5 0.5

12-3365-18T 18 cm / 7” 12-3365-20T 20 cm / 8” 12-3370-20 T 20 cm / 8”
Normal Profile

0.5 0.5 0.5

12-3365-25T 25 cm / 10” 12-3365-30T 30 cm / 10” 12-3370-25 T 25 cm / 10”
Normal Profile

Adson, TC Micro Adson, TC Adson Brown, TC

0.5 0.5 0.4 0.5

12-0351-12T 12 cm / 4¾” 12-0353-12T 12-0347-12T 12 cm / 4¾” 12-0345-12T 12 cm / 4¾”
Mini Profile Normal Profile

0.5 0.5 0.4

12-0351-15T 15 cm / 6” 12-0353-15T 12-0347-15T 15 cm / 6”
Normal Profile Normal Profile Mini Profile

18
 Scissors

Standard Standard Standard

11-0201-10 10.5 cm / 4¼“ 11-0203-10 10.5 cm / 4¼“ 11-0205-10

11-0201-11 11.5 cm / 4½“ 11-0203-11 11.5 cm / 4½“ 11-0205-11
11-0201-13 13.0 cm / 5“ 11-0203-13 13.0 cm / 5“ 11-0205-13
11-0201-14 14.5 cm / 5½“ 11-0203-14 14.5 cm / 5½“ 11-0205-14
11-0201-15 15.5 cm / 6“ 11-0203-15 15.5 cm / 6“ 11-0205-15
11-0201-16 16.5 cm / 6½“ 11-0203-16 16.5 cm / 6½“ 11-0205-16
11-0201-18 18.5 cm / 7¼“ 11-0203-18 18.5 cm / 7¼“ 11-0205-18
11-0201-20 20.0 cm / 8“ 11-0203-20 20.0 cm / 8“ 11-0205-20
Straight Straight Straight

19
 Scissors

Standard Standard Standard

11-0206-11 11.5 cm / 4½“ 11-0208-11 11.5 cm / 4½“ 11-0210-11

11-0206-13 13.0 cm / 5“ 11-0208-13 13.0 cm / 5“ 11-0210-13
11-0206-14 14.5 cm / 5½“ 11-0208-14 14.5 cm / 5½“ 11-0210-14
11-0206-15 15.5 cm / 6“ 11-0208-15 15.5 cm / 6“ 11-0210-15
11-0206-16 16.5 cm / 6½“ 11-0208-16 16.5 cm / 6½“ 11-0210-16
11-0206-18 18.5 cm / 7¼“ 11-0208-18 18.5 cm / 7¼“ 11-0210-18
11-0206-20 20.0 cm / 8“ 11-0208-20 20.0 cm / 8“ 11-0210-20
Curved Curved Curved

20
 Scissors

Mayo Mayo Harrington

11-0271-14 14 cm / 5¾“ 11-0272-14 11-3050-22 22.5 cm / 9” 11-3055-22

11-0271-15 15 cm / 6” 11-0272-15 11-3050-30 30 cm / 12” 11-3055-30
11-0271-17 17 cm / 6¾” 11-0272-17 Straight Curved
11-0271-23 23 cm / 9” 11-0272-23
Straight Curved

Mayo Stille Mayo-Noble

11-3060-15 15 cm / 6“ 11-3065-15
11-3060-16 16 cm / 6¼” 11-3065-16
11-3060-17 17 cm / 6¾” 11-3065-17
11-3060-19 19 cm / 7½” 11-3065-19
11-3060-21 21 cm / 8½” 11-3065-21 11-3070-17 17 cm / 6¾“ 11-3071-17
Straight Curved Straight Curved

21
 Scissors

Metzenbaum Metzenbaum

11-0349-11 11.5 cm / 4½“ 11-0350-11 11-0365-15 15 cm / 6“ 11-0366-15

Straight Curved Straight Curved

Metzenbaum Metzenbaum

11-0351-14 Blunt/Blunt · 14,5 cm / 5½“ 11-0356-14 11-3100-18 18 cm / 7“ 11-3105-18

11-0353-14 Sharp/Blunt · 14,5 cm / 5½“ 11-0358-14 11-3100-20 20 cm / 8“ 11-3105-20
11-0355-14 Sharp/Sharp · 14,5 cm / 5½“ 11-0360-14 11-3100-23 23 cm / 9“ 11-3105-23
Straight Curved 11-3100-25 25 cm / 10“ 11-3105-25
11-3100-28 28 cm / 11“ 11-3105-28
11-3100-30 30 cm / 12“ 11-3105-30

22
 Scissors

Metzenbaum-Nelson

11-3110-18 18 cm / 7“ 11-3115-18 18 cm / 7“ 11-3120-18

11-3110-20 20 cm / 8“ 11-3115-20 20 cm / 8“ 11-3120-20
11-3110-23 23 cm / 9“ 11-3115-23 23 cm / 9“ 11-3120-23
11-3110-25 25 cm / 10“ 11-3115-25 25 cm / 10“ 11-3120-25
11-3110-28 28 cm / 11“ 11-3115-28 28 cm / 11“ 11-3120-28
11-3110-30 30 cm / 12“ 11-3115-30 30 cm / 12“ 11-3120-30

Metzenbaum-Nelson Lexer

11-3125-18 18 cm / 7“ 11-3130-16 16 cm / 6¼“ 11-3135-16

11-3125-20 20 cm / 8“ 11-3130-21 21 cm / 8½“ 11-3135-21
11-3125-23 23 cm / 9“ Straight Curved
11-3125-25 25 cm / 10“
11-3125-28 28 cm / 11“
11-3125-30 30 cm / 12“

23
 Scissors

Metzenbaum-Fino

11-0427-14 14.5 cm / 5½“ 11-0428-14 14.5 cm / 5½“ 11-0429-14 14.5 cm / 5½“ 11-0430-14
11-0427-18 18 cm / 7“ 11-0428-18 18 cm / 7“ 11-0429-18 18 cm / 7“ 11-0430-18
11-0427-20 20 cm / 8“ 11-0428-20 20 cm / 8“ 11-0429-20 20 cm / 8“ 11-0430-20
11-0427-23 23 cm / 9“ 11-0428-23 23 cm / 9“ 11-0429-23 23 cm / 9“ 11-0430-23
Slender pattern Slender pattern Slender pattern Slender pattern

Lexer-Fino Lexer-Baby

11-3140-16 16 cm / 6¼“ 11-3145-16 11-3150-10 10 cm / 4“ 11-3151-10

Slender pattern Slender pattern Straight Curved

24
 Scissors

Iris-Fine

11-3345-11 11 cm / 4½“ 11-3346-11 11-3350-09 9 cm / 3½“ 11-3355-09

Straight Curved 11-3350-10 10.5 cm / 4¼“ 11-3355-10
Straight Flat Curved Flat

11-3351-09 9 cm / 3½“ 11-3356-09

11-3351-10 10.5 cm / 4¼“ 11-3356-10
Straight Round Curved Round

Iris Stevens

11-0731-11 11.5 cm / 4½“ 11-0732-11 11-3360-11 11 cm / 4½” 11-3365-11

Flat Flat 11-3361-10 10 cm / 3¾” 11-3366-10

11-2030-11 11.5 cm / 4½“ 11-2035-11 11-3362-10 10 cm / 3¾” 11-3367-10

Round Round With With
large rings large rings

11-0734-11 11.5 cm / 4½“ 11-0736-11 11-3370-11 11 cm / 4½” 11-3375-11

11-3371-10 10 cm / 3¾” 11-3376-10
11-2036-11 9 cm / 3½“ 11-2037-11
Round Round 11-3372-10 10 cm / 3¾” 11-3377-10
With With
large rings large rings

