Scribd
Upload
76 views4 pages

HXR-NX5 Series Software Update Procedure: Necessary Equipment

This document provides instructions for updating the software on an HXR-NX5 Series camcorder. It outlines the necessary equipment, which includes the camcorder, AC adapter, USB cable, PC running Windows XP or higher, and the update software file. The steps include extracting the update file, connecting the camcorder to the PC, checking if an update is needed, disconnecting and resetting the camcorder, running the update, and checking the camcorder once complete. The entire process takes approximately 2 minutes and users are warned not to disconnect or power off the devices during the update.

Uploaded by

ottosuseno
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
76 views4 pages

HXR-NX5 Series Software Update Procedure: Necessary Equipment

This document provides instructions for updating the software on an HXR-NX5 Series camcorder. It outlines the necessary equipment, which includes the camcorder, AC adapter, USB cable, PC running Windows XP or higher, and the update software file. The steps include extracting the update file, connecting the camcorder to the PC, checking if an update is needed, disconnecting and resetting the camcorder, running the update, and checking the camcorder once complete. The entire process takes approximately 2 minutes and users are warned not to disconnect or power off the devices during the update.

Uploaded by

ottosuseno
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

HXR-NX5 Series Software update procedure

*Necessary equipment
・ HXR-NX5 Series for update
(Memory card and FMU128 removed)
・ AC Adaptor (AC-VL1 and Connecting cord)
(The update software will not accept battery operation)
・ USB Cable (Supplied accessory)
・ PC (Windows XP, Vista or Windows 7- 32 bit)
・ Update software (NX5V2_Update1005a.zip) (>Software download)

Note for PC
All other application software must shut before starting update.
Fig-1
Update of the camcorder

1. Unzip NX5V2_Update1005a.zip and extract the


folder to your desktop.
2. Double click “NX5V2_Update1005a.exe” in the
extracted folder, and the dialog box for the
update process will be displayed (Fig-1).
3. Turn on the camcorder power using AC adaptor
and Connecting cord.
4. Connect the camcorder to the PC via USB
cable. When “USB SELECT” displays Fig-2
on the LCD panel, select “A” and wait until
“Connected” is displayed.
(Confirm that icon appears in the Task Tray
right bottom of the PC, then Click Next. See
Fig-2.)
Fig-3

5. If the update is necessary, “Current version”


and “Version after the update” displayed at the
bottom left of the dialog box will be different.
Click Next and proceed. (Fig-3)

NOTE: If already updated, the dialog box shows


“The update is not required.
The update process is aborted”
Click Finish and complete.

6. Disconnect the USB connection by “Safely


Fig-4
Remove Hardware” process, click icon in
the Task Tray at the bottom right of the PC.
When “Safe to Remove Hardware” is displayed
on the PC, keep the USB cable connected.
Press RESET button on the camcorder and when
the LCD panel goes off, you then Click Next.
(Fig-4)
Fig-5

7. Reset and connection check is in progress


and the dialog box changes to Fig-5.

8. Click Run and the update process will be started.


While updating (approx. 2 min.) progress bar is
displayed.

DO NOT turn off the power, or disconnect


USB connection while updating.

Fig-6

9. When update process completed, the camcorder


will boot up automatically and the dialog box
changes to Fig-6.
Click Finish and disconnect USB connection.

10. Check that the camcorder is functioning and


turn off the power.
All the update process completed.

You might also like