803-%
-&"%&3
*/
$0/530-

.&"463&.

&/5

PRODUCT GUIDE
CONTENTS
Controller
22 Temperature 52 54 Digital Counter /
page page page
Recorders
Controllers Timers

52 67 Multi Pulse 74 Electrode Level Switch,

page page page
Analog Timers Data Storage Device
Meters Communication Converter,
Temperature and Humidity Converter

Sensor
76 88 103
page page page
Proximity Sensors Photo Sensors Rotary Encoders

Electric Power Device

107 Thyristor Power 115 128
page page page
Solid State Relays Power supplies
Regulators

Control switch
131 Control Switches / 139 Power / Main / 142
page page page
Limit Switches
Combination Display Lights Cam switches

144 145 Foot/Mono Lever/

page page
Micro Switches
Pendant Switches

Sign Towers & Lights

149 154 155
page page page
Sign Towers Wall Mounted Lights Turn Lights

157
page
Warning Lights

Etc
158 Terminal Blocks, Power Buzzers,
page
Fuse Holders, Control Boxes
Selection Table

■ Temperature Controllers
Type LCD Temperature Controllers
Model VX series

NEW

Appearance

・ Wide viewing angle LCD and white backlight ・ High speed sampling cycle ( 50 ms )
Features ・ Several input sensor support ( TC, RTD, Voltage, Current ) ・ IP65 ( IEC 60529 ) front degree of protection
・ High precision ( 0.2 % accuracy ) ・ Convenient parament setting by USB cable

Power voltage 100-240 V a.c. 50/60 Hz, 24 V d.c., Class2

Accuracy ±0.2 % of FS ± 1 digit
Input RTD, thermocouple, DC voltage, DC current
Output Relay output, SSR output, current output
Control type ON/OFF, PID control, 2DOF PID control
Page 22

Multi Input / Output Temperature Easy Operation Temperature

Type Multi Input Temperature Controllers
Controllers Controllers
Model NX series DX series AX series KX series

(NX1 except)
(KX4N)
Appearance

・ Fuzzy function, PID auto-tuning ・ PID auto-tuning ・ Multi Input ・ Multi Input
・ 3 zone PID/ Group PID 3 types ・ Direct/reverse operation internal ・ High speed sampling cycle ・ Decimal point position selection
・ Ramp control function selection (0.1 sec) ・ 2-stage step function by external
・ Heating / cooling control, ・ High and Low alarm output ・ Installation depth: 63 ㎜ contact (KX4S)
Features Heater break alarm ・ Control loop break alarm (LBA) ・ Control output selectable : ・ Output operation selectable :
・ 3 set value type selection function ・ Decimal point display and high / reverse operation/ direct reverse operation/direct
by digital input (DI) low setting limitation operation operation
・ Communication function ・ Retransmission output ・ Control loop break alarm (LBA) ・ PID auto-tuning
(RS485/422)

100-240 V a.c. 50/60 Hz,

Power voltage 100-240 V a.c. 50/60 Hz, 24 V d.c. 100-240 V a.c. 50/60 Hz
24 V d.c.(Exclude KX4S)
Accuracy 0.5 % of FS ±0.3 % of FS 0.5 % of FS
Input RTD, thermocouple, DC voltage
Output Relay output, SSR output, current output
Control type PID control/ ON-OFF control
Page 26 28 25 30

Multi-Channel Digital Temperature Modular Multi-Channel Temperature

Type Multi Input Temperature Controllers
Controllers Controllers
Model MC9 ML series MT100

Appearance

・ 4/8 channel control function ・ Sampling cycle 50 ㎳ ・ Input 4 channels (control: 2 channels,
・ Multi-memory function (ax 8 X 8) ・ 8 Event output contact units monitoring: 2 channels)
・ Heating / cooling control (4 channels) ・ Max. 32 parallel connections (including ML-E) ・ Temperature, pressure, current detection
Features ・ Digital input(DI) ・ Unit power, communication connection by alarm functions
・ Communication function (RS232, RS485/422) side connector ・ Abnormal history display and saving functions
・ Communication function (RS232C, RS485) ・ Medium replenishment and suction function
・ Communication function (RS485/422)

Power voltage 100-240 V a.c. 50/60 Hz 24 V d.c. 100-240 V a.c. 50/60 Hz

Temperature : ±0.3 % of FS ± 1 Digit
Accuracy ±0.3 % of FS ±1 Digit
Pressure : ±3 % of FS ±1 Digit
Input RTD, thermocouple, DC voltage RTD, thermocouple
Relay output, SSR output,
Output Relay output, SSR output, current output Relay output, SSR output
current output, Triac output
Control type PID control / ON-OFF control PID control
Page 40 38 39

4
 Selection Table

■ Temperature Controllers
Type Modular Programmable Temperature Controllers 2-Channel Programmable Temperature Controllers
Model TD510 TD300

Appearance

・ Several alarm functions ・ Max. 100 patterns, 100 segments/pattern

・ Multi input (RTD, TC, VDC) (total 2,400 segments)
・ Communication function built-in (RS485) ・ Several alarm functions
・ Detachable and expandable structure (output: 4 contacts, operation: 20 types)
Features ・ Digital Recorder function ・ Digital input (DI) 8 contacts,
(internal memory, SD card storage) Digital output (DO) 8 contacts
・ Digital input (DI) max. 32 contacts, ・ Communication function
digital output (DO) max. 32 contacts

Power voltage 100-240 V a.c. 50/60 Hz

Accuracy ±0.15 % of FS ±0.1 % of FS
Input RTD, thermocouple, DC voltage
Output Relay output, SSR output, current output
Control type PID control/ ON-OFF control
Page 32 33

Type Modular Programmable Temperature & Humidity Controllers Programmable Temperature & Humidity Controllers

Model TH510 TH300

Appearance

・ Communication function built-in (RS485) ・ 100 patterns (total 2000 segments,

・ Detachable and expandable structure 100 segments / pattern)
・ Temperature, humidity independent ・ Temperature, humidity independent
PID control PID control
Features ・ Digital recorder function ・ Digital input (DI) 4 contacts, digital output
(internal memory, SD card storage) (DO) 12 contacts
・ Digital input (DI) max. 32 contacts, digital ・ Communication function
output (DO) max. 32 contacts

Power voltage 100-240 V a.c. 50/60Hz

Temperature: ±0.2 % of FS /
Accuracy Temperature: ±0.1 % of FS / Humidity: ±1 % of FS
Humidity: ±2 % of FS
Input RTD, DC voltage
Output SSR output, current output
Control type PID control/ ON-OFF control
Page 34 35

Type Thermal Shock Test Controllers Programmable Temperature Controllers

Model TS510 NP200

Appearance

・ Damper & elevator method support ・ Multi input / output, ± 0.1 % high accuracy
・ Multi input(RTD, TC, VDC) ・ 30 patterns, 300 segment
・ Communication function built-in(RS485) (1 pattern / 99 segments)
・ Detachable and expandable structure ・ Heating / cooling PID control
Features ・ Digital Recorder function ・ 3-level PID selection (4 PID groups)
(internal memory, SD card storage) ・ PID auto-tuning mode 2 types
・ Digital input (DI) max. 32 contacts, ・ Digital input (DI) 7 contacts,
digital output (DO) max. 32 contacts User output (UO) 10 contacts
・ Communication function

Power voltage 100-240 V a.c. 50/60Hz

RTD : ±0.1% of FS,
Accuracy ±0.1 % of FS
thermocouple : ±0.15 % of FS
Input RTD, thermocouple, DC voltage
Output SSR output, current output
Control type PID control/ ON-OFF control
Page 37 36

5
Selection Table

Cost-Effective Digital
Type Board Type Temperature Controllers
Temperature Controllers
Model BX8 SM100 ED6

Appearance

・ Fuzzy function, PID auto-tuning ・ 20 Channel integrated digital temperature ・ Heating/cooling control selection
・ 3 zone PID/ Group PID 3 types controller ・ Alarm output and timer output selection
・ Ramp control function ・ ± 0.5% display accuracy of max. range ・ ON/OFF, Proportional control selection
Features ・ Heating / cooling control, Heater break alarm ・ Several alarm functions. ・ 0.1 ℃ / 1 ℃ selection
・ 3 set value type selection function by (digital output 3 contacts) ・ Delay output time setting
digital input (DI) ・ Communication function built-in
・ Communication function (RS485) (RS485/422,RS232C)

100-240 V a.c. 50/60 Hz, 10-24 V a.c.

Power voltage 100-240 V a.c. 50/60 Hz
50/60 Hz or 10-24 V d.c.
Accuracy ±0.5% of FS ±1 Digit ±0.5 % of FS ±0.5 % of FS ±1 Digit
Input RTD, thermocouple, DC voltage RTD, thermocouple
Output Relay output, SSR output, current output SSR output Relay output, SSR output
Control type PID control/ ON-OFF control Proportional control, ON/OFF control
Page 43 42 49

Type Easy Operation Temperature Controllers Temperature Controllers Without Indicator

Model HY-8000S / 8200S / 72D / 48D DF2 HY-1000, HY-2000, ND4 ND4

UPGRADE UPGRADE UPGRADE

Appearance

・ Proportional control or ON / OFF control ・ Proportional control or ・ Proportional control or ON/OFF control
・ Convenient temperature setting ON / OFF control ・ Convenient temperature setting
Features ・ Alarm setting (HY-8200S) ・ Convenient temperature setting ・ Plug-in method ・ Burnout function
・ Sharp digital display ・ Auxiliary output setting (SUB) ・ Strong against vibrations and impacts, so it
・ Sharp digital display can be installed directly on the machine

HY-1000 : 110 V a.c. 60 Hz,

110/220 V a.c. 60 Hz (Common) 220 V a.c. 60 ㎐
110/220 V a.c. 50/60Hz 110/220 V a.c. 50/60 Hz
Power voltage ※ The ND4 power voltages are
(Common) (Common)
HY-2000 : divided into 110 V and 220 V
110/220 V a.c. 60 Hz (Common) specifications.

Accuracy ±1 % of FS ±1 Digit Non-indicating

Input RTD, thermocouple, DC voltage RTD, thermocouple
Output Relay output, SSR output, current output Relay output
Control type Proportional control
Page 44 45 46 47

Type Temperature Controllers For Refrigerators Temperature Controllers For Greenhouses

Model BR6A BR6 HD6

Appearance

・ Heating/cooling control selection ・ Heating/cooling control selection ・ Greenhouse open / close motor control only
・ Alarm output, timer output selection ・ Alarm output and timer output selection ・ 1-, 2-stage control operation according to
・ ON/OFF, Proportional control selection ・ ON/OFF, Proportional control selection set value
Features ・ 0.1℃ / 1℃ selection ・ 0.1 ℃ / 1 ℃ selection ・ Hysteresis setting by ON/OFF output
・ Delay output time setting ・ Delay output time setting ・ Operation according to temperature and
・ Operation convenience improved with the time setting
set move key ・ 0.1 ℃ display function

100-240 V a.c. 50/60 Hz

Power voltage 100-240 V a.c. 50/60 Hz or 100-240 V d.c. 100-240 V a.c. 50/60 Hz
10-24 V a.c. 50/60 Hz or 10-24 V d.c.
Accuracy ±1 % of FS ±1 Digit ±1 % of FS
Input Hanyoung Nux exclusive sensor(TH-570N) Hanyoung Nux exclusive sensor(TH-540N)
Output Relay output, SSR output Relay output
Control type Proportional control, ON/OFF control
Page 48 49

6
 Selection Table

■ Temperature Indicators
Type Digital Temperature Indicators Multi Input Temperature Indicators
Model BK3 BK6-M

Appearance

・ 0.5 % high accuracy indicator ・ Multi Input (thermocouple, RTD, voltage ・

・ Simple exclusive indication current)
・ Character height 14.2/20.0 ㎜ LED applied ・ Retransmission output (4 - 20 ㎃ d.c.)
Features
・ Temperature unit selection
・ Measured value correction function

Power voltage 110/220 V a.c. 50/60Hz(Common) 100-240 V a.c. 50/60 Hz

Accuracy ±0.5 % of FS ±0.5 % of FS ±1 Digit

RTD, thermocouple, DC voltage,
Input Multi Input (19 types), thermocouple, RTD
DC current
Page 50 51

■ Data Storage Devices ■ Floatless Level Switches ■ Electrode Holder

Type Data Storage Devices Floatless Level Switches Electrode Holder
Model EM310 FS - 3A HY-ER3

Appearance

・ 32 Mbyte data storage device ・ Used for agricultural water, water treatment ・ IP63 (IEC 60529) degree of protection
・ Convenient panel installation type (72 × 36 ㎜) plant, sewage treatment plant, factory and ・ The PBT flame retardant provides robustness
・ USB port for memory stick connection several surface water control and reduces the fire risk
Features ・ Lightweight and easy to install ・ Body and cover are connected by hook
・ Operation status is indicated by LED coupling structure so they are easily detached
by screwdriver

110 V a.c. 50/60 Hz,

Power voltage 24 V d.c. 500 ㎃ -
220 V a.c. 50/60 Hz
Page 74 75

■ Converters
Temperature /
Type Ethernet To Serial Converters Communication Converters
Humidity Converters
Model HMCE-103 CV310 CV300 CV250

Appearance

・ Several connection interface ・ RS232 and RS485 / RS422 ・ RS422/485 Line Drive Automatic ・ DIN rail and bolt fixing mounting
support (RS232 / RS485 / RS422) 2 kV electrical insulation built-in Control method
・ Open network protocol support protection device ・ Switch settings enable/disable ・ Uniform with DC signal
・ Up to 3 clients can be ・ RS485 Echo, Non-Echo function various modes of operation ・ Relative humidity calculation by
simultaneously connected support ・ Up to 1.5 km, 256 node dry bulb temperature and wet
Features ・ Excellent compatibility with fast connectivity bulb temperature
transmission/reception switching ・ LED for Power and Data ・ Two-wire transmission line is
speed Communication Status Indication simple
・ Max. 1.2 Km, 256 Node ・ Linear signal
connection available

9 V, 300mAd.c. Adapter (1.3 Ø d.c

Power voltage 5 V d.c. (±10 %) 9-30 V d.c. 100-240V a.c. 50/60 Hz
Jack)
Page 74

7
Selection Table

■ Recorders
Type Touch Screen Recorders 2-channel temperature controllers & recorders
Model GR200A RT9N

UPGRADE
Appearance

・ High-definition screen : 5.7” 640×480 TFT-LCD ・ Multi input/output

・ Large memory: SD and SDHC card support (internal memory: 80 MB) ・ Communication function(RS485)
Features ・ 3-language support: Korean, English, Chinese (simplified) ・ Free scale function
・ Data storage and parameter backup function with SD card ・ PID auto-tuning
・ RS485/422/ETHERNET ・ Temperature record & control

Power voltage 100-240 V a.c. 50/60 Hz

Accuracy ±0.15 % of FS ±1 Digit ±0.5 % of FS
Input RTD, thermocouple, DC voltage
Channels 2/4/8/12 channels 1/2 channels
Contact outputs 6contacts, 12contacts Alarm: 2 contacts, Control output: 1 contact
Page 52 53

■ Counter / Timers
Type LCD Counter / Timers
Model LC series

NEW

Appearance

・ Improved visibility with the wide viewing angle LCD and white display ・ Pre-scale setting range expanded (0.00001 ~ 999999)
・ Using the tack switch and applying ABS material (enhanced durability) ・ Support for RS485 Communication (Modbus RTU)
Features
・ IP66 Protection Structure (Front of Product)

Power voltage 100-240 V a.c. 50/60 ㎐, 24-48 V a.c. 50/60 Hz or 24-48 V d.c. (Voltage fluctuation rate: ±10 %)
Type Preset method
Control functions Counter, Timer
Display digits 4 digits, 6 digits
Setting stages 1-stage setting, 2-stage setting
Page 54

Type Digital Counter / Timers Digital Counter

Model GF series LC1

UPGRADE
Appearance

・ Counter & timer functions ・ Compact LCD indicating total counter

・ Pre-scale setting (GF7) ・ External power not needed with the built-in battery
・ 14 input operations, 16 output operations ・ You can reuse the product by replacing the battery
Features ・ Decimal places setting ・ Small Power consumption and long battery life
・ 16 timer ranges (decimal / sexagesimal 8 types) ・ Non-voltage or voltage input
・ NPN/PNP (voltage / non-voltage) input selection ・ IP66 (IEC 60529) degree of protection (front side)

Power voltage 100-240 V a.c. 50/60 Hz Lithium battery built-in

Type Preset method, Indication only Indication only
Control functions Counter, Timer Counter
Display digits 4 digits, 6 digits 8digits (addition)
Setting stages 1-stage setting, 2-stage setting -
Page 55 56

8
 Selection Table

■ Timers
Type LCD Timers
Model LT4 / LT4S

NEW

Appearance

・ Bright and easy to view with the wide viewing angle LCD ・ Several time ranges (0.01 sec ~ 9999 hrs)
・ IP66 Protection Structure (Front of Product) ・ Several operation modes
・ Time limit 1c, Instantaneous 1c + Time limit 1c, Time limit 2c, (LT4: 7 operation modes, LT4S: 10 operation modes)
Features STAR + DELTA ・ One-shot output time setting (0.01 sec ~ 99.99 sec)
・ Minimum signal time selection (1 ms / 20 ms)

Power voltage 24 - 240 V a.c. 50/60 Hz or 24 - 240 V d.c.

Display digits 4 digits
Time specs 0.01 sec ~ 9999 hour
Page 57

Type LCD Timers LCD Weekly & Yearly Time Switches

Model LT1 LF4N LY series

Appearance

・ External power not needed with the built-in ・ LCD display (displays several functions) ・ Easy to check and change programs
battery ・ Multi input ranges (10 types) ・ Automatic change of seasonal program
・ You can reuse the product by replacing the ・ Multi output operations (10 types) according to season setting function
battery ・ Bar graph over time display ・ It is possible to add the yearly program to the
Features ・ Long battery life with small power ・ Reset, start and inhibit inputs weekly program
consumption ・ The holiday setting function can block the
・ Non-voltage or voltage input output during the selected holidays
・ IP66 Protection Structure (Front of Product)

Power voltage Lithium battery built-in 24-240 V a.c. 50/60 Hz or 24-240 V d.c. 100-240 V a.c. 50/60 Hz
Display digits 8 digits (addition) 3 digits 4 digits, 2 lines
Type Indication only - -
Time specs - 0.01 s ~9990 h Minimum spacing interval: 1 minute
Page 56 60 61

Type Digital Twin Timers Digital Timers

Model TT7H TT4 TF4A

UPGRADE
Appearance

・ Output operation control according to external ・ Free voltage (100 - 240 V a.c 50/60 ㎐) ・ Simple functions, convenient setting
START input signal ・ Dual timer & twin timer functions ・ Range selection with front side deep switch
・ Individual setting of ON time and OFF time (Can be used as 2 independent timers) (2 types)
Features
・ Wide power specifications ・ Output operation control according to external ・ Decimal or sexagesimal
(100 - 240 V a.c 50/60 ㎐) input signal (START, RESET, INHIBIT) ・ Relay or transistor output

Power voltage 220 V a.c. 60Hz 100-240 V a.c. 50/60Hz 100-240 V a.c. 50/60 Hz, 24-60 V d.c.
Display digits 4 digits 3 digits, 4 digits
Time specs 0.01 s ~9999 hour Refer to standard range
Page 58 59

9
Selection Table

■ Analog Timer
Type Timing Relays ON-Delay Timer Twin / Dual Timers Multi Timers Star-Delta Timers
Model T21 T38N, T48N, T57N TF62N, TF62D MA4N MA4SD

Appearance

・ Timing Relay ・ Time progress display ・ Time progress display ・ Output operation modes ・ 8-pin plug type
(time limit 4c) using ON LED using ON LED (6 types) ・ High capacity motor start
・ Plug-in type (14 pins) ・ Several time ranges ・ Several time ranges ・ Multi range (4 types) timer
・ Time range and operation (7 types) (7 types) ・ Time units (4 types) ・ Star-delta contact
Features mode customizable by the ・ Time unit selectable ・ Time unit selectable ・ Reset, start and inhibit outputs, Instantaneous
user (hours, minutes, seconds) (hours, minutes, seconds) inputs contact outputs
・ Several time ranges ・ Several model ・ Several model ・ Wide power specifications
・ Multi operation mode configurations (5 types) configurations (5 types) (AC/DC dual usage)

24-240 V a.c. 50/60 Hz or

100-120 V a.c. 50/60 Hz,
24-240 V d.c., 100-240 V a.c. 50/60 Hz,
Power voltage 200-230 V a.c. 50/60 Hz, 24-240 V a.c. 50/60 Hz or 24-240 V d.c.
12 V d.c.(T48N Only, Order 24-240 V d.c.
24 V d.c.
Specification)
Time range selection Minimum spacing interval :
Time specs 0.1 s ~ 24 hour 0.01 s ~ 60 hour 1~300 s
(3 types) 1 minute
Page 62 63 64 65 66

■ Multi Pulse Meters

Type LCD Multi Pulse Meters
Model LP3

NEW
Appearance

・ Improved visibility with the wide viewing angle LCD and white display ・ Expand Maximum Display Range : -99999 ~ 99999
・ 66.4 mm Short Back Length ・ Various functions : AUTO ZERO, Start compensation timer, comparative
Features ・ IP66 Protection Structure (Front of Product) output limit, hysteresis, Set display period, select time unit, display
maximum and minimum values, electrostatic memory, etc.

Power voltage 100-240 V a.c. 50/60 Hz

Number of revolutions, frequency, speed, Moving speed, cycle, transit time, time difference, time width,
Operation modes
measured length, interval, integration, absolute ratio, error ratio, density, error
Input frequency Contactless (max. 50 K㎐, ON/OFF pulse width 10 us min), contact (max. 30 ㎐, ON/OFF pulse width min. 16.6 ㎳)
Display cycle 0.05, 0.5, 1, 2, 4, 8 sec
Output Proportional control, ON/OFF control
Page 67

Type Small LCD Pulse Meters Multi Pulse Meters Digital Wattmeters
Model LP1 BP6 WM3

Appearance

・ Small LCD Pulse Meters ・ Auto zero time setting ・ Effective power display by RMS measurement
・ Rotation speed / Frequency measurement ・ Comparative output (HH, H, GO, L, LL) ・ Converter not needed with the voltage and
・ 5-digit display available ・ Start compensation timer function current measurement method
Features ・ External power not needed with the built-in ・ Max. value (5 types), min value (5 types) save ・ Several outputs
battery ・ Power outage compensation function (Relay 4 - 20 ㎃ d.c open collector)
・ Non-voltage or free voltage input ・ Max. 50 K㎐
100-240 V a.c. 50/60 Hz,
Power voltage Lithium battery built-in 100-240 V a.c. 50/60 Hz
24-60 V a.c. 50/60 Hz or 24-60 V d.c.
・ Remote local switching (communication output type)
Number of revolutions, frequency, speed,
・ Display max / min value by front key
Moving speed, cycle, transit time, time
・ Function of handling average value and
Operation modes Revolution speed, frequency difference, time width, pulse width,
delaying displaying cycle
pulse interval, integration counter, absolute
・ Changing comparative output setting
ratio, error ratio, density, error
・ Set value changing protective function
Input frequency - 50 KHz -
Display cycle - 0.05, 0.5, 1, 2, 4, 8 sec Min. : 0.1 second, Max. 2 second
Display only, 4 - 20 ㎃ d.c. relay (HI, GO, LO),
Output - Relay, transistor
transistor, communication (RS485)
Page 68 72 70

10
 Selection Table

Type LCD Multi Panel Meters

Model LM

NEW
Appearance

・ Use optical night angle LCD and white backlight ・ RMS and AVG Selection Instrumentation
・ Short rear length of 68 mm (LM3) and 81 mm (LM6) ・ MODBUS Communication Support
Features ・ IP66 Protection Structure (Front of Product) ・ Maximum measurement input specification
(500 V d.c., 500 V a.c., 5A d.c., 5A a.c.)

Power voltage 100-240 V a.c. 50/60 Hz

Display digits -9999 ~ 9999

Operation mode (6), hysteresis, alternating current frequency measurement, zero adjustment, initialization, lower display deviation correction,
Functions key lock transmission output scale adjustment, start compensation timer, free scale, slope adjustment, error correction, display period delay,
maximum/minimum monitoring,

Input ・ DV: DC voltage ・ DA: DC current ・ AV: AC voltage / frequency ・ AA: AC current / frequency
・ Contact Output : 3-layer, SPST (1a), 250 V a.c. 5A ・ Contactless output : 3-speed, NPN/PNP, Open Collector, 12-24 V d.c. 50mA
Output
・ Transmission Output (4–20 mA), RS485 Output
Page 69

Type Digital Scale Meters Non-Power Scale Meters

Model HP3 HLP1

Appearance

・ High accuracy indicator ・ Non-power free scale

(±0.03 % of F.S) ・ High accuracy indicator (±0.3 % of FS)
Features
・ Max. display (-19999 ~ 19999) ・ Max. display (-1999 ~ 9999)
・ Communication function (RS232 or RS485) selection ・ Current input (4-20㎃ d.c.)
Power voltage 100-240 V a.c. 50/60 Hz Non-power
Display digits ±19999 -1999 ~ 9999
Functions Scale meter

Input 1 channel 1 - 5 V d.c., 4 - 20 ㎃ d.c. 4-20㎃ d.c.

Output 4 - 20 ㎃ d.c. Alarm output 2 contacts Indication only

Page 72 68

Type Digital Voltmeter / Ammeters

Model BS BA1

Appearance

・ Bright and clear LED display ・ Bright and clear LED display
・ Cost-effective ・ Cost-effective
Features ・ Max. display 1999 ・ Max. display 1999
・ Average value measurement

BS1: 100-240 V a.c. 50/60 Hz, BS3/6: 110/220 V a.c. 50/60 Hz

Power voltage 5 V d.c., 12-24 V d.c.
(Common)

Display digits ±19999

Polarity display (BS3)

Functions Decimal point and polarity display over range indication
Indication value hold by external contact

4 - 20 ㎃ d.c. / 1 - 5 V d.c.
4 - 20 ㎃ d.c. / 1 - 5 V d.c.
Input AC voltmeter / AC ammeter/
DC voltmeter / DC ammeter
DC voltmeter/ DC ammeter

Output Indication only

Page 71 73

11
Selection Table

■ Proximity Sensors
Inductive Round Type Proximity Inductive Square Type Proximity Inductive Flat Type Proximity Capacitive Type Proximity
Type
Sensors Sensors Sensors Sensors
Model UP□R series UP□S series UP□F series CUP series

Appearance

・ Wide operating voltage ・ Wide operating voltage ・ Wide operating voltage ・ Noise resistant reinforced circuit
(5- 35 V d.c. : DC 3-wire) (5-35 V d.c. : DC 3-wire) ・ Noise resistant reinforced circuit ・ Leakage current less than 2 mA
Features ・ Noise resistant reinforced circuit ・ Noise resistant reinforced circuit ・ 2-wire type proximity nonpolar 20-240 V a.c. 50/60 Hz or
・ 2-wire type nonpolar applied ・ 2-wire type nonpolar applied applied 20-240 V d.c.

12-24 V d.c., 20-240 V a.c.

Power voltage 12-24 V d.c., 100-240 V a.c. 50/60 Hz
50/60 Hz or 20-240 V d.c.
Shield Shield, Non shield - Non shield
Sensing distance 1.5, 2, 4, 5, 8, 10, 15 ㎜ 2, 4, 5, 8, 10,12,15,20 ㎜ 8㎜ 8,15 ㎜
Protective
IP67
Structure
Page 76 81 84 86

■ Photo Sensors
Type General Purpose Photo Sensors Amplifier Built-In Photo Sensors Flat Photo Sensors
Model PB series PLD PY series

NEW
Appearance

・ 25.4mm standard mounting hole ・ Power reverse connection and output short ・ Light ON / Dark ON mode switching selection
・ Hanyoung Nux new ASIC chip used ・ Diffuse-reflective type with 2 m of sensing by control wire
(operation stabilty, long-distance detection) distance ・ Power reverse connection and output short
Features ・ Built-in VR for sensitivity adjustment ・ 1 ㎳ response time ・ Convenient installation with the ultra slim size
・ Excellent noise immunity and reduced ・ Sensitivity adjustment volume built-in (16 X 28 X 8 ㎜)
disturbance of light influence ・ 1 ㎳ response time
・ Strong protection circuit ・ Control output and stable output display
Power voltage 12-24 V d.c.
Through-beam, Diffuse-reflective,
Sensing mode Retro-reflective (mirror), Retro-reflective Diffuse-reflective Through-beam
(polarized mirror), Distance-settable
7 m, 10 m, 15 m, 0.1 - 3 m,
Sensing distance 2m 3m
1 m, 100 mm, 400 mm
Operating mode Light ON , Dark ON Light ON Light ON , Dark ON
Operating mode Max. 1 ㎳
Protective
IP65 IP64 IP67
Structure
Page 88 94 89

U-Shaped Fast Response Long Distance Detection

Type Voltage Output Photo Sensors Round Photo Sensors
Photo Sensors Photo Sensors
Model PN series PR series PU series PEN series

Appearance

・ Power reverse connection and ・ Output cutoff over current ・ Solid die casting case ・ Long distance detection
output short circuit protecting protecting circuit built-in ・ Optic axis control not needed ・ Stability indication
circuit built-in ・ Sensitivity adjustment volume ・ Sensitivity adjustment volume
Features ・ Motion display light attached attached attached
・ Sensitivity adjustment volume ・ Light ON /Dark ON selection ・ Operating mode selection by
attached power polarity reverse connection
24-240 V a.c. 50/60 Hz or
Power voltage 12-24 V d.c.
24-240 V d.c.
Through-beam , Diffuse-reflective,
Sensing mode Through-beam, Diffuse-reflective, Retro-reflective Through-beam
Retro-reflective
Sensing distance 3 m, 0.1 - 1 m, 200 ㎜ 7 m, 10 m, 0.1~2 m, 0.1 m, 0.4m 30 ㎜, 50 ㎜ 10 m, 0.1 - 5 m, 700 ㎜
Operating mode Light ON , Dark ON
Response time Max.3 ㎳ Max.1 ㎳ Max.1 ㎳ Max.20 ㎳
Protective
- IP66 IP65 IP64
Structure
Page 90 91 92 96

12
 Selection Table

■ Photo Sensors
Power /Amplifier Built-In
Type Power Built-In Photo Sensors Distance-settable Photo Sensors
Photo Sensors
Model PTX series PE series PL-D2B

Appearance

・ Terminal block type connection for convenient ・ Cost-effective ・ Distance setting reflective type by 2 split
wiring ・ Wide power voltage photo diodes
・ Wide power voltage range ・ Relay output ・ Power reverse connection and output short
Features
・ Timer function available ・ Operation status indication attached circuit protective circuit built-in
・ NPN/PNP open collector simultaneous output ・ Lower impact of dust with the flat lens
with DC power
24 V d.c., 100-240 V a.c. 50/60 Hz or
Power voltage 24-240 V a.c. 50/60 Hz or 24-240 V d.c. 12-24 V d.c.
100-240 V d.c.
Sensing mode Through-beam , Diffuse-reflective, Retro-reflective Distance-settable
Sensing distance 15 m, 7 m, 1 m 5 m, 0.1 - 3 m, 500 ㎜ 0.2 - 2 m
Operating mode Light ON , Dark ON
Power built-in type : max. 20 ㎳
Response time Max.25 ㎳ Max.2 ㎳
Amplifier built-in type : max. 1 ㎳
Protective
IP66 IP54 IP65
Structure
Page 93 92 95

■ Fiber Optic Sensors

Type Fiber Optic Sensors Multi-Function Digital Fiber Optic Sensors
Model PG series PFB PFD

Appearance

・ Applicable to any application with the AMP unit ・ Sensitivity setting by auto-teaching ・ Sensitivity setting by auto-teaching
4 type and several fiber unit types. ・ External teaching input/external synchronous ・ 7-Segment 4-digit LED display
Features ・ Easy to install to a 35 mm wide DIN rail, input ・ Mark detection/ counter / tachometer
so less installing space is needed. ・ Output delay time (40 ㎳ fixed) functions (multi-type)
・ Light ON/ Dark ON selection by slide switch ・ Output delay time setting(1~9999 ㎳)

Power voltage 12-24 V d.c.

Sensing mode Through-beam, Diffuse-reflective
Sensing distance By fiber optic cable
Operating mode Light ON , Dark ON
Response time Max. 1 ㎳ RM : Max. 1 ㎳, RG : Max. 0.7 ㎳
Protective
IP40 IP40 IP40
Structure
Page 97 99 98

■ Area Sensors ■ Sensor Controllers

Type Area Sensors Area Sensors Type Sensor Controllers
Model PAS series PAN series Model HPA-12

Appearance Appearance

・ Less installation space (thickness : 13.5 ㎜, ・ Several optical axis distances(20/40 ㎜)

width : 30 ㎜) ・ Output short circuit protection circuit built- ・ NPN/PNP dual usage input
・ Automatic sensitivity correction function in sensor controller
Features
built-in ・ Operating mode selection (all optical axes/1 ・ Solid output contact
・ Minimum sensing object (Ø30 ㎜) optical axis light ON) Features ( 250 V 3 A, more than
100,000 times )
Power voltage 12-24 V d.c. ±10% ripple (p-p) 10% or less ・ Convenient installation with
plug in method
Sensing mode Through-beam
Sensing distance 5m 7m Power voltage 220 V a.c. 50/60 Hz
Emitter : M/S mode switch switching type Functions Universal
( Master / Slave ) Power
Operating mode Light ON or Dark ON Approx. 4 VA
Receiver : D/L mode switch switching type consumption
( Dark ON, Light ON )
External output
12 V d.c., ± 10 %, 50 ㎃ max.
Response time Max. 7 ㎳ Max. 15 ㎳ power
Protective Relay 1c, 250 V a.c., 3A
IP40 (IEC Specification) IP65 (IEC Specification) Output
Structure (resisitive load)
Page 100 101 Page 102

13
Selection Table

■ Sensor Controllers
Type Universal High function (timer) For connection of 2 connections.
Model HPAN-C7 HPAN-CT7 HPAN-C7W

Appearance

Features ・ Contact/contactless, 2 outputs built-in (HPAN-C7, HPAN-CT7) ・ For connecting 2 sensor ・ Corresponds to DIN rail
Power voltage 100-240 V a.c. 50/60 ㎐ ±10 %
Functions 2 inputs 1 output 2 inputs 2 output
Power consumption Approx. 5 VA
External output power 12 V d.c. ( ± 10 %), load current : max. 200 ㎃
OUT 1 OUT 1, OUT 2
Contact
Output Relay 1 c, 250 V a.c., 3A (resisitive load) ※ HPAN - C7W ( 1 c X 2 relay contact)
Contactless NPN open collector 30 V d.c., Max. 200 ㎃ -
Page 102

■ Rotary Encoders
Type Ø30, Ø40, Ø50 Shaft Type Ø40 Hollow Shaft Type Ø40 Blind Shaft Type Wheel Type
Model HE30B, HE40B, HE50B HE40H HE40HB PSC

Appearance

・ Wide power voltage ・ Wide power voltage ・ Wide power voltage ・ The wheel type detection
(5 - 12 / 12 - 24 V d.c.) (5-12 V d.c. / 12-24 V d.c.) (5-12 V d.c. / 12-24 V d.c.) structure is suitable for length
・ Several output specifications ・ Several output specifications ・ Several output specifications and speed measurement
Features
・ Convenient installation structure ・ Convenient installation structure ・ Convenient installation structure ・ Several measuring units (6 types)
・ Convenient installation structure

5-12 V d.c.± 5 %,
Power voltage 5-12 V d.c.±5 %,12-24 V d.c.±5 %, 5 V d.c.±5 %
12-24 V d.c.±5 %, 5 V d.c.± 5 %
Output phase
Phase difference between A, B phases : T/4±T/8 (1 cycle of A phase=T)
difference
Response time Max.1 ㎲
1, 2, 5, 10, 12, 15, 20, 25, 30, 40, 45, 50, 60, 75, 100, 120, 125, 150, According to the minimum
Number of pulses
192, 200, 240, 250, 256, 300, 360, 400, 500, 512, 600, 800, 1000, 1024 measured length
Page 103 104 105 106

■ Thyristor Power Regulators

Type 3-Phase Power Regulator Small single-phase power regulator Small 3-phase power regulator
Model TPR-3 TPR-2G TPR-2M TPR-3M

NEW
Appearance

・ Status indication with 9 LEDs ・ TPR-2N compliant ・ Several protection functions ・ 110 ㎜ (width) small 3-phase slim
・ Various alarm functions ・ An economical price (heater break, overcurrent, type thyristor power regulators
・ Slim Size heat sink overheating, ・ Improved safety with the separate
・ Soft start / Soft down
・ Phase Control, Cycle Control SCR short circuit, etc) power supply
・ Built-in fast fuse (Order Specification) ・ Improved safety by of circuit ・ 4 LEDs to check operation status
Features
・ Various alarm verification functions power supply and load power and alarm
(50A/70A only) supply separation (free voltage) ・ Several alarm functions. "Caution"
・ SOFT START(60sec), SOFT UP/ and "warning" alarm separation.
DOWN(15sec)

Power 220 V a.c. 50/60 Hz, 100-240 V a.c. 50/60 Hz,

220 V a.c., 380 V a.c. / 440 V a.c. 100-240 V a.c. 50/60 Hz
voltage 380 V a.c. 50/60 Hz 100-440 V a.c. 50/60 Hz
Rated current 200 A, 250 A, 320 A, 500 A 25 A, 35 A, 50 A, 70 A 25 A, 35 A 25 A, 45 A

Phase control (Shipment Mode), Phase control ,

Phase control (standard),
Control type Phase control, ON/OFF control Fixed cycle control(Option), Fixed cycle control (Option)
Variable cycle control (optional)
Variable cycle control(Option) Variable cycle control (Option)

Page 107 108 109 110

14
 Selection Table

Slim Type Single-Phase Thyristor Slim Type 3-Phase Thyristor Power

Type 3-Channel Each Phase Control Thyristor Power Regulators
Power Regulators Regulators
Model TPR-2SL TPR-3SL-EP TPR-3CH-EC TPR-3SL

NEW NEW
Appearance

・ Alarm output divided into caution ・ 3 individual phase controls ・ 3 individual phase controls ・ The slimmest type among
and warning available in one product available in one product 3-phase thyristor power
・ Several Control types available ・ Setting and monitoring with ・ Set up and monitor with regulators under the same rating
depending on load RS485 communication Ether CAT communication (110 ㎜)
・ Several protection functions ・ Load input power single-phase, ・ Load input power single phase, ・ The heat sink excellent design
Features ・ Improved safety by of circuit and 3-phase available. Free all three phases possible and several protection circuits
power supply and load power voltage available (100-440 V a.c) ・ Various protection features provide high durability.
supply separation ・ Several protection functions ・ Improved safety with the
(free voltage circuit) separation of circuit power supply
and load power supply
・ Several alarm functions

100-240 V a.c. 50/60 Hz, 100-240 V a.c. 50/60 Hz,

Power voltage 100-240 V a.c. 50/60 Hz, 100-440 V a.c. 50/60 Hz
380-440 V a.c. 50/60 Hz 380-440 V a.c. 50/60 Hz
Rated 40 A, 55 A, 70 A, 90 A,
40 A, 55 A, 70 A, 90 A,130 A,160 A
current 110 A, 130 A, 160 A, 200 A
Phase control, cycle control,
Control
ON/OFF control Phase control, fixed cycle control,variable cycle control, ON/OFF control
type
(dip switch selection)
Page 111 112 113 114

■ Solid State Relays

Single-Phase Solid State Relays
Type Single-phase contactless relay
For PCB Substrate
Model SSR-2C HSR-PD

NEW
Appearance

60 ℃ / 80 ℃ Temperature detection prevents ・ High insulation between input and output

overheating ・ Compact, lightweight, with large capacity
・ High reliability as non-contact
・ Zero cross switching
Features

Input voltage 4-32 V d.c. 4-32 V d.c.