25
 Scissors

Strabismus Kilner

11-3380-11 11.5 cm / 4½“ 11-3381-11 11-0695-11 11.5 cm / 4½“ 11-0696-11

Straight Curved Straight Curved

Spencer Spencer Littauer

11-0925-09 Normal· 9 cm / 3½”

11-3390-09 Angled · 9 cm / 3½”
11-3391-09 Delicate · 9 cm / 3½” 11-0927-13 13 cm / 5” 11-3400-13 11-0935-14 14 cm / 5½”
11-3392-09 Delicate, Angled · 9 cm / 3½” Straight Side bend

11-3395-11 Normal· 11 cm / 4¼”

11-3396-11 Angled · 11 cm / 4¼”
11-3397-11 Delicate · 11 cm / 4¼”
11-3398-11 Delicate, Angled · 11 cm / 4¼”

26
 Scissors

Crown-Beebee

11-0971-10 10 cm / 4” 11-0972-10 11-0975-10 12 cm / 4¾” 11-0976-10

Straight Curved 1 Blade   1 Blade
saw edge saw edge
Straight Curved

Universal Locklin Locklin

11-0966-12 12 cm / 4¾“ 11-0708-16 16 cm / 6¼“ 11-0706-16 16 cm / 6¼“

Serrated

27
 Micro Scissors

Westcott

11-3505-11 11.5 cm / 4½“ 11-3506-11 11-3510-09 9 cm / 3½” 11-3515-11 11 cm / 4½”

11-3520-12 12 cm / 5” 11-3525-09 9 cm / 3½”

28
 Bandage Scissors

21-2001-14 Black · 14.5 cm / 5¾“ 21-0310-18 Black · 18 cm / 7“

21-2002-14 Red · 14.5 cm / 5¾“ 21-2010-18 Red · 18 cm / 7“
21-2003-14 Blue · 14.5 cm / 5¾“ 21-2011-18 Blue · 18 cm / 7“
21-2004-14 Yellow · 14.5 cm / 5¾“ 21-2012-18 Yellow · 18 cm / 7“
21-2005-14 Orange · 14.5 cm / 5¾“ 21-2013-18 Orange · 18 cm / 7“
21-2006-14 Bright pink · 14.5 cm / 5¾“ 21-2014-18 Bright pink · 18 cm / 7“

Knowles Lister / Lister TC

TC
21-0261-14 14 cm / 5½” 21-2020-14 21-0266-09 9 cm / 3½“ 11-3570-09T
Straight Angled 21-0266-11 11 cm / 4½“ 11-3570-11T
21-0266-14 14 cm / 5½“ 11-3570-14T
21-0266-16 16 cm / 6¼“ 11-3570-16T
21-0266-18 18 cm / 7” 11-3570-18T
21-0266-20 20 cm / 8” 11-3570-20T
without TC with TC

29
 Scissors. with Tungsten Carbide Inserts

Standard, TC Standard, TC

11-3580-14T 14.5 cm / 5¾“ 11-3585-14T 11-3590-14T 14.5 cm / 5¾“ 11-3595-14T

11-3580-16T 16 cm / 6¼“ 11-3585-16T 11-3590-16T 16 cm / 6¼“ 11-3595-16T
11-3580-18T 18 cm / 7” 11-3585-18T 11-3590-18T 18 cm / 7” 11-3595-18T
Straight Curved Straight Curved

Standard, TC Mayo, TC

11-3600-14T 14.5 cm / 5¾“ 11-3605-14T 11-3610-14T 14.5 cm / 5¾“ 11-3615-14T

11-3600-16T 16 cm / 6¼“ 11-3605-16T 11-3610-17T 17 cm / 6¾“ 11-3615-17T
11-3600-18T 18 cm / 7” 11-3605-18T 11-3610-23T 23 cm / 9” 11-3615-23T
Straight Curved Straight Curved

30
 Scissors. with Tungsten Carbide Inserts

Mayo-Stille, TC Lexer, TC

11-3620-15T 15 cm / 6“ 11-3625-15T 11-3630-16T 16 cm / 6½“ 11-3635-16T

11-3620-17T 17 cm / 6¾” 11-3625-17T 11-3630-21T 21 cm / 8¼“ 11-3635-21T
Straight Curved Straight Curved

Mayo-Lexer, TC Metzenbaum, TC

11-3640-16T 16 cm / 6¼“ 11-3641-16T 11-3645-10T 10 cm / 4“ 11-3650-10T

Straight Curved 11-3645-12T 12 cm / 4¾“ 11-3650-12T
Straight Curved

31
 Scissors. with Tungsten Carbide Inserts

Metzenbaum , TC

11-3655-14T 14.5 cm / 5¾“ 11-3660-14T

11-3655-18T 18 cm / 7“ 11-3660-18T
11-3655-20T 20 cm / 8“ 11-3660-20T
11-3655-23T 23 cm / 9“ 11-3660-23T
11-3655-25T 25 cm / 10“ 11-3660-25T
11-3655-28T 28 cm / 11“ 11-3660-28T
11-3655-30T 30 cm / 12“ 11-3660-30T
Straight Curved

Metzenbaum- Fino , TC
Delicate
Standard

11-1055-14T 14.5 cm / 5¾“ 11-1056-14T

11-1055-18T 18 cm / 7“ 11-1056-18T
11-1055-20T 20 cm / 8” 11-1056-20T
11-1055-23T 23 cm / 9” 11-1056-23T
11-1055-25T 25 cm / 10” 11-1056-25T
11-1055-28T 28 cm / 11” 11-1056-28T
11-1055-30T 30 cm / 12” 11-1056-30T
Straight Curved

32
 Scissors. with Tungsten Carbide Inserts

Metzenbaum-Lahey, TC Iris, TC

11-3675-14T 14.5 cm / 5¾” 11-1085-11T 11.5 cm / 4½” 11-1086-11T

Curved Straight Curved

Iris, TC Goldman- Fox, TC Ragnell (Kilner), TC

11-1090-11T 11.5 cm / 4½” 11-1081-13T 13 cm / 5” 11-1082-13T 11-1095-12T 12 cm / 4¾”

angled to side Straight Curved

11-1090-13T 13 cm / 5”
angled to side

33
 Needle Holders

Derf Derf Collier Halsey

Delicate

20-0427-12 12 cm / 4¾” 20-0429-12 12.5 cm / 5” 20-0433-12 12.5 cm / 5” 20-0437-13 12.5 cm / 5”

20-0437-11 11 cm / 4¼”
Smooth jaws

Webster Neivert Kilner Hegar-Baumgartner

Delicate

Smooth jaws

Serrated jaws

20-0435-13 13 cm / 5” 20-3001-13 20-0439-13 13 cm / 5” 20-0732-13 13,5 cm / 5¼” 20-0441-14 14 cm / 5½”

Smooth Serrated

34
 Needle Holders

Crile-Murray Crile-Wood Mayo-Hegar

Delicate

20-0497-16 16 cm / 6¼”

20-0449-15 15 cm / 6” 20-0451-15 15 cm / 6” 20-0497-18 18 cm / 7”

20-0451-18 18 cm / 7”
20-0451-20 20 cm / 8”

20-0497-20 20 cm / 8”

Mayo-Hegar Adson Metzenbaum

20-0491-16 16 cm / 6¼”

20-0491-14 14 cm / 5½”

20-0491-20 20 cm / 8”

20-0461-18 18 cm / 7” 20-0465-18 18 cm / 7”
20-0491-18 18 cm / 7”

20-0491-26 26 cm / 10¼”
20-0491-24 24 cm / 9½”

35
 Needle Holders

Mathieu Mathieu

20-0617-14 14 cm / 5½” 20-2035-14 20-0627-14 14 cm / 5½”

20-0617-16 16 cm / 6¼” 20-2035-16 Slender jaws
20-0617-17 17 cm / 6¾” 20-2035-17
20-0617-20 20 cm / 8” 20-2035-20
20-0617-24 24 cm / 9½” 20-2035-24

