RCC Assignment 2
RCC Assignment 2
Assignment-II
Solve the following problems. Any missing data can be suitably assumed.
• Adopt the grade of concrete and grade of steel for all the problems as those given
for your respective register number (Refer Table in the next page)
• In the statement for problem one, X stands for the last three digits of your
Institute Roll number. ee. If your Roll.No 191CV234, then X=234.
1) Design the flexural and shear reinforcement of simply supported beam of effective
span 5m, subjected to a factored load of X/N kN/m. Width of the beam may be
assumed as 300mm. (N=2 for CV1 students) (N=4.75 for CV2 students)
3) A two-way slab has an effective size of 4m x 6m. Refer Table in the next page for the
characteristic live load acting on the slab. Load due to floor finish is 1 kN/m2. Design
the slab and sketch the reinforcement details if,
(a) Slab is simply supported on all sides and corners are free to lift.
(b) The slab is an interior panel.
---------------------------------------------------
Table