Rated load
25 A, 40 A 3 A, 5 A
current
Load voltage 90-264 V a.c. 50/60 Hz 90-240 V a.c. 50/60 Hz
Page 115 127

Type Single-Phase Solid State Relays 3-Phase Solid State Relays

Model SSR-2 HSR-2 SSR-3 HSR-3

NEW NEW
Appearance

・ Terminal protection cover for ・ High insulation between input ・ Terminal protection cover for ・ High insulation between input
safety and output safety and output
・ Operation check by operation ・ High reliability as non-contact ・ Operation check by operation ・ High reliability as non-contact
Features indicator (red LED) ・ C-R Snubber, Zero cross switching indicator (red LED) ・ C-R Snubber, Zero cross switching
・ Zero cross switching/ random ・ Zero cross switching / random
switching switching

Input voltage 4.6-32 V d.c., 70-264 V a.c. 4-32 V d.c., 90-264 V d.c. 4.6-32 V d.c., 70-264 V a.c. 4-32 V d.c., 90-264 V d.c.
Rated load
10 A, 20 A, 30 A, 40 A 10 A, 20 A, 30 A, 40 A, 50 A,70 A 10 A, 20 A, 30 A, 40 A 10 A, 20 A, 30 A, 40 A, 50 A, 70 A
current
Load voltage Low pressure : 90-264 V a.c. 50/60 Hz, High pressure : 90-480 V a.c. 50/60 Hz
Page 116 118 120 122

15
Selection Table

Slim Type Single-Phase 2-Wire Cutoff

Type Slim Type 3-Phase Solid State Relays
Solid State Relays Solid State Relays
Model HSR-SL HSR-2SLD HSR-3SL

Appearance

・ 22.4 ㎜ Slim Type ・ Status indication with several LED displays ・ Improved safety and working convenience
・ Load voltage 90 - 264 V a.c. / 90 - 480 V a.c. ・ Control each phase simultaneously with the with the heat sink one-body type
・ High insulation between input and output 2-wire disconnection function ・ Can be installed in small spaces with the
・ C-R Snubber, Zero cross switching ・ When the temperature of heat sink is 60 ℃ / small design
Features 80 ℃, the alarm output works and operation ・ It is the slimmest type among the 3-phase
stops solid state relays under the same rating (79 ㎜)
・ It has the mandatory functions required from
FPD industry

Operating voltage
4-32 V d.c.
range
Rated load
15 A, 25 A, 40 A 25 A, 40 A 15 A, 25 A, 40 A
current
Load voltage Low pressure: 90-264 V a.c. 50/60 Hz, High pressure: 90-480 V a.c. 50/60 Hz
Page 124 125 126

■ Power Supplies
Type DIN Rail Type Power Supplies Enclosed type Power Supplies Small Rail Type
Model DPS TPS HNPS

Appearance

・ 35 ㎜ width DIN Rail installation method ・ Input inrush current limit ・ Easy Rail Installation (DIN)
・ Low output voltage fluctuation ・ Output voltage adjustable volume ・ Output Voltage Variable
・ High efficiency and low heat generation ・ Overcurrent/overvoltage/short circuit ・ Overcurrent Protection
Features
・ Overcurrent, overvoltage, overheating protection/overheating protection ・ Input Inlet Current Limit
protection functions

1output 15 W, 30 W, 50 W, 75 W, 100 W 3 W, 7.5 W

Power 15 W, 30 W, 50 W,
output 75 W, 100 W, 120 W, 180 W, 216W, 240 W 55 W, 100 W, 150 W, 220 W,
2output -
230 W, 350 W, 450 W
Input voltage 100-240 V a.c., 100-120 V a.c., 200–240 V a.c. 100-240 V a.c. 50/60 ㎐
5 V, 12 V, 15 V, 24 V, 48 V, 24/05 V,
Output voltage 5 V, 12 V, 15 V, 24 V, 48 V 5 V, 12 V, 15 V, 24 V
24/12 V, 24/24 V
Voltage fluctuation
± 5 ~ 10 % (According to internal VR) ±10 % (Variable by volume : V.ADJ)
range
Protection circuit Overcurrent, overvoltage, overheating, output short-circuit protection Overcurrent protection
3 kVAC (Input - Output to), 1.5 kVAC (Input -
Dielectric strength 2,700 V a.c. 1 min (Input - Output) Between FG), 500 V a.c. (Output to FG),
(Detection current : 10 mA, to 1 min)
Page 129 128 130

■ Control Switches
Type Ø 22, Ø 25, Ø 30 Advanced LED Switch Ø 25,Ø 30 Affordable LED Switch Ø 16, Ø 22 Small LED Switch
Model MR CR DR

NEW NEW
Appearance

・ 3 aluminum guard and 2 plastic guard types ・ 1a1b one-body type ・ 1a1b one-body type
provide wide configuration possibilities ・ Long life with the bright LED light source ・ Long life with the bright LED light source
・ Double break snap action open / close contacts ・ Convenient product configuration with the ・ The control and contact parts are modular and
Features with self-diagnosis function for high contact modular actuators and contacts convenient to configure the product.
reliability ・ High contact reliability with the slow-make
contact point and self-diagnosis function

Push buttons, illuminated push buttons, pilot Push buttons, illuminated push buttons, pilot Push buttons, illuminated push buttons, pilot
lamps, selectors, key selectors, illuminated lamps, selectors, key selectors, emergency lamps, selectors, key selectors, illuminated
Type selectors, emergency switches, illuminated switches selectors, emergency switches, illuminated
emergency switches, buzzers emergency switches

Power 100-240 V a.c. 50/60 Hz, 380 V a.c. 50/60 Hz, 100-240 V a.c. 50/60 Hz,
voltage 12–24 V a.c. 50/60 Hz or 12-24 V d.c. 12–24 V a.c. 50/60 Hz or 12-24 V d.c.
Dielectric
2,000 V a.c. for 1 min 1,500 V a.c. 60 Hz for 1 min 1500 V a.c. 50/60 ㎐ for 1 min
strength
Page 135 133 131

16
 Selection Table

■ Control Switches ■ Combination Display Lights

Type Ø22, Ø25 Combined LED Switch Type LED Square Indicators LED Combination Display Lights
Model AR Model CR40 CDN

NEW
Appearance Appearance

・ Display surface size 40 X 32 ㎜ ・ Display surface size 30 X 30 ㎜,

・ Elegant European design ・ Bright LED light source 30 X 40 ㎜ 2 Type
・ Easy to attach and detach actuators and ・ Convenient individual mounting, ・ 6 Indicating colors
Features contacts gathered / assembled mounting ・ Simple assembling. Able to change
・ Ø22, Ø25 Dual usage Features
・ Gathered / assembled mounting by the colors on the spot
the + appearance connector ・ Max. 200 compositions
(Die casting) (10 rows, 20 columns)
Push buttons, illuminated push buttons,
Type pilot lamps, selectors, illuminated selectors,
key selectors, emergency switches Power 100-240 V a.c. 50/60 Hz, 110/220 V a.c. 50/60 Hz,
voltage 380 V a.c. 50/60 Hz, 12-24 V d.c. 24 V a.c. 50/60 Hz or 24 V d.c.
Power
voltage 110 V a.c. 50/60 Hz, 220 V a.c. 50/60 Hz LED Display Color Red, green, yellow, blue, white Red, green, yellow, white, orange, blue

Dielectric 2,000 V a.c. for 1 min Dielectric

1,500 V a.c. for 1 min 2,000 V a.c. for 1 min
strength (among pole terminals) strength
Page 137 Page 138

■ Power Switches
Type Power Switches
Model HY-500 BE

Appearance

・ Directly turn ON/OFF the power of compact electric motor ・ Directly turn ON/OFF the power of compact electric motor
・ Exposed type/flush type, plastic/cold rolled steel case ・ Exposed type/flush type, plastic/cold rolled steel case
・ Push buttons for turning ON/OFF electric motors ・ Push buttons for turning ON/OFF electric motors (forward,
Features
(forward, reverse operations) reverse operations)
・ Lamp power ON/OFF switch mounting type ・ Waterproof non-flammable ABS Plastic Case
・ Electrical appliances safety certification
Rated capacity 250 V a.c. 15A 440 V a.c. 15 ~30 A
Display legends ON, OFF, FOR, STOP, REV
Case material Cold rolled steel case, Plastic Cold rolled steel case, Non-flammable ABS
Page 139

■ Cam Switches ■ Main Switches

Type Cam switches Type Main Switches
Model HY-SQ5/255/305/MRK SQ4 Model MAS

Appearance Appearance

● HY-SQ5 /305/255 series ・ Small Cam switches (48 X 48 ㎜) ・ Designed as rapid switching structure for
・ Several surfaces ・ 2 operation handles (H type, R type) excellent contact reliability
(square, Ø25 round, Ø30 round) ・ Ammeter switch (AS), Voltmeter ・ Lock ring applied in the OFF state
・ Switch-board switch A/S, V/S, C/S switch (VS) ・ Handle and contact parts with detachable
standard manufacturing product ・ Small cam switches with several structure (MAS-025)
・ Machine tools and electrical circuit configurations ・ 2 color types of handle and handle guard
Features installation custom circuit (red/yellow and black/white)
configurations for every industry ・ Ø22, Ø30 (MAS-025), 4 holes fixed panel
● HY-MRK Features mounting
・ Handle lock function by key lock ・ Clear indication of ON/OFF contact status
・ Rated current 20 A, high capacity (turning OFF the operation handle will block
cam switches/custom circuit all contacts)
configuration

Rated insulation
600 V 690 V a.c.
voltage
16A-24 V a.c., 8A-48 V a.c.,
Rated current 10 A 5A-110 V a.c., 3A-220 V a.c., Rated insulation
690 V a.c.
1.8A-380 V a.c. voltage

Dielectric Rated current 25 A, 63 A, 125 A

2,500 V a.c. for 1 min
strength Materials Non-flammable
Page 141 140 Page 140

17
Selection Table

■ Limit Switches
Type Aluminum Die Casting Zinc Die Casting Plastic Case
Model HY-M900 HY-L800 HY-LS800

Appearance

・ Solid die casting case and 2 circuits double ・ Zinc die casting body and plastic cover ・ Compact size and lightweight with the
micro switch built-in structure plastic case
・ High mechanical intensity with the heat ・ 4 actuator types provide wide selection ・ The plastic case is safe against electric
Features resistant, oil proof and dust protection possibilities leakage
structure ・ Applicable to machine tools, transportation ・ 6 actuator types provide wide selection
・ Check the operation state on the outside machines, assembling lines and several possibilities
with the operation indicator industrial machines

Open/close Mechanical: 120 times/min,

Mechanical: 120 times/min, electrical: 30 times/min
frequency electrical: 20 times/min
Insulation
Min. 100 ㏁ (500Vd.c.)
resistance
Among terminals : 1000 V a.c. 50/60 ㎐ Among terminals : 1500 V a.c. 50/60 ㎐
Dielectric for 1 min, for 1 min, 1,000 V a.c. 50/60 ㎐ for 1 min,
strength Among unfilled metal parts : 1500 V a.c. Among unfilled metal parts : 2000 V a.c. 2,000 V a.c. 50/60 ㎐ for 1 min
50/60 ㎐ for 1 min 50/60 ㎐ for 1 min
Page 142 143

■ Micro Switches
Type Micro Switches
Model HY-700 ZCN-500

Appearance

・ Certain operation and long life with the snap action tool ・ Certain operation and long life with the beryllium copper and running
・ Excellent repetitive accuracy and 10 A open/close capacity spring to the strong chemically resistant resin case.
Features ・ Standard type, installation hole gap: 25.4 mm, fixed with M4 bolt ・ Compact, lightweight, with strong mechanical durability
・ 9 actuator types provide wide selection possibilities ・ 9 Actuator types provide wide selection possibilities
・ Terminal protective cover (optional)

Open/close
Mechanical: 120 times/min, Electrical:20 times/min
frequency
Insulation
Min.100 ㏁ (500 V d.c.)
resistance
Rated current 10 A 250 V a.c.
Page 144 143

■ Foot Switches ■ Mono Lever Switches ■ Pendant Switches

Type Foot Switches Type Mono Lever Switches Type Pendant Switches
Model HY-100 Model LEL/LES Model HY-P series

NEW
Appearance
Appearance Appearance

・ 4-direction switches that can

operate 4 directions in a single
lever ・ Easy wiring and operation with the
・ High mechanical safety with
・ The lever tilting direction wire holder bending structure (15°)
the aluminum case
minimizes malfunctions during ・ Solidity improved with the thicker
・ Micro switch with excellent
use and it is suitable for high impact ABS resin, and anti-slip
electrical reliability built-in
Features products that are frequently structure
・ Protective cover from falling
switched in direction. Features ・ The wide internal wiring space
Features materials and safety latch lever
・ There are auto returning, makes wiring easier and more
attached . (HY-104)
manual returning and mixed convenient
・ Cable locker applied
types depending on lever ・ Several new features on-demand
(HY-103, 104)
operation type. (LED, volume, toggle switch).
・ Cost-effective plastic case
(HY-101)
Rated insulation Degree of IP-65 (IEC 60529)
Rated current 10 A 250 V a.c. 600 V protection (emergency switch type included)
voltage
Foot switch Rated electric Case : high impact ABS,
Plastic, aluminum 3 A 250 V a.c. Materials
materials current Contacts : AgSnO2
Contact C Contact Dielectric Insulation
2,500 V a.c. for 1 min Min. 100 ㏁ (500 V d.c.)
structure strength resistance
Page 145 Page 145 Page 146

18
 Selection Table

■ Sign Towers
Type Ø25 Modular LED Sign Towers Ø60 Modular LED Sign Towers Ø55 Sign Towers
Model STE025 STE060 HY-TN

Appearance

・ Ø25 column type, suitable installation ・ Long life with the high brightness LED light ・ Ø55 round type
structure for small machines and narrow source ・ 1~5 stacks and 5 color types
spaces ・ Simple structure from 1 to 5 stacks ・ Incandescent bulb type
Feature ・ Long life with high brightness LED light source ・ Several mounting supporters
・ 1~3 stacks and 3 color types ・ Convenient configuration (number of stacks
・ Easy installation with pipe direct installation and colors) with the modular type
structure

Function Continuous light only Continuous light, continuous light/flashing/buzzer (selection by external signal)
Diameter Ø25 Ø60 Ø55
Plastic round supporter, L type bracket,
Plastic round supporter, L type bracket,
Supporter L type bracket (sold separately) elbow type supporter (optional),
elbow type supporter (optional)
Plastic supporter with pipe connection
Rated voltage 24 V d.c. 24 V d.c., 100-240 V a.c. 50/60 ㎐ 24 V d.c., 220 V a.c. 50/60 Hz
Number of
1~3 stacks (red, green, yellow) 1~5 stacks (red, green, yellow, blue, white)
stacks & colors
Page 153 152 151

Type Ø40, Ø60, Ø80 LED Sign Towers Ø25, Ø40, Ø60, Ø80 LED Sign Towers
Model STS STL

Appearance

・ Several sizes (Ø40, Ø60, Ø80) ・ Several sizes (Ø25,Ø40, Ø60, Ø80)
・ Long life with the high brightness LED light source ・ 1~5 stacks and 5 color types
Features ・ 1~5 stacks and 5 color types ・ Convenient installation with the aluminium pipe
・ 3 installation types direct installation structure

Function Continuous light only Continuous light/flashing/buzzer models (selection by external signal)
Diameter Ø40, Ø60, Ø80 Ø25 Ø40, Ø60, Ø80
Plastic round supporter, L type bracket, Plastic round supporter, L type bracket,
Supporter
elbow type supporter (optional) elbow type supporter (optional)
24 V a.c. 50/60 Hz or 24 V d.c.,
Rated voltage 24 V d.c., 24 V a.c. 50/60 Hz or 24 V d.c., 100-240 V a.c. 50/60 ㎐
12 V a.c. 50/60 Hz or 12 V d.c. (Order-made)
Number of
1~5 stacks (red, green, yellow, blue, white)
stacks & colors
Page 149 150

■ Indicating Lights ■ Panel lamp

Type LED Wall Mounted Lights Type LED Basic Panel Lamp
Model WME WMS Model HL

NEW

Appearance Appearance

・ 3-color slim type, suitable for wall ・ 1~5 stacks, suitable for wall mounting ・ Easy to install in tight spaces
mounting ・ Long life with the high brightness LED ・ Protection from obstruction through an
・ Long life with the high brightness LED light source internal protection circuit.
light source ・ 2 types of buzzer melodies (single ・ Improved cost-effectiveness through
Features ・ 2 body type: beige or chrome plated melody/beeping) non-insulated SMPS methods
Features
・ Continuous light, flashing light, ・ Continuous light, flashing light ・ High Efficiency LED Recruitment
2-melody buzzer built-in ・ Degree of protection IP54 (IEC 60529) (using LG Innotec G3 series LEDs)
・ Degree of protection IP54 (IEC 60529)

Rated voltage 24 V a.c. 50/60 Hz or 24 V d.c., 12 V a.c. 50/60Hz or 12 V d.c. (Order-made)

Functions Continuous light ・ flashing ・ buzzers Rated voltage 220 V a.c.
Number of 3 Tires 1~5 Tires Number of
Light Color
stacks and colors Red, Green, Yellow Red, Green, Yellow, Blue, White stacks and colors
Page 154 Page 153

19
Selection Table

■ Turn Lights
Type Signal Lights (Xenon) Ø84 LED Signal Lights Ø70 LED Signal Lights
Model RLA-WX/WXB LT SLB

Appearance

・ Ø118 Rotating continuous light only, rotating ・ Rotational flickering function by the sequential ・ Continuous light, flashing light, buzzer
continuous light and buzzers built-in flashing (selection by external signal)
・ Excellent instant light emitting and high ・ Long life with the high brightness LED light ・ Long life with the high brightness LED light
brightness source source
・ Less current consumption compares to the ・ Ø84 round cap, direct or supporter mounting ・ Select Ø70 round type cap, rectangular type
Features rotating light and 4 times longer life ・ Acrylic cap for excellent visible light cap, direct installation, supporter mounting
expectancy compared to the regular lamp transmittance installation
・ Simple attaching/detaching due to the ・ Solid and smart design ・ Cost-effective, simple installation structure
permanent magnet attachment type (for cars) ・ Degree of protection IP54 (IEC 60529) ・ Solid polycarbonate protective cap
・ Degree of protection IP54 (IEC 60529) ・ Degree of protection IP54 (IEC 60529)

Diameter Ø118 Ø84 Ø70

12 V a.c. 50/60Hz or 12 V d.c.,
110 V a.c. 50/60 Hz, 220 V a.c. 50/60 Hz, 12–24 V a.c. 50/60 Hz, 110/220 V a.c.
Rated voltage 24 V a.c. 50/60 Hz or 24 V d.c.,
12 V d.c., 24 V d.c. 50/60 Hz, 12–48 V d.c.
110-240 V a.c. 50/60 Hz
Rotating continuous light ・ Flashing ・ Lit, flashing, buzzer
Functions Rotating continuous light ・ buzzers
Buzzer buil-in (selected by external input signal)
Colors Red, blue, white Red, yellow, green, blue Red, yellow, green
Page 156 157

■ Warning Lights
Type Ø60 / Ø84 / Ø100 / Ø150 Revolving Warning Lights
T060 / T084 T060 / T084
Model T060 / T084 T060 / T084 T060 / T084 / T100 T060 / T084 / T100
T100 / T150 T100 / T150

NEW
Appearance

・ Ø60 / Ø84 / Ø100 / Ø150 Rotating continuous light, rotating continuous light and buzzers
・ High luminance LED light source bright and long life
・ Several supporter mounting type
Features ・ Cost-effective, simple installation structure
・ Solid polycarbonate protective cap
・ Rotational structure with the excellent abrasion resistive acetal gear
・ Degree of protection IP54

Diameter Ø60, Ø84, Ø100, Ø150

● 12 V d.c. : 0.09 A, ● 24 V d.c. : 0.07 A,
Rated voltage ● 12 V d.c. : 0.08 A, ● 24 V d.c. : 0.06 A, ● 110 - 220 V a.c. : 0.03 A
● 110 - 220 V a.c. : 0.04 A
Functions Rotating continuous light ・ buzzers
Colors Red, Yellow, Green, Blue
Page 155

■ Buzzers
Type Power Buzzers 4-Tone Buzzers 3-Tone Electronic Buzzers
Model HY-256/306/606/606N HY-606MD/MA HY-226M/256M

Appearance

・ Compact size, lightweight, high capacity ・ Compact, light weight, high capacity tones ・ Compact, lightweight, with 3 melodies
buzzer melody ・ Low Power consumption and long life ・ Front LED illuminates during buzzer operation
Features ・ Excellent alarm function expectancy ・ Simple installation structure with the panel
・ Suitable for panel installation ・ Simple installation structure with the panel installation type
・ Low Power consumption installation type ・ Low Power consumption

110 V a.c. 50/60 Hz, 220 V a.c. 50/60 Hz, 110 V a.c. 50/60Hz,220 V a.c. 50/60 Hz
Rated voltage 100-240 V a.c. 50/60 Hz, 12 V d.c., 24 V d.c.
12 V d.c., 24 V d.c. 12d.c., 24 V d.c.,
Power
4 VA, 8 VA, 30 mA 2.5 W 0.6 W, 13.5 W
consumption
Volume
85 dB max 98 dB max 80 dB max
(1 m distance)
Page 158

20
 Selection Table

■ Terminal Blocks
Type Assembly Terminal Blocks Fixing Type Terminal Blocks
Model HYBT-15A2 HYTM HYT

NEW NEW
Appearance

・ DIN rail installation structure ・ New design (simple and robust image) ・ Several polarities for each current capacity,
・ Possible to assemble the terminal block ・ Contact protective structure for the terminal easy selection
with different capacity to the same fixing plate block live parts ・ Body made of phenolic resin (60 - 500 A) and
・ Excellent attaching / detaching of terminal ・ O-type and Y-type crimp terminal use more ABS flame retardant resin (10 - 30 A)
at the temporal position convenient with the screw self-up structure ・ Because the bolt and plate underwent heat
Features ・ Din Rail one-touch assemblable and detachable treatment and rust-proof treatment, it
structure (using slotted screwdriver during has excellent electrical and mechanical
removal) characteristics
・ Standard product of rated current
・ Simple installation

Rated insulation
600 V
voltage
10 A, 20 A, 30 A, 60 A, 100 A, 150 A,
Rated current 15 A 15 A, 25 A, 35 A, 60 A, 100 A
200 A,300 A, 400 A, 500 A
Insulation
Min. 100 ㏁ (between each charging part and between each charging part and mounting metal plate)
resistance
Page 159 161

■ Fuse Holders ■ Cable Connectors ■ Control Boxes

Type Fuse Holders Type Cable Connectors Type Rolled Steel Control Boxes
Model HY-F15/HY-F30 Model HYC-M1/HYC-M2 Model HY-25/HY-30

UPGRADE
Appearance Appearance Appearance

● HY-F15 series ・ Applied as waterproof and ・ Rolled iron and ivory color
・ LED continuous light indication during spinning-proof when extending enamel painted
fuse disconnection / safety cover the cable from many machine ・ Several operating switches
installation structure tools attached (Ø25 and Ø30)
・ DIN rail and bolt fixing structure / ・ PF 1/2 cover fixing type nut ・ Several specifications
Easy installation by 1P, 2P, 3P ・ Nut tightening structure by the (1 ~ 6 holes)
individual products seal rubber and stuffing washer
Features ● HY-F30 series
・ Body materials are made of NYLON66 Features Features
with glass fiber and have excellent
electrical insulation, strong against
impact and heat
・ The fuse comes out when replacing it,
which provides excellent safety

Rated 250 V a.c. 15 A, 24 V d.c.10 A,

current 600 V a.c. 30 A
110-220 V a.c., 12-24 V d.c., Materials PC (Resin) Materials Rolled steel
Remarks
110-600 V a.c. Remarks Ø8, Ø11 Remarks Ø25, Ø30
Page 162 Page 162 Page 162

21
 TEMPERATURE CONTROLLER

VX series
Specifications
NEW

Model VX9 VX2 VX7 VX4

Appearance

W×H×D(㎜) 96.0 × 96.0 × 63.0 48.0 × 96.0 × 63.0 72.0 × 72.0 × 63.0 48.0 × 48.0 × 63.0
Thermocouple K, J, E, T, R, B, S, L, N, U, W, PLII
Reference junction compensation ±1.5 ℃ (within -10 ~ 50 ℃)
accuracy
Input RTD JPT100, PT100
Allowable line resistance Each 3 wire within 10 Ω (However, the resistance between the three lines shall be the same.)
DC voltage / current 1 ~ 5 V (4 ~ 20 mA), 5 V (0 ~ 20 mA), 0 ~ 10 V, 0 ~ 50 mV, 0 ~ 100 mV
Sampling cycle 50 ms
● Rated switching capacity : 5A 250 V a.c., 5 A 30 V d.c. ● Max. switching power : 750 VA, 90 W
Relay output ● Max. switching voltage : 250 V a.c., 110 V d.c. ● Max. switching current : 5 A
Control
● Mechanical life : 2 million times (at 180 CPM)
output
SSR output 12 V d.c. ± 1 V d.c. pulse voltage (Load resistance min. 600 Ω)
SCR output 4 ~ 20 mA ±0.2 % of FS ±1 digit, Load resistance min. 600 Ω
Control type ON/OFF, PID control, 2DOF PID control
Control
Output operation Reverse action, direct action
● EEPROM unlocked : when setting E2P.L: OFF in G.SET group - EEPROM life: 1 million times write guaranteed,
Memory Non-volatile memory life
● EEPROM lock setting: when setting E2P.L: ON in G.SET group - store in RAM
Display Display method Wide viewing angle LCD
Communication method USB 2.0
USB
Protocol • Protocol : PC-LINK •Baudrate : 38400 bps •Start bit : 1 bit •Data bit : 8bit •Parity bit : None • Stop bit : 1bit
Loader
Communication distance Max.5 m
Auxiliary Output Relay 1 to 4 points, rated switching capacity : 5A 250 V a.c., 5 A 30 V d.c.
2 or 4 points
DI ● Enter the junction: ON: 1 K￡ or less, OFF: 100 KΩ or higher ● Enter contactless point: ON: 1.5 V max., OFF: 0.1 mA max.
● Outflow current: approximately 2 mA per input ● Open state voltage: approximately 5 V d.c.
Transmission Output 1 point, 4 to 20 mA ±0.2% of FS ±1 digit, load resistance: not more than 600 Ω
Remote input 1 contact, 4 ~ 20 mA (1 ~ 5 V)
Current input 1 contact or 2 contacts, 0.0 - 50.0 A, CT-70 Current Detector (Salar Sale)
Option Communication method EIA RS485 standard, 2-wire half-duplex
Max. connections 31 (Address setting 1~99 available)
Communication sequence No sequence
Communication distance Within 1.2 ㎞
RS-485
Communication speed 4800, 9600, 14400, 19200, 38400, 57600 BPS
Bit ● Start bit : 1 bit ● Data bit : 7 or 8 bit ● Parity bit : NONE / EVEN / ODD ● Stop bit : 1 or 2 bit
Protocol PC-LINK STD, PC-LINK WITH SUM, MODBUS-ASCII, MODBUS-RTU
Response time Actual response time = handling time + (response time X 25 ㎳)
AC Power-On Voltage 100-240 V a.c. 50/60 Hz
DC ower-On Voltage 24 V d.c., Class2
Voltage fluctuation rate ±10 % of power voltage
Insulation Resistance Min. 20 ㏁, 500 V d.c.
Voltage Resistance 3,000 V a.c. 50/60 Hz 1 minute (between primary and secondary terminals)
Power AC Voltage-type power
9.0 VA or less 8.5 VA or less 8.5 VA or less 8.5 VA or less
consumption
DC Voltage-type power
3 2 W or less 2 7 W or less 2 8 W or less 2 W or less
consumption
Ambient temperature & humidity -10 ~ 50 ℃, 35 ~ 85 % RH (without condensation)
Storage temperature -25 ~ 65 ℃

Ambient
• ● Electrostatic Discharge(ESD) : KN61000-4-2 •● EFT(RS) : KN61000-4-3 •
● Conductive RF(CS) : KN61000-4-6 • ● SURGE : KN61000-4-5
IP65 (The front part) IP65 (The front part) IP65 (The front part) IP66 (The front part)
Weight (g)
290 202 194 120
Components BODY, FIXED BRACKET, RESISTANCE 250 Ω (1%), RUBBER PACKING, HANDLING INSTRUCTIONS

22
 Temperatrue controllers
Suffix code
Model Code Content
VX ˩- ˩ ˩ ˩ ˩ - ˩ ˩ ˩ ˩ ˩ ˩ LCD Digital Temperature Controller
2 48(W) × 96(H) × 63(D) ㎜
New
4 48(W) × 48(H) × 63(D) ㎜ product
Size
7 72(W) × 72(H) × 63(D) ㎜
9 96(W) × 96(H) × 63(D) ㎜ High
function
Sensor U Universal input
M Relay
OUT 1 Programmable
S SSR Temperature
(Control Output 1) Humidity
C SCR
N None ※ *1) You cannot select from VX4. However, if OUT2=M is
OUT 2 Thermal
selected, SUB3 is available depending on the setting of the shock
(Control Output 2) M Relay Test control
parameter.
A 100-240 V a.c. 50/60 Hz
Power ※ *2) You can select from VX2, 7, 9 (VX4 is excluded)
D 24 V d.c., Class2 Multi-
※ The orderable name configuration of the VX is available in channel
A1 Relay 1 (VX4 standard) the User's Guide, Catalog, Please refer to our website.
A2 Relay 2 (VX2, VX7, VX9 standard) ※ Separate Economy
Sub output Ignorance
A3 Relay 3 (※ *1,*2) - Current Detector: CT-70 For freezer
A4 Relay 4 (※ *2) - USB Loader Cable: NMC-UM210
None - Terminal Protection Cover
Indicator
Communication
C RS-485 VX2 VX4 VX7 VX9
None
Retransmission output (RET) TC2A-COV TC4A-COV TC7A-COV TC9A-COV
T 4 ~ 20 mA
None
Digital Input (DI) D2 2 Contacts (DI 1 ~ 2)
D4 4 Contacts (DI 1 ~ 4)
None
Current Detection Input (CT) H1 CT 1
H2 CT 2
None
Remote input (REM)
R 4 ~ 20 mA (1 - 5 V)

Input Type INP Parameters and Input Sensor Type and Range
● Thermocouple and side temperature resistor
Parameter Settings Temperature range
Classification kind Error
Display Communication ℃ ℉
K0 1 -200 ~ 1370 -328 ~ 2498
K
K1 2 -100.0 ~ 500.0 -148 ~ 932
J0 3 -200 ~ 1200 -328 ~ 2192
J
J1 4 -199.9 ~ 900.0 -328 ~ 1652 ±0.2 % of FS ± 1 digit
E E1 5 -199.9 ~ 900.0 -328 ~ 1652
T T1 6 -199.9 ~ 400.0 -328 ~ 752
THERMO R R0 7 0 ~ 1700 32 ~ 3092
COUPLE B B0 8 100 ~ 1800 212 ~ 3272 ±0.2 % of FS ± 1 digit 100~200 ℃ : ±2.0 % of FS ± 1 digit
S S0 9 0 ~ 1700 32 ~ 3092
L L1 10 -199.9 ~ 900.0 -328 ~ 1652
N N0 11 -200 ~ 1300 -328 ~ 2372
±0.2 % of FS ± 1 digit
U U1 12 -199.9 ~ 400.0 -328 ~ 752
W W0 13 0 ~ 2300 32 ~ 4172
PLII PL0 14 0 ~ 1300 32 ~ 2372
JPt0 20 -200 ~ 500 -328 ~ 932
JPt100
JPt1 21 -199.9 ~ 500.0 -328 ~ 932
RTD ±0.2 % of FS ± 1 digit
Pt0 22 -200 ~ 640 -328 ~ 1184
Pt100
Pt1 23 -199.9 ~ 640.0 -328 ~ 1184

● DC Current and Voltage

Parameter Settings
Classification kind Range Error
Display Communication
4 ~ 20 mA (※) 1-5 V 30
Current Input
0 ~ 20 mA (※) 5V 31
1~5V 1-5 V 30
0~5V 5V 31 -1999 ~ 9999 ±0.2 % of FS ± 1 digit
VDC / ㎷DC 0 ~ 10 V 10 V 32
0 ~ 50 mV 0.05 V 33
0 ~ 100 mV 0.1 V 34
※ If direct current is used, it is recommended to use a 250 Ω (high precision of 0.1%) resistor connected in parallel to the outside of the
terminal. The 250 Ω (1%) resistance enclosed in the product is not a precise resistance, so please be aware of the use.

23
 TEMPERATURE CONTROLLER
Connectivity
● VX2 ● VX4 ● VX7

 4$3  % *  " 
  " 
 %*  46#  4$3  % *  " 

4$3
065 443 34 065 3-: 065 443 $ 5  34
 3-:  $0. # 
 443 34  3-: $0.  $0. # 

 3-: # 
 $0.  46# $5
  %*  3-:   %* 
065   %*  $0. 065 3-:
3-:
   065 3-: 3&.   
%* 46# %*
$5 #ˏ 3&.
  %* 
46#   $0.  $0. $5 5$ N" 46#   $0. 
3-: $5 7 3-: 3&5
%*   $0. $0.  46#   %* 
46#    #
3-: 3&5 $5 35% 3-:
%* #ˏ
$0.     4FF   $0 .   46# 
3&5 .BOVBM " 3-: 5$ N"
7
46#      46# 
# 35%
3-: 3&. 3-:
4FF
 .BOVBM  $0 . 
46#    "
3-: #ˏ
$0.    N"
5$ 7
  
4FF #
35%
 .BOVBM  
" ※ Use the following geometry for terminals. ■ Racket Assembly Diagram
6OJUNN ● VX4 ● VX2, VX7, VX9
● VX9

 4$3  % *  " 

065 443 34



 3-:  $0. # 


  %* 
065 3-: 3JOH5FSNJOBM
  %* 
$5
46#   $0.  $0.
3-: $5
%*



46#   
3-:
$0.   
3&5
46#    6TIBQFE5FSNJOBM
3-: 3&.
46#   
3-: #ˏ
$0.    N"
5$ 7
  
4FF #
35%
 .BOVBM  
"

Separate Appearance dimensions and panel processing dimensions

■ USB Loader Cable ■ Product Appearance Dimensions 6OJUNN
(NMC-UM210, ※Separate)
※ USB2.0 Mini 5PIN Cable 8
-
8 % %
)

) )
#

■ Current Detector (CT-70, ※Separate)

※ HBAEnable in Options
(Current ratio 1000 : 1, Current detection range 0.0 - 50.0 A)

"

Sortation Display VX2 VX4 VX7 VX9

W 48.0 48.0 72.0 96.0

H 96.0 48.0 72.0 96.0

Product
6OJUNN D 63.0 63.0 63.0 63.0
appearance
D1 5.5 5.0 5.5 5.5

■ Protective Cover Dimensions ( ※Separately) L 78.4 78.4 78.4 78.4

W1 ＊1) 45.0 45.0 69.0 93.0

8 %
H1 ＊1) 93.0 45.0 69.0 93.0
panel processing
A 70.0 60.0 83.0 117.0

B ＊2) 122.0 60.0 100.0 117.0

)
W2 48.4 48.0 71.8 96.0

Protection Cover H2 94.4 48.1 71.8 96.0

D2 26.9 24.0 26.9 26.9

VX2 VX4 VX7 VX9

＊1) +0.5 mm Apply Tolerance
TC2A-COV TC4A-COV TC7A-COV TC9A-COV ＊2) Apply 100.0 mm when using USB loader cable on VX4

24
 Temperatrue controllers

AX series
Specifications New
product
Model AX9 AX2 AX7 AX3 AX4
High
function

Appearance Programmable
Temperature
Humidity

Thermal
shock
W×H×D(㎜) 96.0×96.0×63.0 48.0×96.0×63.0 72.0×72.0×63.0 96.0×48.0×63.0 48.0×48.0×63.0 Test control

Input type Multi input (Selection by internal parameters), (RTD :Pt 100 Ω, IEC 751)
Multi-
Sampling cycle 100 ㎳ channel
Input impedance Max. 1 ㏁
Allowable input voltage 10Vd.c. max Economy
Ignorance
Accuracy ±0.3 % of FS ±1 digit (in case of R type, ±1.0 % of FS ± 1 digit in the 0 ~ 600 ℃ range) For freezer

Display 7 Segment LED (PV : Red, SV : green)

Front size PV 22.5×11.2 14.5×7.0 14.5×7.0 15.9×7.6 13.0×6.5 Indicator

(㎜) SV 18.7×9.3 10.8×5.2 9.4×4.7 12.0×6.0 9.2×5.2

Insulation Resistance Min. 20 ㏁, 500 V d.c for 1 min (between 1st and 2nd terminal)
Dielectric strength 2300 V a.c. 50/60 ㎐ for 1 min (between 1st and 2nd terminal)
Control type PID control (PID control by auto-tuning), ON/OFF control, P control
Control output operation Direct action / reverse action (selection by parameter setting)
1 A contact, 3 A 240 V a.c. 3 A 30 V d.c. (resisitive load)
Relay output (RLY 1)
But the relay control output can be set as alarm output when not in use.
Control Time-division
Voltage proportional control
output output 12 - 15 V d.c. pulse voltage (load resistance min. 600 Ω)
type (CYC)
(SSR)
Phase control (PHA)
Current output (SCR) 4 - 20 ㎃ d.c. (load resistance max. 600 Ω)
Power voltage 100 - 240 V a.c. 50/60 ㎐ (10 % of power voltage)
Voltage fluctuation rate ±10% of power voltage
Power consumption Max. 5.5 VA
Ambient temperature & humidity - 5 ~ 50 ℃, 35 ~ 85 % RH (Without condensation)
Weight (g) 400 320 300 320 180

Suffix code
Model Code Content
AX □- □ □ Multi Input Digital Temperature Controller
2 48(W) X 96(H) ㎜
3 96(W) X 48(H) ㎜
Appearance 4 48(W) X 48(H) ㎜
7 72(W) X 72(H) ㎜
9 96(W) X 96(H) ㎜
1 Relay 1 + Relay 2+SSR When using relay or SSR output
2 Relay 1 + Relay 2 + Relay 3 + SSR (internal selection by parameter)
1B SSR + Relay 1(form C) + Relay 2
Option Only AX2, 3, 7, 9
2B SSR + Relay 1(form C) + Relay 2 + Relay 3
3 4 - 20 ㎃ + Relay 2
When using current output
4 4 - 20 ㎃ + Relay 2 + Relay 3
Power A 100-240 V a.c. 50/60 ㎐
※ The relay output operates as control output, alarm output and LBA output depending on the internal parameter settings.

Range and Input Type

Range
Sortation Symbol Input
℃ ℉
- 100 ~ 1200 -148 ~ 2192
K
-100.0 ~ 500.0 -148 ~ 932
TC J -100.0 ~ 500.0 -148 ~ 932
R 0 ~ 1700 32 ~ 3092
T -100.0 ~ 400.0 -148 ~ 752
RTD Pt100 Ω -100.0 ~ 400.0 -148.0 ~ 752.0

25
 TEMPERATURE CONTROLLER

NX series
Specifications
Model NX9 NX2 NX7 NX3 NX4 NX1

Appearance

W×H×D(㎜) 96.0×96.0×100.0 48.0×96.0×100.0 72.0×72.0×100.0 96.0×48.0×100.0 48.0×48.0×100.0 48.0×24.0×100.0

Thermocouple input K, J, E, T, R, B, S, L, N, U, W, PL2
RTD input Pt 100Ω, KPt 100Ω
DC voltage input 1-5 V d.c., -10-20 ㎷ d.c, 0-100 ㎷ d.c., 4-20 ㎃ d.c. (Attach 250 Ω external resistor)
Input sampling cycle 250 ㎳
Input display resolution Basically, below the measuring range decimal point
Input impedance ・Thermocouple and DC voltage input (㎷): min. 1 ㏁, ・DC voltage input (V): approx. 1 ㏁
Allowable signal source
・Thermocouple : max. 250 Ω ・DC voltage : max. 2 ㏀
Input resistance
Lead wire allowable resistance RTD (max. 10 Ω. but the resistance among 3 lines should be same)
Allowable input voltage Within ±10 V (thermocouple,RTD,DC voltage (㎷)), within ±20 V (DC voltage (V))
Scaling -1999 ~ 9999 (SL-L ~ SL-H Range)
Input correction -100.0 % ~ 100.0 % of FS
Reference contact
±1.5 ℃ (15 ~ 35 ℃ Range), ±2.0 ℃ (0 ~ 50 ℃ Range)
compensation error
・Thermocouple: Select OFF, UP/DOWN Scale ・Side temperature resistance: UP Scale
Input disconnection detection
(Current detected during thermocouple and side temperature resistance BURN-OUT: about 50 nA)
±0.5 % of FS ±1 Digit, thermocouple (K, J, E, T, R, B, S, L, U, W, PL2)
Display accuracy ±1.0 % of FS ±1 Digit, thermocouple (N)
±0.5 % of FS ±1 Digit, RTD (KPt100 Ω, Pt100 Ω), DC voltage
External power supply 12 V d.c., 20 ㎃ max. (Cannot be used when using retransmission output)
・1 Blocker to 2 Blocker: 500 V d.c. 20 ㏁ or higher
Performance
Insulation Resistance ・1 Blocker to GROUND: 500 V d.c. 20 ㏁ or higher
・2 Blocker to GROUND: 500 V d.c. 20 ㏁ or higher
・1 Blocker to 2 Blocker : 2,300 V a.c. 50/60Hz for a minute
Dielectric strength ・1 Blocker to GROUND : 2,300 V a.c. 50/60Hz for a minute
・2Blocker to F and G : 1,500 V a.c. 50/60Hz for a minute
Communication method RS-422 (4-wire), RS-485 (2-wire)
Protocol PC Link STB, PC Link with Checksum, MODBUS (RTU), MODBUS (ASCII)
Communication Communication speed 2400, 4800, 9600, 14400, 19200 BPS
(Optional) Max. number of
31 (Address setting 1 ~ 99)
connections
Communication distance Max. 1.2 km (total length)
Control method PID auto-tuning
a) reverse operation (heating) / forward operation (cooling) arbitrary selection (by parameter setting
Control operation
b) simultaneous heating / cooling control
Setting Range Refer to range and input code
Contact input (DI) Select among 3 preset temperatures with external contact
Auto-tuning 2 types Select target value / low target value auto-tuning
Proportional band 0.1 ~ 999.9 % (Heating / Cooling type : 0.0 ~ 999.9 %)
Control Integral time OFF, 1 ~ 6,000 sec
functions and
Differential time OFF, 1 ~ 6,000 sec
output
ARW(Anti Reset Wind-up) Auto, 50.0 ~ 200.0 % (Proportional band)
ON / OFF control Select output type by parameter
PID selection Zone PID / Group PID selection
Manual reset Manual reset can be set when Integral time is OFF
Output amount at input
-5.0 ~ 105.0(Normal type), 0.0 ~ 105.0 %(Heating / cooling type)
disconnection (OUT1)
Output amount at input
0.0 ~ 105.0 %
disconnection (OUT2)
Power voltage 100-240 V a.c. (±10% of power voltage) 24 V a.c. / Vd.c.
Power consumption Up to 6.0 W, 10 VA or less, 8 VA (NX1)
Ambient temperature & humidity 0 ~ 50 ℃, 35 ~ 85 % RH (without condensation)
Storage temperature -25 ~ 70 ℃
Weight(g) 472 342 344 340 342 94

26
 Temperatrue controllers
Suffix code (NX2, 3, 4, 7, 9)
Model Code Content
NX □- □ □ □ Multi Input/Output Temperature Controller
2 48(W) X 96(H) ㎜
New
3 96(W) X 48(H) ㎜ product
Appearance 4 48(W) X 48(H) ㎜
7 72(W) X 72(H) ㎜
High
9 96(W) X 96(H) ㎜ function
0 Normal type (heating control)
Control type 1 Heating / cooling control (simultaneous) Programmable
Temperature
2 Heating / cooling control (NX4-20 only) Humidity
0 -
NX9 Option
1 RS485, HBA Thermal
shock
0 - Test control
NX7 Option 1 RS485, HBA
2 SV2, SV3, HBA Multi-
channel
0 SV2, SV3
NX2, 3 Option 1 HBA
Economy
2 RS485 Ignorance
0 - For freezer

1 HBA, AL2
Note.
2 SV2, SV3 Indicator
1: OUT1 (terminal ①-②-③) is applied as AL1
3 RET, RS485
NX4-0 Option However, when selecting control output SSR/SCR6 :
4 RS485
OUT1 (terminal ⑥-⑦) applies as SV2
5 AL1, AL2
However, if relay control output
6 AL1, AL2, SV2
7 RS485, HBA
0 -
NX4-1 Option OUT2 (Terminal ⑪-⑫) applies as SSR/SCR
4 RS485
NX4-2 Option 0 AL1 OUT2 (Terminal ⑪-⑫) applies as RLY
100-240 V a.c. 50/60 Hz
Power voltage
D 24 V d.c.