Olsen-Hegar Gillies

20-0565-12 12 cm / 4¾”, Mini 20-0570-16 16 cm / 6¼”

20-0565-14 14 cm / 5½” Serrated jaws
20-0565-16 16 cm / 6¼”
20-0565-18 18 cm / 7”

36
 Needle Holders

McPherson Castroviejo
Without lock

20-0413-14 13.5 cm / 5½”

20-0414-14 13.5 cm / 5½”

13-2044-10 10 cm / 4”

20-2045-14 13.5 cm / 5½”

20-2046-14 13.5 cm / 5½”

Castroviejo Castroviejo
With lock Extra delicate,
with lock

20-2050-13 13 cm / 5¼” 20-2055-13 20-0407-14 13.5 cm / 5½” 20-0408-14

20-2050-16 16 cm / 6¼” 20-2055-16
20-2050-18 18 cm / 7” 20-2055-18
20-2050-20 20 cm / 8” 20-2055-20
20-2050-23 23 cm / 9” 20-2055-23

20-2051-13 13 cm / 5¼” 20-2056-13

20-2051-16 16 cm / 6¼” 20-2056-16
20-2051-18 18 cm / 7” 20-2056-18
20-2051-20 20 cm / 8” 20-2056-20
20-2051-23 23 cm / 9” 20-2056-23

37
 Needle Holders. with Tungsten Carbide Inserts

Derf, TC Webster, TC

0.4 20-0738-12T 12 cm / 4¾” 20-2070-12T

20-0733-12T 12 cm / 4¾” Smooth Serrated
Mini profile

Kilner, TC Webster, TC
Delicate

0.5 20-2073-13T 12 cm / 4¾” 20-2075-13T

20-0732-13T 13,5 cm / 5¼” Smooth Serrated
Normal profile

Halsey, TC Hegar-Baumgartner, TC Crile-Wood, TC

0,5 0,4
20-0735-13T 13 cm / 5” 20-0705-13T
Normal profile Mini profile

0,4 0,5 0,4

20-0737-13T 13 cm / 5” 20-0738-13T 20-0735-14T 14 cm / 5½” 20-0705-15T
Smooth Serrated Normal profile Mini profile
Mini profile

With automatic release ratchet

38
 Needle Holders. with Tungsten Carbide Inserts

Crile-Wood, TC Mayo-Hegar, TC

0,5 0,5
20-0743-14T 14 cm / 5¼” 20-0743-24T 24 cm / 9½”
20-0743-16T 16 cm / 6¼” 20-0743-26T 26 cm / 10¼”
20-0743-18T 18 cm / 7” 20-0743-30T 30 cm / 12”
20-0743-20T 20 cm / 8”

0,4
20-0739-15T 15 cm / 6”
20-0739-18T 18 cm / 7”
20-0739-20T 20 cm / 8”
20-0739-23T 23 cm / 9”
20-0739-25T 25 cm / 10” 0,5 0,5
20-0739-30T 30 cm / 12” 20-0743-35T 35 cm / 14” 20-0743-40T 40 cm / 16”
Mini profile 20-0743-45T 45 cm / 18” Normal profile

Olsen-Hegar, TC De Bakey, TC

0,2
20-3155-12T 12 cm / 4¾”
Micro profile

0,4
20-0747-18T 18 cm / 7”
20-0747-20T 20 cm / 8”
0,4 20-0747-23T 23 cm / 9”
20-0773-14T 14 cm / 5½”
20-0773-16T 16 cm / 6¼”
20-0773-17T 17 cm / 6½”
20-0773-19T 19 cm / 7½”
Mini profile

39
 Needle Holders. with Tungsten Carbide Inserts

McPherson, TC Castroviejo, TC
Without lock

20-3170-10T 10 cm / 4” 20-3175-13T 13.5 cm / 5½” 20-3176-13T

20-3177-13T 13.5 cm / 5½” 20-3178-13T

Castroviejo, TC Castroviejo, TC
With lock Extra delicate,
with lock

20-0721-13T 13 cm / 5¼” 20-0722-13T 20-3180-13T 13.5 cm / 5½” 20-3181-13T

20-0721-14T 14 cm / 5½” 20-0722-14T
20-0721-16T 16 cm / 6¼” 20-0722-16T
20-0721-18T 18 cm / 7” 20-0722-18T
20-0721-20T 20 cm / 8” 20-0722-20T
20-0721-21T 21 cm / 8½” 20-0722-21T
20-0721-23T 23 cm / 9” 20-0722-23T
Smooth, straight Smooth, curved

20-2100-13T 13 cm / 5¼” 20-2105-13T

20-2100-14T 14 cm / 5½” 20-2105-14T
20-2100-16T 16 cm / 6¼” 20-2105-16T
20-2100-18T 18 cm / 7” 20-2105-18T
20-2100-20T 20 cm / 8” 20-2105-20T
20-2100-21T 21 cm / 8½” 20-2105-21T
20-2100-23T 23 cm / 9” 20-2105-23T
Micro profile Micro profile

40
 Retractors

Farabeuf Farabeuf Collin Crile

Set of 2 Set of 2 Set of 2

11 x 4 mm

Fig. 2 30 x 10 mm Fig. 2 27 x 16 mm Fig. 2 21 x 14 mm

Fig. 1 26 x 10 mm Fig. 1 23 x 16 mm Fig. 1 17 x 14 mm

Fig. 2 30 x 13 mm Fig. 2 26 x 16 mm Fig. 2 28 x 16 mm

Fig. 1 34 x 13 mm Fig. 1 30 x 16 mm Fig. 1 32 x 16 mm

19 x 6 mm

15-0764-00 12 cm / 4¾” 15-0766-00 15 cm / 6” 15-3001-15 15 cm / 6” 15-3005-11 11 cm / 4¼”

Mini-Roux Baby-Roux Roux Parker

Set of 2

Fig. 2 22 x 15 mm
Fig. 1 19 x 15 mm

Fig. 2 19 x 15 mm
Fig. 1 22 x 15 mm

15-0756-00 Set
15-0756-01 14 cm / 5½“
15-0768-06 14 cm / 5½” 15-0770-13 13 cm / 5¼” 15-0756-02 15 cm / 6“ 15-0774-01
15-0756-03 17 cm / 6¾“
15-0756-04 18 cm / 7“

41
 Retractors

Parker Parker-Motts
Set of 2 Set of 2

Fig. 2 29 x 25 mm Fig. 2 25 x 24 mm
Fig. 1 26 x 25 mm Fig. 1 21 x 24 mm

Fig. 2 24 x 25 mm Fig. 2 68 x 24 mm
Fig. 1 27 x 25 mm Fig. 1 72 x 24 mm

15-0774-02 18 cm / 7” 15-3010-16 16 cm / 6¼”

Mathieu Parker-Langenbeck
Set of 2

Fig. 2 47 x 13 mm Fig. 2 25 x 24 mm
Fig. 1 41 x 13 mm Fig. 1 21 x 24 mm

Fig. 2 37 x 25 mm Fig. 2 40 x 15 mm
Fig. 1 42 x 25 mm Fig. 1 45 x 15 mm

15-3020-20 20 cm / 8” 15-3015-21 21 cm / 8¼”

42
 Retractors

Skin Hook Skin Hook Skin Hook

15-0201-01 16 cm / 6¼” 15-0201-02 15-0202-01 16 cm / 6¼” 15-0202-02 15-3110-16 16 cm / 6¼” 15-3111-16

Sharp Sharp Blunt Blunt Sharp Sharp

15-0201-03 16 cm / 6¼” 15-0201-04 15-0202-03 16 cm / 6¼” 15-0202-04 15-3112-16 16 cm / 6¼” 15-3113-16

