Scribd
Upload
162 views2 pages

415V Asb Switchboard Auto Transfer Scheme: Incomer-1 Incomer-2 Test Close Test Close

This document summarizes the operation of an automatic transfer switchboard with two incoming feeders. It details the local/auto/remote controls, circuit breaker positions, protection devices, and transfer scheme logic for both incoming feeders and the bus coupler. The transfer scheme monitors the voltage and status of each feeder and automatically transfers the load between feeders based on predetermined conditions to maintain power supply.

Uploaded by

Marudavanan Somasundaram
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
162 views2 pages

415V Asb Switchboard Auto Transfer Scheme: Incomer-1 Incomer-2 Test Close Test Close

This document summarizes the operation of an automatic transfer switchboard with two incoming feeders. It details the local/auto/remote controls, circuit breaker positions, protection devices, and transfer scheme logic for both incoming feeders and the bus coupler. The transfer scheme monitors the voltage and status of each feeder and automatically transfers the load between feeders based on predetermined conditions to maintain power supply.

Uploaded by

Marudavanan Somasundaram
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 2

415V ASB SWITCHBOARD AUTO TRAN

MAKE: NITYA ELECTRICALS LOCATION: SS80 BOARD TAG: ASB-80411


INCOMER-1 INCOMER-2
Test Close Test Close
Local/Auto/Remote Switch Local Local/Auto/Remote Switch
CB Position Test CB Position
Close Command Through TNC Switch Close Command Through
Service Close Interlocks Service Close Interlocks
Local/Auto/Remote Switch Auto Local/Auto/Remote Switch
CB Position Service CB Position
Trip Circuit Healthy Trip Circuit
Master Trip Relay In Reset Master Trip Relay
CB Status of IC-2 or BC Either in 'OFF' CB Status of IC-1 or BC
Line Voltage MCB ON Line Voltage MCB
27A&27B Relay ('OFF' Delay 3.2sec) Not Optd 27A&27B Relay ('OFF' Delay 3.2sec)
Timer 'T' ('ON'delay 5sec) Picks up/Executes Auto Timer 'T' ('ON'delay 5sec)
Command
Trip Command Trip Command
UV (27X) trip delay - 3.2s Both 27A&B Relay Optd UV (27X) trip delay - 3.2s
L/A/R in Local/Auto Manual Trip (TNC) L/A/R in Local/Auto
Protection Trip (Auto Trip) 86 Optd Protection Trip(Auto Trip)
EMPB (Auto Trip) 86 Optd EMPB (Auto Trip)
CB Status of IC-2 & BC Both in 'ON' CB Status of IC-1 & BC
HBOARD AUTO TRANSFER SCHEME
DATE: 01.02.2022
NCOMER-2 BUS COUPLER
Test Close Test Close (NA)
Local Local/Auto/Remote Switch Local
Test CB Position TEST
TNC Switch Close Command Through TNC NOT APPLICABLE
e Close Interlocks Service Close Interlocks - Case-1
Auto Local/Auto/Remote Switch Local
Service CB Position Service
Healthy Close Command TNC Switch
In Reset Master Trip Relay In Reset
Either in 'OFF' CB Status of IC-1 or IC-2 Either in 'OFF'
ON Trip Circuit Healthy
Not Optd Service Close Interlocks - Case-2
Picks up/Executes Auto
Command Local/Auto/Remote Switch Auto
ip Command CB Position Service
Both 27A&B Relay Optd Close Command TNC Switch
Manual Trip (TNC) Master Trip Relay In Reset
86 Optd IC-1 Line Healthy & IC-2 in UV Either of these two
86 Optd IC-2 Line Healthy & IC-1 in UV category in active
Both in 'ON' Trip Circuit Healthy
Trip Command
Protection Trip (Auto Trip) 86 Optd
EMPB (Auto Trip) 86 Optd
IC-1 & IC-2 Line Voltage Healthy Trip To Trip Coil
IC-1&IC-2 CB n 'ON' Trip To Trip Coil

You might also like