Suffix code (NX1) (Note) NX1-1□ products can select control outputs 6, 9, 10, and 11 outputs.
Model Code Content
NX1- □ □ □
Multi Input/Output Temperature Controller 48(W) X 24(H) ㎜
0 General type
Control type
1 Heating/cooling control (simultaneous)
Option Terminal number ④, ⑤ Terminal number ⑥, ⑦ Output Selection Initial Value
0 RET RET OUT1(RLY) 3
1 - OUT1(SSR/SCR) - 1
General type
2 RS485/RET RET OUT1(RLY) 3
Option
3 RS485 OUT1(SSR/SCR) - 1
4 ALM OUT1(SSR/SCR) ALM 1
5 RS485/ALM OUT1(SSR/SCR) ALM 1
0 - OUT2(SSR/SCR) OUT1(RLY) 6
Heating/Cooling
1 - OUT1(SSR/SCR) OUT2(RLY) 10
Option
2 RS485 OUT2(SSR/SCR) OUT1(RLY) 6
100-240 V a.c. 50/60 Hz
Power voltage
D 24 V d.c.
※ OUT1 (Heated Output), OUT2 (Cooled Output), RLY (Relay Output), SSR (Voltage Pulse Output), SCR (Current Output, 4-20mAd.c.), RET (Transmission Output)

Range and Input Type

Model Code Input Range (℃) Degree Relative height
1 K *2 -200 ~ 1370
2 K *2 -199.9 ~ 999.9
3 J *2 -199.9 ~ 999.9 Caution
4 E *2 -199.9 ~ 999.9 ● Measurement Input Wiring
±0.5 % of FS
5 T *2 -199.9 ~ 400.0 - Be sure to disconnect the regulator body and external supply when wiring the
±1 digit
6 R 0 ~ 1700 measurement input lines. There is a risk of electric shock.
Thermocouple(TC) 7 B *1 0 ~ 1800 - Please connect carefully to the polarity of the input. If you connect it incorrectly,
8 S 0 ~ 1700 it causes the cause of the main body failure.
9 L *2 -199.9 ~ 900.0 - Please use SHIELD processed wiring for the input. Also, please ground SHIELD with
1 point.
10 N -200 ~ 1300 ±1.0 % of FS ±1 digit
- Route the measurement input signal between the power circuit and the ground
11 U *2 -199.9 ~ 400.0 circuit if possible.
±0.5 % of FS
12 W 0 ~ 2300 ㆍThe FS shall be measured from the minimum to the maximum of each range
±1 digit
13 PlatinelⅡ 0 ~ 1390 measurable range.
Temperature 20 KSPt100 Ω *3 -199.9 ~ 500.0 ㆍDigit is the minimum display
±0.5 % of FS
resistance 21 Pt100 Ω *3 -199.9 ~ 640.0 *1) 0 ~ 400 ℃ Range: ±10 % of FS ±1 digit
±1 digit
(RTD) 22 Pt100 Ω *3 -200 ~ 640
*2) Below 0 ℃: ±1.0 % of FS ±1 digit
30 1-5 V d.c.
DC Voltage 31 0-10 V d.c. -1999 ~ 9999 *3) 20 →KPt100 Ω (C1603) 21, 22 →Pt100 Ω(IEC751)
(Using scaling ±0.5 % of FS
(V d.c. / ㎷ d.c.) 32 -10-20 ㎷ d.c. *4) When using current input, select code number "30" and attach a 250 Ohm 0.1%
functions ±1 digit
33 0-100 ㎷ d.c. resistance to the input signal terminal.
(SL-H/SL-L))
DC Current 30 4-20 ㎃ d.c. *4
27
 TEMPERATURE CONTROLLER

DX series
Specifications
Model DX9 DX2 DX7 DX3 DX4

Appearance

W×H×D (㎜) 96.0×96.0×100.0 48.0×96.0×100.0 72.0×72.0×100.0 96.0×48.0×100.0 48.0×48.0×100.0

Thermocouple input K, J, R
RTD input Pt 100 Ω
DC voltage input 1-5 V d.c., 0-10 V d.c., 4-20 ㎃ d.c.
Input sampling cycle 250 ㎳
Input display resolution Basically 1 ℃ max. (0.1 ℃ max. on decimal point range)
Input impedance Thermocouple and DC voltage input (㎷) : min. 1 ㏁. DC voltage input (V) : approx. 1 ㏁
Allowable signal source Thermocouple max. 250 Ω, DC voltage max. 2 ㏀
Input resistance
Lead wire allowable resistance RTD max. 10 Ω. (but the resistance among 3 lines should be same)
Allowable input voltage ±20 V d.c. for 1 min
Input correction ±100 % of FS
Input scaling -1999 ~ 9999 (Within SL12 ~ SL13 range, with voltage/current input)
Reference contact ±3.5 ℃ (0 ~ 50 ℃ range)
compensation error
Input disconnection detection UP Scale
Display accuracy ±0.5 % of FS but ± 1% of FS with voltage input
Retransm. output accuracy ±0.2㎃ d.c. (Load resistance max. 600 Ω, output range 3.2 ~ 20.8 ㎃ d.c.)
Performance
Insulation voltage Min. 20 ㏁ (500 V d.c.) between input terminal and power terminal, between power terminal and protective earth terminal (enclosure)
Dielectric strength 2300 V a.c. 50/60 ㎐ for 1 min (between input terminal and power terminal, between power terminal and protective earth terminal)
Control type PID Auto-tuning
Control operation Reverse action (heating) or direct action (cooling), by internal setting (SL9)
Setting range Same as input range chart
Proportional band 0 ~ 100 % of FS
Integral time 0 ~ 3,600 sec
Derivative time 0 ~ 3,600 sec
ARW(Anti Reset Wind-up) Auto(A=0), 0 ~ 100 % of FS
ON/OFF control Setting Proportional band to "0" turns ON/OFF control
Control
functions During ON/OFF control 0~10 % of FS
and output hysteresis
Control loop break alarm (LBA) 1 ~ 7,200 sec (Generally, 2 times the integral time)
Proportional period 1 ~ 100 sec.
Decimal point position 1 ~ 4 (“2” When setting 000.0)
Retransmission output 4-20 ㎃ d.c. (Measured value)
Alarm type High alarm(ALH), low alarm(ALL), high/low within range alarm (deviation setting, absolute setting)
Alarm setting range 0 ~ 100 % of FS

High alarm (ALH) hysteresis set 0 ~ 10 % of FS

Relay output Contact capacity : 1c, 250 V a.c. 5 A (resisitive load)

Voltage output (SSR) Approx. min. 12 V d.c. (load resistance min. 600 Ω)
Current 4 - 20 ㎃ d.c. (load resistance max. 600 Ω). Accuracy: ±0.2 ㎃
Output
Temperature alarm (Relay) ● DX4Alarm output (ALM): high, low alarm, LBA common, 1 a X 1 contact
LBA (Relay) ● High alarm (ALH) : 1 C X 1 contact (but DX7: 1 a X 1 contact) ● Low alarm (ALL) : 1 a X 1 contact 250 V a.c. 5A (resisitive load)
Current output 4 - 20 ㎃ d.c. (load resistance max. 600 Ω), accuracy: ±0.2 ㎃.
Power voltage 100-240 V a.c. 50/60 ㎐, 24 V d.c. (Selection by Suffix code)
Voltage fluctuation rate ±10 % of power voltage
Power consumption 12 VA (100-240 V a.c., 24 V a.c.), 4.5 W (24 V d.c.)
Ambient temperature & humidity 0 ~ 50 ℃, 35 ~ 85 % RH (Without condensation)
Storage temperature -25 ~ 65 ℃
Vibration resistance 10-55 ㎐, 0.76 ㎜, X, Y, Z each direction 2 hours
Shock resistance 300 ㎨ 6 directions each 3 times
Weight (g) 472 342 344 340 342

28
 Temperatrue controllers
Suffix code
Model Code Content
DX □- □ □ □ □ □ □ Digital Temperature Controller

2 48(W) x 96(H) ㎜ New

product
3 96(W) x 48(H) ㎜

Appearance 4 48(W) x 48(H) ㎜ High

function
7 72(W) x 72(H) ㎜
Programmable
9 96(W) x 96(H) ㎜ Temperature
Humidity
K K thermocouple
Thermal
J J thermocouple shock
Test control
R R thermocouple

Input P RTD (Pt 100 Ω) Multi-

channel
V 1-5 V d.c.
Economy
C 4-20 ㎃ d.c. Ignorance
For freezer
F 0-10 V d.c.

M Relay contact output Indicator

Control output C Current output (4-20 ㎃ d.c.)

S SSR (Voltage pulse output, 12 V d.c.)

S Alarm output 1 contact (Model : DX4)

Alarm output
W Alarm output 2 contacts (all models except DX4)

A Retransmission output (4-20㎃ d.c. measured value)

Option
N None (DX4, DX7 No retransmission output)

Control operation R Reverse action (heating control)

※ Selection by SL9 (initial value: R) D Direct action (except cooling)

No display (100-240 V a.c.)

Power voltage
C 24 V a.c. 50/60 Hz or 24 V d.c.

Range and input code chart

Range (℃)
Classification Code Input Accuracy
1℃ (SL2 : X1XX) 0.1℃ (SL2 : X0XX)

0001 K -50 ~ 1,300 -50.0 ~ 999.9

Thermocouple
0101 J -50 ~ 600 -50.0 ~ 600.0
(TC)
0100 R 0 ~ 1700 0.0 ~ 999.9 ±0.5 % of FS

RTD 0011 Pt100 Ω -199 ~ 640 -199.0 ~ 640.0

0000 1-5 V d.c. -1999 ~ 9999

Voltage/Current 0000 4-20 ㎃ d.c. -1999 ~ 9999 Decimal point by SL4 1 % of FS

1111 0-10 V d.c. -1999 ~ 9999

29
 TEMPERATURE CONTROLLER

KX series
Specifications
Model KX9N KX2N KX7N KX3N KX4N KX4S

외형

W×H×D(㎜) 96.0×96.0×100.0 48.0×96.0×100.0 72.0×72.0×100.0 96.0×48.0×100.0 48.0×48.0×100.0 48.0×48.0×87.0

Thermocouple input K, J, E, T, R, B, S, L, N, U, W, PL2
RTD input Pt 100 Ω, KPt 100 Ω
DC voltage input 1-5 V d.c. ( 4-20 ㎃ d.c.), 0-10 V d.c.
Input display resolution Basically, below the range decimal point
Input sampling cycle 250 ㎳
Allowable signal source Max. 250 Ω (Thermocouple input), max. 2 ㏀ (DC voltage input)
Input resistance
Lead wire allowable RTD : max. 10 Ω/1 wire. The resistance between 3 lines should be same
resistance
Allowable input voltage ±20 V d.c. for 1 min
Scaling 0.0 % ~ 100.0 % of FS
Reference contact ±3.5 ℃ (0 ~ 50 ℃ range)
compensation error
Input disconnection Up-scale and output OFF when input is disconnected
function
Display accuracy ± 0.5 % of FS (but, 0 ~ 400 ℃ range of B thermocouple is out of guarantee range). Refer to "range and input code chart"
Performance Insulation Resistance Min. 20 ㏁, 500 V d.c., for 1 min (between 1st and 2nd terminal)
Dielectric strength 2300 V a.c. 50/60 ㎐ for 1 min (between 1st and 2nd terminal)
Setting range Refer to "Range and input code chart"
Control type PID control, ON/OFF control
Proportional band (P) Within input range
Integral time 0 ~ 3600 sec.
Derivative time 0 ~ 3600 sec.
ARW (Anti Reset Wind-up) Within input range
Control loop break alarm (LBA) 0 ~ 7200 sec.
Proportional period 0 ~ 100 sec.
Control output hysteresis 0 ~ 10 % of FS
Control
functions ON/OFF control Set the Proportional band to "0" (0.0)
and output
Alarm type Absolute alarm, deviation alarm (high alarm, low alarm, within range alarm)
Range over display When exceed max. range "0000", when exceed min range "UUUU" flashing
Decimal point function Decimal point position selection by parameter during DC voltage input
Decimal point position selection Decimal point selection during current input and DC voltage (0~3 position)
Input correction value setting -100.0 ~ 100.0 of FS
High or low alarm hysteresis 0 ~ 10 % of FS
High / Low range Limit Within input range
Output operation Direct / reverse action selectable by setting
Scale setting -199 ~ 9999 (High and low scale setting during DC voltage input)
Relay output ● NO : 5 A 250 V a.c., 5 A 30 V d.c. (Resisitive load) ● NC : 3 A 250 V a.c., 1 A 30 V d.c. (Resisitive load)
Control
Voltage output (SSR) Min. 12 V d.c., pulse voltage (load resistance min. 600 Ω)
output
Current output (SCR) 4-20 ㎃ d.c. (Load resistance min. 600 Ω), Accuracy : ±0.2 ㎃
Alarm output Relay output 250 V a.c. 3 A (load resistance) ※ refer to connection diagram(contact), but KX4N: 1A contact, 250 V a.c. 1 A (load resistance)
Retransm.
Current output 4-20 ㎃ d.c. (Load resistance max. 600 Ω), Accuracy: ±0.2 ㎃
output
Power voltage 100-240 V a.c. 50/60 ㎐, 24 V d.c. (KX4S 제외)
Voltage fluctuation rate ±10 % of power voltage
Power consumption 11 VA max. 7 VA max.
Ambient temperature & humidity 0 ~ 50 ℃, 35 ~ 85 % RH (Without condensation)
Weight (packed) 400 320 300 320 180

30
 Temperatrue controllers
Suffix code
Model Code Content
KX □- □ □ □ □ Digital Temperature Controller (Multi Input)

2N 48(W) X 96(H) ㎜ New

product

3N 96(W) X 48(H) ㎜

4N 48(W) X 48(H) ㎜ High

function
Dimensions
7N 72(W) X 72(H) ㎜
Programmable
9N 96(W) X 96(H) ㎜ Temperature
Humidity
4S 48(W) X 48(H) ㎜ For 11 pin sockets (2-stage step function by external contact)
Thermal
M Relay shock
Test control

Control output S SSR (Voltage pulse 12 V d.c.)

Multi-
C SCR (Current 4-20㎃ d.c.) channel

C ※ KX4N, KX4S only ALH, ALL, LBA (1a common output)

Economy
Ignorance
※ KX4S Not selectable For freezer

E KX2N, KX3N, KX9N ALH(1c),ALL(1a)

Indicator
Alarm output KX7N, KX4N (Optional) ALH(1a),ALL(1a)

※ KX4N, KX4S Not selectable

K KX2N, KX3N, KX9N (Optional) ALH(1c),ALL(1a),LBA(1a)

KX7N (Optional) ALH(1a),ALL(1a),LBA(1a)

※ Selectable only in the following models

KX4N-□C Retransmission output (RET)
Retransmission output A
KX2N-□E, KX3N-□E, KX9N-□E 4-20 ㎃ d.c.
(optional) KX2N-□K, KX3N-□K, KX9N-□K

N None

A 100-240 V a.c. 50/60 ㎐

Power voltage
D 24 V d.c. (But KX4S excluded)

* When using 4 - 20 ㎃ input, please attach 250 Ω 0.1% resistor to 1 - 5 V d.c input terminal

Range and Input Type

Range (℃)
Classification Code(SL1) Input type
1 ℃ (SL2 : X1XX) 0.1 ℃ (SL2 : X0XX)
0001 K - 50 ~ 1300 - 50.0 ~ 999.9

0101 J ＊2 - 50 ~ 600 - 50.0 ~ 600.0

1100 E - 199 ~ 999 - 199.9 ~ 999.9

1101 T - 50 ~ 400 - 50 ~ 400.0

0100 R 0 ~ 1700 0.0 ~ 999.9

0110 B ＊1 0 ~ 1800 0.0 ~ 999.9

Thermocouple(TC)
0111 S 0 ~ 1700 0.0 ~ 999.9

1000 L ＊2 - 199 ~ 900 - 199.9 ~ 900.0

1001 N ＊2 - 199 ~ 1300 - 199.9 ~ 999.9

1010 U - 199 ~ 400 - 199.9 ~ 400.0

1011 W(Re5-Re25) 0 ~ 2300 0.0 ~ 999.9

1110 PL2 0 ~ 1300 0.0 ~ 999.9

0010 KPt100 Ω(Old type) - 199 ~ 500 - 199.9 ~ 500.0

RTD
0011 Pt100 Ω(IEC) - 199 ~ 640 - 199.9 ~ 640.0

0000 1-5 V d.c. ＊3

DC Voltage(V d.c.) - 199 ~ 9999 Select Decimal Points by SL4
1111 0-10 V d.c. ＊3

※ K, J, E, T, R, B, S, N : IEC 584. L, U : DIN 43710, W(Re5-Re25) : Hoskins Mfg.Co.USA. Pt100 Ω : IEC 751, KS C1603. (Kpt100 Ω : Rt =139.16 Ω
※ Rt : Resistance value at 100℃).
※ 4 - 20 ￡ When using a current input, attach 250 ￡ 0.1% shunt resistance to both ends of the input terminals in 1-5 V d.c. input mode.
※ Degree : ± 0.5 % of FS
＊1) The 0 to 400℃ range is outside the warranty range
＊2) ±1% of FS in the range below 0℃
＊3) ± 1 % of FS

31
 TEMPERATURE CONTROLLER

TD510
Specifications
Model TD510

Appearance

W×H×D (㎜) 145.0×145.0×33.5

Power voltage 100-240 V a.c. 50/60 ㎐ (Voltage fluctuation rate: ±10 % of power voltage) 30 V A max
● Between 1st and 2nd terminals: Min. 1500 V a.c for 1 min ● between 1st and FG terminals: Min. 1500 V a.c for 1 min
Dielectric strength
● Between 2nd and FG terminals: Min. 1500 V a.c for 1 min
● 2 types of RTD (Pt-100, KPt-100) ±0.1 % of FS ±1 Digit
Input type ● 11 types of thermocouple (K, J, E, T, R, B, S, L, N, U, Wire 5 - 26) ±0.15 % of FS ±1 Digit
● 4 types of DC voltage (-10 - 20 ㎷, 0 - 100 ㎷, 1 - 5 V, 0 - 30 V) ±0.1 % of FS ±1 Digit
Sampling cycle 250 ㎳
Contact output Up to 32 A contact 30 V d.c. 3 A max, 250 V a.c. 3 A
(DO) relay contacts B contact NO : 30 V d.c. 5 A max, 250 V a.c. 5 A
SSR output ON : 18 V d.c. Pulse voltage (Load resistance min. 800 Ω)
Control output
SCR output 4-20 ㎃ d.c. (Load resistance max. 600 Ω)
Current output 4-20 ㎃ d.c.
Load resistance Load resistance max. 600 Ω
Retransmission output
Output type Present value PV), Set value (SV), output volume (MV), Random selection
Refresh interval 250 ㎳
Input calibration Temperature 2 contacts : EUS(0 ~ 100 %)
(sensor bias)
Input type Scaling DC voltage (VDC): Input scaling according to conversion range
Input filter(LPF) 0 ~ 120 sec
Control mode Operation type Constant-value / Program control
Temperature
Control output SSR or SCR (4 - 20 ㎃ d.c.) output selection
control output
Pattern 100 patterns (1 pattern / 100 segments)
Segment 2,000 segments
PID group 4 groups
Auto-tuning Auto-tuning according to target set value
Control Proportional band 0.00 ~ 100.00 % (ON / OFF control for 0.00%)
operation Integral time
Functions 0 ~ 3,000 seconds (OFF state if 0 second is set)
Derivative time
ON/OFF control Set proportional band (PB) to 0
Direct/reverse action Depending on the direct/reverse action selection of the control output
Hysteresis EUS (0 ~ 100 %)
Temperature
Retransmission 4 - 20 ㎃ d.c. Present value PV), Set value (SV), output volume (MV)
(Ch.1 and 2)
output Scaling Auto scaling for defined upper/lower, limit range (4 - 20 mA d.c.)
Setting alarm System alarm: 8 contacts. Assign 4 of 8 pattern alarms to a pattern
Alarm type High/Low absolute, High/Low deviation, Within/Out of range (alarm direction, hold)
Absolute alarm
Alarm setting setting range EU (0 ~ 100 %)
Deviation alarm EUS (-100 ~ 100 %)
setting range
Hysteresis EUS (0 ~ 100 %)
Display TFT Color LCD (115.2 × 86.4 ㎜)
Resolution 640 × 480 pixel
Back light LED Back light
Back light life Approx. 40,000 h
Touch type Resistive type (4 Wires)
Language Korean/English/Chinese (Simplified)
Internal memory Non-volatile memory : 80 MB
Saving functions External memory SD Card (8 GB)
Saving interval 1 ~ 360 sec
Memory information Program information, set value save, recovery, temperature set / process / output value
Ambient temperature & humidity 0 ~ 50 ℃, 20 ~ 90 % RH (Without condensation)
Weight (g) 1,320

32
 Temperatrue controllers
Suffix code Components
Model Code Content Product Model Content
TD51 □- □ □ □ Programmable Temperature Controller Display part TD51□-1N□ Display part (5.7" TFT LCD)
0 2 Channel
Channels Temperature 2-channel control New
1 1 Channel TD510-MAIN product
module
Control module
1 5.7" TFT-LCD Temperature 1-channel control
Display part TD511-MAIN
N None module High
function
1 8 input contactsㆍ6 output contacts (1 module) Power module TM-PWR Power module
2 8 input contactsㆍ14 output contacts (2 modules) Programmable
Input/output Input module TM-DI Module with 16 input contacts Temperature
3 16 input contactsㆍ16 output contacts (3 modules) Humidity
N No input/output Output module TM-DO Module with 8 output contacts
Thermal
S Korean, English and Chinese (simplified) shock
Language Input/output Module with 8 input and 6 output
T Korean, English and Chinese (traditional) TM-DIO Test control
module contacts

※ This product consists of display part / power module / control module / input module / output module Multi-
channel
(digital input (DI) with up to 32 contacts, digital output (DO) with up to 32 contacts).

Economy
Ignorance
For freezer

TD300
Indicator

Specifications
Model TD300

Appearance

W×H×D (㎜) 96.0×96.0×100.0

Power voltage 100-240Va.c. 50/60 ㎐ Max. 10 W (voltage fluctuation rate: ±10 % of power voltage)
Screen 3.5” TFT-LCD and touch panel interface
Program Up to 100 patterns, individual pattern operation possible for each channel / Up to 2,400 segments (up to 100 segments per pattern
Pt100 (IEC751) -200.0 ~ 640.0 ℃, ± 0.1 % of FS
TC_K -200.0 ~ 1,370.0 ℃, ± 0.1 % of FS
TC_J -200.0 ~ 1,200.0 ℃, ± 0.1 % of FS
TC_E -200.0 ~ 1,000.0 ℃, ± 0.1 % of FS
Input TC_T -200.0 ~ 400.0 ℃, ± 0.1 % of FS
(2 channels) TC_R 0 ~ 1,700.0 ℃, ± 0.1 % of FS
TC_S 0 ~ 1,700.0 ℃, ± 0.1 % of FS
mV 0 - 100 ㎷ or -10 - 20 ㎷ (-999.9 ~ 9999.9), ± 0.1 % of FS
VDC 0 - 10 V (The signal range can be set, -999.9 ~ 9999.9), ± 0.1 % of FS
4 - 20 ㎃ 4 - 20 ㎃ : 250 Ω using the external resistor, V d.c. 1 ~ 5 V using after setting
Sampling cycle 500 ㎳
Control output 2 contacts for each channel (heating/cooling)
Voltage pulse
output (SSR) 24 V d.c. Pulse (Load resistance min. 600 Ω), minimum pulse width : 10 ㎳
Output
Current output 4-20 ㎃ d.c. (Load resistance max. 600 Ω)
(SCR)
Relay output NO → 250 V a.c. 5 A / 30 V d.c. 5 A
Protocol PCLINK, Modbus-ASCII
Communication
Specifications ● RS232C : 9600 ~ 38400 bps max. 10 m ● RS422/485 : 9600 ~ 38400 bps max. 1.2 ㎞ 256 Mode
Ambient temperature & humidity 0 ~ 50 ℃, 20 ~ 90 % RH (Without condensation)
Weight(g) 850

Suffix code
Model Code Content
TD300 □ □ 2-Channel Programmable Temperature Controller
1 RS485/422
Communication
2 RS232C
1 Korean/English (standard type)
Language
2 English/Chinese (simplified)

33
 TEMPERATURE CONTROLLER

TH510
Specifications
Model TH510

Appearance

W×H×D (㎜) 145.0×145.0×33.5

Power voltage 100–240 V a.c. Voltage fluctuation rate ±10 %
Power frequency 50/60 ㎐
Power consumption 30 V A max
● Between 1st and 2nd terminals: Min. 1500 V a.c. for 1 min ● Between 1st and FG terminals: Min. 1500 V a.c. for 1 min
Dielectric strength
● Between 2nd and FG terminals: Min. 1500 V a.c. for 1 min
● 2 types of RTD (Pt-100, KPt-100) ±0.1 % of FS ±1 Digit
Input type
● 2 types of DC voltage (1 - 5 V, 0 - 30 V) ±0.1 % of FS ±1 Digit
Sampling cycle 250 ㎳

Relay contact A contact 30 V d.c. 3 A max, 250 V a.c. 3 A

Contact outputs(DO) max. 32 contacts B contact NO : 30 V d.c. 5 A max, 250 V a.c. 5 A
SSR output ON : 18 V d.c. pulse voltage (load resistance min. 800 Ω)
Control output
SCR output 4-20 ㎃ d.c. (Load resistance max. 600 Ω)
Current output 4-20 ㎃ d.c.
Retransmission Load resistance Load resistance max. 600 Ω
output Output type Present value (PV), Set value (SV), output volume (MV), Random selection
Refresh interval 250 ㎳
Input calibration Temperature 1 contact: EUS (0 ~ 100%) Humidity 1 contact: EUS (0 ~ 100%)
(sensor bias)
Dry/wet bulb sensor Compensate the difference between the wet and dry bulb sensor after
Input type compensation removing the wet bulb sensor gauze.
Scaling DC voltage (VDC): Input scaling according to conversion range
Input filter (LPF) 0 ~ 120 sec
Control Operation type Constant-value / Program control
mode
Temperature control
Control output
Output (SSR) or current output (4 - 20 ㎃ d.c.) selection
output Humidity control
output
Pattern 100 patterns (1 pattern / 100 segments)
Segment 2000 Segment
Functions PID group 16 groups (temperature 4 zones X humidity 4 zones)
Control Auto-tuning Auto-tuning according to target set value
operation Proportional band 0.00 ~ 100.00 % (for 0.00 %, ON/OFF control)
Integral time
0.0 ~ 3000 sec. (OFF status when 0 sec is set)
Derivative time
ON/OFF control Set 0.0 to proportional band (PB)
Re- Temperature, Current output (4 - 20 ㎃ d.c.) Present value PV), Set value (SV), output volume (MV) selection
transmission Humidity
output Scaling Automatic scaling of set high and low range (4 - 20 ㎃ d.c.)
Setting alarm System alarm: 8 contacts Assign 4 of 8 pattern alarms to a pattern
Alarm Alarm type High/Low absolute, High/Low deviation, Within/Out of range (alarm direction,hold)
setting
Absolute alarm EU (0 ~ 100 %)
setting range
Display TFT color LCD (115.2 × 86.4 ㎜)
Resolution 640 × 480 pixel
Back light LED back light
Back light life Approx. 40,000 h
Touch type Resistive type (4 Wires)
Language Korean/English/Chinese (simplified)
Internal memory Non-volatile memory : 80 MB
Saving functions External memory SD card (8 GB)
Saving interval 1 ~ 360 sec
Memory information Program information, set value, recovery, temperature set / process / output value
Ambient temperature & humidity 0 ~ 50 ℃, 20 ~ 90 % RH (without condensation)
Weight (g) 1,320

34
 Temperatrue controllers
Suffix code
Model Code Content
TH □ 1 0 - □ □ □ Programmable Temperature & Humidity Controller
Display part 5 5.7" TFT-LCD New
1 8 input contacts.6 output contacts (1 module) product

Input/output 2 8 input contacts.14 output contacts (2 module)

3 16 input contacts.16 output contacts (3 modules) High
function
S Korean, English and Chinese (simplified)
Language
T Korean, English and Chinese (traditional) Programmable
Temperature
RS485 Humidity
Communication
E RS485, Ethernet
Thermal
※ Basic components (power module, Control module) shock
Test control
※ This product consists of power module/control module/Input module/output module 32 contacts, (digital input (DI) with up to 32 contacts, digital output (DO) with up to 32 contacts).

Multi-
Components channel

Product Model Content Economy

Ignorance
Display part TH510-1N□ Display part (5.7" TFT LCD) For freezer
Control module TH510-MAIN Temperature & Humidity Control Module
Power module TM-PWR Power module Indicator
Input module TM-DI Module with 16 input contacts
Output module TM-DO Module with 8 output contacts
Input/output
module TM-DIO Module with 8 input and 6 output contacts

TH300
Specifications
Model TH300

Appearance

W×H×D (㎜) 96.0×96.0×100.0

Program 100 Pattern (100 segments / 1 pattern) max. 2000 segments
Screen TFT LCD 70.08 × 52.56 ㎜ (3.5″)
Functions Contact input (DI): 4 contacts, Contact output (DO): max. 12 contacts, RS232/485
Power voltage 100-240 V a.c. 50/60 ㎐ (voltage fluctuation rate: ±10 %)
Display accuracy ●Temperature (℃) : ±0.2 % of FS ●Humidity (%RH) : ±2 % of FS
Sampling cycle 500 ㎳
Input type Pt100 Ω or 0-5 V d.c.
Control output ● ON : 24 V d.c. pulse voltage ● OFF : 0.1 V d.c. max. ● Pulse voltage (load resistance min. 800 Ω)
(OUT) ● Cycle time: 1 ~ 1000 sec
● Temperature / humidity : 4 - 20 ㎃ d.c. (load resistance max. 600 Ω) present value (PV), output volume (MV),
Retransmission output
Output (RET) set value (SV) ※by internal selection
● Resolution: approx. 7,000 ● Refresh interval : 500 ㎳
Contact output ● Relay : 8 contacts (1a X 8 contacts), N.O : 30 V d.c. 5 A, 240 V a.c. 5 A
(DO) ● Transistor: 4 contacts ( open collector output). 24 V d.c. 300 ㎃ max
Control type PID auto-tuning
Ambient temperature & humidity 0 ~ 50 ℃, 20 ~ 90 % RH (Without condensation)
Weight (g) 850

Suffix code
Model Code Content
TH300 □ □ Programmable Temperature & Humidity Controllers
1 RS232C communication
Communication
2 RS485/422 communication
1 Korean/English (standard type)
Language 2 English/Chinese (simplified)
3 English/Chinese (traditional)

35
 TEMPERATURE CONTROLLER

NP200
Specifications
Model NP200

Appearance

W×H×D(㎜) 96.0×96.0×100.0
Power voltage 100-240 V a.c. 50/60 ㎐ voltage fluctuation rate: : ±10 %
Power consumption Max. 6.0 W / max. 10 VA
Thermocouple input K, J, E, T, R, B, S, L, N, U, W, PLII,
Input RTD Pt100 (KS/IEC 751), KPt100 (KS)
(Multi Input) DC voltage input 1-5 V d.c. 0 - 10 V, -10 - 20 ㎷, 0 - 100 ㎷
DC Current input 4 - 20 ㎃ (Attach 250 Ω external resistor)
Control ● Relay output, voltage output (SSR), current output (SCR) ● Control behavior : PID control, ON/OFF control
Alarm type High/Low, High/Low deviation
Communication method RS485/422, 2-wire half-duplex or 4-wire half-duplex (by wiring method)
Setting By front Shift up, Down keys
Display PV : Digital LED, SV : Graphic LCD
Display accuracy 0.1 % of FS (Full Scale)
Setting accuracy 1 or 0.1 % (according to input range)
External control 4 alarm outputs (Run, Reset, Step, Hold)
Pattern 30 patterns, Up to 99 segments per pattern can be set
Segment 300 Segment
Set time unit of program Hours, minutes or minutes, seconds
Sampling cycle 100 ㎳
Insulation Resistance MIn. 500 V a.c. 20 ㏁
Dielectric strength 2300 V a.c. 50/60 ㎐ for 1 min (between 1st and 2nd terminals and between 1st terminal and ground)
Ambient temperature & humidity 0 ~ 50 ℃, 35 ~ 85 % RH (Without condensation)
Weight (g) 696

Suffix code
Model Code Content
NP200 □ □ Programmable Temperature Controller (96 X 96 mm)
0 Normal type (heating)
Control type
1 Heating/cooling type (synchronous control type)
0 None
1 RS422 / 485 (Communication function)
Option ※ Selection specification of DI 1 to 3 standard mounting (DI 4 to 7)
2 DI 4 contacts (DI 4~7)
3 RS422 / 485(Communication function), DI 4contacts

Range and Input Type

Classification Input Input code Range(℃) Accuracy Relative height
K *1 K1 -200.0 ~ 1370.0
K *1 K2 -200.0 ~ 1000.0
±0.10 % of FS
J *1 J -200.0 ~ 1200.0
±1digit
E *1 E -200.0 ~ 1000.0
T *1 T -200.0 ~ 400.0
R R 0 ~ 1700
±0.15 % of FS
Thermocouple(TC) B *2 B 0 ~ 1800
±1digit
S S 0 ~ 1700
※ Display Range:
L *1 L -200.0 ~ 900.0 ±0.1 % of FS ±1digit
-5% of the above range ~ +105 %
N N -200.0 ~ 1300.0 ±0.2 % of FS ±1digit
U *1 U -200.0 ~ 400.0 *1: Below 0℃ : ±0.2 % of FS ±1digit
W W 0 ~ 2300
Platinel II Platinel2 0.0 ~ 1300.0 *2 : 0 ~ 400 ℃ Range : ±5 % of FS ±2digit
JPt100 JPT100 -200.0 ~ 500.0
RTD
Pt100 PT100 -200.0 ~ 640.0 ±0.1 % of FS
1-5V 1/5 V Scaling range ±1digit
DC Voltage(V)
0 - 10 V 0/10 V SL-L ~ SL-H = -2000 ~ 14000
-10 - 20 mV 10/20 mV ※ If current input is used, attach a 250 Ω 0.1%
DC Voltage(mV)
0 - 100 mV 0/100 mV resistance between terminals 19 and 20 to
DC Current 4-20 mA d.c. 1/5 V※ use it as a 4-20 mAd.c. input.