Sharp Sharp Blunt Blunt Sharp Sharp

Skin Hook Knapp

Flexible

15-3120-16 16 cm / 6¼” 15-3125-16

Sharp Blunt

15-3115-16 16 cm / 6¼” 15-3116-16

Blunt Blunt

15-3121-16 16 cm / 6¼” 15-3126-16

Sharp Blunt

15-3117-16 16 cm / 6¼” 15-3118-16 15-3122-16 16 cm / 6¼” 15-3127-16

Blunt Blunt Sharp Blunt

43
 Retractors

Joseph

15-3130-16 16 cm / 6¼“ 15-3131-16 16 cm / 6¼“ 15-3132-16 16 cm / 6¼“ 15-3133-16

Fig. 1 Fig. 2 Fig. 3 Fig. 4
Sharp Sharp Sharp Sharp

Graefe O‘Connor Guthrie

15-3135-16 16 cm / 6¼“ 15-3136-16 15-3140-16 16 cm / 6¼“ 15-3145-16 16 cm / 6¼“ 15-3146-16

Sharp Blunt Sharp 1.5 mm 2 mm

44
 Retractors

Desmarres Langenbeck-Green Mini-Langenbeck

15-3150-16 16 cm / 6¼” 15-3160-16 16 cm / 6¼” 15-3165-16 16 cm / 6¼” 15-3170-16 16 cm / 6¼”

8 mm 12 mm 16 x 6 mm 10 x 6 mm

15-3151-16 16 cm / 6¼” 15-3161-16 16 cm / 6¼” 15-3171-16 16 cm / 6¼”

10 mm 14 mm 17 x 5 mm

15-3152-16 16 cm / 6¼” 15-3162-16 16 cm / 6¼” 15-3172-16 16 cm / 6¼”

12 mm 16 mm 20 x 6 mm

15-3153-16 16 cm / 6¼” 15-3163-16 16 cm / 6¼” 15-3173-16 16 cm / 6¼”

14 mm 18 mm 22 x 8 mm

15-3154-16 16 cm / 6¼” 15-3166-16 16 cm / 6¼”

16 mm 24 x 6 mm

15-3155-16 16 cm / 6¼”
18 mm

Cushing Cushing

15-3175-20 20 cm / 8” 15-3180-20 15-3185-24 24 cm / 9½” 15-3190-24

8 mm 10 mm 8 mm 10 mm

15-3176-20 20 cm / 8” 15-3181-20 15-3186-24 24 cm / 9½” 15-3191-24

12 mm 14 mm 12 mm 14 mm

15-3177-20 20 cm / 8” 15-3182-20 15-3187-24 24 cm / 9½” 15-3192-24

16 mm 18 mm 16 mm 18 mm

45
 Retractors

Ragnell-Davis Senn-Green Senn-Miller

8 x 4 mm 15-0262-01 15 cm / 6”
10 x 6 mm

15 x 5.5 mm

15-0265-14 14 cm / 5½“ 15-0262-02 15 cm / 6” 15-0267-16 16 cm / 6¼” 15-0268-16

20 x 6 mm 7 x 8.5 mm 7 x 8.5 mm
Sharp Blunt

Meyerding

15-3195-00 18 cm / 7“ 15-3196-00 18 cm / 7“ 15-3197-00

18 x 7 mm 16 x 5 mm 7 x 4 mm
Fig. 1 Fig. 2 Fig. 3
Blunt Toothed Toothed

15-3198-00 18 cm / 7“ 15-3199-00 18 cm / 7“ 15-3200-00

5 x 10 mm 11 x 4 mm 6 x 4 mm
Fig. 4 Fig. 5 Fig. 6
Sharp Blunt Saddle shaped

46
 Retractors

Finsen

15-3450-07 7 cm / 2¾” 15-3455-07 15-3460-08 8 cm / 3¼”

Sharp Blunt

Buckley Alm

15-3465-06 6 cm / 2½” 15-3470-07 7 cm 2¾ mm 15-3471-07

15-3470-10 10 cm 4 mm 15-3471-10
Sharp Blunt

Jansen Alm

15-3480-10 10 cm 4 mm 15-3481-10 15-3475-10 10 cm 4 mm 15-3476-00

Sharp Blunt Sharp Blunt

47
 Retractors

Weitlaner Weitlaner

Opening 35 mm

15-3490-10 10.5 cm / 4¼” 15-3491-10 15-3495-14 14 cm / 5½” 15-3494-14

Sharp Blunt 15-3495-16 16.5 cm / 6½” 15-3494-16
2:3 Teeth 2:3 Teeth 15-3495-18 18 cm / 7” 15-3494-18
15-3495-20 20 cm / 8” 15-3494-20
15-3495-24 24.5 cm / 9½” 15-3494-24
Sharp Blunt
3:4 Teeth 3:4 Teeth

West Weitlaner-Wullstein
Opening 60 mm Opening 50 mm

15-3500-13 13 cm / 5¼” 15-3505-14 14 cm / 5½” 15-3506-14

3:3 Teeth Sharp Blunt
3:3 Teeth 3:3 Teeth

15x18mm

48
 Retractors

Weitlaner Mollison

15-3510-14 14 cm / 5½” 15-3515-15 15 cm / 6”

4:4 Teeth
Sharp

Milligan Plester Plester

15-3525-13 13 cm / 5” 15-3530-11 11 cm / 4¼” 15-3535-11 11 cm / 4¼”

Blunt Blunt Blunt
3:3 Teeth 2 Teeth 2 Teeth

49
 Retractors

Perkins Norfolk-Norwich

15-3545-13 13 cm / 5”
Sharp right 15-3565-22 22 cm / 8¾”
Blunt
3 Teeth Perkins 5:4 Teeth

15-3550-13 13 cm / 5”
Sharp left
3 Teeth

Gelpi Gelpi Gelpi

15-3660-09 9 cm / 3½”
15-3665-09 9 cm / 3½” 15-3670-18 18 cm / 7”
15-3660-11 11.5 cm / 4½”
15-3665-11 11.5 cm / 4½”
15-3660-14 14 cm / 5½”
15-3665-14 14 cm / 5½”
15-3660-16 16 cm / 6¼”
15-3665-16 16 cm / 6¼”
15-3660-18 18 cm / 7”
15-3665-18 18 cm / 7”
15-3660-20 20 cm / 8”

50
 Retractors

Balfour-Baby

90 mm

24 x 20 mm

27 mm

15-3805-00
Single bar

15-3806-00
Double bar Balfour
180 mm

70 mm x 35 mm 45 mm x 80 mm
Lateral blade 1 central blade ref.
15-3830-00

Balfour

15-3815-00

15-3830-00 45 x 80 mm
15-3831-00 70 x 85 mm

51
 Orthopedic. Mallets

Collin Williger

23-0301-01 24 cm / 9½”
300 gm /10½ oz
ø 26 mm

23-0317-01 16.5 cm / 6½” 23-0309-20 20 cm / 8” 23-0301-02 24 cm / 9½”

140 gm /5 oz 220 gm /7¾ oz 340 gm /12 oz
ø 20 mm ø 30 mm ø 28 mm

23-0301-03 24 cm / 9½”
400 gm /14 oz
ø 30 mm

Lucae Mead

23-0315-01 19 cm / 7½” 23-3070-17 17 cm / 6¾”

230 gm /8 oz 320 gm
ø 19 mm ø 26 mm
Solid

23-0315-02 19 cm / 7½” 23-3071-17 17 cm / 6¾”

260 gm /9 oz Ferrozell faces only, pair
ø 25 mm

52
 Orthopedic. Bone Files, Bone Levers

Putti Putti Fomon Murphy-Lane

23-3230-30 30 cm / 12” 23-3235-27 27 cm / 10½” 23-3240-21 21 cm / 8¼” 23-3245-30 30 cm / 12”

Double ended, Bone skid
fine and coarse
teeth 4-side,
convex and  
flat blades  
8 mm width

53
 Orthopedic. Nasal Rasp, Bone Files

Trochlear Maltz Improved Aufricht

23-3250-17 17 cm / 6½” 23-3255-21 21 cm / 8¼” 23-3260-21 21 cm / 8¼” 23-3261-21

Double ended, Single ended Single ended
forward and forward cutting backward cutting
backward 9 mm width 9 mm width
cutting,  
8 mm width

Maltz Excision Arthroplasty Joseph

23-3265-18 18 cm / 7” 23-3266-18 23-3270-17 17 cm / 6½” 23-3275-16 16 cm / 6¼”

34 x 7 mm 34 x 7 mm Single ended,
8 mm at wide
Backward cutting Forward cutting
point, fine
Single ended Single ended cross serrations
10 mm widh 10 mm widh

54
 Orthopedic. Bone Files

Lewis Rasp Cottle Rasp Miller-Colburn

7 mm

5 mm

23-3280-19 19 cm / 7½” 23-3281-19 23-3285-20 20.5 cm / 8” 23-0591-01 18 cm / 7”

Fine, single Coarse, Single ended Double ended,
ended single ended backward plain serrations
8 mm width 8 mm width cutting
plain serrations 9 mm width
plain serrations

Miller-Colburn Miller-Colburn Miller-Colburn

Cross serrations 7 mm Fine serrations

Plain serrations 5 mm Coarse serrations

23-3290-18 18 cm / 7” 23-3295-18 18 cm / 7” 23-3301-21 21.5 cm / 8½”

Double ended, Double ended, Double ended,
5 mm width cross serrations 13 mm width
Cross serrations,
for rapid
shaping of bone

55
 Orthopedic. Bone Files

Miller-Colburn Miller-Colburn Miller-Colburn

6 mm 6 mm

5 mm 5 mm

23-0591-02 18.5 cm / 7¼” 23-0591-04 18 cm / 7” 23-0591-03 18 cm / 7”

Double ended, Double ended, Double ended,
plain serrations plain serrations 5 mm width,
plain serrations

Polokoff Rasp Miller-Colburn

4 mm

4 mm 3 mm

23-3305-18 18 cm / 7”
Double ended,
plain serrations
3 mm

23-3310-18 18 cm / 7”
Double ended

23-3305-21 21.5 cm / 8½”

6 mm width
Double ended,
plain serrations

56
 Orthopedic. Wire Saws

Gigli

23-3355-00
Handle

Olivecrona Gigli

23-3345-30 30 cm / 12” 23-3350-30 30 cm / 12”

23-3345-40 40 cm / 16” 23-3350-40 40 cm / 16”
23-3345-50 50 cm / 20” 23-3350-50 50 cm / 20”
23-3345-70 70 cm / 28”
23-3351-50 50 cm / 20”
Fine, 6 wires twisted

57
 Orthopedic. Bone Curettes

Volkmann Spratt

23-0405-40 17 cm / 6¾” 23-0405-30 23-3630-40 17 cm / 6¾” 23-3630-30

Fig. 0000 Fig. 000 Fig. 0000 Fig. 000

23-0405-20 17 cm / 6¾” 23-0405-10 23-3630-20 17 cm / 6¾” 23-3630-10

Fig. 00 Fig. 0 Fig. 00 Fig. 0

23-0405-01 17 cm / 6¾” 23-0405-02 23-3630-01 17 cm / 6¾” 23-3630-02

Fig. 1 Fig. 2 Fig. 1 Fig. 2

23-0405-03 17 cm / 6¾” 23-0405-04 23-3630-03 17 cm / 6¾” 23-3630-04

Fig. 3 Fig. 4 Fig. 3 Fig. 4

23-0405-05 17 cm / 6¾” 23-0405-06 23-3630-05 17 cm / 6¾” 23-3630-06

Fig. 5 Fig. 6 Fig. 5 Fig. 6

Bruns

23-0409-40 17 cm / 6¾” 23-0409-30 17 cm / 6¾” 23-0409-20 17 cm / 6¾” 23-0409-10 17 cm / 6¾” 23-0409-01

Fig. 0000 Fig. 000 Fig. 00 Fig. 0 Fig. 1

23-0409-02 17 cm / 6¾” 23-0409-03 17 cm / 6¾” 23-0409-04 17 cm / 6¾” 23-0409-05 17 cm / 6¾” 23-0405-06

Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6

58
 Orthopedic. Bone Osteotomes Chisels And Gouges

Leibinger Leibinger Leibinger

Osteotomes Chisels Gouges

23-3710-13 13.5 cm / 5¼” 23-3711-13 23-3715-13 13.5 cm / 5¼” 23-3716-13 23-3720-13 13.5 cm / 5¼” 23-3721-13
8 mm 10 mm 8 mm 10 mm 8 mm 10 mm

23-3712-13 13.5 cm / 5¼” 23-3713-13 23-3717-13 13.5 cm / 5¼” 23-3718-13 23-3722-13 13.5 cm / 5¼” 23-3723-13
12 mm 14 mm 12 mm 14 mm 12 mm 14 mm

23-3714-13 13.5 cm / 5¼” 23-3719-13 13.5 cm / 5¼” 23-3724-13 13.5 cm / 5¼”

16 mm 16 mm 16 mm

Leibinger
Chisels

23-0206-02 13.5 cm / 5¼” 23-0206-03 13.5 cm / 5¼” 23-0206-04 13.5 cm / 5¼” 23-0206-05 13.5 cm / 5¼” 23-0206-06
2 mm 3 mm 4 mm 5 mm 6 mm

23-0207-02 17 cm / 6¾” 23-0207-03 17 cm / 6¾” 23-0207-04 17 cm / 6¾” 23-0207-05 17 cm / 6¾” 23-0207-06

2 mm 3 mm 4 mm 5 mm 6 mm

Leibinger
Gouges

23-0210-02 13.5 cm / 5¼” 23-0210-03 13.5 cm / 5¼” 23-0210-04 13.5 cm / 5¼” 23-0210-05 13.5 cm / 5¼” 23-0210-06
2 mm 3 mm 4 mm 5 mm 6 mm

23-0211-02 17 cm / 6¾” 23-0211-03 17 cm / 6¾” 23-0211-04 17 cm / 6¾” 23-0211-05 17 cm / 6¾” 23-0211-06

2 mm 3 mm 4 mm 5 mm 6 mm

59
 Orthopedic. Osteotomes, Chisels

Mini-Lambotte Mini-Lambotte
Osteotome Osteotome

23-3805-12 12.5 cm / 5” 23-3806-12 23-3815-17 17 cm / 6¾” 23-3816-17

3 mm 4 mm 3 mm 4 mm

23-3807-12 12.5 cm / 5” 23-3808-12 23-3817-17 17 cm / 6¾” 23-3818-17

6 mm 8 mm 6 mm 8 mm

23-3809-12 12.5 cm / 5” 23-3810-12 23-3819-17 17 cm / 6¾” 23-3820-17

10 mm 12 mm 10 mm 12 mm

23-3811-12 12.5 cm / 5” 23-3821-17 17 cm / 6¾”

15 mm 15 mm

Mini-Lambotte Mini-Lambotte
Osteotome Osteotome

23-3825-24 24 cm / 9½” 23-3826-12 23-3835-24 24 cm / 9½” 23-3836-12

15 mm 20 mm 15 mm 20 mm
Straight Straight Curved Curved

23-3827-24 24 cm / 9½” 23-3828-24 23-3837-24 24 cm / 9½” 23-3838-24

25 mm 30 mm 25 mm 30 mm
Straight Straight Curved Curved

23-3829-24 24 cm / 9½” 23-3830-24 23-3839-24 24 cm / 9½” 23-3840-24

38 mm 44 mm 38 mm 44 mm
Straight Straight Curved Curved

23-3831-24 24 cm / 9½” 23-3841-24 24 cm / 9½”