36
 Temperatrue controllers

TS510
Specifications New
product
Model TS510

High
function
Appearance
Programmable
Temperature
Humidity
W×H×D (㎜) 145.0×145.0×33.5
Power voltage 100 – 240 V a.c. Voltage fluctuation rate: ±10 % of power voltage ±10 % Thermal
Power frequency 50/60 ㎐ shock
Test control
Power consumption 30 VA max
● Between 1st and 2nd terminals: min. 1500 V a.c. for 1 min ● Between 1st terminal and FG: min. 1500 V a.c. for 1 min Multi-
Dielectric strength
● Between 2nd terminal and FG: min. 1500 V a.c. for 1 min channel

● Thermocouple 11 types (K, J, E, T, R, B, S, L, N, U, Wre 5-26) ±0.15 % of FS ±1 digit

Input type ● RTD 2 types (Pt-100, KPt-100) ±0.1 % of FS ±1 Digit, Economy
● Current voltage 4 types (-10 - 20 ㎷, 0 - 100 ㎷, 1 - 5 V, 0 - 30 V) ±0.1 % of FS ±1 Digit Ignorance
For freezer
Sampling cycle 250 ㎳
Contact outputs Relay contact A contact 30 V d.c. 3 A max, 250 V a.c. 3 A
Indicator
(DO) max. 32 contacts B contact NO : 30 V d.c. 5 A max, 250 V a.c. 5 A
SSR output ON : 18 V d.c. Pulse voltage (Load resistance min. 800 Ω)
Control output
SCR output 4-20 ㎃ d.c. (Load resistance max. 600 Ω)
SCR output 4-20 ㎃ d.c.
Retransmission Current output Load resistance max. 600 Ω
output Load resistance Laboratory PV, Laboratory SV, hot chamber PV, cold chamber PV
Output type 250 ㎳
Input correction EUS(0 ~ 100 %)
Input
Input filter 0 ~ 120 sec
Control output Output (SSR) or current output (4 - 20 ㎃ d.c.) selection
Test pattern Max. 100, test type (10 types) selection per each pattern
PID group Hot chamber/cold chamber each 4 groups, deviation PID
Auto-tuning Auto-tuning according to target set value
Proportional band 0.00 ~ 100.00 % (for 0.00 %, ON/OFF control)
Control Integral time/
Functions 0.0 ~ 3000 sec. (OFF status when 0 sec is set)
operation Derivative time
ON/OFF control Set 0.0 to proportional band (PB)
Direct/reverse action Depending on the direct/reverse action selection of the control output
Direct/reverse action ARW zone setting (50 ~ 1000 % of proportional band)
A.T GAIN 0.0 ~ 10.0
Setting alarm System alarm 8 contacts
Alarm
Alarm type High/Low absolute, High/Low deviation, Within/Out of range (alarm direction, hold)
setting
Absolute alarm setrange EU (0 ~ 100 %)
Display TFT color LCD (115.2 × 86.4 ㎜)
Resolution 640 × 480 pixel
Back light LED back light
Back light life Approx. 40,000 h
Touch type Resistive type (4 Wires)
Language Korean/English/Chinese (simplified)
Internal memory Non-volatile memory : 80 MB
Saving functions External memory SD card (8 GB)
Saving interval 1 ~ 360 sec
Memory information Program information, set value, recovery, temperature set / process / output value
Ambient temperature & humidity 0 ~ 50 ℃, 20 ~ 90 % RH (Without condensation)
Weight(g) Approx. 1.32 kg

Suffix code Components

Model Code Content Product Model Content
TS510- □ □ □ Thermal Shock Test Controller
Display part TS510-1N□ Display part (5.7" TFT LCD)
Display 1 5.7" TFT-LCD
part N None Temperature 3-channel
Control module TS510-MAIN
16 input contacts ・ output 8 contacts (2 modules) + power module + control module
1 control module
Power module TM-PWR Power module
16 input contacts ・ 16 output contacts (3 modules) + power module +
Input/ 2 control module
output Input module TM-DI Module with 16 input contacts
16 input contacts ・ output 24 contacts (4 modules) + power module +
3 control module Output module TM-DO Module with 8 output contacts
N No input/output
S Korean, English and Chinese (simplified) Input/output Module with 8 input and 6 output
Language TM-DIO
T Korean, English and Chinese (traditional) module contacts

※ This product basically consists of display and control parts (power, control, input, output modules). Digital input (DI) with up to 32 contacts, digital output (DO) with up to 32 contacts

37
 TEMPERATURE CONTROLLER

ML
Specifications
Model ML-D4 ML-D2H ML-E

Appearance

W×H×D(㎜) 30.0×100.0×96.9
Power voltage 24 V d.c.
Voltage fluctuation rate ±10 % of power voltage
ML-D4S/C ML-D4M ML-D2HMS/SS ML-D2H MM ML-E
Power consumption
Max.7W Max.5W Max.7W Max.5W Max.3W
Thermocouple K, J, E, T, R, B, S, L, N, U, W, PL2 Each channel can
RTD Pt 100 Ω, KPt 100 Ω be selected by INP
DC voltage 0 - 100 ㎷, 1 - 5 V, 0 - 10 V parameter

Sampling cycle 50 ㎳
Input display resolution Below minimum unit of input range
Input impedance Thermocouple and DC voltage input: min. 1 ㏁
● Allowable input voltage : Within -2 - 5 V (thermocouple, RTD), within -5 to 12 V (DC voltage)
● Effect of allowable input resistance : approximately 0.2 uV/Ω
Allowable input
● Permissible input line resistance: not more than 10 Ω of side temperature resistance. However, the resistance between
the three lines will be the same)
Input correction ±100% of input range
Reference junction compensation error ±1.5 ℃ (0 ~ 50 ℃)
Input disconnection detection (Burn-out) up scale
Relay ● 1a contact ● 250 V a.c. 3 A, 30 V d.c. 3 A
Voltage output ● Approx. 12 V min (Load resistance min. 600 Ω) with short-circuit, limit to about 25 mA
Control Output (SSR) ● Time resolution: bigger between control cycle 0.1 % or 10 ㎳ -
Current output
● 4-20 ㎃ d.c. (Load resistance min. 600 Ω) ● Accuracy: ±0.1 % of FS (4 - 20 ㎃ range)
(SCR)
● Communication method : RS-232 standard ● Max. communication distance : 15 m
RS232C communication ●Communication speed : 9600 bps ● Start bit : 1 bit ● Data length : 8 bit
● Parity bit : Even ● Stop bit : 1 bit ●Supported protocol : PC-Link
● Max. number of connections : 31 units ● Communication sequence : No sequence
● Response time : Reception handling time + (response time x 10 ㎳) ● Stop bit : 1, 2 bit [initial value: 1]
● Data length : 7, 8 bit [initial value: 8] ● Parity bit : None, odd, even [initial value: even] ●Start bit : 1 bit
RS485 communication
● Max. communication distance : 1200 m ● Communication method : RS485 standard / 2-wire half-duplex
● Supported protocol : PC-Link, PC-Link with SUM, Modbus ASCII/RTU [[Initial value: PC-Link]
● Communication speed : 9600, 19200, 38400, 57600, 76800 bps [Initial value: 9600]
Ambient temperature & humidity 0 ~ 50 ℃ / 35 ~ 85 % RH (Without condensation)
Operating environment No toxic gases, magnetic fields or dust generating areas
Warming-up At least 30 min
Ambient temperature influence Thermocouple, DC voltage: bigger between ±3 uV / ℃ or ±0.03 % of FS / ℃, RTD : ±0.1 ℃ / ℃ max
Power supply change influence Bigger between ±3 uV / 10 V or ±0.03 % of FS / 10 V
Storage temperature & humidity -25 ~ 65 ℃ / 5 ~ 95% RH (Without condensation)
Weight (g) 220

Suffix code
■ ML-D2H Modular Temperature Controllers ■ ML-D4 Modular Temperature Controllers
Model Code Content Model Code Content
ML-D 2 H □ Modular Temperature Controller
ML-D 4 □ Modular Temperature Controller
Number of
2 2 Chanels
channels Number of
Input H Heating/cooling control (simultaneous), heater break alarm (HBA) 4 4 Chanels
channels
MM OUT1 : Relay output / OUT2 : Relay output
M Relay output
SM OUT1 : SSR Output / OUT2 : Relay output
SS OUT1 : SSR Output / OUT2 : SSR Output
Control output Control output S SSR output (12 V d.c.)
CM OUT1 : 4-20 ㎃ d.c. / OUT2 : Relay output
CS OUT1 : 4-20 ㎃ d.c. / OUT2 : SSR Output C SCR output (4-20 ㎃ d.c.)
CC OUT1 : 4-20 ㎃ d.c. / OUT2 : 4-20 ㎃ d.c.
Ex: temperature controller 4 channel relay output : ML-D4M
■ ML-E Modular Event Outputs
Model Content
ML-E Modular Event Output Unit (8 contacts relay)

38
 Temperatrue controllers

MT100
Specifications New
product

Model MT100
High
function

Appearance
Programmable
Temperature
Humidity

W×H×D(mm) 155.0×130.0×16.5
Thermal
Display screen MONO LCD (128 X 64 ㎜) shock
Test control
Temperature input (Multi Input) 4 contacts, thermocouple (K,J), RTD (Pt 100 Ω)
Sampling cycle 1 Sec
Multi-
Measuring range 0 ~ 300 ℃ channel
Input correction ±100 % of FS
Input impedance Approx. 1 MΩ (thermocouple input) Economy
Ignorance
Input Reference contact ± 1.5 ℃ (0 ~ 50 ℃ range) For freezer
compensation error
Allowable input lead resistance RTD (max. 10 Ω. but the resistance among 3 lines should be same)
Indicator
Input disconnection detection UP SCALE(Reverse action), DOWN SCALE(Direct action)
Pressure input contact (4 - 20 ㎃ d.c. or contact input)
Pressure sampling cycle 1sec.
Pressure scale range 0.00 ~ 10.00 (Decimal point fixed)
Contact input Max. 8 contacts (ON / OFF resistance: 1 ~ 10 KΩ)
Display accuracy Temperature: ±0.3 % of FS ±1 Digit, pressure: ±3 % of FS ±1 Digit
Performance Insulation Resistance Min. 20 ㏁ (500 V d.c.) measuring terminal-power terminal
Dielectric strength 2300 V a.c., 50/60 ㎐ for 1 min (between measuring terminal and power terminal, between power terminal and ground terminal)
8 contacts (① Option, ② Over pressure, ③ Overheating, ④ Over pump direct action, ⑤ Over pump reverse action,
Digital input (DI)
⑥ Medium supplement termination, ⑦ Medium supplement start, ⑧ RUN/RESET
Current detection input 3 phases (3 CT)
Contact output (DO) 6 contacts (① Option, ② Temperature alarms , ③ Inhale, ④ Ramp direct action, ⑤ Ramp reverse action, ⑥ Medium supplement)
Control output Cooling control output (relay) 1 contact, heating control output (SSR) 1 contact
Reverse phase detection 3-phase motor reverse rotation detection function
Operation reservation Reserve run time (time or weekly reservation)
Forced cooling When requiring sudden cooling, 100% cooling output after stopping heating output
Control Preheating function Control by preheating set value to prevent winter frost
functions
Abnormal history monitoring Up to 20 errors can be memorized and displayed
and output
Control type PID auto-tuning
Proportional band 0(0.0) to the maximum value of range
Integral time 1 ~ 3,600 sec
Derivative time 1 ~ 3,600 sec
ARW(Anti Reset Wind-up) Auto, 0 ~ 100 %((Proportional band)
ON/OFF control Set the proportional band to "0"
Alarm type 6 external alarms by contact input
Communication function RS485/422
● Contact capacity: 1 a, 250 V a.c., 1 A, 30 V d.c. 1 A (resisitive load ● Proportional period: 1 ~ 1000 sec
Cooling (relay)
●Time resolution: bigger between 0.1 % or 16.667 ㎳
Control
output ● Voltage pulse: approx. min. 12 V d.c. (load resistance min. 600 Ω) ● Proportional period: 1 ~ 1000 sec,
Heating (SSR)
● Time resolution: bigger between 0.1 % or 16.667 ㎳
Contact output 6 contacts (DO) 1 a, 250 V a.c., 1 A. 30 V d.c. 1 A (Resisitive load)
● Communication method : 2-wire half-duplex or 4-wire half-duplex ● Max. number of connections : 31
Communication ●Communication distance : 1,200 m ● Communication sequence : No sequence
specifications ● Communication speed: 9,600 bps ● Start bit : 1 bit ● Stop bit : 1 bit
● Data length : 8 bit ● Parity bit : NONE ● Protocol : PC-Link with SUM
Power voltage 100-240 V a.c. 50/60 ㎐
Voltage fluctuation rate ±10 % of power voltage
Power consumption 8 VA
Ambient temperature & humidity 0 ~ 50 ℃, 35 ~ 85 % RH (Without condensation)
Storage temperature -25 ~ 65 ℃
Weight (g) 850

Suffix code
Model Code Content
MT100 □ □ □ Multi Input Mold Temperature Controller
0 No communication
Communication
1 RS485/422
0 No pressure inspection
Pressure
1 Pressure inspection by contact input
inspection
2 Pressure inspection by 4 - 20 mA d.c.
0 HB None
Current inspection (HB)
1 HB 3 contacts ※CT(CTL-6-S) sold separately

39
 TEMPERATURE CONTROLLER

MC9
Specifications
Model MC9

Appearance

W×H×D(㎜) 96.0×96.0×100.0
Thermocouple K, J, R, S, B, E, N, T, W, PL2, U, L
RTD Pt100 Ω, KPt100 Ω
DC voltage 0-5 V, 1-5 V, 0-10 V, 4-20 ㎃ (Attach 250 Ω external resistor)
Sampling cycle 1 sec
Input display resolution Basically, below the range decimal point
Input impedance Thermocouple and DC voltage input: min. 1 MΩ
Input Allowable input resistance Approx. 0.2 ㎶/Ω
Allowable input lead resistance RTD (Max. 10 Ω. but the resistance among 3 lines should be same)
Allowable input voltage Within -2 - 5 V (thermocouple,RTD), within -5 to 12 V (DC voltage)
Scaling 0.0 % ~ 100.0 % of FS
Input correction ±100 % of FS
Reference contact ±1.5 ℃ (0 ~ 50 ℃ range)
compensation error
Input disconnection detection UP SCALE(Reverse action), DOWN SCALE(Direct action)
Thermocouple Bigger between ±0.3 % of FS ±1 Digit or ±2 ℃
Degree of
RTD Bigger between ±0.3 % of FS ±1 Digit or ±0.8 ℃
indication
Performance DC voltage ±0.3 % of FS ±1 Digit
Insulation Resistance 20 ㏁이상 (500 V d.c.), measuring terminal - power terminal
Dielectric strength 2,300 V a.c. 50/60 ㎐, 1 min measuring terminal - power terminal
Control type PID auto-tuning
Simultaneous channel setting 4/8 channels simultaneous setting of the same value
Control operation a) Reverse action (heating) / direct action (cooling). by "suffix code" b) Heating/cooling simultaneous control (4 channels only)
Setting range Same as range and input code
Digital input (DI) RUN/STOP or control zone selection by contact input
Auto-tuning Auto-tuning by parameter selection
Proportional band 0(0.0) to the maximum value of range
Integral time 1 ~ 3,600 sec
Control Derivative time 1 ~ 3,600 sec
function ARW(Anti Reset Wind-up) Auto, 0 ~ 100 % (Proportional band)
and output Gradient setting 0(0.0) to max. range/1 min (gradient setting for target value)
Scan function Displays the measured value and set value for each channel sequentially
ON/OFF control Set the proportional band to "0"
Multi-memory zone 8 zone selection for each channel
Heater break alarm (HBA) 0.0 - 100.0 A (ON/OFF control, can be used on time proportional control output)
HBA dead band setting 0 ~ 100 sec
Loop break alarm (LBA) 0.1 ~ 200.0 min (dead band : 0 ~ 100 sec.)
Alarm output Up to 3 contacts, parallel (OR) operation for all channels (by selected specifications)
Alarm type Selection by parameter
● Contact capacity : 1 a, 250 V a.c. 3 A (resisitive load) ●Proportional period : 1 ~ 1000 sec
Relay output
● Time resolution : Lower between 0.1 % or 10 ㎳
Control ● Voltage pulse : approx. min. 12 V d.c. (load resistance min. 600 Ω) ● Proportional period : 1 ~ 1000 sec
Voltage output (SSR)
output ● Time resolution : Lower between 0.1 % or 10 ㎳
Current output (SCR) ● Current: 4 - 20 ㎃ d.c., 0 - 20 ㎃ (load resistance max. 600 Ω) ● Accuracy: ±1.0 % of FS (4 - 20 ㎃ range)
Triac 200 V a.c. 0.5 A (Ambient temperature 40 ℃ max), Zero Crossing function
Temperature alarms (AL1,2,3) 1 a, 250 V a.c., 1 A, 30 V d.c. 1 A (resisitive load) / Output points: Max. 3 points (by selected specifications)
Alarm 1 a 1 contact, 250 V a.c., 1 A, 30 V d.c. 1 A (resisitive load)
output Heater break alarm (HBA) ● Measuring current: 1 - 100 A a.c. (resolution: 0.5 A, ± 5 % of FS ± 1 Digit)
(relay) ● CT for heater break detection: Model name JS81L (J&D Electronic.Co.Ltd) ● Accuracy: bigger between ±5 % of FS or ±2 A
Loop break alarm (LBA) 1 a 1 contact, 250 V a.c., 1 A, 30 V d.c. 1 A (resisitive load) / Proportional period: 1 ~ 1000 sec
Power voltage 100-240 V a.c. 50/60 ㎐
Voltage fluctuation rate ±10 % of power voltage
Power consumption 12 VA
Ambient temperature & humidity 0 ~ 50 ℃, 35 ~ 85 % RH (Without condensation)
Storage temperature -25 ~ 65 ℃
Vibration resistance 10 - 55 ㎐, single amplitude 0.75 ㎜, 3 axes each direction, 2 h
Shock resistance 300 ㎨, 3 axes each direction, 3 times
Weight (g) 700

40
 Temperatrue controllers
Suffix code
■ MC9 (4 channels) ■ MC9 (8 channels)
Model Code Content Model Code Content
4-Channel Digital Temperature 8-Channel Digital Temperature New
MC9-4 □ □ □ □ □ □ MC9-8 □ □ □ □ □ □
Controllers Controllers product

D For cooling control (Direct action) D For cooling control (Direct action)
Control
Control Type High
R For heating control (Reverse action) R For heating control (Reverse action) function
Type
W Heating cooling simultaneous control
Input type □ Refer to "Range and input code chart" Programmable
Input type □ Refer to "Range and input code chart" Temperature
M Relay contact output Humidity

M Relay contact output

S Output for SSR drive Thermal
S Output for SSR drive shock
Heating output Test control
Heating output T Output for Triac drive
T Output for Triac drive (output 1 ~ 4)
(output 1 ~ 4)
4 Current output (4-20 ㎃ d.c.) Multi-
4 Current output (4-20 ㎃ d.c.) channel

5 Current output (0-20 ㎃ d.c.) 5 Current output (0-20 ㎃ d.c.)

Economy
None (when selected, input channels 5
N None (if control output operation is DR) N Ignorance
~ 8 are for indication) For freezer
Cooling output Cooling output
M Relay contact output M Relay contact output
(output 5~8) (output 5~8)
* if control types are S Output for SSR drive * if control types are S Output for SSR drive
Indicator
D and R then fix to N D and R then fix to N
* if control type is W T Output for Triac drive * if control type is W T Output for Triac drive
then select among then select among
4 Current output (4-20 ㎃ d.c.)
M,S, t, 4 and 5 M,S, t, 4 and 5 4 Current output (4-20 ㎃ d.c.)
5 Current output (0-20 ㎃ d.c.)
5 Current output (0-20 ㎃ d.c.)
N None
N None (alarm output AL1, 2, 3 built-in)
1 AL2, AL3
2 RS232 + contact input
Option 2 AL2, AL3 + RS232 + contact input Option
AL2, AL3 + RS485 / 422 + contact 3 RS485 / 422 + contact input
3
input
4 heater break
4 AL2, AL3 + heater break
Power voltage 2 100-240 V a.c. 50/60 ㎐
Power voltage 2 100-240 V a.c. 50/60 ㎐

Range and input code chart

Classification Code Input type Range (℃) Accuracy
K0 K -200 ~ 1370
K1 K -199.9 ~ 999.9
J0 J -200 ~ 1200
J1 J -199.9 ~ 999.9
E0 E -199.9 ~ 999.9
E1 E -199.9 ~ 999.9
T0 T -199.9 ~ 400.0
R0 R 0 ~ 1700
R1 R 0.0 ~ 999.9
Thermocouple (TC) B0 B 0 ~ 1800 Bigger between ±0.3 % of FS ± 1 Digit or ±2 ℃
B1 B 0.0 ~ 999.9
S0 S 0 ~ 1700
S1 S 0.0 ~ 999.9
L0 L -199.9 ~ 900.0
N0 N -200 ~ 1300
N1 N -199.9 ~ 999.9
U0 U -199.9 ~ 400.0
W0 W 0 ~ 2300
A0 PL2 0 ~ 1390
P0 KPt100 Ω -199.9 ~ 500.0
RTD Bigger between ±0.3 % of FS ± 1 Digit or ±0.8 ℃
D0 Pt100 Ω -199.9 ~ 600.0
V0 0-5 V d.c. -199.9 ~ 999.9
DC voltage(mV) V1 1-5 V d.c. -199.9 ~ 999.9 ±0.3 % of FS ± 1 Digit
V2 0-10 V d.c. -199.9 ~ 999.9

※ When using current input, please attach 250 Ω 0.1% resistor to input signal terminal

41
 TEMPERATURE CONTROLLER

SM100
Specifications
Model SM100-□□12 SM100-□□16 SM100-□□20

Appearance

Number of channels 12 channels 16 channels 20 channels

Input type ● Thermocouple (K), range : -199.9 ℃ ~ 999.9 ℃ / RTD (Pt100 Ω) ● Range : -199.9 ℃ ~ 640.0 ℃
Display accuracy ±0.5 % of max. range (± 0.5 % of FS)
RJC compensation
Within display accuracy
Measurement accuracy
input Sampling cycle 1 sec.
Input correction -1,200.0 ℃ ~ 1,200.0 ℃
Input filter 0.0 ~ 120.0 sec.
Burn-out operation Thermocouple : Upscale RTD : Upscale
Setting method Setting by communication program
Number of settings 12 contacts 16 contacts 20 contacts
Settings and
Memory Storage Storage by Semiconductor
display
Device address setting Setting by built-in HEX BCD switch (1 to 15)
Display LED Power indication, communication indication, control output indication
Output Type SSR driving voltage pulse output (driving voltage: 12 V d.c., load resistance min. 600 Ω)
Control operation Time proportional PID or ON/OFF control
Number of PID groups 1 Group / Channel
Proportional cycle 1 sec. ~ 100 sec.
(output cycle)
Proportional banD (P) 0 ~ 1200.0 ℃
Control Integral time (I) 1 ~ 3600 sec.
output Derivative time (D) 1 ~ 3600 sec.
ARW (Anti Reset Wind-up) 0.1 ~ 100.0 % ※ “0” setting (Auto)
Manual reset 0.0 ~ 100.0 % (During ON/OFF control)
Hysteresis 0 ~ 120.0 ℃ (During ON/OFF control)
Control output operation Cooling control (direct action) / heating control (reverse action) selection
Emergency output 0.0 ~ 100.0 %
Contact input Number of external 1 contact (RUN/STOP by built-in dip switch)
contact inputs
Communication standard RS485/422(4-Wire type)
Communication method Half duplex
Max. number of connections 15 ※ Address setting by HEX BCD switch
Communication sequence No sequence
Start bit 1 Bit
Communi- Stop bit 1 Bit
cation
specifications Parity bit Even
Data length 8 Bit
Transmission speed 19200 bps
Communication distance 1.2 ㎞ max
Communication protocol PC Link with SUM
Response time Reception handling time + (response setting time × 25 ㎳)
Power voltage 100 - 240 V a.c. 50/60 ㎐ (±10% of rated power voltage)
Power consumption max.25 VA
Insulation resistance Min. 20 ㏁. between power terminal and grounD (500 V d.c. Mega)
Dielectric strength 2000 V a.c. for 1 min (between power terminal and ground)
Ambient temperature & humidity 0 ~ 50 ℃, 20 ~ 85 % RH (Without condensation)
Storage temperature -20 ℃ ~ 70 ℃
Vibration resistance 10 - 55 ㎐ 19.6 ㎨ 3 axes 6 directions 2 h
Shock resistance 196 ㎨ 3 axes 6 directions each 3 times
Case material Cold rolled steel plate (SPC)
Weight (g) 1270

Suffix code
Model Code Content
SM100- □ □ □ □ Multi-channel Board Type Temperature Controller (basic specifications: alarm output 3 contacts, built-in run/stop SW 1 contact, RS485/422)
K K(CA) thermocouple input (IEC 584-1)
Input type
P Pt100 Ω RTD input (IEC 751)
A Control output (SSR driving voltage pulse output)
Output form
N No control output (Indication only)
Number of control 20 20 Channels (standard product)
contacts 16 16 Channels
(Number of channels) 12 12 Channels

42
 Temperatrue controllers

BX8
Specifications New
product
Model BX8
High
function

Appearance Programmable
Temperature
Humidity

Thermal
Power voltage 100-240 V a.c. (Voltage fluctuation rate: ±10 %) shock
Test control

● Thermocouple : K, J, E, T, R, B, S, L, N, U, WRe 5-26, PL-Ⅱ(Refer to input signal and measuring range)

Input Multi-
● RTD : Pt100 Ω, KPt100 Ω, ● DC voltage input : 1 - 5 V, -10 - 20 ㎷, 0 - 100 ㎷ (Freescale) channel

Sampling cycle 250 ㎳

Economy
Input impedance Thermocouple and DC voltage input (㎷): min. 1 ㏁, DC voltage input (V): approx. 1 ㏁ Ignorance
Allowable signal source For freezer
Thermocouple: max. 250 Ω, voltage: max. 2 ㏀
resistance
Lead wire allowable
RTD : max. 10 Ω/1 wire (but the conductor resistance among 3 wires should be same) Indicator
Input resistance
Allowable input voltage Within ±10 V (thermocouple, RTD, voltage: ㎷ d.c.), within ±20 V (voltage: V d.c.)
Noise removal rate NMRR (normal mode): 40 dB min (50/60 ㎐ ±1 %), CMRR (common mode): 120 dB min (50/60 ㎐ ±1 %)
Standard Thermocouple/RTD (KS/IEC 751/DIN)
Reference contact
compensation error ±1.5 ℃ (15 ~ 35 ℃ interval), ±2.0 ℃ (0 ~ 50 ℃ interval)
Input disconnection Thermocouple: OFF, UP/DOWN Scale selection, RTD : UP Scale (thermocouple and RTD BURN-OUT시 detection current: approx. 50 ㎁)
detection (BURN-OUT)
Measuring accuracy ±0.5 % (FULL SCALE)
● Current output range : 4-20 ㎃ d.c. ● Load resistance : max. 600 Ω ● Resolution : approx. 3,000
Retransmission output ● Output refresh interval : 250 ㎳ ● Accuracy : ±0.5% of max. scale (4 - 20 ㎃ range)
● Output ripple : ±0.3% of max. scale (P-P) max. (150 ㎐)
● Contact capacity : 240 V a.c. 1 A, 30 V d.c. 1 A (Resisitive load) ● Contact configuration : 1 a
● Output points: Depending on model specifications (refer to connection diagram)
Alarm output ● Number of contacts : 1 contact ・ Current measuring range : 1 - 50 A a.c. (resolution: 0.5 A, ±5 % of max. scale ±1 digit)
(HBA) ● Alarm output : selectable in alarm output ● Dead band : 0 ~ 100 % of max. range
● Other : available during ON/OFF control or time proportional output (but not during current output or cooling output)
● Break detection is not possible below 0.2 sec. during output on

● Contact capacity : 240 V a.c. 3 A, 30 V d.c. 3 A (Resisitive load) ● Contact configuration : 1 C

Output Relay
● Time resolution : smaller between 0.1 % or 10 ㎳ ・Proportional period: 1 ~ 1000 s
contact
● Output operation : Time proportional, ON/OFF ● ON / OFF hysteresis: 0 ~ 100 % (Full Scale)
output
● Output limit : 0.0 ~ 100.0 % range high limit (OH), low limit(OL) selectable (Also during auto-tuning)

● ON voltage: min. approx. 24 V d.c. (load resistance min. 600 Ω, 30 mA current limit during short circuit)
SSR output
Control ● Proportional period : 1 ~ 1000 s ● OFF voltage : max. 0.1 V d.c. ● Output operation: time proportional
(Voltage pulse
output ● Time resolution : smaller between 0.1 % or 10 ㎳
output)
● Output limit : 0.0~100.0 % range, high limit (OH) low limit(OL) selectable (also during AT)

● Current output range : 4 - 20 ㎃ d.c. ● Load resistance : max. 600 Ω ● Output refresh interval : 250 ㎳
Current
● Output operation : continuous PID ● Accuracy : ±0.5% of max. scale (4 - 20 ㎃ range)
output
● Resolution : approx. 3000 ● Output ripple : ±0.3% of max. scale (P-P) max. (150 ㎐)
(4 -20 ㎃)
● Output limit : -5.0 ~ 105.0 %range, high limit (OH) low limit(OL) selectable (also during AT)
Weight (g) 300

※ Control output : output can be selected from relay, current or SSR, heating / cooling type can be set individually.

Suffix code
Model Code Content
BX8- □ □ Board Type Digital Temperature Controller

0 Normal
Control type
1 Heating/cooling type

0 SV2 / SV3 (Basic specifications: alarm output 2 contacts , (1 contact is determined by cooling output))

1 HBA
Option
2 RS485

3 HBA / RS485

43
 TEMPERATURE CONTROLLER

HY-8000/8200/72/48
Specifications
UPGRADE

.PEFM ): ): ): ):

Appearance

W×H×D(㎜) 96.0×96.0×125.0 96.0×96.0×125.0 72.0×72.0×110.0 48.0×48.0×100.0

5IFSNPDPVQMFJOQVU 5$,
3FGFSFODFKVODUJPO
p˫XJUIJO˫
DPNQFOTBUJPOBDDVSBDZ
*OQVU
35%JOQVU 1UĒ
"MMPXBCMFXJSJOHSFTJTUBODF ĒPSMFTTCVUUIFSFTJTUBODFCFUXFFOXJSFTTIPVMECFUIFTBNF
*OQVUTBNQMJOHDZDMF NT
0VUQVUUZQF 3FMBZ$7BD"
$POUSPMUZQF 0/0''DPOUSPM1SPQPSUJPOBMDPOUSPM4FMFDUJWFCZ*OUFSOBM%*1TXJUDI
1SPQPSUJPOBMCBOE ˫
$POUSPM
.BOVBMSFTFU.3 
PVUQVU
$POUSPMDZDMF TFD
)ZTUFSFTJT ˫
0VUQVUBDUJOH 3FWFSTFBDUJOHIFBUJOH
"MBSNUZQF .PEFM):POMZ)JHIMJNJUBMBSN
"MBSN
0VUQVUUZQF 3FMBZ$7BD"
PVUQVU
)ZTUFSFTJT ˫
1PXFSTVQQMZWPMUBHF 7BD)[
7PMUBHFVDUVBUJPOSBUF pPGQPXFSTVQQMZWPMUBHF
1PXFS
*OTVMBUJPO3FTJTUBODF .JO.Ē7ED
TVQQMZ
%JFMFDUSJDTUSFOHUI 7BD)[GPSNJOVUFCFUXFFOTUBOEOEUFSNJOBM
1PXFSDPOTVNQUJPO 7" 7" 7" 7"
%JTQMBZBDDVSBDZ pPG'4p%JHJU
"NCJFOUUFNQFSBUVSFIVNJEJUZ ˫3)XJUIPVUDPOEFOTBUJPO
4UPSBHFUFNQFSBUVSF ˫
8FJHIUH    

Suffix code
.PEFM $PEF %FTDSJQUJPO
): ˩ ˩ ˩ ˩ ˩ ˩ ˩ %JHJUBMUFNQFSBUVSFDPOUSPMMFS
 89)NN
 89)NN
%FTDSJQUJPO
 89)NN
 89)NN
, ,UIFSNPDPVQMF
*OQVU
1 35%1UĒ*&$
$POUSPMPVUQVU . 3FMBZDPOUBDUPVUQVU
/ /POF
"MBSNPVUQVU
0 )JHIBMBSN0OMZGPS):NPEFM
$POUSPMEJSFDUJPO 3 3FWFSTFBDUJPO)FBUJOHDPOUSPM
1PXFSTVQQMZWPMUBHF " 7BD)[
3BOHFDPEF ˩ 3FGFSUPUIFSBOHFBOEJOQVUDPEF

Range and input code chart

3BOHF˫
$MBTTJDBUJPO $PEF *OQVU
): ): ): ):
 
5IFSNPDPVQMF 5$,
  
 
35% 1UĒ
 

44
 Temperatrue controllers

DF2
Specifications
UPGRADE
New
product
Model %'
High
function

Programmable
Appearance Temperature
Humidity

Thermal
shock
Test control
W×H×D(㎜) 48.0 × 96.0 × 62.5
Multi-
5IFSNPDPVQMFJOQVU 5$, channel

3FGFSFODFKVODUJPO
p˫XJUIJO˫ Economy
DPNQFOTBUJPOBDDVSBDZ
Ignorance
*OQVU 35%JOQVU 1UĒ For freezer

"MMPXBCMFXJSJOHSFTJTUBODF ĒPSMFTTCVUUIFSFTJTUBODFCFUXFFOXJSFTTIPVMECFUIFTBNF
Indicator

*OQVUTBNQMJOHDZDMF NT

0VUQVUUZQF 3FMBZ$7BD"

$POUSPMUZQF 0/0''DPOUSPM1SPQPSUJPOBMDPOUSPM4FMFDUJWFCZ*OUFSOBM%*1TXJUDI

1SPQPSUJPOBMCBOE ˫
$POUSPM
.BOVBMSFTFU.3 
PVUQVU
$POUSPMDZDMF TFD

)ZTUFSFTJT ˫

0VUQVUBDUJOH 3FWFSTFBDUJOHIFBUJOH

1PXFSTVQQMZWPMUBHF 7BD)[

7PMUBHFVDUVBUJPOSBUF pPGQPXFSTVQQMZWPMUBHF
1PXFS
*OTVMBUJPO3FTJTUBODF .JO.Ē7ED
TVQQMZ
%JFMFDUSJDTUSFOHUI 7BD)[GPSNJOVUFCFUXFFOTUBOEOEUFSNJOBM

1PXFSDPOTVNQUJPO 7"

%JTQMBZBDDVSBDZ pPG'4p%JHJU

"NCJFOUUFNQFSBUVSFIVNJEJUZ ˫3)XJUIPVUDPOEFOTBUJPO

4UPSBHFUFNQFSBUVSF ˫

8FJHIUH 

Suffix code
.PEFM $PEF %FTDSJQUJPO
%' ˩ ˩ ˩ ˩ ˩ ˩ ˩ &DPOPNJDBM%JHJUBM5FNQFSBUVSF$POUSPMMFS
"QQFBSBODF  89)च
, ,UIFSNPDPVQMF
*OQVU
1 35%1UĒ*&$
$POUSPMPVUQVU . 3FMBZPVUQVU
"MBSNPVUQVU / /POF
$POUSPMPQFSBUJPO 3 3FWFSTFBDUJPOIFBUJOHDPOUSPM
1PXFSTVQQMZWPMUBHF " 7BD)[
3BOHFDPEF ˩ 3FGFSUP3BOHFBOEJOQVUDPEFDIBSU

Range and input code chart

$MBTTJDBUJPO $PEF *OQVU 3BOHF˫
 
5IFSNPDPVQMF 5$,
 
 
35% 1UĒ
 

45
 TEMPERATURE CONTROLLER

HY-1000, HY-2000 UPGRADE

Specifications
Model HY-1000 HY-2000

Appearance

W×H×D(㎜) 72.0×72.0×109.2 96.0×96.0×103.9

1PXFSTVQQMZWPMUBHF 7BD7BDऎ

7PMUBHFWBSJBUJPOSBUF 3BUFE7PMUBHFp

1PXFSDPOTVNQUJPO "QQSPY7"NBY

*OQVU 5IFSNPDPVQMF3FTJTUJWF

$POUSPMNFUIPE 1SPQPSUJPOBMDPOUSPM

4FUUJOHNFUIPE "OBMPH4FUUJOH

%JTQMBZNFUIPE /PO%JTQMBZ

$POUSPMPVUQVU 3FMBZ$7BD"

4FUUJOHBDDVSBDZ 8JUIJOpPG.BY3BOHF

1SPQPSUJPOBMCBOE PG.BY3BOHFYFE

1SPQPSUJPOBMDZDMF 3FMBZ0VUQVU"QQSPYTFD
˖ 5IFSNPDPVQMF#FMPXĒ
&YUFSOBMJOQVUSFTJTUBODF
˖ 3FTJTUJWF#FMPXĒ1FS8JSF5IFSFTJTUBODFPGFBDIXJSFTIPVMECFUIFTBNF
%JFMFDUSJDTUSFOHUI 7BDऎGPSNJO
˖
.FDIBOJDBM.JONJMMJPOTUJNFT
3FMBZMJGFFYQFDUBODZ
˖&MFDUSJDBM.JOUIPVTBOETUJNFT7BD"3FTJTUJWFMPBE
"NCJFOUUFNQFSBUVSFIVNJEJUZ ˫3)8JUIPVUDPOEFOTBUJPO

8FJHIUH ˖):˖):˟*ODMVEJOHCSBDLFUT

Suffix code
.PEFM $PEF %FTDSJQUJPO
): ˩ ˩ ˩ ˩ ˩ ˩ "OBMPHUFNQFSBUVSFDPOUSPMMFS

 NNYNN
"QQFBSBODF
 NNYNN

, 5$,
JOQVU
1 1U

$POUSPMPVUQVU . 3FMBZDPOUBDUPVUQVU

$POUSPMPQFSBUJPO 3 3FWFSTFBDUJPOIFBUJOHDPOUSPM

1PXFS " 7BD7BD

3BOHFDPEF 4FFSBOHFDPEFUBCMF

Range and input code chart

%JWJTJPO $PEF 3BOHF˫

 
5IFSNPDPVQMF
 

 
35%
 

46
 Temperatrue controllers

ND4
Specifications New
product

Model ND4 ND4(For socket)

High
function

Programmable
Temperature
Appearance Humidity

Thermal
shock
Test control

W×H×D(㎜) 48.0×48.0×79.5 48.0×48.0×78.0 Multi-

channel

Thermocouple K, J (J Type is for HY-2000 only)

Economy
RTD Pt100 Ω(IEC751) Ignorance
Input For freezer
Allowable signal source Max. 100 Ω (thermocouple input)
resistance
Lead wire allowable RTD max. 10 Ω. (but the resistance among 3 lines should be same) Indicator
resistance
Control type Proportional control, ON/OFF control (by suffix code)

Control operation Reverse action or direct action (by suffix code)

Setting range Same as input range chart

Control Proportional band 3 % of FS(Fixed)
functions and
output Proportional period Approx. 25 ~ 30 sec (Relay output), Approx. 2 ~ 4 sec (voltage output (SSR))

Hysteresis Approx. 2 % of FS, fixed (ON/OFF control, 400 ℃ standard)

Input disconnection Output OFF when range is over
detection
Control output Relay (1 c, 250 V a.c., 3 A resisitive load)

Power voltage 110/220 V a.c. 60 ㎐ (But for ND4, 110 V a.c. or 220V a.c. are separated)

Voltage fluctuation rate ±10 % of power voltage

Power consumption Max. 3 VA

Dielectric strength 2000 V a.c. 50/60 ㎐ for 1 min (Between different live parts)

Ambient temperature & humidity 0 ~ 50 ℃, 35 ~ 85 % RH (without condensation)

Storage temperature -25 ~ 65 ℃

Weight (g) 200

Suffix code
Model Code Content
ND4 □ □ □ □ □ □ Temperature Controller Without Indicator
F ON/OFF control (2 position control)
Control type
P Proportional control
K K thermocouple
Input
P RTD Pt100 Ω(IEC751)
Control output M Relay
R Reverse action (Heating control)
Control operation
D Direct action (Cooling control)
Range code Refer to "Range and input code chart"
Terminal structure T Terminal type
※ Specify the power voltage of ND4 separately (110 V a.c. or 220 V a.c.)

Range and input code chart

ND4
Code
Input Range (℃)
1 Pt -50 ~ 50
2 Pt -100 ~ 100
3 Pt 0 ~ 100
5 Pt, K 0 ~ 200
6 Pt, K 0 ~ 300
7 Pt, K 0 ~ 400

47
 TEMPERATURE CONTROLLER

BR6A
Specifications
Model BR6A

Appearance

W×H×D(㎜) 74.9×32.9×69.3
Power consumption Max. 5 VA (220 V a.c. 60 ㎐)
Input sensor Hanyoung Nux exclusive sensor (TH-570N) ※ Thermistor (-50.0 ~ 150.0 ℃)
Accuracy ±1 % of FS ±1 Digit
Control output Relay output Contact configuration: 1c, 250 V a.c. 5A (resisitive load)
(Main output) SSR 10 V d.c. min (load resistance min. 500 Ω)
Alarm / Defrost Relay Contact configuration: 1c, 250 V a.c. 5A (resisitive load)
Control operation Proportional operation (P control), ON/OFF operation
Setting method Set, increase, decrease, digital method by shift key
Other features Defrost timer, alarm function, heating/cooling dual usage
Ambient temperature & humidity 0 ~ 50 ℃, 35~85 % RH (Without condensation)
Line resistance Max. 10 Ω for 1 wire
Weight 120

Suffix code
Model Code Content
BR6A - □ □ □ □ -□ Digital Temperature Controller (Proportional control, ON/OFF control selectable by setting)
Input N Hanyoung Nux exclusive sensor (TH-570N) ※Thermistor
M Relay Contact outputs
Control output
S SSR output (Voltage pulse 12 V d.c.)
0 None (basic specifications: alarm output 1 contact)
Option
1 Communication (RS-485, MODBUS ASCII / RTU)
Power voltage P4 100-240 V a.c. 50/60 ㎐
W White LED
LED color
R Red LED

BR6
Specifications
Model BR6

Appearance

W×H×D(㎜) 77.0×35.0×70.5
Power voltage 100-240 V a.c. 50/60 ㎐, 10-24 V a.c. 50/60 Hz or 10-24 V d.c.
Power consumption Max. 5 VA (220 V a.c. 60 ㎐)
Input sensor Hanyoung Nux exclusive sensor (TH-540N) ※ Thermistor (NTC) (-40.0 ~ 90.0 ℃)
Accuracy ±1 % of FS ±1 digit
Control output Relay output Contact configuration: SPDT, 250 V a.c, 5 A (resisitive load)
(Main Output) SSR Approx. 5 V d.c. (load resistance min. 500 Ω) max. approx. 50 ㎃
Control type ON / OFF, Proportional control selectable by setting
Setting method Set, increase, decrease, digital method by key
Other features Defrost timer, alarm function, heating / cooling dual usage
Ambient temperature & humidity 0 ~ 50 ℃, 35 ~ 85 % RH (Without condensation)
Weight (g) 116

Suffix code
Model Code Content
BR6- □ □ □ □ Digital Temperature Controller (basic specifications: alarm output 1 contact)
Control type F ON/OFF, Proportional control selectable by setting
Input N Hanyoung Nux exclusive sensor (TH-540N) ※ Thermistor
M Relay
Control output
S SSR (Voltage pulse output 5 V d.c.)
P3 10-24 V a.c. 50/60 Hz or 10-24 V d.c.
Power voltage
P4 100-240 V a.c. 50/60 ㎐

48
 Temperatrue controllers

ED6
Specifications New
product
Model ED6
High
function

Appearance
Programmable
Temperature
Humidity

W×H×D(㎜) 77.0×35.0×70.5
Thermal
Power voltage 100-240 V a.c. 50/60 ㎐, 10-24 V a.c. 50/60Hz or 10-24 V d.c. shock
Test control
Power consumption 5.5 VA
Input sensor K, Pt100 Ω, 4-20 ㎃ d.c., 1-5 V d.c.
Multi-
Accuracy ± 0.5 % of FS ±1 Digit channel
Control Relay output Contact configuration: 1 c, 250 V a.c. 5 A (resisitive load)
output Economy
(Main Output) SSR Approx. 5 V d.c. (load resistance min. 500 Ω) max. approx. 50 ㎃
Ignorance
Control type Proportional control, ON/OFF control selectable by setting For freezer

Setting method Set, increase, decrease, digital method by key

Other features Sub output (alarm, defrost timer), heating / cooling dual usage Indicator

Ambient temperature & humidity 0 - 50 ℃, 35 ~ 85 % RH (Without condensation)

Weight (g) 116

Suffix code
Model Code Content
ED6 □ □ □ □ □ Digital Temperature Controller
Control type F ON/OFF, Proportional control selectable by setting
K Thermocouple K
Input P RTD Pt100 Ω (IEC751)
C 4-20 ㎃ d.c. (External resistance 250 Ω installation), 1-5 V d.c.
M Relay output
Control output
S SSR (Voltage pulse output 5 V d.c.)
A Alarm or defrost timer (Alarm or Defrost)
Power voltage
N None
P3 10-24 V a.c. 50/60Hz or 10-24 V d.c.
Power voltage
P4 100-240 V a.c. 50/60 ㎐

HD6
Specifications
Model HD6

Appearance

W×H×D(㎜) 77.0×35.0×70.5
Power voltage 100-240 V a.c. 50/60 ㎐
Power consumption Max. 2 VA
Input sensor TH-540N (103ET: -40.0 ~ 90.0 ℃, 2 m ~ 20 m)
Accuracy ±1 % + 1 Digit of display value
Control output (relay contact) OPEN OUT: 250 V a.c. 5 A, CLOSE OUT: 250 V a.c. 5 A
Control type ON/OFF control (control by temperature and time)
Setting method Digital method by FND and button
Other features Green house operation / window closing motor control output
Ambient temperature & humidity 0 ~ 50 ℃, 35 ~ 85 % RH (Without condensation)
Weight(g) 116

Suffix code
Model Code Content
HD6 □ □ □ □ Cost-Effective Digital Temperature Controller
Control type F ON/OFF control
Input N Hanyoung Nux exclusive sensor (TH-540N) ※ Thermistor
Control output M Relay
Power voltage P4 100-240 V a.c. 50/60 ㎐

49
 TEMPERATURE CONTROLLER

BK3
Specifications

Model BK3

Appearance

W×H×D(㎜) 96.0×48.0×100.2

5IFSNPDPVQMF ,
*OQVUTFOTPS
35% 1UĒ*&$

*OQVUTBNQMJOHUJNF ऱ

*OQVUEJTQMBZSFTPMVUJPO 6TVBMMZMFTTUIBOJOEJDBUJPOWBMVF˫˫

*OQVUJNQFEBODF िUIFSNPDPVQMF

"MMPXBCMFTJHOBMTPVSDFSFTJTUBODF 5IFSNPDPVQMFĒNBY

"MMPXBCMFXJSJOHSFTJTUBODF 35%ĒNBYCVUSFTJTUBODFTBNPOHXJSFTTIPVMECFTBNF

"MMPXBCMFJOQVUWPMUBHF 8JUIJOp7EDUIFSNPDPVQMF35%
pPG'4p%JHJU
%JTQMBZBDDVSBDZ
CVUJGMFTTUIBO˫XJUI3JOQVUXBSSBOUZOPUBQQMJFE
*OTVMBUJPOSFTJTUBODF .ĒNJO7ED
7BDऎGPSNJO
%JFMFDUSJDTUSFOHUI
CFUXFFOUIFEJFSFOUSFDIBSHJOHQBSU
1PXFS4VQQMZ7PMUBHF 7BDऎ%VBMVTBHF

7PMUBHFVDUVBUJPO pPGQPXFSTVQQMZWPMUBHF

1PXFSDPOTVNQUJPO 7"NBY

"NCJFOUUFNQFSBUVSF ˫

4UPSBHFUFNQFSBUVSF ˫

7JCSBUJPOSFTJTUBODF ऎ1FBLBNQMJUVEFGPSISTFBDIJO9:BOE;EJSFDUJPO

4IPDLSFTJTUBODF दFBDIJO9:BOE;EJSFDUJPOGPSUJNFT

8FJHIU H

Suffix code
Model Code Content
BK3- □ Digital Temperature Indicator
K K thermocouple
K1 (refer to the range and input code chart)
Input
P1 Resistance Temperature Detector(RTD)
P2 Pt100 Ω (refer to the range and input code chart)

Range and input code chart

Classification Code Input Range (℃)
K 0 ~ 1,300 ℃
Thermocouple K thermocouple
K1 0.0 ~ 200.0
P1 -199 ~ 600 ℃
RTD Pt100 Ω
P2 -199.9 ~ 199.9 ℃

50
 Temperatrue controllers

BK6-M
Specifications New
product
Model BK6-M
High
function

Appearance Programmable
Temperature
Humidity

Thermal
W×H×D(㎜) 72.0×36.0×87.5 shock
Test control
Input Multi Input selectable by setting
Thermocouple K, J, E, T, R, B, S, L, N, U, W, PL2
Multi-
RTD Pt 100 Ω(IEC 751), KPt 100 Ω channel

Input sampling cycle 500 ㎳

Economy
DC voltage 1-5 V d.c. (4-20 ㎷ d.c.), -10-20 ㎷ d.c., 0-100 ㎷ d.c. Ignorance
For freezer
Input impedance ● Thermocouple and DC voltage input (㎷) : min. 1 ㏁ ● DC voltage input(V) : approx. 1 ㏁
Input Allowable signal
Thermocouple (max. 100 Ω) DC voltage (max. 2 ㏀)
source resistance Indicator

Allowable wiring resistance RTD max. 10 Ω (but the resistance among 3 lines should be same)
Allowable input voltage Within ±10 V (thermocouple, RTD, DC voltage (㎷)). within ±20 V (DC voltage (V))
Input correction Correction by internal parameter
Reference contact
±2.0 ℃ (0 ~ 50 ℃)
compensation error
Thermocouple ±0.5 % of FS ±1 Digit)
RTD ±0.5 % of FS ±1 Digit)
Accuracy
DC voltage /
Performance ±0.5 % of FS ±1 Digit)
current
Insulation resistance Min. 20 ㏁ (500 V d.c.)
Dielectric strength 2,000 V a.c. 50/60 ㎐ 1 minute (Between different live parts)
Power voltage 100-240 V a.c. 50/60 ㎐
Voltage fluctuation rate ±10 % of power voltage
Power consumption Max. 4 VA
Ambient temperature & humidity 0 ~ 50 ℃, 35 ~ 85% RH (Without condensation)
Storage temperature -25 ~ 65 ℃
Weight (g) 120

Suffix code
Model Code Content
BK6-M □ Multi InputDigital Temperature Indicator
0 None
Option
1 RET (Retransmission output 4 - 20 ㎃ d.c.)

Range and input code chart

Classification Code Input Range (℃) Accuracy 비고
1 K *2 -200 ~ 1370
2 K *2 -199.9 ~ 999.9
3 J *2 -199.9 ~ 999.9
4 E *2 -199.9 ~ 999.9
5 T *2 -199.9 ~ 400.0 ±0.5 % of FS ±1 digit
6 R *2 0 ~ 1700
Thermocouple(TC) 7 B *1 0 ~ 1800 *1) 0 to 400℃ range: ±10% of FS ±1 digit
8 S 0 ~ 1700
*2) Below 0℃: ±1.0 % of FS ±1 digit
9 L *2 -199.9 ~ 900.0
10 N -200 ~ 1300 ±1.0 % of FS ±1 digit *3) -150.0 to 150.0℃ below: ±1.0% of FS ±1 digit
11 U *2 -199.9 ~ 400.0
*4) When using current input, select code number
12 W 0 ~ 2300 ±0.5 % of FS ±1 digit "30" and attach a 250 Ohm 0.1% resistance to
13 Platinel II 0 ~ 1390 the input signal terminal.
RTD 20 KPt100 Ω *3 -199.9 ~ 500.0
±0.5 % of FS ±1 digit
(RTD) 21 Pt100 Ω *3 -199.9 ~ 640.0
30 5 V d.c. 1-5 V d.c.
Voltage/Current
32 20 ㎷ d.c. 10 - 20 ㎷ d.c.
(VDC / ㎷ DC) ±0.5 % of FS ±1 digit
33 100 ㎷ d.c. 0 - 100 ㎷ d.c.
DC Current 30 20 ㎃ d.c. *4 4-20 ㎃ d.c.

51
 GRAPHIC RECORDERS

GR200A UPGRADE
Specifications
Model GR200A

5.7"

Appearance

W×H×D(㎜) 145.0×145.0×173.5
Power voltage 100 – 240 V a.c. Voltage fluctuation rate ±10 %
Power frequency 50 – 60 ㎐
Power
Power consumption 25 VA max
input
Maximum internal fuse ratings 250 V a.c.
*OTVMBUJPOSFTJTUPS 20 ㏁ between the power terminal and the FG terminal or 500 V d.c.
/VNCFSPGDIBOOFMT 2, 4, 8, 12 (Refer to the type configuration)
ӗ2 thermoresistors (Pt-100, KPt-100)
*OQVUUZQF ӗ12 thermocouples (K, J, E, T, R, B, S, L, N, U, Wre 5-26, PL-II) ӗDC voltage 4 types (-10 - 20 mV, 0 - 100 mV, 1 - 5V, 0 - 30 V)
※ The current input (4 - 20 ㎃ d.c.) is available when you use resistance 250 Ω (0.5 W / 0.1 %) on input terminals.
4BNQMJOHDZDMF 250 ㎳
$VSSFOUUPNFBTVSFUIF About 0.21 ㎃
UIFSNPSFTJTUPS35%
Sensor *OQVUSFTJTUPS Thermocouple : More than 1 ㏁, VDC : More than 1 ㏁
input ӗThermocouple : Less than 200 Ω ӗVDC : Less than 2 ㏀
"MMPXBCMFXJSJOHSFTJTUPS
ӗThermoresistor : Maximum 100 Ω/wire (The RTD is up to 10 Ω/wire for the range of -100.00 - .150.00)
*NQBDUPGUIFXJSJOHSFTJTUPS Thermoresistor : ±0.3 °C/10 Ω (The 3 lines have the same wiring resistors)
"MMPXBCMFJOQVUWPMUBHF ӗThermocouple : Less than ±10 V d.c. ӗVDC : Less than ±33 V d.c.
"DDVSBDZ ±0.15 % of F.S, ±1 digit (Except the RJC temperature error) ※ Refer to the input table
3+$UFNQFSBUVSFFSSPS ±1.5 ℃ (0 ~ 50 ℃)
4FOTPSTIPSUEFUFDUJPO#VSOPVU UP-Scale during disconnection
.BYJNVNJOQVU 
Contact *OQVUNFUIPE /PWPMUBHFDPOUBDUJOQVU
input 0O0EFUFDUJPOSFTJTUPS $POTJEFSPOMFTTUIBOाNJOJNVNBOEPGGMBSHFSUIBOा
.JOJNVNEFUFDUJPOUJNF TFDPOE
.BYJNVNOVNCFSPGPVUQVUT 
0VUQVUUZQF 3FMBZPVUQVU
Alarm
.BYJNVNSBUJOHT "7BD"7ED
output
3FDPNNFOEFESBUJOHT "7BD"7ED
3FMBZMJGF UJNFTBUUIFNBYJNVNSBUJOHTUJNFTBUUIFSFDPNNFOEFESBUJOHT
"NCJFOUUFNQFSBUVSF o$
Storage
environment 5FNQFSBUVSFDIBOHF -FTTUIBOo$I
"NCJFOUIVNJEJUZ 3)OPDPOEFOTBUJPO
"NCJFOUUFNQFSBUVSF o$
5FNQFSBUVSFDIBOHF o$IPSCFMPX
"NCJFOUIVNJEJUZ 3)OPDPOEFOTBUJPO
.BHOFUJDFME "NPSMFTT
"MUJUVEF -FTTUIBONBCPWFUIFTFBMFWFM
8FJHIU "CPVUऍ

Suffix code
Model Code Content
GR200A - □ □ □ Touch Screen Graphic Recorder
2 2 channels
4 4 channels
Input channel
8 8 channels
12 12 channels

External contact N None

input & output 1 DI 2 contacts + DO 6 contact
(DI / DO) 2 DI 4 contacts + DO 12 contacts
Communication function 1 RS 422/485 + ETHERNET

52
 Graphic recorders

RT9N
Specifications 2~12 channels
Touch panel
Model RT9N
2 channels
For recording
paper

Appearance

W×H×D(㎜) 96.0×96.0×100.0
Power voltage 100-240 V a.c. (±10 %), 50/60 Hz
Power consumption Max. 15 W, max. 20 VA
Sampling cycle 250 ㎳
● Thermocouple : K, J, E, T, R, S, B, L, N, U, WRe 5 - 26, PL-Ⅱ ● RTD : Pt 100 Ω, KSPt 100 Ω
Input
● DC voltage : 1-5 V d.c., 0-10Vd.c., -10-20 ㎷ d.c., 0-100 ㎷ d.c. (freescale type)
Input display resolution Basically below the decimal point of the measuring range table
Input impedance Thermocouple and DC voltage input (㎷): min. 1 ㏁. DC voltage input(V): approx. 1 ㏁
Alarm Relay output (AL1,AL2)
Allowable signal source resistance Thermocouple (max. 250 Ω). DC voltage (max. 2 ㏀)
Allowable wiring resistance RTD max. 10 Ω. (but the resistance among 3 lines should be same)
Allowable input voltage Within ±10 V (thermocouple,RTD,DC voltage (㎷)) Within ± 20 V (DC voltage (V)).
Noise removal rate NMRR (normal mode): 40 dB min , CMRR (common mode): 120 dB min (50/60 ㎐ ±1 %)
Applicable standard Thermocouple/RTD (KS/IEC 751/DIN)
Reference contact compensation error ±1.5 ℃ (15 ~ 35 ℃ 사이), ±2.0 ℃ (0 ~ 50 ℃ range)
Accuracy Indication and record accuracy: ±0.5 % (Full Scale)

● Recording paper check: If there is no recording paper, the P-END lamp on the front display window lights and recording stops
● Printing method: 203 dpi (8.0 dots/㎜) 384 dots per line ● Recording paper speed: (20, 30, 60, 120, 180, 300, 600, 900) ㎜/h
Record
● Measurement point: 1 contact ● Response time: varies according to recording speed ● Recording method: Thermal line
● Recording paper: width 57.5 ㎜, length approx. 16 m

Suffix code
Model Code Content
RT9N- □ □ □ 2-Channel Temperature Controller/Recorder
0 Temperature recorder only
Control type
1 Temperature recorder and controller
Number of 1 1 channel
channels 2 2 channel
0 None (AL1 built-in)
1 AL2
Option 1-Channel type only
2 AL2, RS485 communication
3 RS485 communication

Range and input code chart

Indication
Classification NO. Input type Range (℃) Accuracy 비고
Symbols
1 K *2 -200 ~ 1370
2 K *2 -199.9 ~ 999.9
Caution
Measurement Input Wiring
3 J *2 -199.9 ~ 999.9 ±0.5% of FS - Disconnect the regulator body and external
4 E *2 -199.9 ~ 999.9 ±1 digit supply power when wiring the measurement
input lines.
5 T *2 -199.9 ~ 400.0 - Pay attention to the polarity of the input and
6 R *2 0 ~ 1700 connect the input signal between the power
Thermocouple circuit and the ground circuit.
7 B *1 0 ~ 1800 ±0.5% of FS
(TC) - Please use SHIELD-treated wiring for the input
8 S 0 ~ 1700 ±1 digit and ground SHIELD to 1 point.
9 L *2 -199.9 ~ 900.0 ±0.5% of FS ±1 digit
Digit is the minimum display
10 N -200 ~ 1300 ±1.0% of FS ±1 digit *1) 0 ~ 400 ℃ range : ±10 % of F.S ±1 digit
11 U *2 -199.9 ~ 400.0 *2) Max. 0 ℃ : ±1.0 % of F.S ±1 digit
*3) -150.0 ~ 150.0 ℃ range : ±1.0 % of F.S ±1 digit
12 W 0 ~ 2300 *4) When using current input, select code
13 PlatinelⅡ 0 ~ 1390 number "30" and attach a 250 Ohm 0.1%
resistance to the input signal terminal.
20 KSPt100 Ω *3 -199.9 ~ 500.0
RTD
21 Pt100 Ω *3 -199.9 ~ 640.0 ±0.5% of FS FS from the minimum to the maximum of each
30 1-5 V d.c. ±1 digit range measurable range.
31 0-10 V d.c. Scaling range
Direct voltage When selecting the input type, the selection
SL-L : -1999
(VDC/mV DC) 32 -10 - 20 m V d.c. number is set in the value display window
SL-H : 9999
(SV). However, do not set a number that does
33 0-100 m V d.c.
not have an input signal selection number.
Direct current 30 4-20 mA d.c. *4 4-20 mA d.c.

53
 DIGITAL COUNTER/TIMERS
LC series
Specifications
NEW

Model LC6 LC4 LC3 LC7

Appearance

W×H×D(㎜) 72.0×36.0×84.1 48.0×48.0×79.5 96.0×48.0×71.1 72.0×72.0×92.9

Power voltage 100-240 V a.c. 50/60 ㎐, 24-48 V a.c. 50/60 Hz or 24-48 V d.c. (Voltage fluctuation rate: ±10 %)
Power consumption • 2-stage setting: max. 12 VA. • 1-stage setting: max. 11 VA
6-digit: counting unit (10.8 ㎜),
Counting unit (10.5 ㎜), setting unit (8 ㎜) Counting unit (14.5 ㎜), Counting unit (17.2 ㎜),
Character height Setting unit (6.7 ㎜) 4- digit: counting unit (14 ㎜), Setting unit (10 ㎜) Setting unit (12.5 ㎜)
setting unit (8.5 ㎜)
Maximum counting speed 1 CPS / 30 CPS / 1 KCPS / 10 KCPS
Power outage compensation 10 years (using non-volatile memory)
● Selection of input method by external switch (voltage input / non-voltage input) ● Counter : composed of CP1, CP2, RESET, BATCH-RESET
● Voltage input : HIGH level (5 – 30 V d.c.), LOW level (0 – 2 V d.c.), input resistance (about 4.5 ㏀)
Input
● Timer : composed of START, INHIBIT, RESET
● Non-voltage input : impedance during short-circuit (max. 1 ㏀), residual voltage during short-circuit (max. 2 V d.c.)
Minimum input signal time 1 ㎳ / 20 ㎳ (START, INHIBIT, RESET inputs)
External power supply Max. 12 V d.c. 100 ㎃
ONE SHOT output 0.01 ~ 99.99 SEC
1-Stage setting OUT (SPST, 1a) OUT (SPDT, 1c) OUT (SPDT, 1c)
Contect 2-Stage setting OUT1 (SPST, 1a), OUT2 (SPDT, 1c) * OUT2 of LC6-P62C: SPST configuration
Control Capacity • SPDT: NC (250 V a.c. 5A), NO (250 V a.c. 2A) • SPST: 250Va.c. 5A, resisitive load
output 1-Stage setting NPN circuits (OUT, BAT.O) * LC4-P61C/P41C models NPN 1 circuit configuration
Contectless 2-Stage setting - NPN 2 circuits (OUT1, OUT2) NPN 2 circuits (OUT1, OUT2)
Capacity Open collector, 30 V d.c. 100 ㎃ max
Timer operation error Power star t: max. ±0.01 % ±0.05 sec, Reset start : max. ±0.01 % ± 0.03 sec
● Protocol : Modbus-RTU ● Communication type : RS485 (2-Wire half-duplex)
● Synchronization: Asynchronous ● Effective distance : Max. within 800 m
● Max. connections : 31 (Address:1 ~ 127) ● Response waiting time : 5 ~ 99 ㎳
Communication
● Start bit : 1 bit (Fixed) ● Stop bit : 1 bit (Fixed)
● Data bit : 8 bit ● Parity bit : None / Odd / Even
● Communication speed : 2,400 / 4,800 / 9,600 / 19,200 / 38,400 bps
Insulation Resistance Min. 100 ㏁ (500 V d.c.) conductive terminal - unfilled metal
Dielectric strength 2,000 V a.c. 60 Hz for 1 min (Different live part terminals)
Noise immunity Square-wave noise by noise simulator (1 ㎲ pulse every 16 ㎳), ±2000 V (pulse width 1 ㎲)
Vibration resistance 10 - 55 ㎐, single amplitude 0.5 ㎜, 3-axis each direction, 2 h
Electrical Min. 50,000 times
Relay life
Mechanical Min. 10 million times
Degree of protection IP66 (IEC 60529) (Product front)
Storage temperature -20 ~ 65 ℃
Ambient temperature & -10 ~ 55 ℃, 35 ~ 85 ％ RH (Without condensation)
humidity
Certified
Weight (g) 196 140 143 222

Suffix code
Model Code Content
LC □ □ □ □ □ □ LCD Counter / Timer
3 96(W) × 48(H) ㎜
4 48(W) × 48(H) ㎜
Appearance
6 72(W) × 36(H) ㎜
7 72(W) × 72(H) ㎜
Type P Preset Counter / Timer
4 4 Digit display (9999) ※ LC4 only
Display digits
6 6 digit display (999999)
1 1 Stage setting
Setting stages
2 2 Stage setting
N No sub output
Sub output
C RS485 (MODBUS-RTU)
A 100-240 V a.c. 50/60 ㎐
Power voltage
D 24-48 V a.c. 50/60 Hz or 24-48 V d.c.

54
 Digital Counter/Timers

GF series UPGRADE
Specifications New product
Count/Timer
Model GF7A GF4A GF4A－□□□S
Small LCD
counter

Appearance Digital
Counter/
Timer

New product
W×H×D(㎜) 72.0×72.0×75.0 48.0×48.0×79.8 48.0×48.0×63.3 Timer

Power supply voltage 100 - 240 V a.c. 50/60 Hz (Voltage fluctuation rate : ± 10 %)
• P62 (7.6 VA), P61 (6.6 VA) Small LCD
• P41 (6.4 VA) • P41S (5.9 VA) Timer
Power Consumption • T6 (5.6 VA)
T4 (5.6 VA) • T4S (5.4 VA)
• P42 (7.3 VA), P41 (6.6 VA)
Display method White 7 segment LED Digital
Twin Timer
• P62/P61/T6 (11.5 X 5.2 mm)
Character size 8.5 X 5.0 mm
• P42/P41 (13.6 X 7.8 mm)
Counting speed 1 / 30 / 1k / 5k cps 30 / 5k cps Digital
Timer
Blackout compensation 10 Years (nonvolatile memory used)
Return time 500 ms or less
Weekly/
Timer operation error Power start : ± 0.01 % ± 0.05 seconds or less (ratio to setting value) yearly
Time switch
ӗInput method selection by external switch (voltage input / no－voltage input)
ӗCounter (composed of CP1, CP2, RESET), timer (composed of INHIBIT, RESET)
Input Timing
ӗVoltage input : HIGH level (5 V － 30 V d.c.), LOW level (0 V － 2 V d.c.), input resistance (about 4.7 kΩ) Relay
ӗNo－voltage input : Impedance in case of short circuit (1 kΩ or less), residual voltage in case of short－circuit (2 V d.c. or less)
Min. input signal time 20 ms or more (RESET, INHIBIT input) Analog
ON-Delay
One-shot 1st stage 0.5 seconds fixed － － Timer

output time 2st stage 0.05 to 5.8 seconds

Analog
Twin/Dual
External power supply 12 V d.c. 100 ㎃ max. Timer

1st stage OUT (SPDT, 1c) OUT2 (SPST, 1a)

Analog
OUT1 (SPDT, 1c), Multi
Contact 2st stage － Timer
OUT2 (SPDT, 1c)
Control Capacity SPDT : NC (250 V a.c. 2 A, 250 V a.c. 5 A), NO (250 V a.c. 5 A), Resistance load 250 V a.c. 5 A Resistance load
Star-delta
output 1st stage OUT (NPN Open collector) － Timer

Non- OUT1, OUT2

2st stage －
contact (NPN 2 open collector circuits)
Capacity 30 V d.c. 100 ㎃ max.
Relay life Electrical (more than 50,000 times), Mechanical (more than 10 million times)
Insulation Resistance 100 MΩ or more (based on 500 V d.c. mega)
Dielectric strength 2,000 V a.c. 60 Hz 1 minute (between the conductive part terminal and the case)
Noise resistance Square wave noise by noise simulator ±2,000 V (Pulse width 1 ㎲)
• Durability : 10 － 55 Hz (1 minute cycle), Double amplitude 0.75 mm, X ・ Y ・ Z 2 hours each direction
Vibration
• Malfunction : 10 － 55 Hz (1 minute cycle), Double amplitude 0.5 mm, X ・ Y ・ Z 10 minutes each direction

Ambient temperature and humidity －10 ~ 55 ℃, 35 ~ 85 ％ R.H.

Storage temperature －20 ~ 65 ℃
• T6 : 150 g • T4 : 100 g • T4S : 84 g
Weight (g) • P41 : 184 g • P42 : 190 g • P41 : 108 g • P41S : 92 g
• P61 : 180 g • P62 : 198 g

Suffix code
Model Code Description
GF □- □ □ □ □ Digital counter/timer
4A 48(W) X 48(H) mm
Appearance
7A 72(W) X 72(H) mm
P Preset counter/timer
Model
T Total counter/timer
6 6 Digit-display ( 999999 ) ※ GF7A model only
Display digits
4 4 Digit-display ( 9999 )
2 2－Stage output ※ GF7A model only
Control output 1 1－Stage output
－ No output (Display only)
S 8 Pin plug ※ GF4A model only
Terminal structure
－ Terminal

55
 DIGITAL COUNTER/TIMERS
LC1
Specifications
Model LC1 LC1-F

Appearance

W×H×D(㎜) 48.0×24.0×54.0
Input type Non voltage input (no indication) Voltage input (24 - 240 V a.c., 6 - 240 V d.c.)
Power voltage Lithium battery built-in
Input operation Up Count
Counting speed 1/30/100/ 1K cps 20 cps
● Residual voltage when it breaks : 0.7 V
●HIGH : 24 - 240Va.c. / 6 - 240 V d.c.
Input conditions ● Max. impedance when it breaks: max. 10 ㏀
●LOW : 0 - 2 V a.c./DC
● Min impedance when it opens: min. 1 ㏁
Input type Non-voltage input
Reset
Minimum signal width Min. 20 ㎳
Battery life More than 7 years (approx. 25 ℃) ※ this is calculated value so it is not certified value (replacing cycle reference value)
●SW1 : Internal battery ON/OFF, front reset key selectable
External setting switch SW1 : Internal battery ON/OFF, front reset key selectable
●SW2 : Count speed selectable
External connection Terminal Blocks (4P)
Display method 7 Segment LCD (character height: 8.7 ㎜)
Display digits 8 Digits
Insulation resistance Min. 100 ㏁ (500 V d.c), conductive terminal - unfilled metal
Dielectric strength 2000 V a.c. 50/60 ㎐ for 1 min (conductive terminal - unfilled metal)
Vibration resistance 10 - 55 ㎐, Double amplitude 0.75 ㎜, 3 axes each direction, 2h
Shock resistance 300 ㎨, 3 Axes each direction each 3 times
Ambient temperature & humidity -10 ~ 55 ℃ / 35 ~ 85 % RH (Without condensation)
Storage temperature -25 ~ 65 ℃
Degree of protection IP66 (IEC 60529) (Front side)
Weight (g) 58

LT1
Specifications
Model LT1 LT1-F

Appearance

W×H×D(㎜) 48.0×24.0×54.0
Input type Non-voltage input (no display) Voltage input (24-240 V a.c. / 6-240 V d.c.)
Power voltage Lithium battery built-in
Operation type UP Timer
Time display 9999 h 59 m 59 s / 99999 h 59.9 m / 999999 h 59 m / 9999999.9 h
Time accuracy ± 0.01 %
● Residual voltage when breaks : 0.7 V
● HIGH : 24-240 V a.c./6-240 V d.c.
Input conditions ● Max. impedance when breaks: max. 10 ㏀
●L OW : 0-2 V a.c./0-2.4 V d.c.
● Min impedance when opens: min. 1 ㏁
Battery life More than 10 years (approx. 25 ℃) ※ This is calculated value so it is not certified value (Replacing cycle reference value)
External setting switch ●SW1 : Internal battery ON/OFF, front reset key selectable ●SW2 : Time range selection
External connection Terminal Blocks (4P)
Display method 7 Segment LCD (Character height : 8.7 ㎜)
Display digits 8 Digits
Insulation resistance Min. 100 ㏁ (500 V d.c). conductive terminal - unfilled metal
Dielectric strength 2000 V a.c. 50/60 ㎐ for 1 min (Conductive terminal - unfilled metal)
Vibration resistance 10 - 55 ㎐, double amplitude 0.75 ㎜, 3 axes each direction, 2h
Shock resistance 300 ㎨, 3 axes each direction each 3 times
Ambient temperature & humidity -10 ~ 55 ℃ / 35 ~ 85 % RH (Without condensation)
Storage temperature -20 ~ 65 ℃
Degree of protection IP66 (IEC 60529) (Front side)
Weight (g) 58

56
 Digital Counter/Timers

LT4 series
Specifications
NEW
New product
Count/Timer
Model LT4 (Socket type) LT4S (Socket type)
Small LCD
counter

Digital
Counter/
Appearance Timer

New product
Timer

Small LCD
W×H×D(㎜) 48.0×48.0×65.7 Timer

Power voltage 24-240 V a.c. 50/60 Hz, 24-240 V d.c. Combined

Allowable voltage fluctuation Digital
±10% of power voltage Twin Timer
rate
Max. 4 VA (24 - 240 V a.c. 50/60 ㎐) Max. 4.5 VA (24 - 240 V a.c. 50/60 ㎐)
Power consumption
Max. 1.6 W (24 - 240 V d.c.) Max. 2 W (24 - 240 V d.c.) Digital
Timer
Display method Wide viewing angle negative LCD display

Display mode Up display and down display Weekly/

yearly
Time switch
Display digits 4 Digits

Character height PV display : 14mm, SV display : 8.5mm Timing

Relay
Return time Max. 100 ms

External connection Socket 8-pin Analog

ON-Delay
Timer
Operating time range 0.01 sec ~ 9999 hour

Input signal - START, INHIBIT, RESET Analog

Twin/Dual
Timer
● Non-voltage input
External
input ● Impedance during short-circuit: max. 1 kΩ Analog
Input method - Multi
● Voltage during short-circuit: max. 0.5 V Timer
● Impedance during open: min. 100 kΩ
Star-delta
START, INHIBIT, Timer
Minimum input time -
RESET minimum input signal width 1 ms / 20ms selection

Operating time error Power START : max. ± 0.01 % ±0.05 sec., Signal START : max. ± 0.005 % ±0.03 sec.
SOND / SFKF / SINT / SNFN / SNFF / SOFD / S.OND / S.FKN / S.INT /
Operation mode POND / PFKF / PFKN / PINT / TWON / TWOF / S-D
S.ODR
Control
output Contact configuration Time limit 2c, instantaneous 1c + time limit 1c Time limit 1c

Contact capacity 250 V a.c. 3A resistive load (NO : 5A, NC : 3A) 250 V a.c. 5A resistive load

Relay life ● Mechanical life: min. 10 million times ● Electrical life: min. 100,000 times (250 V a.c. 5A resisitive load)

Insulation Resistance Min. 100 MΩ (500 V d.c. Mega standard, conductive terminal - exposed unfilled metal part)

Dielectric strength 2000 V a.c. 60 Hz for 1 min (Conductive terminal - exposed unfilled metal part)

Noise immunity ± 2 kV (among operation power terminals, pulse width = 1 us, square wave noise by noise simulator)

Vibration resistance 10 - 55 ㎐ (for 1 min) single amplitude 0.5 mm X, Y, Z each direction 2 hours

Shock resistance 300 ㎨ (30G) X, Y, Z Each direction 3 times

Degree of protection IP66 (IEC 60529) (Product front)

Ambient temperature &
-10 ~ 55 ℃, 35 ~ 85 % RH (However, there will be no condensation.)
humidity
Storage temperature -25 ~ 65 ℃

Certified

Weight (g) 86 84

Suffix code
Model Code Content
LT4 □ LCD Timer

Time limit 2c, time limit 1c + instantaneous 1c

Control output
S Time limit 1c

57
 DIGITAL COUNTER/TIMERS
TT SERIES
Specifications
Model TT7H TT4-P42A TT4-P42B

Appearance

W×H×D(㎜) 72.0×72.0×63.0 48.0×48.0×87.0 48.0×48.0×87.0

Power voltage 220 V a.c. 60Hz 100-240 V a.c. 50/60 ㎐

Allowable voltage fluctuation rate ±10% of power voltage

Power consumption Approx. 9.6 VA (with 220 V a.c. 60 ㎐) Max. 9.1 VA (220 V a.c. 60 ㎐)
ON Time display window:
Red FND 4 digits (Character height: 18.7 ㎜)
Display method PV : Character height 11 ㎜, SV : Character height 8 ㎜
OFF Time display window:
Red FND 4 digits (Character height: 14.5 ㎜)
External connection method Terminal 11-Pin socket 8-Pin socket

Minimum signal time START: min. 1s START: min. 20 ㎳ (RST / INH) -

Control Contact configuration Output: time limit SPDT (1c) Output A: time limit SPDT (1c), output B: time limit SPDT (1c)
output Contact capacity ● NO : 250 V a.c. 5 A (Resisitive load) ● NC : 250 V a.c. 2 A (Resisitive load)

Mechanical Min. 10 million times

Relay life
Electrical Min. 100,000 times (250 V a.c. 3A resisitive load)

Dielectric strength 2,000 V a.c. 50/60 Hz for 1 min

Noise immunity ±2 kV (Between operation power terminals), square wave noise by noise simulator (pulse width = 1㎲)

Insulation Resistance Insulation Resistance

Vibration resistance 10 - 55 Hz (1 Minute cycle), peak amplitude 0.75 ㎜ X・Y・Z each direction 1 hour

Shock resistance 300 ㎨, X・Y・Z each direction 3 times

Ambient temperature & humidity -10 ~ 55 °C, 30 ~ 85 % RH (without condensation)

Storage temperature -20 ~ 65 °C

Weight (g) 300 108

Suffix code
■ TT7H
Model Code Content
TT7H- □ □ □ □ Digital Twin Timer
Settings P Preset method
Display digits 4 4 Digit display (9999)
Control output 1 1-Stage output
External connection A 9-Pin terminal type (external input)

■ TT4
Model Code Content
TT4 □ □ □ □ Digital Dual Timer
Settings P Preset method
Display digits 4 4 Digit display (9999)
Control output 2 2-Stage output
A 11-Pin socket type
External connection
B 8-Pin socket type

58
 Digital Counter/Timers

TF4A UPGRADE
Specifications New product
Count/Timer

Model TF4A-A
Small LCD
counter

Digital
Counter/
Timer
Appearance

New product
Timer

Small LCD
Power voltage 100 - 240 V a.c. 50/60 Hz Timer

Voltage fluctuation rate Power voltage ±10 %

Digital
Power consumption 3.2 VA Twin Timer

Display White 7 segments LED

Digital
Character size Character height (8.5 mm), Character width (5.0 mm) Timer

Timer operation Power On Start

Weekly/
Return time 500 ms max. yearly
Time switch

Timer operation error ● Power start : ± 0.01 % ± 0.05 seconds or less ● Reset start : ± 0.01 % ± 0.03 seconds or less
Timing
Relay
● Input method selection by external switch (Voltage input / No voltage input)
● RESET, INHIBIT Composed of input
Input Analog
● Voltage input : HIGH level (5 V - 30 V d.c.), LOW level (0 V - 2 V d.c.), Input resistance (Approx. 4.7 kΩ) ON-Delay
● No voltage input : Impedance in case of short circuit (1 kΩ below), Residual voltage in case of short circuit (2 V d.c. below) Timer

Input signal time 20 ms below (RESET, INHIBIT input) Analog

Twin/Dual
Timer
Control output • Time limit 1c (SPDT) • SPDT : NC (250 V a.c. 2 A), NO (250 V a.c. 5 A), Resistance load

Relay life time Electrical (more than 50,000 times), Mechanical (more than 10 million times) Analog
Multi
Timer
External connection method 8－pin socket

Insulation resistance 100 MΩ or more (500 V d.c. Mega standard) Star-delta

Timer
Dielectric strength 2,000 V a.c. 60 Hz 1 minute (Between the conductive part terminal and the case)

Noise immunity Square wave noise by noise simulator ± 2,000 V (Pulse width 1 us)

● Durability : 10 - 55 Hz (1 minute cycle), Double amplitude 0.75 mm, X ・ Y ・ Z 2 hours each direction
Vibration
● Malfunction : 10 - 55 Hz (1 minute cycle), Double amplitude 0.5 mm, X ・ Y ・ Z 10 minutes each direction

Ambient temperature &humidity －10 ~ 55 ℃, 35 ~ 85 ％ R.H.

Storage temperature －20 ~ 65 ℃

Weight (g) Approx. 92 g

Suffix code
Model Code Content
TF4A- □- Digital Timer, 48(W) X 48(H) mm

Time Specifications A 100 － 240 V a.c. 50/60 Hz

59
 DIGITAL COUNTER/TIMERS
LF4N
Specifications
Model LF4N-A LF4N-B LF4N-C LF4N-D

Appearance

W×H×D(㎜) 48.0×48.0×69.5

Input signal Reset, start, inhibit. ※ LF4N-A and LF4N-D only.

Paragraph level (during transistor ON): residual voltage max. 0.7 V d.c., impedance max. 2 ㏀
Input Non-voltage input
Open level (during transistor OFF): impedance min. 100 kΩ

Contact input Use a contact that can open and close 5 V d.c., 2 ㎂ sufficiently

Repetition accuracy ● Max. ±0.01 % ±0.05 s of set value (power start), ● Max. ±0.005 % ±0.03 s of set value (start signal)

Return time Max. 0.1 s

Performance Noise immunity Square wave noise by noise simulator (1 ㎲ pulse width), ±2 ㎸ (between operation power terminals)

Insulation resistance Min. 100 ㏁ (500 V d.c.) conductive terminal - unfilled metal

Dielectric strength 2000 V a.c. 60 ㎐ for 1 min (different live part terminals)
Operating mode 10 types (selection by front digital switch)
Output operation mode
but LF4N-B, LF4N-C (A mode: POWER ON delay fixed)
Time display method Set by internal UP / Down selection switch

Time range Time range 10 types (selection by front digital switch)

Function and
output Set value recognition Constant recognition (setting can be changed even during energization)

SPDT (1c), 250 V a.c. 3A, resisitive load

Control output
Time limit 1c Time limit 1c, instantaneous 1c Time limit 1c × 2 Time limit 1c

Applicable socket 8-Pin socket 11-Pin socket

Power voltage 24-240 V a.c. 50/60 Hz or 24-240 V d.c. (Universal)

Voltage fluctuation rate ±10% of power voltage

Power 240Va.c. Approx. 2.5 VA Approx. 2.9 VA Approx. 2.5 VA

consumption 240Vd.c. Approx. 1.5 W Approx. 2.1 W Approx. 1.5 W

Ambient temperature & humidity -10 ~ 55 ℃, 35 ~ 85 % RH (Without condensation)

Storage temperature -20 ~ 65 ℃

Vibration resistance 10 - 55 ㎐, Double amplitude 0.75 ㎜, 3 axes each direction, 2 h

Shock resistance 300 ㎨, 3 axes each direction each 3 times

Weight (g) 80 86 82

Suffix code
Model Code Content
LF4N- □ LCD Timer

A Time limit 1c Operating mode (10 types)

Types B Time limit 1c, instantaneous 1c 8-Pin socket type

ON delay output (A mode fixed)
selection C Time limit 2c

D Time limit 1c Operating mode (10 types) 11-Pin socket type

Power voltage 24-240 V a.c. 50/60 Hz or 24-240 V d.c. (Common)

60
 Digital Counter/Timers

LY series
Specifications New product
Count/Timer
Model LY4 LY7
Small LCD
counter

Digital
Counter/
Appearance Timer

New product
Timer

Small LCD
W×H×D(㎜) 48.0×48.0×59.8 72.0×72.0×56.0 Timer

Power voltage 100-240 V a.c. 50/60Hz (Universal)

Digital
Allowable voltage fluctuation rate ±10 % of power voltage Twin Timer

Power consumption Approx. 2.6 VA(220 V a.c. 60Hz) Approx. 4.2 VA (220 V a.c.. 60 Hz)
Digital
LCD Display method (display digits: 4 digits 2 lines) LLCD Display method (Display digits: 4 digits 2 lines) Timer
Display method 1st display: character height 7.8 ㎜, 1st display: character height 12 ㎜,
2nd display: character height 5.2 ㎜ 2nd display: character height 7 ㎜ Weekly/
yearly
1 cycle time ● During weekly setting: 1 week (7 Days) ● Yearly setting: for 1 year (Calendar until 2099 built-in) Time switch

Power outage compensation time More than 5 consecutive years (25℃)

Timing
Relay
Number of program steps Weekly program: 64 steps, yearly program: 32 Steps

Setting steps Number of season settings 4 Seasons (Spring, Summer, Fall, Winter) Analog
ON-Delay
Number of holiday settings 16 Times Timer

Installation structure (external connection) Flush panel mount type, and exposed panel mount type (dual usage) Din rail installation and screw fixing Analog
Twin/Dual
Cycle error ±15 Sec/month (25℃) Timer

Time error ±0.01% max. ±0.05 sec (setting error, voltage error, temperature error ) Analog
Multi
Contact configuration OUT : SPST (1a) 2 Independent circuits. OUT1 : SPDT (1c), OUT2 : SPDT (1c) Timer

Control Contact capacity 15 A 250 V a.c. (Resisitive load)

Star-delta
output Mechanical life Min. 10 million times
Timer

Electrical life Min. 50,000 times (250 V a.c. 15 A resisitive load)

Insulation Resistance Min. 100 ㏁ (500 V d.c. Mega standard, conductive terminal - exposed unfilled metal part)

Dielectric strength 2000 V a.c. 50/60 ㎐ for 1 min (Conductive terminal - exposed unfilled metal part)

Noise immunity ±2 kV(Among operation power terminals), square wave noise by noise simulator (pulse width= 1 μs)

Vibration resistance 10 - 55 Hz (1 minute cycle) double amplitude 0.75 ㎜ X・Y・Z each direction 1 hour

Shock resistance 300 ㎨ X・Y・Z each direction 3 times

Ambient temperature & humidity -10 ~ 55 ℃, 35 ~ 85 % RH (without condensation)

Storage temperature -20 ~ 65 ℃

Weight (g) 100 275

Suffix code
Model Code Content
LY- □ LCD Weekly, Yearly Time Switch

4 48(W) X 48(H) ㎜
Appearance
7 72(W) X 72(H) ㎜

Power voltage 100-240 V a.c. 50/60 Hz(Common)

61
 ANALOG TIMERS

T21
Specifications
AC T21 - 1 / 3 / 6 / 3H - 4A20
Model
DC T21 - 1 / 3 / 6 / 3H - 4D24

Appearance

AC 100-120 V a.c. 50/60 Hz, 200-230 V a.c. 50/60 Hz

Power voltage
DC 24 V d.c.

Allowable voltage fluctuation rate ±10% of power voltage

Power AC Max. 3.1 VA (230 V a.c. 60 ㎐)

consumption DC Max. 1.5 W (24 V d.c.)