50 mm 50 mm
Straight Curved

60
 Orthopedic. Elevators

Williger Langenbeck Lambotte

8 mm

23-4415-16 16 cm / 6¼” 23-4420-20 20 cm / 8” 23-4445-17 17 cm / 6¾”

4 mm 8 mm

23-4416-16 16 cm / 6¼” 23-4421-20 20 cm / 8”

5 mm 10 mm

23-4417-16 16 cm / 6¼”
6 mm

23-4418-16 16 cm / 6¼”
7 mm

Langenbeck Adson

23-4450-17 17 cm / 6¾” 23-4451-17 23-4455-17 17 cm / 6¾” 23-4456-17

5 mm 7 mm

23-4450-20 20 cm / 8” 23-4451-20 23-4457-17 17 cm / 6¾” 23-4458-17

8 mm 10 mm

61
 Orthopedic. Periosteal Elevators

Periosteal Elevator Periosteal Elevator Periosteal Elevator

Ferrozell handle Ferrozell handle Ferrozell handle

6 mm 6 mm 3 mm

23-4550-18 18 cm / 7” 23-4555-18 18 cm / 7” 23-4560-18 18 cm / 7”

Periosteal Elevator Periosteal Elevator Periosteal Elevator

Ferrozell handle Ferrozell handle Ferrozell handle

14 mm 14 mm 19 mm

23-4565-20 20 cm / 8” 23-4570-20 20 cm / 8” 23-4575-20 20 cm / 8”

62
 Orthopedic. Bone Levers

Bone Lever Bone Lever Bone Lever Bone Lever

23-4580-00 16 cm 23-4585-14 14 cm / 5½” 23-4590-15 15 cm / 6” 23-4595-15 15 cm / 6”

5 mm 7 mm

Buck-Gramcko Mini-Hohmann Freer

7.5 cm

23-4601-15 15 cm / 6” 23-4610-16 16 cm / 6¼” 23-4611-16

6 mm 8 mm

23-4605-00 15 cm 23-4615-18 18.5 cm / 7¼”

Sharp/Blunt

63
 Orthopedic. Bone Levers

Hohmann Hohmann Hohmann Hohmann

23-4620-00 22 cm / 8¾” 23-4625-00 23.5 cm / 9¼” 23-4630-00 23.5 cm / 9¼” 23-4635-00 23.5 cm / 9¼”
8 mm 18 mm 43 mm 70 mm

64
 Orthopedic. Bone Holding & Reduction Forceps

Reposition Forceps Bone Reduction Forceps

23-4755-09 9.5 cm / 3¾” 23-4756-09 23-4760-13 13.5 cm / 5½”

Stepped tips Stepped tips

Reposition Forceps Brand Bone Reduction Forceps

23-4745-15 15 cm / 6”

23-4745-19 19 cm / 7½” 23-4775-14 14 cm / 5½”

23-4775-16 16 cm / 6½”
Curved

23-4765-13 13.5 cm / 5¼”

Especially for
maxillary reposition
23-4745-24 24 cm / 9½”

65
 Orthopedic. Bone Holding & Reduction Forceps

Stagbeetle Bone Reduction Forceps Bone Holding Forceps

23-4780-12 12 cm / 4¾” 23-4785-13 13 cm / 5¼” 23-4790-00 16 cm / 6½”

Bone Reduction Forceps Curved, with 1.6 mm
Curved, guide k-wire
pointed tips pointed tips

Bone Reduction Forceps Bone Reduction Forceps

23-4795-17 17 cm / 6¾” 23-4800-15 15 cm / 6”

Curved, 23-4800-17 17.5 cm / 7”
with 1.1 mm 23-4800-20 20 cm / 8”
k-wire guide

66
 Orthopedic. Bone Holding & Reduction Forceps

Bone Holding Forceps Reill

23-4805-12 12.5 cm / 5”
Serrated
10 Teeth

23-4810-17 17.5 cm / 7”
Reposition Forceps
curved,
pointed tips

23-4805-14 14 cm / 5½”
Serrated
14 Teeth

Steinhauser Steinhauser Bone Fragment Forceps

23-4815-13 13 cm / 5” 23-4820-13 13 cm / 5” 23-4825-16 16 cm / 6¼”

67
 Orthopedic. Bone Holding & Reduction Forceps

Bone Reduction Forceps Bone Grasping Forceps Meyer

23-4830-15 15 cm / 6” 23-4835-21 21 cm / 8¼” 23-4840-17 17 cm / 6¾”

23-4830-18 18 cm / 7” 1 x 1 sharp points. Reposition Forceps
23-4830-20 20 cm / 8” for small bones with drill
23-4830-30 30 cm / 12” guide for Kirschner
wires up to
diameter 1.0 mm

Meyer Bone Holding Forceps Locke

23-4845-20 20.5 cm / 8” 23-4850-14 14 cm / 5½” 23-4855-15 15 cm / 6”

Reposition Forceps Phalangeal forceps
with drill guide serrated jaws
for kirschner 1:1 Teeth
wires up to
diameter 2.0 mm

68
 Orthopedic. Bone Holding & Reduction Forceps

Bone Reduction Forceps Bone Grasping Forceps Lewin

23-4860-14 14 cm / 5¼” 23-4870-14 14 cm / 5” 23-4875-17 17.5 cm / 7”

for small bones 23-4870-19 19 cm / 7½”
curved,
ratchet length 1¼“

Dingmann Dingmann

23-4880-18 18.5 cm / 7¼” 23-4885-18 18.5 cm / 7¼”

Delicate Standard

69
 Orthopedic. Bone Holding Forceps

Verbrugge Verbrugge

23-4980-16 16 cm / 6¼” 23-4981-16 23-4985-18 18 cm / 7”

Both jaws 1 jaw serrated 23-4985-24 24 cm / 9½”
serrated 1 jaw plain 23-4985-26 26 cm / 10¼”
23-4985-28 28 cm / 11”
Serrated jaws

Kern Kern

23-4945-12 12 cm / 4¾” 23-4950-12 12 cm / 4¾”

23-4945-15 15 cm / 6” 23-4950-15 15 cm / 6”
23-4945-17 17 cm / 6¾” 23-4950-17 17 cm / 6¾”
23-4945-21 21 cm / 8¼” 23-4950-21 21 cm / 8¼”
Without ratchet 23-4950-23 23 cm / 9”
With ratchet

70
 Orthopedic. Bone Holding Forceps

Bone Holding Forceps

23-5005-16 16 cm / 6¼”
23-5005-18 18 cm / 7”
23-5005-20 20 cm / 8”
23-5005-22 22 cm / 9”
23-5005-24 24 cm / 9½”
23-5005-26 26 cm / 10¼”
23-5005-28 28 cm / 11”

Patella Forceps

23-5010-18 18 cm / 7”
2 x 2 sharp teeth
with speed lock

71
 Orthopedic. Bone Holding Forceps

6.5mm
2.5mm

23-5025-15 15 cm / 6“ 23-5026-15 15 cm / 6“ 23-5027-15 25-5025-19 19 cm / 7½“ 25-5026-19 19 cm / 7½“ 25-5027-19

Standard jaws Reverse jaws Moveable jaws Standard jaws Reverse jaws Moveable jaws

10 mm
9.5mm

23-5025-24 24 cm / 9½“ 23-5026-24 24 cm / 9½“ 23-5027-24 23-5025-26 26 cm / 10¼“ 23-5026-26 26 cm / 10¼“ 23-5027-26
Standard jaws Reverse jaws Moveable jaws Standard jaws Reverse jaws Moveable jaws

8.5mm 11mm

23-5025-22 22 cm / 8½“ 23-5026-22 22 cm / 8½“ 23-5027-22 23-5025-28 28 cm / 11“ 23-5026-28 28 cm / 11“ 23-5027-28
Standard jaws Reverse jaws Moveable jaws Standard jaws Reverse jaws Moveable jaws