Return time Max. 100 ㎳

1 0.1 sec ~ 10 min

3 0.3 sec ~ 30 min

Time range
6 0.6 sec ~ 60 min

3H 0.3 hrs ~ 24 hrs

Time error (Repetition error) ±1 % max. (ratio of maximum scale)

Time error (Setting error) ±10 % max. (ratio of maximum scale)

Operation mode Power ON delay, interval, flicker OFF start, flicker ON start
Control
Contact configuration 4a4b
output
Contact capacity 240 V a.c. 3A Resisitive load

Relay life ● Mechanical life : min. 10 million times, ● Electrical life : min. 100,000 times

Insulation resistance Min. 100 ㏁ (500 V d.c. standard, conductive terminal - exposed unfilled metal part)

Dielectric strength 2000 V a.c. 50/60 ㎐ for 1 min (conductive terminal - exposed unfilled metal part)

Noise immunity ±2 kV (among operation power terminals, Pulse width ±1 ㎲, square wave noise by noise simulator)

Vibration resistance 10 - 55 Hz (For 1 min) double amplitude 0.75 ㎜ X・Y・ Z each direction 1 hour

Shock resistance 300 ㎨ X・Y・ Z each direction 3 times

Ambient temperature & humidity - 10 ~ 50 ℃, 35 ~ 85 % RH (Without condensation)

Storage temperature - 25 ~ 65 ℃

Weight (g) 42

Suffix code
Model Code Content
T21- □ □ □ Timing Relay

1 1 sec, 10 sec, 1 min, 10 min

3 3 sec, 30 sec, 3 min, 30 min

Time range Selection by side dip switch
6 6 sec, 60 sec, 6 min, 60 min

3H 3 hrs, 6 hrs, 12 hrs, 24 hrs

Contact configuration 4 4a4b

A20 200-230 V a.c.

Power voltage D24 24 V d.c.

A10 100-120 V a.c.

62
 Analog Timers

T38N, T48N, T57N

Specifications New product
Count/Timer

Exposed type T57NE

Model T38N T48N
Panel type T57NP Small LCD
counter

Digital
Counter/
Appearance Timer

New product
Timer
● Exposed type : 50.0×70.0×86.2
W×H×D (㎜) 40.5×50.5×74.0 48.0×48.0×78.7
● Panel type : 57.5×84.4×83.7
Small LCD
Functions Power On Delay Timer Timer

Power voltage 24-240 V a.c. 50/60 Hz, 24-240 V d.c., 12Vd.c. (Order-made for T48N)
Voltage fluctuation rate ±10 % of power voltage Digital
Twin Timer
Power consumption Max. approx. 4.5 VA (240 V a.c. 60 ㎐) ● Max. approx. 1.5 W (24 V d.c.)
Return time Max. 100 ㎳
Digital
01 0.01 ~ 1 s / 0.01 ~ 1 m / 0.01 ~ 1 h Timer

03 0.01 ~ 3 s / 0.01 ~ 3 m / 0.01 ~ 3 h

Weekly/
06 0.01 ~ 6 s / 0.01 ~ 6 m / 0.01 ~ 6 h yearly
Time Time switch
10 0.01 ~ 10 s / 0.01 ~ 10 m / 0.01 ~ 10 h
range
30 0.01 ~ 30 s / 0.01 ~ 30 m / 0.01 ~ 30 h
Timing
60 0.01 ~ 60 s / 0.01 ~ 60 m / 0.01 ~ 60 h Relay

12H 0.01 ~ 12 h / 0.01 ~ 24 h / 0.01~ 48 h (‘24h’ and ‘48h’ time setting ‘12h’ : ‘×2’ and ‘×4‘)
Analog
Repeating error Max. ±0.3 % (ratio of maximum scale) ON-Delay
Time error Timer
Setting error Max. ±5 % (ratio of maximum scale)
Output mode POWER ON DELAY Analog
Twin/Dual
Control output Contact configuration A output (time limit 1c + instantaneous 1a) / B output (time limit 1c + instantaneous 1c) / C output (time limit 2c) Timer
Contact capacity 250 V a.c. 3 A (Resisitive load)
Analog
Relay life ● Mechanical life : min. 10 million times ● Electrical life : min. 100,000 times Multi
Timer
Dielectric strength 2,000 V a.c. 50/60 ㎐ For 1 min
Noise immunity ±2 kV (among operation power terminals), square wave noise by noise simulator (pulse width:1 ㎲)
Star-delta
Insulation resistance Min. 100 ㏁ (500 V d.c Mega standard) Timer

Vibration resistance 10 - 55 ㎐ (For 1 min) double amplitude 0.5 ㎜ X・Y・Z each direction 2 hours
Shock resistance 300 ㎨ (30 G) X・Y・Z each direction 3 times
Ambient temperature & humidity -10 ~ 55 ℃, 30 ~ 85 % RH (Without condensation)
Storage temperature -25 ~ 65 ℃
Weight (g) 150

Suffix code
Model Code Content
□- □ □ □ □ □ Analog Timer
T38N 40(W) X 50(H) ㎜
Appearance
T48N 48(W) X 48(H) ㎜
T57N 58(W) X 84(H) ㎜
P Panel type (T38N panel adapter sold separately)
Installation structure
E Exposed type (select with T48N panel type)
01 1 sec, 1 min, 1 hour
03 3 sec, 3 min, 3 hour
06 6 sec, 6 min, 6 hour
Range
10 10 sec, 10 min, 10 hour
(Dip switch selection)
30 30 sec, 30 min, 30 hour
60 60 sec, 60 min, 60 hour
12 12 hour, 24 hour, 48 hour
A Time limit: 1c contact, instantaneous: 1a contact
Control output B Time limit: 1c contact, instantaneous: 1c contact
C Time limit 2c contact
24-240 V a.c. 50/60 Hz or 24-240 V d.c. (Common)
Power voltage
12 12 V d.c. (Only for T48N, order-made)
On-Delay
Output operation
S Interval (Order-made)
※ The installation type is only applied to the T57N, TF62N and TF62D (T38N model requires the separate purchase of panel adapter)

63
 ANALOG TIMERS

TF62N/62D
Specifications
Exposed type TF62NE TF62DE
Model
Panel type TF62NP TF62DP

Appearance

● Exposed type : 50.0×62.0×91.2 ● Exposed type : 50.0×77.0×91.2

W×H×D (㎜)
● Panel type : 57.5×84.5×83.7 ● Panel type : 57.5×84.4×83.7
Functions Twin timer Dual timer
Power voltage 24-240 V a.c. 50/60Hz or 24-240 V d.c. (Common)
Voltage fluctuation rate ±10 % of power voltage
Power consumption ● Max. approx. 4.5 VA (240 V a.c. 60 ㎐) , ● Max. approx. 1.5 W (24 V d.c.)
Return time Max. 100 ㎳
01 0.01 ~ 1 s / 0.01 ~ 1 m / 0.01 ~ 1 h
03 0.01 ~ 3 s / 0.01 ~ 3 m / 0.01 ~ 3 h
Time 06 0.01 ~ 6 s / 0.01 ~ 6 m / 0.01 ~ 6 h
range 10 0.01 ~ 10 s / 0.01 ~ 10 m / 0.01 ~ 10 h
30 0.01 ~ 30 s / 0.01 ~ 30 m / 0.01 ~ 30 h
60 0.01 ~ 60 s / 0.01 ~ 60 m / 0.01 ~ 60 h
Repeating error Max. ±0.3 % (ratio of maximum scale)
Time error
Setting error Max. ±5 % (ratio of maximum scale)
Output mode FLICKER (ON Start) FLICKER (ON-A Start)
Control output Contact configuration D type (time limit 1c) F type (time limit 2c)
Contact capacity 250 V a.c. 3 A (Resisitive load)
Relay life ● Mechanical life: min. 10 million times, ● Electrical life : min. 100,000 times
Dielectric strength 2,000 V a.c. 60 ㎐ for 1 min
Noise immunity ±2 kV (among operation power terminals), square wave noise by noise simulator (pulse width:1 ㎲)
Insulation resistance Min. 100 ㏁ (500 V d.c. Mega standard)
Vibration resistance 10 - 55 ㎐ (for 1 min) single amplitude 0.5 ㎜ X・Y・Z each direction 2 hours
Shock resistance 300 ㎨ (30 G) X・Y・Z each direction 3 times
Storage temperature -25 ~ 65 ℃
Ambient temperature & humidity -10 ~ 55 ℃, 30 ~ 85 % RH (Without condensation)
Weight (g) 150

Suffix code
Model Code Content
□- □ □ □ □ Analog Timer
Appearance TF62N Twin timer 58(W) X 84(H) ㎜
TF62D Dual timer 58(W) X 84(H) ㎜
P Panel type
Installation structure
E Exposed type
01 1 sec, 1 min, 1 hour
03 3 sec, 3 min, 3 hour
Range 06 6 sec, 6 min, 6 hour
(Dip switch selection) 10 10 sec, 10 min, 10 hour
30 30 sec, 30 min, 30 hour
60 60 sec, 60 min, 60 hour
D TF62N Twin timer fixed code
Control output
F TF62D Dual timer fixed code
24-240 Va.c. 50/60 Hz or 24-240 V d.c. (Common)
Power voltage
12 12 V d.c. (only for T48N, order-made)
※ Installation type selection is only applied to the model T57N, TF62N and TF62D (Model T38N requires separate purchase of panel adapter)

64
 Analog Timers

MA4N series
Specifications New product
Count/Timer
Model MA4N-A MA4N-B MA4N-C
Small LCD
counter

Digital
Counter/
Appearance Timer

New product
Timer

Small LCD
W X H X D (㎜) 48.0×48.0×61.3 Timer

Power voltage 24-240 V a.c. 50/60Hz or 24-240 V d.c.

Digital
Voltage fluctuation rate ±10 % of power voltage Twin Timer

Power consumption 5.3 VA (240 V a.c.), 2.5 W (240 V d.c.)

Digital
Return time Max. 0.1 sec Timer

Min signal width START input, INHIBIT input, RESET input: min. 20 ㎳ -
Weekly/
yearly
● Non-voltage input, Time switch
● Impedance during short circuit : max. 2 ㏀,
Input -
● Residual voltage during short circuit: max. 0.7 V d.c. , • Timing
Relay
● Impedance during open: min. 100 ㏀

Time limit 2c Time limit 1c, instantaneous 1c Time limit 2c, time limit 1c + instantaneous 1c Analog
Output ON-Delay
● NO : 10 A 125 V a.c., 5 A 250 V a.c., 5 A 30 V d.c. ● NC : 3 A 125 V a.c., 2 A 250 V a.c., 1 A 30 V d.c. Timer

Repeating error Max. ±0.3 % Analog

Twin/Dual
Setting error Max. ±5 %. ±0.05 sec Timer

Temperature error Max. ±2 % Analog

Multi
Insulation resistance Min. 100 ㏁ (500 V d.c. mega standard) Timer

Dielectric strength 2,000 V a.c. 50/60 ㎐ for 1 min Star-delta

Timer
Impulse voltage Max. ±2000 V

Vibration resistance 10 - 55 ㎐ Double amplitude 0.75 ㎜

Shock resistance 300 ㎨ (approx. 30 G)

Mechanical Min. 10 million times (switching frequency 180 times / min)

Life
Electrical More than 100 thousand times (250 V a.c. 3 A resisitive load)

Terminal structure Plug 11-pin Plug 8-pin

Ambient temperature & humidity -10 ~ 55 ℃, 35 ~ 85 % RH (단, 결로현상이 없을 것)

Storage temperature -20 ~ 65 ℃

Weight (g) Approx. 100 g (fixtures included)

Suffix code
Model Code Content
MA4N- □ Analog Multi Timer

A Time limit 2c ※ 11-pin type

Type B Time limit 1c + instantaneous 1c ※11-pin type

C Time limit 2c, time limit 1c + instantaneous 1c ※ by mode selection (8-pin type)

Power voltage 24-240 V a.c. 50/60 Hz or 24-240 V d.c.

65
 ANALOG TIMERS

MA4SD
Specifications
Model MA4SD MA4SDI

Appearance

W X H X D (㎜) 48.0×48.0×61.3

Power voltage 100-240 V a.c. 50/60Hz, 24-240 V d.c.

Allowable voltage fluctuation rate ±10 % of power voltage

Power consumption Approx. 3.8 VA (100-240 V a.c. 60 Hz), Approx. 1.9 W (24–240 V d.c.)

Return time Max. 100 ㎳

Operating time range 1 ~ 300 Sec

Υ ● Repetition error : max. ±0.3 % ● Setting error : max. ±5 %

Operating time error
● Voltage error : max. ±0.5 % ● Temperature tolerance : max. ±2 % (ratio of maximum scale)

△ Conversion time error Max. ±25 %

Operation mode Power ON Start

Control Υ Υ
Contact configuration Contacts : 1a, △ Contacts : 1a Contacts : 1a, △ contacts: 1a, instantaneous contacts: 1a
output
Contact capacity 250 V a.c. 5 A resisitive load

Relay life ● Mechanical: min. 5 million times ● Electrical: min. 100,000 times (250 V a.c. 5 A resisitive load)

Insulation resistance Min. 100 ㏁ (500 V d.c. Mega standard, conductive terminal - exposed unfilled metal part)

Dielectric strength 2000 V a.c 50/60 ㎐ for 2 min (conductive terminal - exposed unfilled metal part)

Noise immunity ±2 kV (among operation power terminals, pulse width ±1 ㎲, square wave noise by noise simulator)

Vibration resistance 10 - 55 ㎐ (for 1 min), double amplitude 0.75 ㎜ X・Y・Z each direction 1 hour

Shock resistance 300 ㎨ (30G) X・Y・Z each direction 3 times

Ambient temperature & humidity -10 ~ 55 ℃, 35 ~ 85 % RH (Without condensation)

Storage temperature -25 ~ 65 ℃

Weight (g) Approx. 95 g (fixtures included)

Suffix code
Model Code Content
MA4 □ Analog Multi Timer (Star-Delta Timer), 48 (W) × 48 (H) ㎜
Υ
SD (Star) output, △ (Delta) output
Control output Υ
SDI Instantaneous output, (Star) output, △(Delta) output

66
 Panel Meters

LP3
Specifications
NEW
New product
Multi-pulse
meter
Model LP3-5A5 LP3-5A3 LP3-5AN
Small LCD
Pulse meter

Multi
Appearance Pulse meter

New product
Multi Panel
meter

Digital
WXHXD(㎜) 96.0×48.0×71.1 Multi Panel
meter
Power voltage 100-240 V a.c. 50/60 ㎐
Power consumption Max. 15 VA Max. 13 VA Max. 10 VA Digital
Wattmeter
Display method Negative LCD display
Character size PV value (14.5 ㎜), SV value (10 ㎜) Digital
Voltage/
Input frequency Contactless (max. 50 K㎐, ON/OFF pulse width 10 us min), contact (max. 30 ㎐, ON/OFF pulse width min. 16.6 ㎳) Ammeter

Input Voltage [H] level (4.5 - 24 V d.c.), [L] level (0 - 1 V d.c.), input impedance (4.5 ㏀) Digital
type Frequency
Non-voltage Impedance during short circuit (max. 300 Ω), residual voltage (1 V max), impedance during open (min. 100 ㏀) meter

Measuring range F1, F2, F10, F11, F12, F13 : 0.0005 ~ 50 KHz, F3, F4, F5, F6 : 0.001 s ~ 3200 s, F7, F8, F9 : 0 ~ 4x109
Digital
Measuring accuracy F1, F4, F10, F11, F12, F13 : FS ±0.05 % rdg ±1 digit, F2, F3, F5, F6 : FS ±0.01 % rdg ±1 digit Scale meter

External power supply 12 V d .c. ±10 % 100 ㎃

Digital
Display cycle 0.05 sec / 0.5 sec / 1 sec / 2 sec / 4 sec / 8 sec Small type
DC indicator
Display range -99999 ~ 99999
Power outage compensation Approx. 10 years (applying non-volatile EEPROM)

HH (SPST), H (SPST), GO (SPST),

L (SPST), LL (SPST)
H (SPDT), GO (SPST), L (SPDT) -
Control output * HH/H output COM common,
* LL/L output COM common

NO contact (250 V a.c. 5 A resisitive load), NC contact (250 V a.c. 2 A resisitive load)

Relay Electrical Min. 100 thousand times

Life Mechanical Min. 10 million times (250 V a.c. 2A)
Vibration resistance 10 - 55 ㎐ double amplitude 0.75 ㎜ X・Y・Z each direction 2 hours
Insulation Resistance Min. 100 ㏁ (500 V d.c.), conductive terminal - unfilled metal
Dielectric strength 2000 V a.c. at 60㎐ for 1 min (different live part terminals)
Noise immunity ±2000 V (pulse width 1 ㎲, apply square wave noise by noise simulator among power terminals)
Degree of protection IP66 (IEC 60529) (product front)
Ambient temperature & humidity -10 ~ 50 ℃, 35 ~ 85 % RH (Without condensation)
Storage temperature -20 ~ 60 ℃

Certified

Weight (g) ※ 210 208 154

※ The weight includes the terminal cover and the cover weight is 8g.

Suffix code
Model Code Content
LP □ □ □ □ LCD Multi Pulse Meter

Appearance 3 96(W) × 48(H) ㎜

Display digits 5 5-Digit display

Power voltage A 100-240 V a.c. 50/60 ㎐

N Indication only

Output specifications 3 3-stage setting (H/GO/L)

5 5-stage setting (HH/H/GO/L/LL)

67
 PANEL METERS

LP1
Specifications
Model LP1

Appearance

WXHXD(㎜) 48.0×24.0×54.0
Power voltage Non-power (battery built-in, changeable)
Display method LCD display method, zero blanking
Battery life More than approx. 3 years (approx. 25 ℃)
Character size 8.7 ㎜
Voltage input (INB) ● AC voltage input: 3 - 30 V a.c. ● DC voltage input: When High 4.5 - 30 V d.c. When Low 0 - 2 V d.c.
Input
Voltage input (INC) 30-240 V a.c.
type
Non-voltage input (INA) ● Residual voltage during short circuit: max. 0.5 V, ● Max. impedance during short circuit: max. 10 ㏀, ● Min impedance during open: min. 500 ㏀
HOLD input method Non-voltage input
Measuring range ● rpm (1 ~ 10000 rpm), ● 0.1 rpm ( 0.1 ~ 1000.0 rpm), ● rps (1 ~ 1000 rps), ● Hz (1 ~ 1000 Hz), ● 0.1 Hz (0.1 ~ 100.0 Hz)
External setting switch SW1-1 : rps / rpm, SW1-2 : ×1 / ×0.1, SW2-1 : RESET, SW2-2 : (rps, rpm) / Hz
External connection Terminal block (5 pins)
Measuring accuracy ±0.1% rdg ±1 digit
Vibration resistance 10 - 55 Hz (1 minute cycle) double amplitude 0.75 ㎜ X・Y・ Z each direction 1 hour
Shock resistance 300 ㎨ X・Y・Z each direction 3 times
Insulation Resistance Min. 100 ㏁ (500 V d.c. Mega standard, conductive terminal - exposed unfilled metal part)
Dielectric strength 2000 V a.c 50/60 ㎐ for 1 min (conductive terminal - exposed unfilled metal part)
Ambient temperature & humidity -10 ~ 55 ℃, 35 ~ 85 % RH (Without condensation)
Storage temperature -20 ~ 65 ℃
Weight (g) 46

(note 1) The battery life is calculated based on the above conditions, so please consider them while replacing it

HLP1
Specifications
Model HLP1

Appearance

W X H X D (㎜) 48.0×24.0×37.1
Input specifications 4-20 ㎃ d.c.
Max. display digits 4 Digits (-1999 ~ 9999)
Input
Sampling cycle Selection by parameter (0.5, 1, 2, 3, 4, 5 sec)
Input correction ±3 % of FS
Accuracy ±0.3 % of FS ±1 Digit
Performance Insulation resistance 100 ㏁ (500 V d.c.)
Dielectric strength 2,300Va.c. 50/60 ㎐ for 1 min
● High limit scale setting ● Low limit scale setting ● Decimal point setting ● Display cycle setting
Functions ● Error display range setting ● High limit correction of display value ● Low limit correction of display value
●Measurement delay time setting ●Flashing function setting ●Parameter lock setting
Power voltage Non-voltage type
Ambient temperature & humidity -5 ~ 50 ℃, 20 ~ 90 % RH (Without condensation)
Storage temperature -25 ~ 70 ℃
Vibration resistance 10 ~ 55 ㎐ single amplitude X・Y・Z each direction 2 hours
Shock resistance 300 ㎨, X・Y・Z each direction 3 times

68
 Panel Meters

LM series NEW
New product
Specifications Multi-pulse
meter
Model LM3/6－DV LM3/6－DA LM3/6－AV LM3/6－AA
Small LCD
Pulse meter

Multi
Pulse meter

New product
Multi Panel
meter

Size ӗLM3 : 96(W) X 48(H) X 68(D) mm ӗLM6 : 72(W) X 36(H) X 81(D) mm Digital
Multi Panel
Power 100 － 240 V a.c. 50/60 Hz meter

ӗLM3-N: 6 VA or less ӗLM3-3R/3RC: 10 VA or less ӗLM3-3RT: 11 VA or less ӗLM3-3NC/3PC: 9 VA or less ӗLM3-3NT/3PT: 10 VA or less
Power Consumption
ӗLM6-N: 5 VA or less ӗLM6-3R: 7 VA or less ӗLM3-3N/3P: 5 VA or less ӗLM3-RC: 6 VA or less ӗLM3-RT: 7 VA or less Digital
Wattmeter
Input signal DC voltage DC current AC voltage / frequency AC current / frequency
500 V / 100 V 5A / 2A 500 V / 250 V Digital
5A / 2A Voltage/
50 V / 10 V 500 mA / 200 mA 110 V / 50 V
Input range 500 mA / 200 mA Ammeter
5V / 1V 50 mA / 4 － 20 mA 20 V / 10 V
50 mA / 20 mA
200 mV / 50 mV 5 mA / 2 mA 2V / 1V Digital
Frequency
AC measurement method AVG / RMS selective measurement meter
Input sampling cycle 50 ms
Input sampling method OVER sampling method using continuous approximation A / D converter Digital
Scale meter
Maximum allowable input F.S. of each input range 110 %
Frequency measurement range 0.2 ~ 9999 Hz (Frequency measurement range depends on the decimal point position) Digital
Display ӗ Negative－LCD ӗ 4 digit 2 rows ӗPV (White) ӗ SV (Green) Small type
DC indicator
Character size ӗLM3 : 17.6 X 10.6 mm ӗLM6 : 7.0 X 11.5 mm
Maximum display －9999 ~ 9999
ӗ [ 23 ℃ ± 5 ℃ ] － F.S. ± 0.1 % rdg ± 2 digit ӗ [ 23 ℃ ± 5 ℃ ] － F.S. ± 0.3 % rdg ±3 digit
Display degree ӗ [ 23 ℃ ± 5 ℃, 5 A ] － F.S. ± 0.3 % rdg ± 3 digit ӗ [ 23 ℃ ± 5 ℃, frequency ] － F.S. ± 0.1 % rdg ± 2 digit
ӗ [ 50 ℃ ~ － 10 ℃ ] － F.S. ± 0.5 % rdg ±3 digit ӗ [ 50 ℃ ~ － 10 ℃ ] － F.S. ± 0.5 % rdg ± 3 digit
Control output ӗ Contact output : 3 stage, SPST (1a), 250 V a.c. 5 A 3 stage,ӗSolid state output: 3-stage, NPN or PNP open collector, 12 - 24 V d.c. 50mA or less
Relay life time ӗElectrical (about 100,000 times, 250 V a.c. 5 A) •ӗMechanical (about 5 million times)
Optional output ӗTransmission output (4－20 mA) •ӗRS－485 output
ӗHOLD/ZERO Optional input •ӗNon－voltage input •ӗShort circuit impedance: 300 Ω or less
External input
ӗResidual voltage: 1 V or less •ӗImpedance when open: 100 kΩ or more
ӗCommunication protocol : Modbus－RTU ӗCommunication method : RS－485 (2－wire half duplex)
Communication
ӗCommunication speed : 2400 / 4800 / 9600 / 19200 / 38400 bps
Insulation Resistance 100 ㏁ or more (500 V d.c. Mega standard, between conductive terminal and case)
Withstand voltage 2000 V a.c. 60 Hz 1 minute (between conductive terminal and case)
Noise ± 2 kV(Between operation power terminals, Pulse width = 1 us, Square wave noise by noise simulator)
Vibration resistance 10 － 55 ㎐, Single amplitude 0.5 ㎜, 3－axis angular, 2 hours
Protection structure • IP66 (front) • Terminal block protection cover applied
Ambient temperature and humidity － 10 ~ 50 ℃, 35 ~ 85 ％ RH
Storage temperature － 20 ~ 65 ℃

Suffix code
Model Code Description
LM □- □ □- □ □- □ LCD Multi Panelmeter
3 96(W) X 48(H) mm
Appearance
6 72(W) X 36(H) mm
Displayable Digit 4 4 Digit indication
DV DC voltage
DA DC current
Input Specification
AV AC voltage
AA Alternating current
N Non only (Indication option output)
R 1-stage contact output *LM6 only (For LM6-RC/RT, 1-stage contact output fixed.)
Output specifications 3R 3－stage contact output
3N 3－stage NPN open collector output
3P 3－stage PNP open collector output
－ Non option output
Optional output C RS－485 output (MODBUS－RTU)
T Transmission output (4 － 20 mA d.c.)
Power supply voltage A 100 – 240 V a.c. 50/60 Hz

69
 PANEL METERS

WM3
Specifications
Model WM3

Appearance

WXHXD(㎜) 96.0×48.0×102.0
Method of measurement Periodic measurement method
Input Voltage 0 - 220 V a.c.
Display Cycle 0.1 ~ 2 sec
Power factor 80 ~ 100 %
Response speed 2 seconds (maximum range)
Number of displayed lines 4 Digit (-1999 ~ 9999)
Display 7 Segment LED
Accuracy ±0.5 % of FS, ±10 Digit
Insulation Resistance 100 ㏁ or more (500 V d.c.)
Voltage Resistance 2,000 V a.c. 1 minute (power terminal – input terminal)
● Measurement item, ● Show Average Value, ● Scale Functions, ● Set Decimal Point, ● Hold, ● Show Maximum/Minimum,
● Communication Functions, ● Effective Value (RMS) measurement function, ● Decimal Point Location, ● Hold function,
Function
● Lock function, ● Address, ● Communication speed, ● Show Maximum Value, ● Show Min Value, ● Upper limit setting,
● Lower limit setting, ● Select Output Behavior (PSOT), ● Hysteresis Settings,

You can set the address from 00 to 99 times and select the modulation rate for serial transmissions
Communication Output (RS485)
(transmission rate: 1200, 2400, 4800, 9600, 19200 bps)
Current Output (Transfer) 4-20 ㎃ d.c. output for the current indicator (resolution: 12,000)
Transistor Output PNP/NPN Open Collector Output (12-24V d.c. 50㎃ or less)
Relay Output 1 a X 3 Contact (HI, GO, LO), (220 V a.c. 5 A)
Power Voltage 100-240 V a.c. 50/60 ㎐ (Common)
Voltage Fluctuation Rate -15 to 10% of the power voltage
Power Consumed Approx. 5 VA
Ambient temperature & humidity 0 ~ 50 ℃ , 35 ~ 85 % RH (No condensation)
Storage temperature -10 ~ 70 ℃
Vibration resistance 10-55 ㎐ single amplitude for 2 hours in each of X, Y, and Z directions
Shock resistance 300 ㎨ X・Y・Z 6 each direction 3 times
Weight (g) 300

Suffix code
Model Code Content
WM3- □ □ □ Digital power meter
Constants and Wires 1 Single-phase 2-ray (0-220 V a.c.)
Input Specifications 01 Input Specification Reference (see code)
N Display Only
0 Relay (HI, GO, LO), 4-20㎃ d.c.
1 Relay (HI, GO, LO)
Output (optional) 2 NPN open Collector (HI, GO, LO), 4-20 ㎃ d.c.
3 PNP open Collector (HI, GO, LO), 4-20 ㎃ d.c.
4 NPN open Collector (HI, GO, LO), RS485
5 PNP open Collector (HI, GO, LO), RS485

Input Specifications
Code Content
01 XXX : 5 A Set Transmission Ratio (CT sold separately)
Universal Translator
02 XXX : 1 A Set Transmission Ratio (CT sold separately)
03 0 - 2.5 A 0 - 500.0 W max. (With CT)
04 0-5A Dedicated Translator 0 - 1100.0 W max. (With CT)
05 0 - 10 A (H-1W) 0 - 2200.0 W max. (With CT)
06 0 - 15 A 0 - 3300.0 W max. (With CT)
07 0 - 30 A Dedicated Translator 0 - 6600.0 W max. (With CT)
08 0 - 50 A (H-2W) 0 - 11.00 KW max. (With CT)
09 0 - 80 A Dedicated Translator 0 - 17.60 KW max. (With CT)
10 0 - 100 A (H-4W) 0 - 22.00 KW max. (With CT)
11 0 - 150 A Dedicated Translator 0 - 33.00 KW max. (With CT)
12 0 - 200 A (H-5W) 0 - 44.00 KW max. (With CT)

70
 Panel Meters

BS series
Specifications New product
Multi-pulse
Model BS3 BS6 BS1 meter

Appearance Small LCD

Pulse meter

WXHXD(㎜) 96.0×48×102.0 72.0×36.0×100.0 48.0×24.0×100.0

Input signal Input voltage, current, instrument signal input (4 - 20 ㎃ d.c. or 1 - 5 V d.c.) Multi
Pulse meter
A/D converter Double integration method
Sampling cycle 300 ㎳ 400 ㎳
New product
Response speed Approx. 2 sec (max. range) Approx. 3 sec (max. range) Multi Panel
Input meter
External control Present value hold function by contact input
Max. display digits ± 1999 Digital
Multi Panel
Display 7 segment LED meter
Measurement and
Effective value indicating method by full-wave rectification
indication method
Digital
Accuracy AC : ±0.5 % of FS ±1 Digit, DC : ±0.2 % of FS ±1 Digit Wattmeter

Performance Insulation resistance Min. 100 ㏁ (500 V d.c.)

2000 V a.c. for 1 min Digital
Dielectric strength 1500 V a.c. for 1 min (between external terminal and case) Voltage/
(between external terminal and case)
Ammeter
Power voltage 110 V / 220 V a.c. 50/60 ㎐ common 100-240 V a.c. 50/60 ㎐ common
Voltage fluctuation rate ±10 % of power voltage -15 ~ 10 % of power voltage Digital
Frequency
Power consumption Max. 2 VA Max. 4 VA meter

Ambient temperature & humidity 0 ~ 50 ℃, 35 ~ 85 % RH (without condensation) -10 ~ 55 ℃, 35 ~ 85 % RH (without condensation)

Storage temperature -10 ~ 70 ℃ -20 ~ 65 ℃ Digital
Scale meter
Vibration resistance 10 - 55 ㎐ single amplitude X・Y・Z each direction 2 hours
Shock resistance 300 ㎨, X・Y・Z 6 directions each 3 times Digital
Weight (g) 350 250 150 Small type
DC indicator

Suffix code ※ Model name : BS6 and BS3 have different range codes Measuring range ● AC current (BS3, BS6, BS1)
Model Measuring range Resolution Input impedance Max. allowable input current
Model Code Content
BS□-NA201 19.99 ㎃ 10 ㎂ 10 Ω 50 ㎃
BS □- □ □ □ □ Digital Voltmeter / Ammeter BS□-NA202 199.9 ㎃ 100 ㎂ 1Ω 300 ㎃
6 72 X 36 ㎜ BS□-NA203 1.999 A 1㎃ 0.1 Ω 3A
Appearance 3 96 X 48 ㎜ BS□-NA204 5.00 A 10 ㎃ 40 ㏁ 5.1 A
BS□-NA205 19.99 A 10 ㎃
1 48 X 24 ㎜ BS□-NA206 30.0 A 100 ㎃
Output N Display only BS□-NA207 100.0 A 100 ㎃
Current transformer use
10 AC voltmeter (AC) BS□-NA208 150.0 A 100 ㎃
(secondary current 5A)
A BS□-NA209 199.9 A 100 ㎃
20 AC ammeter (AC)
BS□-NA2010 300 A 1A
10 DC voltmeter (DC) BS□-NA2011 1999 A 1A
Input
20 DC ammeter (DC)
D ● AC voltage (BS3)
11 DC voltmeter
Model Measuring range Resolution Input impedance Max. allowable input current
21 DC ammeter
BS3-NA101 1.999 V 1㎷ 100 ㏀ 10 V
Measuring range 1 Measuring range model example: BS3-NA101 (1.999 V) BS3-NA102 19.99 V 10 ㎷ 1㏁ 50 V
● DC current (BS1) BS3-NA103 199.9 V 100 ㎷ 10 ㏁ 300 V
BS3-NA104 400 V 1V 10 ㏁ 500 V
Model Measuring range Resolution Input impedance Max. allowable input current
BS6-NA105 400 V 1V 10 ㏁ 500 V
BS1-ND201 199.9 ㎂ 0.1 ㎂ 1㏀ 50 ㎃
BS1-ND202 1.999 ㎃ 1㎂ 100 Ω 150 ㎃ ● AC voltage (BS6, BS1) ※ Model name: BS1-NA105 (range: 500V)
BS1-ND203 19.99 ㎃ 10 ㎂ 10 Ω 300 ㎃
Model Measuring range Resolution Input impedance Max. allowable input current
BS1-ND204 199.9 ㎃ 100 ㎂ 1Ω 3A
BS1-ND205 1.999 A 1㎃ 0.1 Ω 3A BS □-NA101 199.9 ㎷ 0.1 ㎷ 10 ㏀ 10 V
BS1-ND206 5.00 A 10 ㎃ 0.01 Ω 5A BS □-NA102 1.999 V 1㎷ 100 ㏀ 10 V
BS1-ND207 19.99 A 10 ㎃ BS □-NA103 19.99 V 10 ㎷ 1㏁ 50 V
Shunt use BS □-NA104 199.9 V 100 ㎷ 10 ㏁ 300 V
BS1-ND208 199.9 A 100 ㎃
(secondary voltage 50㎷) BS6-NA105 400 V
BS1-ND209 1999 A 1A 1V 10 ㏁ 500 V
BS1-NA105 500 V
● DC current (BS3)
● DC ammeter (BS3, BS6, BS1)
Model Measuring range Resolution Input impedance Max. allowable input current
BS3-ND201 1.999 ㎃ 1㎂ 100 Ω 50 ㎃ Model Input Display range Input impedance Max. allowable input current
BS3-ND202 19.99 ㎃ 10 ㎂ 10 Ω 150 ㎃ BS □-ND211 50.0 25 Ω 150 ㎃
BS3-ND203 199.9 ㎃ 100 ㎂ 1Ω 300 ㎃ BS □-ND212 4-20 ㎃ DC 100.0 50 Ω 150 ㎃
BS3-ND204 1.999 A 1㎃ 0.1Ω 3A BS □-ND213 199.9 100 Ω 150 ㎃
BS3-ND205 5.00 A 10 ㎃ 0.01Ω 5A
BS3-ND206 19.99 A 10 ㎃
● DC voltmeter (BS3, BS6, BS1)
Shunt use Model Input Display range Input impedance Max. allowable input current
BS3-ND207 199.9 A 100 ㎃
(secondary voltage 50㎷)
BS3-ND208 1999 A 1A BS □-ND111 50.0 500 ㏀ 100 V
BS □-ND112 1-5Vd.c. 100.0 500 ㏀ 100 V
● DC current (BS6) BS □-ND113 199.9 500 ㏀ 100 V
Model Measuring range Resolution Input impedance Max. allowable input current InputMeasuring range 0 - 10 V d.c. (optional)
BS6-ND201 199.9 ㎂ 0.1 ㎂ 100 Ω 1㎃
BS6-ND202 1.999 ㎃ 1㎂ 10 Ω 50 ㎃ ● DC voltage (BS3, BS6, BS1)
BS6-ND203 19.99 ㎃ 10 ㎂ 1Ω 150 ㎃ Model Measuring range Resolution Input impedance Max. allowable input voltage
BS6-ND204 199.9 ㎃ 100 ㎂ 0.1 Ω 300 ㎃ BS□-ND101 199.9 ㎷ 0.1 ㎷ 10 ㏀ 70 V
BS6-ND205 5.00 A 10 ㎃ 400 ㏁ 5.1 A BS□-ND102 1.999 V 1㎷ 100 ㏀ 100 V
BS6-ND206 19.99 A 10 ㎃ BS□-ND103 19.99 V 10 ㎷ 1㏁ 200 V
Shunt use
BS6-ND207 199.9 A 100 ㎃ BS□-ND104 199.9 V 100 ㎷ 10 ㏁ 300 V
(secondary voltage 50㎷)
BS6-ND208 1999 A 1A BS□-ND105 500 V 1V 10 ㏁ 600 V

71
 PANEL METERS

HP3
Specifications
Model HP3

Appearance

WXHXD(㎜) 96.0×48.0×100.0
Input contact 1 Channel
Input signal 4 - 20 ㎃ / 1-5 V d.c. (2-wire current output and 3-wire voltage output type transducer only)
Max. display digits 5 Digits (±19999)
Input
Sampling cycle 500 ㎳
Input correction -100 ~ 100 % of FS
Input filter setting 0 ~ 100 sec
Degree of Display ±0.03 % of FS
Retransmission output 4-20 ㎃ d.c. (Load resistance: max. 600 Ω)
Performance
Insulation resistance 100 ㏁ (500 V d.c.)
Dielectric strength 2,300 V a.c. 50/60 ㎐ for 1 min
Alarm setting 2 Contacts (AL1, AL2)
Alarm Hysteresis setting AL1, AL2 each setting (0 ~ 10 % of FS)
Communication function Select between RS232 or RS485
Retransmission type Select retransmission output by parameter (DIR, REV, SQRT)
Scale setting -19999 ~ 19999
Functions
Decimal places setting 0~4
Filter setting 0 ~ 100 sec
Present value correction -100 ~ 100 % of FS
Sensor disconnection selection Selection by parameter UP(0)/DOWN (1)/OFF(2)
LOCK Functions Data setting lock function selection OFF (0) / ON (1)
Output points: 1c X 2 contacts (AL1, AL2)
Contact capacity: 5 A 240 V a.c. (5 A 30 V d.c.)
Alarm output
Resolution : 125 ㎳
Hysteresis : 0~10 % of FS
Output
Retransmission type : Selection by parameter (DIR, REV, SQRT)
Output points : 1 contact
Retransmission output
Output signal : 4 - 20 ㎃ d.c. (Load resistance max. 600 Ω)
Resolution : 2,600
Power voltage 100-240 V a.c. 50/60 ㎐
Voltage fluctuation rate ±10 % of power voltage
Power consumption Approx. 5 VA

Normal Ambient temperature & humidity -5 ~ 50 ℃, 20 ~ 90 % RH (Without condensation)

specifications Storage temperature -25 ~ 70 ℃
Vibration resistance 10 - 55 ㎐ single amplitude X・Y・Z each direction 2 hours
Shock resistance 300 ㎨, X・Y・Z directions each 3 times
Weight (g) 300

Suffix code
Model Code Content

HP3- □ Digital Scale Meter

0 No communication

Option 1 RS232

2 RS485

72
 Panel Meters

BA1 New product

Specifications Multi-pulse
meter
Model BA1-D□□ BA1-D□□A
Small LCD
Pulse meter

Multi
Appearance Pulse meter

New product
Multi Panel
meter

WXHXD(㎜) 48.0×24.0×60.0 Digital

Multi Panel
Input signal Input voltage, current, instrument signal input (4 - 20 ㎃ d.c. or 1 - 5 V d.c.) meter

A / D converter Double integration method

Digital
Input Sampling cycle 300 ㎳ Wattmeter
Response speed Approx. 2 sec (max. range)
Max. display digits ±1999 Digital
Voltage/
Accuracy DC : ±0.2 % FS ±1 Digit Ammeter

Performance Insulation resistance Min. 100 ㏁ (500 V d.c.)

Digital
Dielectric strength 1500 V a.c. for 1 min (between power terminals and input terminals) Frequency
meter
Decimal point display 10 ¹, 10², 10³ display by rear terminal connection
Polarity display If the input signal is reversed, "-" is displayed automatically Digital
Scale meter
Functions Range over display Displayed as "1 □□□"
Range below display Displayed as ”-1□□□”
Digital
Display 7 segment LED Small type
DC indicator
Power voltage 5 V d.c. 12-24 V d.c.
Voltage fluctuation rate ±10 % of power voltage
Power consumption Approx. 3 W Approx. 5 W
Ambient temperature & humidity 0 ~ 50 ℃, 35 ~ 85 % RH (without condensation)
Storage temperature -10 ~ 70 ℃
Vibration resistance 10 ~ 55 ㎐ 편진폭 X・Y・Z each direction 2 hours
Shock resistance 300 ㎨, X・Y・Z each direction 3 times

Suffix code
Model Code Content
BA1- □ □ □ □ Digital Voltmeter / Ammeter
10 DC voltage (DC)
20 DC current (DC)
Input D
11 DC voltmeter (1-5 V d.c.)
21 DC ammeter (4-20 ㎃ d.c.)
Range code Refer to measuring range
5 V d.c.
Power voltage
A 12-24 V d.c.

Measuring range
● DC voltage ● DC current
Input Max. allowable Model Measuring range Resolution Input Max. allowable
Model Measuring range Resolution impedance input voltage
impedance input voltage
BA1-D201 199.9 ㎂ 0.1 ㎂ 1㏀ 1㎃
BA1-D101 199.9 ㎷ 100 ㎶ 100 ㏀ 70 V
BA1-D202 1.999 ㎃ 1㎂ 100 Ω 50 ㎃
BA1-D102 1.999 V 1㎷ 1㏁ 100 V BA1-D203 19.99 ㎃ 10 ㎂ 10 Ω 150 ㎃
BA1-D204 199.9 ㎃ 100 ㎂ 1Ω 300 ㎃
BA1-D103 19.99 V 10 ㎷ 1㏁ 250 V
BA1-D205 1.999 A 1㎃
BA1-D104 199.9 V 100 ㎷ 10 ㏁ 300 V BA1-D206 19.99 A 10 ㎃ Shunt use
BA1-D207 199.9 A 100 ㎃ (Secondary voltage 50 ㎷)
BA1-D111 50.0 100 ㏀ 100 V
BA1-D208 1999 A 1A
BA1-D112 1-5Vd.c. 100.0 100 ㏀ 100 V BA1-D211 50.0 25 Ω 150 ㎃
BA1-D212 4-20㎃ d.c. 100.0 50 Ω 150 ㎃
BA1-D113 199.9 100 ㏀ 100 V BA1-D213 199.9 100 Ω 150 ㎃

※ Accuracy: ± 0.2% of present value ± 1 digit (23 ℃ ± 5 ℃) ※ Accuracy: ± 0.2% of present value ± 1 digit (23 ℃ ± 5 ℃)

73
 Data Storage Device / Communication Converter /
Temperature and Humidity Converter

EM310
Specifications
CV310/300
Specifications
Model EM310 Model CV310 CV300

Appearance
Appearance

W×H×D(㎜) 49.3×33.0×17.8 52.0 x 90.0 x 20.0

9 V, 300 mA d.c. Adapter
Power voltage 9-30 V d.c.
(1.3 Ø DC Jack)
Power voltage 24 V d.c. 500 ㎃
Max.
Communication communication 460800 bps 2400 ~ 115200 bps
Asynchronous serial communication (RS232C) speed
method
Communication Communication Max. 1.2 km , 256 node Max. 1.5 km , 256 node
38,400 bps distance connectable connectable
speed
Communication 1/2nd circuit insulation,
Max. 5 m Built-in 2kV protection
distance Surge Protection Device Built-in,
Safety device for RS232 and RS485 /
Automatically generate ±15 KV
Setting method Front switch operation method RS422
ESD Protection Line Drive signals
Storage medium USB memory stick Two-line/four-line, built-in
2-wire / 4-wire,
Function termination resistance can be set,
built-in terminal resistor use/
File system FAT16, 32 support setting such as oil, zero, full/half duplex,
not use, full / half-duplex
etc.
Internal memory 32 Mbyte (Non-volatile)
Setting switch 4 Pin Dip Switch 6 Pin Piano Type Dip-Switch
Applicable TH500, TH300, TD500, TS500
products (However, TD500 and TH300 only support RS232 products) Weight (g) 24 Body : 60, Adapter : 300

CV250
Specifications
HMCE-103
Specifications
Model CV250 Model HMCE-103

Appearance
Appearance

CPU PIC32MX695F512L
Power voltage 100 / 240 V a.c. 50/60 ㎐
Memory SRAM : 128 Kbit, Flash : 512 Kbit
Power consumption Approx. 3 VA Input voltage 5 V d.c. (±10 %)
Input signal RTD : Pt100 Ω (IEC751), DRY / WET each 1 year Max. Current Max. under 250 mA
Measuring range Temperature : 0 ~ 100 ℃, Humidity : 0 ~ 100 % RH ● Data communication / serial console male
DB9 serial port ,
Accuracy Temperature : ±0.5 %, Humidity : ±1 % RH RS232
● Communication speed : 2400 ~ 115200 bps,
communication
Individual temperature/humidity output ● Flow control : None,
(Current by suffix code / output selection), ● Signal : TX, RX, GND신호 : TX, RX, GND
Output signal
4 - 20 ㎃ d.c. (load resistance max. 600 Ω),
1 - 5 V d.c (load resistance 1 ㏀ min) ● 2-wire half-duplex method for data communication,
RS485
● Communication speed : 2400 ~ 115200 bps,
Output communication
±5 % (Offset correction by variable resistor) ● Flow control: DE/RE, ● Signal : TX+, TX-
compensation
Insulation ● 4-wire full-duplex method for data communication,
Min. 20 ㏁ (500 V d.c.) RS-422
resistance ● Communication speed : 2400 ~ 115200 bps,
communication
Dielectric strength 2500 V a.c. (power terminal-signal input/output terminal) ● Flow control: None, ● Signal : TX+, RX+, TX-, RX-

Ambient ● 10/100 Base-T Ethernet (RJ-45 Connector),

temperature & 0 ~ 50 ℃, 35 ~ 85 % RH (without condensation) Ethernet ● Fluid IP support,
humidity communication ● It is possible to access many clients (up to 3),
Storage ● ARP, IP/ICMP, TCP, Telnet, DHCP
-25 ~ 65 ℃
temperature
Ambient setting Telnet or serial console interface
Weight (g) 300
LED ● Power input display, ● Activation status display
Ambient temperature -10 ~ 60 °C
Suffix code
Storage temperature -30 ~ 80 °C
Model Code Content
Certification standard KCC-REM-NUX-HMCE-103
CV250- □ Temperature / Humidity Converter
Warranty period 1 Year
C 4-20 ㎃ d.c.
Output signal Weight (g) 74
V 1-5 V d.c.

74
 Floatless level switches / Electrode holder

FS-3A
Specifications Electrode
Level switch
Model FS-3 A(High sensitivity) FS-3 A(Low sensitivity)
Electrode
Holder

Data storage
device,
Appearance Communication
converter,
Temperature
and humidity
converter

Power voltage 110 V a.c. 50/60 ㎐ / 220 V a.c. 50/60 ㎐

Allowable voltage fluctuation range ±10 % of power voltage
Inter-electrode voltage (secondary voltage) 24 V a.c. 8 V a.c.
Power consumption Approx. 3.2 VA
Response time 80 ㎳ max. for operation, 160 ㎳ max. for return
Inter-electrode operation resistance 0 - Approx. 27 KΩ 0 - Approx. 7 KΩ
Inter-electrode return resistance Approx. 38 KΩ - ∞ Ω Approx. 15 KΩ - ∞ Ω
Control output Relay contact outputs: (1c): 250 V a.c 5 A (resistive load)
Insulation resistance Min. 100 ㏁ (500 V d.c Mega), conductive and exposed unfilled metal part
Dielectric strength 2000 V a.c 50/60 ㎐ for 1 min (1st terminal - 2nd terminal)
Vibration resistance 10 - 55 ㎐ (1 minute cycle) single amplitude: 0.76 ㎜ X, Y, Zeach direction 2 hours
Shock resistance 300 ㎨
Life Mechanical : min. 5 million times (relay type), Electrical : 500,000 times min (resistive load)
Ambient temperature & humidity -10 ~ 50 ℃, 35 ~ 85 % RH (without condensation)

HY-ER3
Specifications
Appearance Dimension

`XU`
UY
RW WUW
ྊ

Þ]]U[ 㿕⺸⫠䝴O G☐⢰㢨ⶸP T

]W
Þ
¶
]W

ZTt[
X^UWXWUW Y^U]
_WUW

]]U]

ZTÞ[U_SGḴ䋩
ZTÞ_U\SGkw]U\ ZTtZU\
]W

{oylhkGwmYG Þ^
¶

Ḵ㟝⇌㇠Gἐᷝ _
ZTt]wXUWG{hw ZW¶
jhislGy|iily
㡕ᴵ␜㣄

Usage example
・ Example of Water Supply connection (with FS-3A) ・ Example of Drain connection (with FS-3A)

FS-3A FS-3A

R S T POWER
R S T POWER
COM 220 V a.c.
COM 220 V a.c.
50/60 Hz
50/60 Hz
NO NO
Contactor
Contactor

NC
NC ELECTRODE HOLDER
ELECTRODE HOLDER
(HY-ER3)
(HY-ER3)

E1
OFF (Motor stop)
E1
E2 ON (Motor start)
ON (Motor start)
E3 E2 OFF (Motor stop)
E3
Water tank
Pump Pump
Water tank
Motor Motor

Water Supplier Reservoir

75
 PROXIMITY SENSORS

UP series
Specifications
● Inductive DC 3 wire type
NPN UP8RM-1.5N□□ UP8RD-2N□□ UP12RM-2N□□ UP12RD-4N□□
Model
PNP UP8RM-1.5P□□ UP8RD-2P□□ UP12RM-2P□□ UP12RD-4P□□

Appearance

Shield Shield Non shield Shield Non shield

Standard sensing object (㎜) Iron 8 X 8 X 1 Iron 12 X 12 X 1
Sensing distance 1.5 ㎜ 2㎜ 2㎜ 4㎜
Setting distance 0 ~ 1.2 ㎜ 0 ~ 1.6 ㎜ 0 ~ 1.6 ㎜ 0 ~ 3.2 ㎜
Hysteresis Less than 10% of sensing distance
Response frequency 800 Hz 800 Hz 400 Hz
Power voltage 12-24 V d.c. (Usable voltage range 5 - 35 V d.c.)
Control output 200 ㎃ max (Resistive load)
Residual voltage Max. 1.5 V
Current consumption Max. 6 ㎃
Operation indication Red LED
Protection circuit Power reversely connected protective circuit, surge protective circuit and over current protective circuit are built-in.
Ambient temperature & humidity -25 ~ 70 ℃ (Less than ±10 % of sensing distance at temperature 20 ℃), 35 ~ 85 % RH
Insulation resistance Min. 50 ㏁ (500 V d.c. mega standard)
Dielectric strength 2000 V a.c. 50/60 ㎐ for 1 min (between the recharging part and case)
Vibration resistance 10 - 55 ㎐ (1 min cycle, double amplitude : 1.5 ㎜ 2 hours for each of X, Y and Z directions)
Shock resistance 500 ㎨ 3 times to each of X, Y and Z directions
Degree of protection IP67 (IEC 60529)
Connection structure ● Cable type (standard cable length 2 m), ● Pin Connector type, ● Connector type
Color NPN : green, PNP : navy
● Case : stainless, ● Sensing surface : PBT, ● Case : brass (chrome plating), ● Sensing surface: PBT,
Material
● Cable holder : polyester elastomer ● Cable holder : polyester elastomer
Cable 60 60 70 70
Weight (g) Pin Connector None None 30 30
Connector None None 30 30

● Inductive DC 3 wire type

NPN UP18RM-5N□□ UP18RD-8N□□ UP18RLM-5N□□ UP18RLD-8N□□
Model
PNP UP18RM-5P□□ UP18RD-8P□□ UP18RLM-5P□□ UP18RLD-8P□□

Appearance

Shield Shield Non shield Shield Non shield

Standard sensing object(㎜) Iron 18×18×1 Iron 25×25×1 Iron 18×18×1 Iron 25×25×1
Sensing distance 5㎜ 8㎜ 5㎜ 8㎜
Setting distance 0~4㎜ 0 ~ 6.4 ㎜ 0~4㎜ 0 ~ 6.4 ㎜
Hysteresis Less than 10% of sensing distance
Response frequency 350 Hz 200 Hz 350 Hz 200 Hz
Power voltage 12-24 V d.c. (Usable voltage range 5 - 35 V d.c.)
Control output 200 ㎃ max (Resistive load)
Residual voltage Max. 1.5 V
Current consumption Max. 6 ㎃
Operation indication Red LED
Protection circuit Power reversely connected protective circuit, surge protective circuit and over current protective circuit are built-in.
Ambient temperature & humidity -25 ~ 70 ℃ (Less than ±10 % of sensing distance at temperature 20 ℃), 35 ~ 85 % RH
Insulation resistance Min. 50 ㏁ (500 V d.c. mega standard)
Dielectric strength 2,000 V a.c. 50/60 Hz for 1 min (Between the recharging part and case)
Vibration resistance 10 - 55 ㎐ (1 min cycle, double amplitude : 1.5 ㎜ 2 hours for each of X, Y and Z directions)
Shock resistance 500 ㎨ 3 times to each of X, Y and Z directions
Degree of protection IP67 (IEC 60529)
Connection structure ● Cable type (standard cable length 2 m), ● Pin Connector type, ● Connector type
Color ● NPN : green ● PNP : navy
Material ● Case : brass (chrome plating), ● Sensing surface : PBT, ● Cable holder : polyester elastomer
Cable 120 120 140 140
Weight (g) Pin Connector 80 80 100 100
Connector 60 60 80 80

76
 Proximity Sensors
● Inductive DC 3 wire type
NPN UP30RM-10N□□ UP30RD-15N□□ UP30RLM-10N□□ UP30RLD-15N□□
Model
PNP UP30RM-10P□□ UP30RD-15P□□ UP30RLM-10P□□ UP30RLD-15P□□

Columnar
Appearance

Square
Shield Shield Non shield Shield Non shield
Standard sensing object (㎜) Iron 30×30×1 Iron 45×45×1 Iron 30×30×1 Iron 45×45×1
Sensing distance 10 ㎜ 15 ㎜ 10 ㎜ 15 ㎜ Thin

Setting distance 0~8㎜ 0 ~ 12 ㎜ 0~8㎜ 0 ~ 12 ㎜

Hysteresis Less than 10% of sensing distance Capacitive
Type
Response frequency 250 Hz 100 Hz 250 Hz 100 Hz
Power voltage 12-24 V d.c. (Usable voltage range 5 - 35 V d.c.)
Connector
Control output 200 ㎃ max (Resistive load) Cable
Residual voltage Max. 1.5 V
Current consumption Max. 6 ㎃
Operation indication Red LED
Protection circuit ● Power reverse connection protection circuit, ● Surge protection circuit, ● Over-current protection circuit built in
Ambient temperature & humidity -25 ~ 70 ℃ (Less than ±10 % of sensing distance at temperature 20 ℃), 35 ~ 85 %RH
Insulation resistance Min. 50 ㏁ (500 V d.c. mega standard)
Dielectric strength 2000 V a.c. 50/60 ㎐ for 1 min (between the recharging part and case)
Vibration resistance 10 - 55 ㎐ (1 min cycle, double amplitude : 1.5 ㎜ 2 hours for each of X, Y and Z directions)
Shock resistance 500 ㎨ 3 times to each of X, Y and Z directions
Degree of protection IP67 (IEC 60529)
Connection structure ● Cable type (standard cable length 2 m), ● Pin Connector type, ● Connector type
Color ● NPN : green ● PNP : navy
Material ● Case : brass (chrome plating) ● Sensing surface : PBT ● Cable holder : polyester elastomer
Cable 170 170 220 220
Weight (g) Pin Connector 130 130 180 180
Connector 150 150 200 200

● Inductive DC 2 wire type (Polarity / No polarity)

Polar UP8RM-1.5T□□ UP8RD-2T□□ UP12RM-2T□□ UP12RD-4T□□
Model
No polarity - - UP12RM-2U□□ UP12RD-4U□□

Appearance

Shield Shield Non shield Shield Non shield

Standard sensing object (㎜) Iron 8×8×1 Iron 8×8×1 Iron 12×12×1 Iron 12×12×1
Sensing distance 1.5 ㎜ 2㎜ 2㎜ 4㎜
Setting distance 0 ~ 1.2 ㎜ 0 ~ 1.6 ㎜ 0 ~ 1.6 ㎜ 0 ~ 3.2 ㎜
Hysteresis Less than 10% of sensing distance
Response frequency 800 Hz 800 Hz 800 Hz 400 Hz
Power voltage 12-24 V d.c. (Usable voltage range 5 - 30 V d.c.)
Control output 100 ㎃ max (Resistive load)
Residual voltage ● T(Polarity) : max. 3.5 V ● U(No polarity) : max. 5 V
Leakage current Max. 1 ㎃
Operation indication Red LED
Protection circuit Surge protective circuit and over current protective circuit are built-in.
Ambient temperature & humidity -25 ~ 70 ℃ (Less than ±10 % of sensing distance at temperature 20 ℃), 35 ~ 85 % RH
Insulation resistance Min. 50 ㏁ (500 V d.c. mega standard)
Dielectric strength 2,000 V a.c. 50/60 Hz for 1 min (between the recharging part and case)
Vibration resistance 10 - 55 ㎐ (1 min cycle, double amplitude: 1.5 ㎜ 2 hours for each of X, Y and Z directions)
Shock resistance 500 ㎨ 3 times to each of X, Y and Z directions
Degree of protection IP67 (IEC 60529)
Connection structure ● Cable type (standard cable length 2 m), ● Pin Connector type, ● Connector type
Color ● NO : green ● NC : navy
● Case: stainless ● Sensing surface: PBT ● Case: brass (chrome plating) ● Sensing surface: PBT
Material
● Cable holder : polyester elastomer ● Cable holder : polyester elastomer
Cable 60 70
Weight (g) Pin Connector None 30
Connector None 30

77
 PROXIMITY SENSORS
● Inductive DC 2 wire type (Polarity / No polarity)
Polar UP18RM-5T□□ UP18RD-8T□□ UP18RLM-5T□□ UP18RLD-8T□□
Model
No polarity UP18RM-5U□□ UP18RD-8U□□ UP18RLM-5U□□ UP18RLD-8U□□

Appearance

Shield Shield Non shield Shield Non shield

Standard sensing object (㎜) Iron 18×18×1 Iron 25×25×1 Iron 18×18×1 Iron 25×25×1
Sensing distance 5㎜ 8㎜ 5㎜ 8㎜
Setting distance 0~4㎜ 0 ~ 6.4 ㎜ 0~4㎜ 0 ~ 6.4 ㎜
Hysteresis Less than 10% of sensing distance
Response frequency 350 Hz 200 Hz 350 Hz 200 Hz
Power voltage 12-24 V d.c. (Usable voltage range 5 - 30 V d.c.)
Control output 100 ㎃ max (Resistive load)
Residual voltage ● T (Polarity) : max. 3.5 V, ● U (no polarity): max. 5 V
Leakage current Max. 1 ㎃
Operation indication Red LED
Protection circuit Surge protective circuit and over current protective circuit are built-in.
Ambient temperature & humidity -25 ~ 70 ℃ (Less than ±10 % of sensing distance at temperature 20 ℃), 35 ~ 85 % RH
Insulation resistance Min. 50 ㏁ (500 V d.c. mega standard)
Dielectric strength 2,000 V a.c. 50/60 Hz for 1 min (between the recharging part and case)
Vibration resistance 10 - 55 ㎐ (1 min cycle, double amplitude : 1.5 ㎜ 2 hours for each of X, Y and Z directions)
Shock resistance 500 ㎨ 3 times to each of X, Y and Z directions
Degree of protection IP67 (IEC 60529)
Connection structure ● Cable type (standard cable length 2 m),● Pin Connector type, ● Connector type
Color ● NO : green ● NC : navy
Material ● Case : brass (chrome plating) ● Sensing surface : PBT ● Cable holder : polyester elastomer
Cable 120 120 140 140
Weight (g) Pin Connector 80 80 100 100
Connector 60 60 80 80

● Inductive DC 2 wire type (Polarity / No polarity)

Polar UP30RM-10T□□ UP30RD-15T□□ UP30RLM-10T□□ UP30RLD-15T□□
Model
No polarity UP30RM-10U□□ UP30RD-15U□□ UP30RLM-10U□□ UP30RLD-15U□□

Appearance

Shield Shield Non shield Shield Non shield

Standard sensing object (㎜) Iron 30×30×1 Iron 45×45×1 Iron 30×30×1 Iron 45×45×1
Sensing distance 10 ㎜ 15 ㎜ 10 ㎜ 15 ㎜
Setting distance 0~8㎜ 0 ~ 12 ㎜ 0~8㎜ 0 ~ 12 ㎜
Hysteresis Less than 10% of sensing distance
Response frequency 250 Hz 100 Hz 250 Hz 100 Hz
Power voltage 12-24 V d.c. (Usable voltage range 5 - 30 V d.c.)
Control output 100 ㎃ max (Resistive load)
Residual voltage ● T (polarity): max. 3.5 V, ● U (no polarity): max. 5 V
Leakage current Max. 1 ㎃
Operation indication Red LED
Protection circuit Surge protective circuit and over current protective circuit are built-in.
Ambient temperature & humidity -25 ~ 70 ℃ (Less than ±10 % of sensing distance at temperature 20 ℃), 35 ~ 85 % RH
Insulation resistance Min. 50 ㏁ (500 V d.c. mega standard)
Dielectric strength 2,000 V a.c. 50/60 Hz for 1 min (between the recharging part and case)
Vibration resistance 10 - 55 ㎐ (1 min cycle, double amplitude : 1.5 ㎜ 2 hours for each of X, Y and Z directions)
Shock resistance 500 ㎨ 3 times to each of X, Y and Z directions
Degree of protection IP67 (IEC 60529)
Connection structure ● Cable type (standard cable length 2 m),● Pin Connector type, ● Connector type
Color ● NO : green ● NC : navy
Material ● Case : brass (chrome plating) ● Sensing surface : PBT ● Cable holder: polyester elastomer
Cable 170 220
Weight (g) Pin Connector 130 180
Connector 150 200

78
 Proximity Sensors
● Inductive AC 2 wire type
Model UP12RM-2A□□ UP12RD-4A□□

Columnar
Appearance

Square

Shield Shield Non shield

Standard sensing object (㎜) Iron 12×12×1
Thin
Sensing distance 2㎜ 4㎜
Setting distance 0 ~ 1.6 ㎜ 0 ~ 3.2 ㎜
Capacitive
Hysteresis Less than 10 % of sensing distance Type
Response frequency 20 Hz
Power voltage 100–240 V a.c. 50-60 Hz (Usable voltage range 90 - 250 V a.c. 50-60 Hz) Connector
Cable
Control output 200 ㎃ max (Resistive load)
Residual voltage Max. 10 V
Leakage current Max. 2.2 ㎃
Operation indication Red LED
Protection circuit Surge protective circuit built-in.
Ambient temperature & humidity -25 ~ 70 ℃ (less than ±10 % of sensing distance at temperature 20 ℃), 35 ~ 85 %RH
Insulation resistance Min. 50 ㏁ (500 V d.c. mega standard)
Dielectric strength 2,000 V a.c. 50/60 Hz for 1 min (between the recharging part and case)
Vibration resistance 10 - 55 ㎐ (1 min cycle, double amplitude: 1.5 ㎜ 2 hours for each of X, Y and Z directions)
Shock resistance 500 ㎨ 3 times to each of X, Y and Z directions
Degree of protection IP67 (IEC 60529)
Connection structure ● Cable type (standard cable length 2 m), ● Pin Connector type, ● Connector type
Color ● NO : green ● NC : navy
Material ● Case : brass (chrome plating) ● Sensing surface : PBT ● Cable holder : polyester elastomer
Cable 70 70
Weight (g) Pin Connector 30 30
Connector 30 30

● Inductive AC 2 wire type

Model UP18RM-5A□□ UP18RD-8A□□ UP18RLM-5A□□ UP18RLD-8A□□

Appearance

Shield Shield Non shield Shield Non shield

Standard sensing object (㎜) Iron 18×18×1 Iron 25×25×1 Iron 18×18×1 Iron 25×25×1
Sensing distance 5㎜ 8㎜ 5㎜ 8㎜
Setting distance 0~4㎜ 0 ~ 6.4 ㎜ 0~4㎜ 0 ~ 6.4 ㎜
Hysteresis Less than 10 % of sensing distance
Response frequency 20 Hz
Power voltage 100–240 V a.c. 50-60 Hz (Usable voltage range 90 - 250 V a.c. 50-60 Hz)
Control output Max. 200 ㎃ (resistive load)
Residual voltage Max. 10 V
Leakage current Max. 2.2 ㎃
Operation indication Red LED
Protection circuit Surge protective circuit built-in.
Ambient temperature & humidity -25 ~ 70 ℃ (less than ±10 % of sensing distance at temperature 20 ℃), 35 ~ 85 %RH
Insulation resistance Min. 50 ㏁ (500 V d.c. mega standard)
Dielectric strength 2000 V a.c. 50/60 ㎐ for 1 min (between the recharging part and case)
Vibration resistance 10 - 55 ㎐ (1 min cycle, double amplitude : 1.5 ㎜ 2 hours for each of X, Y and Z directions)
Shock resistance 500 ㎨ 3 times to each of X, Y and Z directions
Degree of protection IP67 (IEC 60529)
Connection structure ● Cable type (standard cable length 2 m), ● Pin Connector type, ● Connector type
Color ● NO : green ● NC : navy
Material ● Case : brass (chrome plating) ● Sensing surface : PBT ● Cable holder : polyester elastomer
Cable 120 140
Weight (g) Pin Connector 80 100
Connector 60 80

79
 PROXIMITY SENSORS
● Inductive AC 2 wire type
Model UP30RM-10A□□ UP30RD-15A□□ UP30RLM-10A□□ UP30RLD-15A□□

Appearance

Shield Shield Non shield Shield Non shield

Standard sensing object (㎜) Iron 30×30×1 Iron 45×45×1 Iron 30×30×1 Iron 45×45×1
Sensing distance 10 ㎜ 15 ㎜ 10 ㎜ 15 ㎜
Setting distance 0~8㎜ 0 ~ 12 ㎜ 0~8㎜ 0 ~ 12 ㎜
Hysteresis Less than 10 % of sensing distance
Response frequency 20 Hz
Power voltage 100–240 V a.c. 50-60 Hz (Usable voltage range 90 - 250 V a.c. 50-60 Hz)
Control output Max. 200 ㎃ (Resistive load)
Residual voltage Max. 10 V
Leakage current Max. 2.2 ㎃
Operation indication Red LED
Protection circuit Surge protective circuit built-in.
Ambient temperature & humidity -25 ~ 70 ℃ (Less than ±10 % of sensing distance at temperature 20 ℃), 35 ~ 85 % RH
Insulation resistance Min. 50 ㏁ (500 V d.c. mega standard)
Dielectric strength 2000 V a.c. 50/60 ㎐ for 1 min (between the recharging part and case)
Vibration resistance 10 - 55 ㎐ (1 min cycle, double amplitude: 1.5 ㎜ 2 hours for each of X, Y and Z directions)
Shock resistance 500 ㎨ 3 times to each of X, Y and Z directions
Degree of protection IP67 (IEC 60529)
Connection structure ● Cable type (standard cable length 2 m), ● Pin Connector type, ● Connector type
Color ● NO : green ● NC : navy
Material ● Case : brass (chrome plating) ● Sensing surface : PBT ● Cable holde r: polyester elastomer
Cable 170 170 220 220
Weight (g) Pin Connector 130 130 180 180
Connector 150 150 200 200

Suffix code (Round type)

Model Code Content
UP □ □ □ □ □ □ Inductive Type Proximity Sensor
8 M8
Sensing 12 M12
area size 18 M18
30 M30
RM Round type Shield
RD Round type Non Shield
Structure type
RLM Long round type Shield (M8 and M12 are excluded)
RLD Long round type Non Shield (M8 and M12 are excluded)
1.5 only with UP8-RM1.5
2 only with UP8-RD2, UP12-RM2
4 only with UP12-RD4
Sensing distance 5 only with UP18-RM5, UP18-RLM5
8 only with UP18-RD8, UP18-RLD8
10 only with UP30-RM10, UP30-RLM10
15 only with UP30-RD15, UP30-RLD15
N DC NPN output
P DC PNP output
Power and output type A AC 2 wire type
T DC 2 wire type (polarity)
U DC 2 wire type (no polarity) ※ But M8 is excluded
A Normal Open (N.O)
Output state
C Normal Close (N.C)
None (Cable type)
Connection structure CR Pin Connector type
C Connector type
※ Note) M8(8)8) type is cable type only.

80
 Proximity Sensors

UP series
Specifications Columnar

● Inductive DC 3 wire type

NPN UP12S-4N □ □ UP18S-5N □ □ UP18S-8N □ □ Square
Model
PNP UP12S-4P □ □ UP18S-5P □ □ UP18S-8P □ □

Thin

Appearance
Capacitive
Type

Standard sensing object(㎜) Iron 12X12X1 Iron 18X18X1 Iron 25X25X1

Connector
Sensing distance 4㎜ 5㎜ 8㎜ Cable

Setting distance 0 ~ 3.2 ㎜ 0~4㎜ 0 ~ 6.4 ㎜

Hysteresis Less than 10 % of sensing distance
Response frequency 800 ㎐ 350 ㎐ 250 ㎐
Power voltage 12-24 V d.c. (Usable voltage range 5 - 35 V d.c.)
Control Open/Close capacitance 200 ㎃ max (Resistive load)
output Residual voltage Max. 1.5 V
Current consumption Max. 6 ㎃
Operation indication Red LED
Protective circuit ● Power reversely connected protective circuit, ● Surge protective circuit and over current protective circuit are built-in.
Degree of protection IP67 (IEC 60529)
Connection structure ● Cable type (standard cable length 2 m), ● Pin Connector type
Ambient temperature & humidity -25 ~ 70 ℃ (Less than ±10 % of sensing distance at temperature 20 ℃), 35 ~ 85 %RH
Insulation resistance Min. 50 ㏁ (500 V d.c. mega standard)
Dielectric strength 2000 V a.c. 50/60 ㎐ for 1 min (between the recharging part and case)
Vibration resistance 10 ~ 55 ㎐ (1 min cycle, double amplitude : 1.5 mm 2 hours for each of X, Y and Z directions)
Shock resistance 500 ㎨ 3 times to each of X, Y and Z directions
Material ● Case : PBT resin, ● Cable holder : polyester elastomer
Cable type 45 60 60
Weight(g)
Pin Connector type 15 20 20

● Inductive DC 3 wire type

NPN UP25S-5N □ □ UP25S-8N □ □ UP25S-12N □ □ UP30S-10N □ □ UP30S-15N □ □ UP40S-20N □ □
Model
PNP UP25S-5P □ □ UP25S-8P □ □ UP25S-12P □ □ UP30S-10P □ □ UP30S-15P □ □ UP40S-20P □ □

Appearance

Standard sensing object(㎜) Iron 25 X 25 X 1 Iron 30 X 30 X 1 Iron 35 X 35 X 1 Iron 30 X 30 X 1 Iron 45 X 45 X 1 Iron 60 X 60 X 1

Sensing distance 5㎜ 8㎜ 12 ㎜ 10 ㎜ 15 ㎜ 20 ㎜
Setting distance 0~4㎜ 0 ~ 6.4 ㎜ 0 ~ 9.6 ㎜ 0~8㎜ 0 ~ 12 ㎜ 0 ~ 16 ㎜
Hysteresis Less than 10% of sensing distance
Response frequency 350 ㎐ 250 ㎐ 200 ㎐ 250 ㎐ 100 ㎐ 100 ㎐
Power voltage 12-24 V d.c. (Usable voltage range 5 - 35 V d.c.)
Control Open/Close capacitance 200 ㎃ max (Resistive load)
output Residual voltage Max. 1.5 V
Current consumption Max. 6 ㎃
Operation indication Red LED
Protective circuit ● Power reversely connected protective circuit, ● Surge protective circuit and over current protective circuit are built-in.
Degree of protection IP67 (IEC 60529)
Connection structure ● Cable type (standard cable length 2 m), ● Pin Connector type
Ambient temperature & humidity -25 ~ 70 ℃ (less than ±10 % of sensing distance at temperature 20 ℃), 35 ~ 85 % RH
Insulation resistance Min. 50 ㏁ (500 V d.c. mega standard)
Dielectric strength 2,000Va.c. 50/60 Hz for 1 min (between the recharging part and case)
Vibration resistance 10 ~ 55 ㎐ (1 min cycle, double amplitude : 1.5 mm 2 hours for each of X, Y and Z directions)
Shock resistance 500 ㎨ 3 times to each of X, Y and Z directions
Material ● Case : PBT resin, ● Cable holder : polyester elastomer
Cable type 80 80 80 90 90 110
Weight(g)
Pin Connector type 40 40 40 60 60 80

81
 PROXIMITY SENSORS
● Inductive DC 2 wire type
NPN UP12S-4T □ □ UP18S-5T □ □ UP18S-8T □ □
Model
PNP UP12S-4U □ □ UP18S-5U □ □ UP18S-8U □ □

Appearance

Standard sensing object(㎜) Iron 12X12X1 Iron 18X18X1 Iron 25X25X1

Sensing distance 4㎜ 5㎜ 8㎜
Setting distance 0 ~ 3.2 ㎜ 0~4㎜ 0 ~ 6.4 ㎜
Hysteresis Less than 10 % of sensing distance
Response frequency 500 ㎐ 350 ㎐ 250 ㎐
Power voltage 12-24 V d.c. (Usable voltage range 5 - 30 V d.c.)
Control Open/Close capacitance Max. 100 ㎃ (resistive load)
output Residual voltage ● T(Polarity) : max. 3.5 V ● U(No polarity) : max. 5 V
Current consumption 1 ㎃ or less
Operation indication Red LED
Protective circuit ● Power reversely connected protective circuit, ● Surge protective circuit and over current protective circuit are built-in.
Degree of protection IP67 (IEC 60529)
Connection structure ● Cable type (standard cable length 2 m), ● Pin Connector type
Ambient temperature & humidity -25 ~ 70 ℃ (less than ±10 % of sensing distance at temperature 20 ℃), 35 ~ 85 %RH
Insulation resistance Min. 50 ㏁ (500 V d.c. mega standard)
Dielectric strength 2000 V a.c. 50/60 ㎐ for 1 min (between the recharging part and case)
Vibration resistance 10 ~ 55 ㎐ (1 min cycle, double amplitude: 1.5 mm 2 hours for each of X, Y and Z directions)
Shock resistance 500 ㎨ 3 times to each of X, Y and Z directions
Material ● Case : PBT resin, ● Cable holder : polyester elastomer
Cable type 45 60 60
Weight(g)
Pin Connector type 15 20 20

● Inductive DC 2 wire type

NPN UP25S-5T □ □ UP25S-8T □ □ UP25S-12T □ □ UP30S-10T □ □ UP30S-15T □ □ UP40S-20T □ □
Model
PNP UP25S-5U □ □ UP25S-8U □ □ UP25S-12U □ □ UP30S-10U □ □ UP30S-15U □ □ UP40S-20U □ □

Appearance

Standard sensing object(㎜) Iron 25 X 25 X 1 Iron 30 X 30 X 1 Iron 35 X 35 X 1 Iron 30 X 30 X 1 Iron 45 X 45 X 1 Iron 60 X 60 X 1

Sensing distance 5㎜ 8㎜ 12 ㎜ 10 ㎜ 15 ㎜ 20 ㎜
Setting distance 0~4㎜ 0 ~ 6.4 ㎜ 0 ~ 9.6 ㎜ 0~8㎜ 0 ~ 12 ㎜ 0 ~ 16 ㎜
Hysteresis Less than 10 % of sensing distance
Response frequency 350 ㎐ 250 ㎐ 200 ㎐ 250 ㎐ 100 ㎐ 100 ㎐
Power voltage 12-24 V d.c. (usable voltage range 5 - 30 V d.c.)
Control Open/Close capacitance Max. 100 ㎃ (resistive load)
output Residual voltage ● T (polarity): max. 3.5 V ● U (Non polarity): max. 5 V
Current consumption Max. 1 ㎃
Operation indication Red LED
Protective circuit ● Power reversely connected protective circuit, ● Surge protective circuit and over current protective circuit are built-in.
Degree of protection IP67 (IEC 60529)
Connection structure ● Cable type (standard cable length 2 m), ● Pin Connector type
Ambient temperature & humidity -25 ~ 70 ℃ (less than ±10 % of sensing distance at temperature 20 ℃), 35 ~ 85 %RH
Insulation resistance Min. 50 ㏁ (500 V d.c. mega standard)
Dielectric strength 2000 V a.c. 50/60 ㎐ for 1 min (between the recharging part and case)
Vibration resistance 10 ~ 55 ㎐ (1 min cycle, double amplitude : 1.5 mm 2 hours for each of X, Y and Z directions)
Shock resistance 500 ㎨ 3 times to each of X, Y and Z directions
Material ● Case : PBT resin, ● Cable holder : polyester elastomer
Cable type 80 80 80 90 90 110
Weight(g)
Pin Connector type 40 40 40 60 60 80

82
 Proximity Sensors
● Inductive AC 2 wire type
Model For AC UP25S-5A □ □ UP25S-8A □ □ UP30S-10A □ □

Columnar

Appearance

Square

Standard sensing object(㎜) Iron 25 X 25 X 1 Iron 30 X 30 X 1

Sensing distance 5㎜ 8㎜ 10 ㎜
Thin
Setting distance 0~4㎜ 0 ~ 6.4 ㎜ 0~8㎜
Hysteresis Less than 10% of sensing distance
Capacitive
Response frequency 20 ㎐ Type
Power voltage 100–240 V a.c. 50-60 Hz (Usable voltage range 90 – 250 V a.c.50-60 Hz)
Control Open/Close capacitance Max. 200 ㎃ (resistive load) Connector
output Residual voltage Max. 10 V a.c. Cable

Current consumption Max. 2.2 ㎃

Operation indication Red LED
Protective circuit Surge protective circuit is built-in.
Degree of protection IP67 (IEC 60529)
Connection structure ● Cable type (standard cable length 2 m), ● Pin Connector type
Ambient temperature & humidity -25 ~ 70 ℃ (less than ±10 % of sensing distance at temperature 20 ℃), 35 ~ 85 %RH
Insulation resistance Min. 50 ㏁ (500 V d.c. mega standard)
Dielectric strength 2,000 V a.c. 50/60 Hz for 1 min (between the recharging part and case)
Vibration resistance 10 ~ 55 ㎐ (1 min cycle, double amplitude : 1.5 mm 2 hours for each of X, Y and Z directions)
Shock resistance 500 ㎨ X・Y・Z 3 times to each of X, Y and Z directions
Material ● Case : PBT resin, ● Cable holder : polyester elastomer
Cable type 80 80 90
Weight(g)
Pin Connector type 40 40 80

● Inductive AC 2 wire type

Model For AC UP30S-15A □ □ UP40S-20A □ □

Appearance

Standard sensing object(㎜) Iron 45 X 45 X 1 Iron 60 X 60 X 1

Sensing distance 15 ㎜ 20 ㎜
Setting distance 0 ~ 12 ㎜ 0 ~ 16 ㎜
Hysteresis Less than 10% of sensing distance
Response frequency 20 ㎐
Power voltage 100–240 V a.c. 50-60 Hz (Usable voltage range 90 – 250 V a.c.50-60 Hz)
Control Open/Close capacitance Max. 200 ㎃ (resistive load)
output Residual voltage Max. 10 V a.c.
Current consumption Max. 2.2 ㎃
Operation indication Red LED
Protective circuit Surge protective circuit is built-in.
Degree of protection IP67 (IEC 60529)
Connection structure ● Cable type (standard cable length 2 m), ● Pin Connector type
Ambient temperature & humidity -25 ~ 70 ℃ (less than ±10 % of sensing distance at temperature 20 ℃), 35 ~ 85 %RH
Insulation resistance Min. 50 ㏁ (500 V d.c. mega standard)
Dielectric strength 2,000 V a.c. 50/60 Hz for 1 min (between the recharging part and case)
Vibration resistance 10 ~ 55 ㎐ (1 min cycle, double amplitude: 1.5 mm 2 hours for each of X, Y and Z directions)
Shock resistance 500 ㎨ 3 times to each of X, Y and Z directions
Material ● Case : PBT resin, ● Cable holder : polyester elastomer
Cable type 90 110
Weight(g)
Pin Connector type 60 80

83
 PROXIMITY SENSORS
Suffix code(Square type)
Model Code Content
UP □ □ □ □ □ □ □ Inductive Type Proximity Sensor
12 12(W) × 12(H) ㎜
18 18(W) × 18(H) ㎜
Sensing
25 25(W) × 25(H) ㎜
area size
30 30(W) × 30(H) ㎜
40 40(W) × 40(H) ㎜
Structure type S Square type
2 2 ㎜ (only with UP8S-2)
4 4 ㎜ (only with UP12S-4 )
5 5 ㎜ (only with UP18S-5, UP25S-5)
8 8 ㎜ (only with UP18S-8, UP25S-8)
Sensing distance
10 10 ㎜ (only with UP30S-10)
12 12 ㎜ (only with UP25S-12)
15 15 ㎜ (only with UP30S-15)
20 20 ㎜ (only with UP40S-20)
N DC NPN output
P DC PNP output
Power and output type A AC 2 wire type (but UP18S is excluded)
T DC 2 wire type (polarity)
U DC 2 wire type (no polarity)
A Normal Open (NO)
Output state
C Normal Close (NC)
Detect Front side
Sensing direction
U Detect upper side (only available with the square type UP18S)
Cable type
Connection structure
CR Pin Connector type

UP series
Specifications
● Inductive DC 3 wire type / 2 wire type
DC 3 wire type DC 2 wire type
Model NPN UP25F-8N□□ Polarity UP25F-8T□□
PNP UP25F-8P□□ No polarity UP25F-8U□□

Appearance

Standard sensing object(㎜) Iron 25 X 25 X 1

Sensing distance 8㎜
Setting distance 0 ~ 6.4 ㎜
Hysteresis Less than 10 % of sensing distance
Response frequency 200 ㎐
Power voltage 12-24 V d.c. (Usable voltage range 5 – 35 V d.c.) 12-24 V d.c. (Usable voltage range 5 – 30 V d.c.)
Control output 200 ㎃ max (Resistive load) 100 ㎃ max (Resistive load)
Residual voltage Max. 1.5 V ● Polarity : max. 3.5 V, ● No polarity : max. 5 V
Current consumption Max. 6 mA -
Leakage current - Max. 1 mA
Operation indication Red LED
● Power reversely connected protective circuit,
● surge protective circuit and over current
Protection circuit ● surge protective circuit and over current
protective circuit are built-in.
protective circuit are built-in.
Ambient temperature & humidity -25 ~ 70 ℃ (less than ±10 % of sensing distance at temperature 20 ℃), 35 ~ 85 %RH
Insulation resistance Min. 50 ㏁ (500 V d.c. mega standard)
Dielectric strength 2,000 V a.c. 50/60 Hz for 1 min (between the recharging part and case)
Vibration resistance 10 - 55 ㎐ (1 min cycle, double amplitude: 1.5 ㎜ 2 hours for each of X, Y and Z directions)
Shock resistance 500 ㎨ X・Y・Z 3 times to each of X, Y and Z directions
Degree of protection IP67 (IEC 60529)
Connection structure ● Cable type (standard cable length 2 m), ● Pin Connector type
Color ● Polarity : green ● No polarity : navy
Material ● Case : PBT resin ● Cable holder: polyester elastomer
Cable type 60 60
Weight(g)
Pin Connector type 20 20

84
 Proximity Sensors
● Inductive AC 2 wire type
Model UP25F-8A□□

Appearance Columnar

Standard sensing object(㎜) Iron 25 X 25 X 1 Square

Sensing distance 8㎜

Setting distance 0 ~ 6.4 ㎜ Thin

Hysteresis Less than 10 % of sensing distance

Capacitive
Response frequency 20 ㎐ Type

Power voltage 100–240 V a.c. 50-60 Hz (usable voltage range 90-250 V a.c. 50-60 Hz)
Connector
Control output Max. 200 ㎃ (resistive load) Cable

Residual voltage Max. 10 V a.c.