Self-Centering Forceps Self-Centering Forceps Verbrugge

With ratchet

Standard jaws With thread fixation 28 cm / 11”

Reverse jaws With moveable jaws

72
 Orthopedic. Bone Holding Clamps, Traction Bar

23-5075-08 8.5 cm / 3¼” 23-5075-12 12 cm / 4¾” 23-5075-18 18 cm / 7”

Special mini

23-5075-20 20 cm / 8” 23-5075-22 22 cm / 8¾”

Gerster - Lowmann Gerster

1 x 2 jaws Traction Bar

23-5080-00

73
 Orthopedic. Bone Holding Clamps

Lowmann
1 x 1 jaws

23-5085-12 12 cm / 4¾”
23-5085-18 18 cm / 7¼”
23-5085-20 20 cm / 8”

Bone clamp

Lowmann Lowman Hoglund

2 x 2 jaws

23-5090-18 18.5 cm / 7¼” 23-5095-12 12 cm / 4¾”

23-5090-20 20 cm / 8” 23-5095-18 18 cm / 7¼”
23-5095-20 20 cm / 8”

Bone clamp
Moveable Jaws

74
 Orthopedic. Bone Rongeur Forceps

Mini-Friedmann Friedmann Micro-Friedmann

Delicate

23-0900-12 12.5 cm / 5” 23-0902-14 14 cm / 5½” 23-5140-15 15 cm / 6“ 23-5141-15

Straight Curved
2 x 6 mm bite 2 x 6 mm bite

Micro-Friedmann Stellbrink
Extremely delicate

23-5145-14 14 cm / 5½“ 23-5146-14 23-5150-17 17 cm / 6¾“ 23-5151-17

Straight Angled 30°
1.5 x 5 mm bite 1.5 x 5 mm bite

Universal

23-5147-14 14 cm / 5½“ 23-5155-13 13.5 cm / 5¼“

Angled 90°
1.5 x 5 mm bite

75
 Orthopedic.Bone Rongeur Forceps

Mead Mead Mead

23-5160-16 16.5 cm / 6½” 23-5165-16 16.5 cm / 6½” 23-5170-16 16.5 cm / 6½”

Cleveland Cleveland Hartmann

23-0906-14 14.5 cm / 5½” 23-0908-17 17 cm / 6¾” 23-0920-18 18.5 cm / 7¼”

76
 Orthopedic.Bone Rongeur Forceps

Jansen Jansen Marchac

23-5175-18 18 cm / 7“ 23-5176-18 23-5180-18 18 cm / 7“ 23-5181-18

23-5185-18 18 cm / 7”

23-5177-18 18 cm / 7“

Blumenthal Luer

23-0936-15 15 cm / 6“ 23-0938-15 23-0954-15 15 cm / 6“ 23-0965-15

23-0940-15 15 cm / 6“ 23-0966-15 15 cm / 6“

77
 Orthopedic. Bone Rongeur Forceps

Luer Hakansson Alexander

23-5190-17 17 cm / 6¾“ 23-5191-17 23-5195-17 17 cm / 6¾“ 23-5201-14 14 cm / 5½“

Curved to side

Jansen Beyer Olivecrona

23-5205-19 19 cm / 7½“ 23-2145-18 18 cm / 7“ 23-5210-20 20.5 cm / 8“

78
 Orthopedic. Bone Rongeur Forceps

Guleke Trotter Northfield

23-5215-20 20.5 cm / 8“ 23-5220-20 20.5 cm / 8“ 23-5225-20 20.5 cm / 8¼“

Curved to side

Pennybacker Wilms Rat Tooth Rongeur

23-5230-20 20.5 cm / 8“ 23-5235-21 21 cm / 8¼“ 23-5240-20 20.5 cm / 8“

With teeth
8 x 15 mm bite
Straight

79
 Orthopedic. Bone Rongeur Forceps

Lempert Zaufal-Jansen

23-5245-16 16 cm / 6¼“ 23-5246-16 23-0980-18 18 cm / 7“

23-5245-19 19 cm / 7½“ 23-5246-19
Straight Curved
2.5 mm bite 2.5 mm bite

Böhler

Ruskin
23-5255-15 15 cm / 6“ 23-526015 Delicate
2 mm tip 2 mm tip

23-5256-15 15 cm / 6“ 23-5261-15
3 mm tip 3 mm tip

23-5257-15 15 cm / 6“ 23-5262-15
4 mm tip 4 mm tip 23-2150-15 15 cm / 6“ 23-5295-15
2 mm 2 mm
23-5275-15 15 cm / 6“ 23-5296-15
3 mm 3 mm
23-5276-15 15 cm / 6“ 23-5297-15
4 mm 4 mm
Straight Curved

23-5280-18 17.5 cm / 7“ 23-5300-18

Mayfield Beyer 2 mm 2 mm
23-2155-18 17.5 cm / 7“ 23-0988-18
3 mm 3 mm
23-5281-18 17.5 cm / 7“ 23-5301-18
4 mm 4 mm
23-5282-18 17.5 cm / 7“ 23-5302-18
6 mm 6 mm
23-5283-18 17.5 cm / 7“ 23-5303-18
8 mm 8 mm
23-5265-17 17 cm / 6¾“ 18 cm / 7“ Straight Curved
23-5270-18 23-5271-18
Straight Curved
23-5285-20 20 cm / 8“ 23-5305-20
2 mm 2 mm
23-5286-20 20 cm / 8“ 23-5306-20
3 mm 3 mm
23-5278-20 20 cm / 8“ 23-5307-20
4 mm 4 mm
23-5288-20 20 cm / 8“ 23-5308-20
6 mm 6 mm
23-5289-20 20 cm / 8“ 23-5309-20
8 mm 8 mm
Straight Curved

80
 Orthopedic. Bone Rongeur Forceps

Ruskin Smith-Peterson Marquard

23-5315-23 23 cm / 9“ 23-5320-24 24 cm / 9½“ 23-5321-24 23-5325-20 20 cm / 8“

Straight Curved
3 x 16 mm bite 3 x 16 mm bite
Laminectomy Laminectomy
Rongeur Rongeur

23-5322-24 23 cm / 9“
Full curve
3 x 16 mm bite
Laminectomy
Rongeur

Kleinert-Kutz Kleinert-Kutz
Delicate Delicate

23-5330-15 15 cm / 6“ 23-5331-15 23-5335-15 15 cm / 6“ 23-5340-15 15 cm / 6“

2 x 13 mm bite 2 x 13 mm bite 3 x 8 mm bite 2 x 10 mm bite
Synovectomy Synovectomy Full curve Synovectomy
Rongeur Rongeur Delicate Rongeur
Slight curve Slight curve Curved on side

81
 Orthopedic. Bone Cutting Forceps

Liston

23-5420-14 14 cm / 5½“ 23-5425-14 23-5420-17 17 cm / 6¾“ 23-5425-17

Straight Curved Straight Curved

23-5420-19 19 cm / 7½“ 23-5425-19 23-5420-22 22 cm / 8¾“ 23-5425-22

Straight Curved Straight Curved

Cleveland Cleveland

23-5435-15 15 cm / 6“ 23-1040-15 15 cm / 6“
23-1040-17 17 cm / 6¾“

82
 Orthopedic. Bone Cutting Forceps

Böhler

23-5480-14 14.5 cm / 5¾“ 23-5485-17 17 cm / 6¾“

Mc Indoe Ruskin-Liston Liston

23-1051-18 18.5 cm / 7¼“ 23-1052-18

Straight Curved

23-5490-17 17.5 cm / 7“ 23-5495-24 24 cm / 9½“

83
 Orthopedic. Wire Twisting Forceps with Tungsten Carbide Inserts

Wire Twister, TC Corwin, TC Wire Twister, TC

23-5525-15T 15.5 cm / 6“ 23-5530-16T 16 cm / 6¼“ 23-0601-15T 15 cm / 6“

Wire Twister, TC Berry, TC

23-0621-18T 18 cm / 7“ 23-5535-18T 18.5 cm / 7¼“

23-0621-20T 20 cm / 8“ 23-5535-20T 20 cm / 8“

84
 Orthopedic. Wire Twisting Instruments with Tungsten Carbide Inserts

Wire Twister / Cutter, TC Wire Twister, TC

23-5505-17T 17 cm / 6¾“ 23-5545-15T 15 cm / 6“

Holding forceps Wire tightening
for cerclage wire, pliers
with lateral jaws ligature pliers
to avoid wire
slipping off

Flat Nose Pliers, TC Flat Nose Pliers, TC

23-5565-18T 18 cm / 7“ 23-5566-18T 23-5570-18T 18 cm / 7“ 23-5571-18T

Parallel grip Parallel grip Parallel grip Parallel grip

23-5567-18T 18 cm / 7“
Parallel grip

85
 Orthopedic.Wire Twister, Flat Nose Pliers, Wire Cutting Pliers

23-5575-16 16 cm / 6¼“ 23-5580-15 15 cm / 6“ 23-5585-16 16.5 cm / 6½“

Heavy pattern For bending & cutting

Wire Twister / Shear Cutter

23-5590-00
Wire twister/Shear cutter
cuts wire up to 18g
twisted double

Hakstock

23-5595-17 17 cm / 6¾“ 23-5596-17 23-5601-16 16 cm / 6¼“ 23-5605-14 14 cm / 5½“

With crosswise With longitudinal
groove groove

86
 Orthopedic. Wire Twister & Wire Cutting Pliers

23-5695-20 20 cm / 8“ 23-5655-00
Slip joint plier Wire tightener 23-5710-13 13 cm / 5¼“
10 mm tip 23-5710-17 17 cm / 6½“
Maximum
opening 2”

23-5715-17 17 cm / 6½“ 23-5720-18 18 cm / 7“

23-5715-12 12.5 cm / 5“
With side cutter

87
 Orthopedic. Wire Cutting Pliers

Diamant Wire Cutter, TC

23-5770-16 16 cm / 6¼“ 23-5775-16 16 cm / 6¼“ 23-5780-00 16 cm / 6¼“ 23-5785-16T 16 cm / 6¼“

for soft wires up to ø2.5 mm for soft wires up to ø2.4 mm 23-5785-18T 18 cm / 7“
for hard wires up to ø2.0 mm for hard wires up to ø1.8 mm 23-5785-20T 20 cm / 8“

Wire Cutter, TC Wire Cutter, TC Wire Cutter, TC

For up to
1.6 mm

23-5790-14T 14 cm / 5½“ 23-5795-22T 22 cm / 8¾“ 23-5801-14T 14 cm / 5½“

23-5790-16T 16 cm / 6¼“ for soft wires up to ø2.6 mm 23-5801-16T 16 cm / 6½“
23-5790-18T 18 cm / 7“ for hard wires up to ø2.2 mm 23-5801-18T 18 cm / 7“
23-5801-22T 22 cm / 8¾“
for soft wires up to ø3 mm
for hard wires up to ø2.2 mm

88
 Orthopedic. Wire Cutting Pliers

Wire Cutter, TC
Front and Side

23-5805-15 15 cm / 6“ 23-5810-24 24 cm / 9½“ 23-5815-18T 18 cm / 7“

for soft wires up to ø2.0 mm for soft wires up to ø2 mm
for hard wires up to ø1.2 mm for hard wires up to ø1.5 mm

Front Pin Cutter, TC Wire Cutter, TC

23-5825-22T 22 cm / 8¾“ 23-5820-17T 17 cm / 6¾“

for soft wires up to ø3.5 mm Angled slender
for hard wires up to ø2.5 mm pattern for wire
removal (for soft
wire

89
 Orthopedic. Bone Wire Guides

23-5910-27 27.5 cm / 10¾“ 23-5910-28 28.5 cm / 11¼“ 23-5910-30 30.5 cm / 12“

Fig. 3 Fig. 2 Fig. 1

23-6050-22 22 cm / 8¾“

23-5940-00 23-5945-00 23-5950-00

Cerclage wire passer ø 45 mm ø 70 mm

90
 Orthopedic. Bone Plate Benders

1.5 mm
1.8 mm
2 mm
2.7 mm 3.5 mm
3.5 mm 2.7 mm
3.5 mm
4.5 mm
6 mm

4.5 mm
3.5 mm
4 mm

23-6030-20 20 cm / 8“ 23-6035-14 14 cm / 5½“ 23-6040-13 13 cm / 5¼“

3.5 mm, 4.5 mm Plate benders 1.5 mm
Pair 23-6041-13 13 cm / 5¼“
23-6031-20 20 cm / 8“
2 mm
4.5 mm, 3.5 mm
23-6042-12 12 cm / 4¾“
23-6032-25 25 cm / 8“ 1.8 mm
6 mm, 4 mm

23-6045-00
Large bone plate press

23-6046-00
Small bone plate press

91
 ASC – A Surgical Company

Contents list
Scalpel Handles
Scalpel Handles 04-05

Forceps
Artery Forceps 06
Artery Forceps, Delicate 07-08
Delicate Artery Forceps 09
Artery Forceps 10-11
Tissue, Organ Grasping Forceps & Angiotribes 12
Towel Forceps 13
Cotton Swab Forceps – Sponge Forceps 14

Dressing & Tissue Forceps

Dressing and Tissue Forceps 15-16
Micro Forceps, Splinter Forceps 17
Dissecting Forceps 18

Scissors
Operating Scissors 19-21
Dissecting Scissors 22-23
Dissecting Scissors, Fino-Line 24
Fine Operating Scissors 25
Fine Operating Scissors & Ligature Scissors 26
Operating Gum & Ligature Scissors 27
Micro Scissors 28
Bandage Scissors 29
Scissors with Tungsten Carbide Inserts 30-33

Needle Holders
Needle Holders 34-40

Retractors
Retractors 41-42
Hooklets 43
Micro Hooklets, Skin Hooks 44
Saddle Hooks, Hooklets 45

92
 ASC – A Surgical Company

Contents list
Retractors
Hooklets 46
Wound Spreaders, Self-retaining 47
Retractors 48
Wound Spreaders, Self-retaining 49
Retractors 50
Abdominal Retractors 51

Orthopedic
Mallets 52
Bone Files, Bone Levers 53
Nasal Rasp, Bone Files 54
Bone Files 55-56
Wire Saws 57
Bone Curettes 58
Bone Osteotomes Chisels And Gouges 59
Bone Osteotome Chisels 60
Elevators 61
Periosteal Elevators 62
Bone Levers 63-64
Bone Holding & Reduction Forceps 65-69
Bone Holding Forceps 70-72
Bone Holding Clamps, Traction Bar 73
Bone Holding Clamps 74
Bone Rongeur Forceps 75-81
Bone Cutting Forceps 82-83
Wire Twisting Forceps, Tungsten Carbide 84
Wire Tightening Pliers, Flat Nose Pliers, Tungsten Carbide 85
Wire Twister, Flat Nose Pliers, Wire Cutting Pliers 86
Wire Twister & Wire Cutting Pliers 87
Wire Cutting Pliers 88-89
Bone Wire Guides 90
Bone Plate Benders 91

Important Notice:  
This is our General Catalogue which remains our exclusive property. 
Change of design and pattern reserved. Re-printing, even in parts, is not permitted.  
All business is subject to our General Terms of Sale. As of July 2009

93
Take-Off GewerbePark 2 | 78579 Neuhausen ob Eck | Germany
Tel: +49 (0) 7467 94960-46 | Fax: +49 (0) 7467 94960-49
E-Mail: [email protected] | www.asc-med.com