Leakage current Max. 2.2 ㎃

Operation indication Red LED

Protection circuit Surge protective circuit built-in.

Ambient temperature & humidity -25 ~ 70 ℃ ((less than ±10 % of sensing distance at temperature 20 ℃), 35 ~ 85 % RH

Insulation resistance Min. 50 ㏁ (500V d.c. mega standard)

Dielectric strength 2,000 V a.c. 50/60 ㎐ for 1 min (between the recharging part and case)

Vibration resistance 10 - 55 ㎐ (1 min cycle, double amplitude : 1.5 ㎜ 2 hours for each of X, Y and Z directions)

Shock resistance 500 ㎨ 3 times to each of X, Y and Z directions

Degree of protection IP67 (IEC 60529)

Connection structure ● Cable type (standard cable length 2 m), ● Pin Connector type

Color ● NO : green, ● NC : navy

Material ● Case : PBT resin ● Cable holder : polyester elastomer

Cable type 60
Weight(g)
Pin Connector type 20

Suffix code (Flat type)

Model Code Content

UP □ □ □ □ □ □ Inductive Type Proximity Sensor

Sensing area size 25 Please refer to the dimension (25.7×49.0×10.5)

Structure type F Flat Type

Sensing distance 8 8㎜

N DC NPN output

P DC PNP output

Power and output type A AC 2 wire type

T DC 2 wire type (polarity)

U DC 2 wire type (no polarity)

A Normal Open (NO)

Output state
C Normal Close (NC)

None (Cable type)

Connection structure
CR Pin Connector

85
 PROXIMITY SENSORS

CUP series
Specifications
● Capacitive DC 3 wire type
NPN CUP18R-8N□□ CUP18RP-8N□□ CUP30R-15N□□ CUP30RP-15N□□
Model
PNP CUP18R-8P□□ CUP18RP-8P□□ CUP30R-15P□□ CUP30RP-15P□□

Appearance

Shield Non shield

Standard sensing object (㎜) Iron 50 X 50 X 1 (Grounded <earthed> state)
Sensing distance 8 ㎜ (Volume variation) 15 ㎜ (Volume variation)
Setting distance 0 ~ 6.4 ㎜ 0 ~ 12 ㎜
Hysteresis Less than 20 % of sensing distance
Response frequency 50Hz
Power voltage 12-24 V d.c. (Usable voltage range 10 - 30 V d.c.)
Control output 200 ㎃ max (Resistive load)
Residual voltage Max. 1.5 V
Current consumption Max. 10 ㎃
Operation indication Red LED
Protection circuit Power reversely connected protective circuit, surge protective circuit and over current protective circuit are built-in.
Ambient temperature & humidity -25 ~ 70 ℃ (less than ±10 % of sensing distance at temperature 20 ℃), 35 ~ 85 %RH
Insulation resistance Min. 50 ㏁ (500 V d.c. mega standard)
Dielectric strength 2,000 V a.c. 50/60 Hz for 1 min (between the recharging part and case)
Vibration resistance 10 - 55 ㎐ (1 min cycle, double amplitude : 1.5 ㎜ 2 hours for each of X, Y and Z directions)
Shock resistance 500 ㎨ X・Y・Z 3 times to each of X, Y and Z directions
Degree of protection IP67 (IEC 60529)
Connection structure ● Cable type (standard cable length 2 m), ● Pin Connector type, ● Connector type
Color ● NPN : green ● PNP : navy
● CUP-18R/CUP-30R Case : brass (chrome plated) ● Detection surface : PBT
Material
● CUP-18RP/CUP-30RP Integrated casing and detection surface: PBT
Cable type 70 70 120 120
Weight(g)
Pin Connector type 30 30 80 80

● Capacitive type, DC/AC dual usage 2 wire type

Model CUP18R-8F□□ CUP18RP-8F□□ CUP30R-15F□□ CUP30RP-15F□□

Appearance

Shield Non shield

Standard sensing object(㎜) Iron 50 X 50 X 1 (Grounded <earthed> state)
Sensing distance 8 ㎜ (Volume variation) 15 ㎜ (Volume variation)
Setting distance 0 ~ 6.4 ㎜ 0 ~ 12 ㎜
Hysteresis Less than 20% of sensing distance
Response frequency ● DC : 40 ㎐ ● AC : 20 ㎐
Power voltage 20-240 V a.c. 50-60 Hz/20-240 V d.c. (usable voltage range 18-250 V a.c. 50-50 Hz, 250 V d.c.)
Control output Switching capacity : 5-250 ㎃d.c. or less (resistive load), residual voltage : 7 V or less (AC/DC)
Residual voltage Max. 7 V (AC/DC)
Leakage current Max. 2 ㎃
Operation indication Red LED
Protection circuit Surge protective circuit built-in.
Ambient temperature & humidity -25 ~ 70 ℃ (less than ±10 % of sensing distance at temperature 20 ℃), 35 ~ 85 %RH
Insulation resistance Min. 50 ㏁ (500 V d.c. mega standard)
Dielectric strength 2,000 V a.c. 50/60 Hz for 1 min (between the recharging part and case)
Vibration resistance 10 - 55 ㎐ (1 min cycle, double amplitude : 1.5 ㎜ 2 hours for each of X, Y and Z directions)
Shock resistance 500 ㎨ 3 times to each of X, Y and Z directions
Degree of protection IP67 (IEC 60529)
Connection structure ● Cable type (standard cable length 2 m), ● Pin Connector type, ● Connector type
Case Brass (Chrome plating) PTB resin Brass (Chrome plating) PTB resin
Color ● NO : green ● NC : navy NO/NC: green ● NO: green ● NC : navy NO/NC : green
● CUP-18R/CUP-30R (Case: brass chrome plating, sensing surface: PBT resin)
Material
● CUP-18RP/CUP-30RP (Case and sensing surface one body type: PBT resin)
Cable type 70 120
Weight(g)
Pin Connector type 30 80

86
 Proximity Sensors
Suffix code (Capacitive type)
Model Code Content
CUP - □ □ □ □ □ □ Capacitive Type Proximity Sensor
18 M18
Sensing area size
30 M30 Columnar
R Round type (Brass chrome plating case)
Structure type
RP Round type (Plastic case)
8 8 ㎜ (only with CUP-18□-8) Square
Sensing distance
15 15 ㎜ (only with CUP-30□-15)
N DC NPN output
Thin
Power and output type P DC PNP output
F AC/DC 2 wire type (dual usage) (no polarity)
A Normal Open (NO) Capacitive
Output state
C Normal Close (NC) Type

None (Cable type)

Connection structure
CR Pin Connector type Connector
Cable

Connector Cable
Specifications
Classification Appearance Model Cable length Usage power
AA2S-2M 2m
AC 2 wire
AA2S-5M 5m
AD3S-2M 2m
DC 3 wire
AD3S-5M 5m
AD2S-2M 2m
DC 2 wire
AD2S-5M 5m

AA2A-2M 2m
Connector
AC 2 wire
cable AA2A-5M 5m

AD3A-2M 2m
DC 3 wire
AD3A-5M 5m

AD2A-2M 2m
DC 2 wire
AD2A-5M 5m

BA4S-2M 2m
AC
BA4S-5M 5m
BD4S-2M 2m
DC
BD4S-5M 5m

BA4A-2M 2m
Relay
cable AC
BA4A-5M 5m

BD4A-2M 2m

DC
BD4A-5M 5m

Suffix code
Code Content
Model
□ □ □ □ □ Cable for Connecting proximity sensor
A Connector cable
Cable
B Relay cable
A AC
Operating Voltage
D DC
2 2 wires
Number of wires 3 3 wires
4 4 wires
S Straight type
Connector type
A Angle type
2M 2m
Cable length
5M 5m

87
 PHOTO SENSORS

PB series
Specifications
NEW

NPN PB-T7N PB-T10RN PB-T15N PB-M3RN PB-R01N PB-R04RN PB-R1N PB-D04N

Model
PNP PB-T7P PB-T10RP PB-T15P PB-M3RP PB-R01P PB-R04RP PB-R1P PB-D04P

Appearance

Mirror reflection Distance-

Sensing mode Through-beam Diffuse - reflective
type settable
Opaque object
Detecting object Opaque object (over Ø12 ㎜) White non-glossy paper (100 x 100 ㎜)
(over Ø75 ㎜)
Hysteresis None Max. 20% of sensing distance
Operation mode Light ON / Dark ON mode switching selection by VR

0.1 - 3 m
(when using HY-M5) /
Sensing distance 7m 10 m 15 m 100 mm 400 mm 1m 400 mm
0.1 - 4 m
(when using HY-M5S)

Response time Max. 1 ㎳

Sensitivity adjustment VR built-in
Power voltage 12-24 V d.c. ±10% Ripple(p-p)10% or less

Current Emitter Max. 20 ㎃

Max. 30 ㎃
consumption Receiver Max. 15 ㎃
Light source Infrared LED Infrared LED Infrared LED
Red LED Red LED Red LED Infrared LED (850 ㎚)
(wavelength) (850 ㎚) (850 ㎚) (850 ㎚)
Control output ● Load Current: max. 100mA (26.4 V d.c.) ● Residual voltage: max. 1 V
● Power reverse connection protection, ● Output reverse connection protection, ● Output short circuit protection,
Protection circuit
● Putual interference protection (except transmissive), ● Output short circuit notification (except floodgators)
LED Indicator ● Red LED : operation indicator, ● Green LED : stability indicator (However, the red LED of the emitter displays the power only)
Insulation resistance Min. 20 ㏁ (500 V d.c. mega standard)
Dielectric strength 1,000 V a.c. (50/60 ㎐ for 1 min)
Vibration resistance 10 - 55 ㎐, double amplitude : 1.5 ㎜, X・Y・Z each direction 2 hours
Shock resistance 500 ㎨, X・Y・Z each direction 3 times
Ambient illumination ● Sunlight : max. 11000 lx ● Incandescent lamp : max. 3000 lx
Ambient temperature &
● During operation : -20 ~ 60 ℃ ● During storage : -25 ~ 70 ℃, 35 ~ 85 % RH (without condensation or icing)
humidity
Noise immunity Square wave noise by noise simulator (pulse width 1 ㎲) ±240 V
Degree of protection IP65 (IEC 60529)
Accessories ● Bracket A, ● Bracket B(Order specification), ● Bracket C(Order specification)

Certified

Weight (g) 90 60 50

Suffix code
Model Code Content
PB- □ □ □ □ General Purpose Photo Sensor
7 7m
T 10 10 m Through - beam
15 15 m
Sensing mode M 3 3m Retro - reflective
and distance
01 0.1 m
R 04 0.4 m Diffuse - reflective)
1 1m
D 04 0.4 m Distance-settable
- Infrared LED
Light source
R Red LED (Note1)

N NPN open collector output

Output
P PNP open collector output

(Note1) Red light (R): T10, M3, P3, R04, only

88
 Photo Sensors

PY series
Specifications New product
Universal

NPN PY-T3N
Model
PNP PY-T3P
Thin

Voltage
output type

Appearance
Columnar

Horseshoe
Sensing mode Through - beam
Built-in
Detecting object Opaque object (over Ø5 ㎜) power
Built-in
Operation mode Light ON / Dark ON mode switching selection by control wire (only receiver) amplifier

Sensing distance 3m Distance

setting type
Response time Max. 1 ㎳
Long
Power voltage 12-24 V d.c. ± 10 % distance
Detection
Current Emitter Max. 10 ㎃ type

consumption Receiver Max. 15 ㎃

Optical fiber
Light source (wavelength) Infrared LED (850 ㎚)
● NPN or PNP open collector output, load current - max. 100 ㎃ (26.4 V d.c. standard),
Control output Area
● Residual voltage - NPN: max. 1V, PNP: max. 1V
● Power reverse protection circuit, output short circuit overcurrent protection circuit,
Protection circuit Sensor
● Output short circuit notification circuit (Note 1), ● Output failure notification circuit (Note 2)
Controller
LED Indicator ● Red LED : Control output, ● Green LED : stability indicator (however, the red LED of the emitter displays the power)

Insulation resistance Min. 20 ㏁ (500 V d.c. mega standard)

Dielectric strength 1,000 V a.c. (50/60 ㎐ for 1 min)

Vibration resistance 10 - 55 ㎐, Double amplitude : 1.5 ㎜, X・Y・Z each direction 2 hours

Shock resistance 500 ㎨, X・Y・Z each direction 3 times

Ambient illumination ● Sunlight: max. 11000 lx ● Incandescent lamp: max. 3000 lx

Ambient temperature & humidity ● During operation : -20 ~ 60 ℃ ● During storage : -25 ~ 70 ℃, 35 ~ 85 % RH (without condensation)

Degree of protection IP67 (IEC 60529)

Materials ● Case : PC ● Lens : PC

Connection Cable extended type

Weight (g) 66

(Note 1) Repeats red LED OFF for 38.4 ms after red LED turns on for 192 ㎲ during light-on
(Note 2) Turns OFF after red LED turns ON for 49 ㎳ during light-on

Suffix code
Model Code Content
PY - □ □ □ Flat Photo Sensor

Sensing mode T Through - beam

Sensing distance 3 3m

N NPN open collector output

Output
P PNP open collector output

89
 PHOTO SENSORS

PN series
Specifications
Model PN-T3 PN-R02 PN-M1

Appearance

Type Through - beam Diffuse - reflective Retro - reflective

Sensing distance 3m 200 ㎜ 0.1-1 m

Detecting object Opaque object (over Ø8 ㎜) White non-glossy paper (200 x 200 ㎜) Opaque object (over Ø48 ㎜)

Power voltage 12-24 V d.c. ±10 %

Current Emitter 20 ㎃ d.c.

Max. 30 mA d.c.
consumption Receiver 18 ㎃ d.c.

Operating mode Select Light On/Dark ON by Control Line (transmission type is only for the receiver).

Control Output ● NPN voltage output : Load voltage max. 30 V d.c., ● Load current : max. 200 mA , residual voltage : max. 1 V

Protection circuit Reverse polarity protection, overcurrent protection

Response time Max. 3 ㎳

Hysteresis - Not more than 20% of detection distance -

Light source (wavelength) Infrared LED (850 ㎚)

Sensitivity control By volume for sensitivity adjustment (except for transmissive floodlights)

Material Case and Lens : PC

● Cable withdrawal formula ● All competitors: 4P
Connection
● External diameter : 44 mm ● Length : 1.5 m (However, the projector is 3P)
Ambient light ● Sunlight : max. 11000 lx, ● Incandescent light : max. 3000 lx

Ambient temperature & humidity ● When operating : -25 to 55℃ ● Storage : -40 to 70℃, 35 to 85% RH (but there will be no condensation).

Degree of protection IP54 (IEC 60529)

Vibration resistance 10 - 55 ㎐, Double amplitude 1.5 ㎜, X・Y・Z each direction for 2 hours

Dielectric strength 1,000 V a.c. for 1 min

Insulation resistance 20 ㏁ or more (based on 500 V d.c. mega)

Accessories ● Bracket for fixing, ● Bolt, ● Nut for fixing

Weight (g) 250 150 100

※ The sensing distance can be varied depending on the size, surface condition, glossy, non-glossy of the sensing object
※ PN-TL3 is transmitter and PN-TR3 is receiver when it is Through-beam type

Suffix code
Model Code Content
PN - □ □ Photo Sensor

T 3 Through - beam
Sensing mode
M 1 Retro - reflective
and distance
R 02 Diffuse - reflective

Operation 12-24 V d.c. ±10 %

90
 Photo Sensors

PR series
Specifications New product
Universal
NPN PRM-T7RN PRM-T10N PRM-M2N PRM-R01N PRM-R04N
Metal
PNP PRM-T7RP PRM-T10P PRM-M2P PRM-R01P PRM-R04P
Model Thin
NPN PRP-T7RN PRP-T10N PRP-M2N PRP-R01N PRP-R04N
Plastic
PNP PRP-T7RP PRP-T10P PRP-M2P PRP-R01P PRP-R04P
Voltage
output type

Appearance
Columnar

Detection method Through - beam Retro - reflective Diffuse - reflective

Detection distance 7m 10 m 0.1 ~ 2 m (※Note1) 0.1 m 0.4 m
Horseshoe
Hysteresis distance - 20% or less of detection distance
Ø 25 mm or more Built-in
Detection object Ø 10 mm or more opaque White matte paper (100x100 mm) power
opaque Built-in
amplifier
Light source RED (640nm) IR (860nm) IR(860nm)
Current consumption ● Emitter : 20 mA, ● Receiver : 20 mA 30 mA 이하 Distance
setting type
Power supply voltage 12-24 V d.c. ±10% ripple (p-p) 10% or less
NPN or PNP open collector output Long
Control output
● Load current : 100 mA or less (based on 26.4 V d.c.) ● Residual voltage-NPN : 1 V or less, PNP: 1 V or less distance
Detection
Operation mode Light ON / Dark ON (by white line) type

● Power reverse connection protection, ● Output reverse connection protection,

Common
Protection circuit ● Output short circuit overcurrent protection, ● Output terminal notification (※Note2) Optical fiber

Individual - Mutual interference prevention function

Response time 1 ms or less
Area
Insulation Resistance 20 MΩ or more (based on 500 V d.c. mega)
Noise resistance Square wave noise by noise simulator (pulse width 1 ㎲) ±240 V
Sensor
Withstand voltage 1,000 V a.c. (50/60 Hz for 1 minute) Controller
Vibration resistance 10-55 Hz, dust amplitude: 1.5 mm, 2 hours each in X.Y.Z directions
Shock resistance 500 ㎨, X・Y・Z each direction 3 times
Ambient illuminance ● Sunlight : max. 11000 lx ● Incandescent lamp : max. 3000 lx (Light-receiving surface illuminance)
Ambient temperature ● During operation : -20 ~ 60 ℃ ● During storage : -25 ~ 70 ℃, 35 ~ 85 % RH (without condensation or icing)
Ambient Humidity 35 ~ 85 % RH (with no condensation)
Protection structure IP66 (IEC standard)

Acquisition standard

Case ● Metal: Gold plated, ● Plastic: Plastic

Material Display PC
Lens PC
● Metal: 2 fixing nuts, 1 washer, V/R adjustment driver
common
Accessories ● Plastic: 2 fixing nuts, V/R adjustment screwdriver
Individual - Mirror (HY-M5) -
● Metal : Approx. 320 g,
Weight ● Metal : Approx. 160 g, ● Plastic : Approx. 140 g
● Plastic : Approx. 280 g

(※ Note 1) Red light (R) : T7 only

(※ Note 2) Red LED blinks in case of overload (ON Time: 200 ㎲, OFF Time: 40 ㎲)

Suffix code
Model Code Content
PR □- □ □ □ □ Round Photo Sensor
M Metal
Case material
P Plastic
7 7m
T Through - beam
10 10 m
Detection method and
M 2 2m Retro - reflective
detection distance
01 0.1 m
R Diffuse - reflective
04 0.4 m
Infrared LED
Light source
R Red LED (※Note 1)
N NPN open collector output
Output
P PNP open collector output

(※ Note 1) Red light (R) : T7 only

91
 PHOTO SENSORS

PU series
Specifications
Model PU-30 PU-30S PU-50 PU-50S

Appearance

Sensing distance 30 ㎜ 50 ㎜
Detecting object Opaque object (over Ø2 ㎜) Opaque object (over Ø0.6 ㎜) Opaque object (over Ø1.5 ㎜) Opaque object (over Ø0.4 ㎜)
Power voltage 12-24 V d.c. ±10 %
Current consumption Max. 30 mA
Operating mode Selectable Light On/Dark On for reverse polarity
● NPN open collector output : Load voltage max. 300 V d.c., ● Load current : max. 180 mA,
Control Output
● Residual voltage: max. 2 V
Protection circuit Output short circuit
Response time Max.1 ms
Light source (wavelength) Infrared LED (940 ㎚)
Motion Indicator ● Output : Red LED, ● Power : Green LED
Sensitivity adjustment fix By volume fix By volume
Case Zn
Material
Lens PC
Connection type ● Cable pull-out type ● Number of wires : 3P ● Outer diameter : Ø4 ㎜ ● Length : 2m
Ambient light ● Sunlight: max. 11000 lx, ● Incandescent light: max. 3000 lx
Ambient temperature & humidity ● In operation : -20 ~ 60 ℃ ● Storage : -25~70 ℃, 35 ~ 85% RH (No condensation)
Degree of protection IP65 (IEC 60529)
Vibration resistance 10 - 55Hz, Double amplitude 1.5 ㎜, X・Y・Z each direction for 2 hours
Dielectric strength 1000 V a.c. for 1 min
Insulation resistance Min. 20 ㏁ (at 500 V d.c., between code and case, contact and power supply)
Weight (g) 250

PE series
Specifications
Model PE-T5D PE-R05D PE-M3D

Appearance

Detection method Through - beam Diffuse - reflective Retro - reflective

Sensing distance 5m 0.5 m 0.1 - 3 m
Detecting object Opaque object (over 20 ㎜) White non-glossy paper (200x200 ㎜) Opaque object (over Ø60 ㎜)
Power voltage 24Vd.c., 100-240 V a.c. 50/60Hz or 100-240 V d.c. ±10 %
Current Emitter max. 0.7 W
Max. 2 W Max. 1.6 W
consumption Receiver max. 1.2 W
Operation mode Dark ON Light ON Dark ON
Control Output Relay output 1c 250 V a.c. 2 A (resistive load)
Response time Max. 25 ms
Hysteresis - 20% or less of detection distance -
Light source (wavelength) Infrared LED (850 ㎚)
LED Indicator Control output indicator : Red LED (however, the through-beam emitter red LED is a power indicator)
Sensitivity control - By sensitivity control volume
Material Case and lens : PC
Connection ● Cable pull-out type, ● Number of wires : 5P, ● Outer diameter : Ø 6 ㎜, ● Length : 2 m (however, 2P for transmissive emitter)
Ambient light ● Sunlight : max. 11000 lx ● Incandescent light : max. 3000 lx
Ambient temperature & humidity ● In operation: -20 ~ 60 ℃ ● Storage: -25 ~ 70 ℃, 35 ~ 85% RH (No condensation)
Degree of protection IP54 (IEC 60529)
Vibration resistance 10 - 55 ㎐, double amplitude width 1.5 ㎜ , X・Y・Z, each direction for 2 hours
Dielectric strength 1,500Va.c. for 1 min
Insulation resistance 20㏁ or more (500 V d.c. Mega standard)
Accessories ● Bracket for fixing,● bolt, ● Nut for fixing
Weight (g) 120

92
 Photo Sensors

PTX series
Specifications New product
Universal
Type Normal Timer Built-in Normal Timer Built-in Normal Timer Built-in
Model Built-in Power Supply PTX-T15A PTX-T15A-T PTX-M7A PTX-M7A-T PTX-R1A PTX-R1A-T
Thin
Built-in Amplifier PTX-T15B PTX-T15B-T PTX-M7B PTX-M7B-T PTX-R1B PTX-R1B-T

Voltage
output type
Appearance

Columnar
Sensing Type Through - beam Retro - reflective Diffuse - reflective
Sensing distance 15 m 7m 1m
Horseshoe
Detecting object Opaque object (over Ø20 ㎜) Opaque object (over Ø60 ㎜) White non-glossy paper (200x200 ㎜)

Power Built-in Power Supply 24-240 V a.c. 50/60Hz or 24-240 V d.c. ±10 % Built-in
power
voltage Built-in Amplifier 12-24 V d.c. ± 10 % Built-in
amplifier
Built-in power : 2 W or less / Built-in amplifier
Emitter
Current : 35 ㎃ or less Distance
Built-in power : 2 W or less / Built-in amplifier: 45 ㎃ or less
Consumption Built-in power : 1 W or less / Built-in amplifier setting type
Transmitter
: 20 ㎃ or less
Long
● Relay contact output (contact configuration 1a, 1b (COM)), rated load life 100,000 times or more distance
Built-in Power Supply Detection
● Contact capacity : 30 V d.c. 5A / 250 V a.c. 5A resistive load type
Control Output
● NPN/PNP open collector simultaneous output ● Load current : 150 ㎃ d.c. Or less (resistive load)
Built-in Amplifier
● NPN current voltage : 1 V d.c. Below ● PNP current voltage : 2 V d.c. Below Optical fiber
Operation mode Light ON/Dark ON are selectable by the selector switch
Built-in Power Supply Max. 20 ms
Response time Area
Built-in Amplifier Max. 1 ms
Built-in Power Supply -
Hysteresis Less than 20 % of sensing distance Sensor
Built-in Amplifier - Controller

Built-in Power Supply ● Output indication: Red LED (Transmissive type emitter has 2 red LEDs for power indication) ● Stability indication : Green LED
LED Indicator
Built-in Amplifier ● Output indication : Red LED ● Stability indication : Green LED
Sensitivity adjustment - Sensitivity adjusting volume built-in

Protection Built-in Power Supply Surge protection

circuit Built-in Amplifier Reverse polarity protection and output-circuit protection
Timer function built-in (only Select OFF Delay, ON Delay or One Shot Delay by using the ON/OFF switch. Delay Time: 0.1~5 sec adjust by the volume.
corresponds to timer built-in type)
Ambient illumination ● Sunlight: max. 11000 lx ● Incandescent lamp: max. 3000 lx
Ambient temperature & humidity ● Operation temperature: -20 ~ 60 ℃, ● Storage temperature: -25 ~ 70 ℃, 35 ~ 85 % RH (without icing or dew condensation)
Degree of protection IP66 (IEC 60529)
Insulation resistance Min 20㏁ (standard on 500 V d.c. mega)
Dielectric strength 1,500 V a.c. (for 1 min)
Vibration resistance 10 - 55 Hz Double amplitude: 1.5 mm, 2 hours to each of X, Y, Z directions
Shock resistance 500 ㎨(approx. 50G), 3 times to each of X, Y, Z directions
Connection method Terminal
Material ● Case: ABS ● Lens: PC
Weight (g) 80
Individual - Reflector (HY-M5) -
Accessories
Common ● Driver, ● Bracket, ● bolt, ● Nut, ● Water-proof rubber, ● Wire holder
※ The sensing distance may vary depending on the size, surface condition, glossy, non-glossy of the sensing object
※ The sensing distance of PTX-M7A (-T), PTX-M7B (-T) is the distance when using the reflector HY-M5

Suffix code
Model Code Content
PTX - □ □ □ □ Photo Sensor
T 15 Through - beam 15 m
Sensing mode and
M 7 Retro - reflective 7m
distance
R 1 Diffuse - reflective 1m
A 24-240 V a.c. 50/60 Hz or 24-240 V d.c. ±10 % Built-in Power Supply
Power voltage
B 12-24 V d.c. ±10 % Built-in Amplifier
Normal type
Timer
-T Timer Built-in type

93
 PHOTO SENSORS

PLD series
Specifications
Model PLD-R2N PLD-R2P

Appearance

Sensing Type Diffuse - reflective

Sensing distance 2m

Detecting object White non-glossy paper (200x200 ㎜)

Power voltage 12-24 V d.c. ±10%

Power consumption Max. 30 ㎃ d.c.

● NPN open collector Max. 150 mA d.c. (resistance load) ● PNP open collector Max. 150 mA d.c. (resistance load)
Control output
● Residual voltage: 1 V d.c. Below ● Residual voltage: 1 V d.c. Below

Operation mode Light On mode

Response time Max. 1 ms

Hysteresis Within 20 % of detectable distance

Light source (wavelength) Infrared LED (850 nm)

LED Indicator ● Control output : Red LED ● Safety : green LED

Sensitivity adjustment 'Built-in' sensitivity adjustment V/R (220。degree spin V/R)

Protection circuit Reverse polarity protection, overcurrent protection

Ambient intensity of illumination ● Sunlight: max. 11000 Lux, ● Incandescent lamp: max. 3000 Lux

Ambient temperature & humidity ● When operating: -20 ~ 60 ℃ , ● when maintaining: -25 ~ 70 ℃, max. 35 ~ 85 % RH (without freezing)

Degree of protection IP64 (IEC 60529)

Insulating resistance 20 ㏁ or more (based on 500Vd.c. mega)

Dielectric strength 1000 V a.c. for 1 min

Vibration resistance 10-55 ㎐ double amplitude 1.5mm, X,Y,Z each direction for 2 hours

Shock resistance 500 ㎨ X・Y・Z each direction for 2 times

Connection method ●Cable pull-out typed ● Number of wires: 3P ● Outer diameter: Ø3 ㎜ ● Length: 2 m

Material ● Case: PET ● Lens cap: PC ● Lens : PMMA

Cable 3P (26 AWG), length : 2 m

Accessories ● Sensitivity adjusting driver, ● Fixing volt (3-M3 X 17L)

Weight (g) 60

Suffix code
Model Code Content
PLD - □ □ □ Small size photo sensors

Sensing mode R Diffuse - reflective

Sensing distance 2 2m

N NPN open collector output

Output
P PNP open collector output

94
 Photo Sensors

PL-D2B
Specifications New product
Universal
Model PL-D2B

Thin

Voltage
Appearance output type

Columnar

Sensing method Distance - settable Horseshoe

Sensing distance 0.2 ~ 2 m

Built-in
Detecting object White non-glossy paper (200x200 ㎜) power
Built-in
Power voltage 12-24 V d.c. ±10 % amplifier

Current consumption Max. 30 ㎃ Distance

setting type
● NPN / PNP open collector asynchronously, ● Load current : max. 150 ㎃ d.c. (resistive load)
Control output
● NPN residual voltage: max. 1 V d.c., ● PNP residual voltage: max. 2 V d.c. Long
distance
Operation mode Light ON / Dark ON ※ Selectable by the mode V/R Detection
type
Response time Max. 2 ㎳.

Hysteresis Less than 10% of the sensing distance Optical fiber

Light source (wavelength) Infrared LED (880 nm)

Area
Receiving part 2 Photo diodes

LED Indicator ● Control out display : Red LED ● Stability display: Green LED
Sensor
Distance setting Near/Far : Optical distance adjusting volume 5 cycles. Controller

Protection circuit Reverse polarity protection and output short-circuit protection

Ambient illumination ● Sunlight: max. 11000 lx, ● Incandescent lamp: max. 3000 lx.

Ambient temperature & humidity ● Operation: -20 ~ 60 ℃ ● Storage: -25 ~ 70 ℃, 35 ~ 85 % RH (without condensation)

Degree of protection IP65 (IEC 60529)

Insulation resistance Min. 20 ㏁. (500 V d.c. Mega)

Dielectric strength 1,000 V a.c. (50/60 Hz for 1 min)

Vibration resistance 10 - 55 Hz, double amplitude:1.5mm for 2 hours each in X. Y and Z directions.

Shock resistance 500 ㎨ 3 times each in X. Y and Z directions.

Connection method ● Cable output type, ● Number of wires: 4P, ● Thickness: Ø 4mm ● Length 2m

Material ● Case : PC, ● Lens : PC

Accessory Bracket, Adjustable driver, bolt, Nut.

Suffix code
Model Code Content
PL - □ □ □ Distance-Settable Photo Sensor

Sensing mode D Distance-settable

Sensing distance 2 2m

Power voltage B 12-24 V d.c.

95
 PHOTO SENSORS

PEN series
Specifications
Built-in power
Model
PEN-T10A PEN-M5A PEN-R700A

Appearance

Sensing Type Through - beam Retro - reflective Diffuse - reflective

Sensing distance 10 m 0.1 ~ 5 m 700 ㎜

Detecting object Opaque object (over Ø20 ㎜) Opaque object (over Ø60 ㎜) White non-glossy paper (200x200 ㎜)

Power voltage 24-240 V a.c. 50/60Hz or 24-240 V d.c. ±10 %

Current Emitter Max. 1 W

Max. 2 W
Consumption Transmitter Max. 2 W

Operation mode Light-incident operation (Light ON) / Light-shielding operation (Dark ON) ※ Selection by mode volume

Sensitivity adjustment - Built-in sensitivity adjustment volume

● Relay output (Contact composition 1a,1b),
Control Output
● Capacity : 30 V d.c. 5 A / 250 V a.c. 5 A resistance load life expectancy - min. 100 thousand times
Response time Less than 20 ms

Hysteresis - Within 20 % of detecting distance

Light source (wavelength) Infrared LED (850 nm)

● Control out display : Red LED
Indicator light
● Stability display : Green LED (However, the red LED of the transmissive emitter is a power indicator.)
Ambient light ● Sunlight : less than 11000 lx, ● Incandescent lamp : less than 3000 lx

Ambient temperature ● Operation : -20 ~ 60 ℃ ● Storage : -25 ~ 70 ℃, 35 ~ 85 % RH (without condensation)

Degree of protection IP 64 (IEC)

Insulation resistance Min. 20 ㏁. (500 V d.c. Mega)

Dielectric strength 1,500 V a.c. (50/60 ㎐ for 1 min)

Vibration resistance 10 - 55 ㎐ double amplitude:1.5mm for 2 hours each in X. Y and Z directions.

Shock resistance 500 ㎨ 500㎨ (about 50G), 3 times each in X, Y, Z directions

Connection method ● Cable output type, ● Number of wires : 5P, ● Thickness : Ø 6mm ● Length 2m (However, the emitter is 2P)

Material ● Case : heat-resistant ABS ● Lens : P.C

Weight (g) 150

Suffix code
Model Code Content
PEN - □ □ □ Photo Sensor

T 10 Through - beam 10 m
Sensing mode
M 5 Retro - reflective 0.1 - 5 m
and distance
R 700 Diffuse - reflective 700 ㎜

Power voltage A 24-240 V a.c. 50/60 Hz or 24-240 V d.c. ±10 %

96
 Photo Sensors

PG series
Specifications New product
Universal
NPN PG-TRN PG-TARN
Model
PNP PG-TRP PG-TARP
Thin

Voltage
output type

Appearance
Columnar

Horseshoe

Selection by switch (Normal/ON-Delay/OFF-Delay) Selection by switch (Normal/ON-Delay/Off-Delay/One-Shot)

Function Built-in
40 ms fixed 1 ㎳-5,000 ㎳ variable power
Built-in
Sensing method Through-beam type, diffuse-reflective type (decision by combined with fiber unit) amplifier

Sensing distance Decision by combined with fiber unit Distance

setting type
Power voltage 12-24 V d.c. ±10 %
Long
Current consumption Max. 35 ㎃ distance
Detection
Control ● NPN/PNP Voltage output ● Load voltage: max. 200 ㎃ (30 V d.c.) ● Residual voltage : max. 1 V d.c. type

Output ● NPN/PNP Voltage output

Optical fiber
Stability - ● Load current : 50 ㎃ (30 V d.c.) or less,
● Residual voltage : max. 1 V d.c.

Operation mode Light ON / Dark ON switch selection operating Normal or ON/OFF delay Switch selection operating Area

Response time Max. 1 ㎳

Sensor
Hysteresis Max. 10 % of sensing distance (Reflection) Controller

Light source (wavelength) Red LED (630 ㎚)

LED Indicator ● Control out display : Red LED ● Stability display : Green LED

Sensitivity adjustment Sensitivity adjustment by brewing well volume (Coarse) and fine adjustment volume (Fine)

Protection circuit Reverse polarity protection, overcurrent protection (except for stable output of multi-function type)

Ambient illumination ● Sunlight : max. 11000 lx, ● Incandescent lamp : max. 3000 lx

Ambient temperature & humidity ● Operating : -20 ~ 60 ℃, ● Preserving : -25 ~ 70 ℃, 35 ~ 85 % RH (without condensation)

Degree of protection IP40 (IEC 60529)

Insulating resistance Min. 20 ㏁ (500 V d.c. Mega standard)

Dielectric strength 1,000 V a.c. (50/60 Hz for 1 min)

Vibration resistance 10 - 55 ㎐ double amplitude 1.5mm, X,Y,Z each direction for 2 hours

Shock resistance 500㎨ X, Y, Z directions 3 times

Connection method Cable pull-out type (3 P, 2 m) Cable pull-out type (4 P, 2 m)

Weight (g) 120

Suffix code
Model Code Content
PG - □ □ Fiber Optic Sensor

Sensing mode TR Universal type

and distance TAR Multifunctional (Built-in timer function and stable output)

N NPN open collector output

Output
P PNP open collector output

97
 PHOTO SENSORS

PFD series
Specifications
NPN PFD-RGN PFD-RMN
Model
PNP PFD-RGP PFD-RMP

Appearance

Mark detection General type (mark detection) Multi type (mark detection, rotation speed, counter)
Function Counter - 400 cps, Up/Down, 0 - 9999
Tachometer - 12 ~ 9999 rpm
Power supply voltage 12-24 V d.c. ±10 %
Current consumption Max. 50 ㎃
Control
Output ● NPN/PNP Open collector output, ● Load current: 100 ㎃ (30 V d.c.) or less ● Residual voltage: 1V d.c. or less
Stability
External input Teaching Teaching / Reset input
Operating mode Selecting Light On / Dark On (selection by parameter)
Timer function ON-Delay, OFF-Delay, One-shot time output (Setting time: 1 ~ 9999 ㎳)
On/Off Delay 0 ~ 9999 ㎳
Light source (wavelength) Red LED (660 ㎚)
Protection circuit Power reverse connection and output short protection circuit
Response time 0.7 ms or less 1 ms or less
LED indicator 4 Digits FND
Sensitivity control Auto teaching/manual setting by setting button
● Brightness control 180˚ Turning indication, ● Display time set,
Additional function
● Zero Reset, ● Initial reset, Lock function
Ambient light ● Sunlight : max. 11000 lx, ● Incandescent lamp : max. 3000 lx
Ambient temperature & humidity ● Operating : -20 ~ 60 ℃, ● Preserving : -25 ~ 70 ℃, 35 ~ 85 % RH (without condensation)
Vibration resistance 10 - 55 ㎐ double amplitude 1.5mm, X,Y,Z each direction for 2 hours
Shock resistance 500㎨ X, Y, Z directions 3 times
Dielectric strength 1,000 V a.c. (50/60 Hz for 1 min)
Insulating resistance Min. 20 ㏁ (500 V d.c. Mega standard)
Connection method ● Cable output type, ● Number of wires: 5P, ● Thickness : Ø 4mm, ● Length 2m, ● DIN rail mounting structure
Weight (g) 150

● MODEL : PFD-RMN only

● UP / DOWN Mode, ● Prescale 1 ~ 999 distribution/dispensing setting, ● Indicating range: 0 ~ 9999,
Counter ● Counting speed : 400 cps (50 % duty), ● Output mode: 8 kinds selectable (N, F, C, R, K, P, Q, A),
Multi function ● External reset: Min. Signal width 5 ㎳

● Indicating range: 0 ~ 9999 rpm, ● Speed monitoring output function,

Tachometer
● Prescale: 1~1000 integers setting, ● Measurement cycle setting

Suffix code
Model Code Content
PFD - □ □ □ Digital optical fiber sensor
Light source R Red LED
G General purpose (MARK)
Function
M Multi type (MARK / RPM / Counter)
N NPN open collector
External output
P PNP open collector

98
 Photo Sensors

PFB series
Specifications New product
Universal
NPN PFB-RN
Model
PNP PFB-RP Thin

Voltage
output type

Appearance
Columnar

Horseshoe

Detection method Transmissive type, reflective type (by fiber cable)

Built-in
Detection distance By fiber cable power
Built-in
Power voltage 12-24 V d.c. ±10 % (Ripple 10 %이하) amplifier

Current consumption Max. 20 ㎃

Distance
setting type
Control output ● NPN/PNP Open collector output, ● Load current: 100 ㎃ (30 V d.c.) or less ● Residual voltage: 1 V d.c. or less
Output operation Selection by light-incident (Light On) and light-shielding (Dark On) switches Long
distance
Timer function NORMAL, ON-Delay, OFF-Delay (Delay time 40 ㎳ fixed) Detection
type
Response time 1 ms or less
Hysteresis Reflective type: 10% or less of the sensing distance Optical fiber

Light source (wavelength) Red LED (660 ㎚)

Indicator light Indication by Bar LED Area

Sensitivity control Auto teaching / manual setting by setting button

Protection circuit Mutual interference prevention, power reverse connection and output short protection circuit Sensor
Controller
Ambient light ● Sunlight : max. 11000 lx, ● Incandescent lamp : max. 3000 lx
Ambient temperature -10 ~ 55 ℃ (Storage ambient temperature: -25 ~ 70 ℃)
Ambient Humidity 35 ~ 85% R.H. (No condensation or freezing)
Degree of protection IP 40 (IEC)
Insulation resistance More than 20 ㏁ (at 500 V d.c. between code and case, adjusting switch and case)
Dielectric strength 1000 V a.c., 50/60 ㎐ for 1 min
Vibration resistance 10 - 55 ㎐ double amplitude width 1.5 ㎜ , X・Y・Z, each direction for 2 hours
Insulation resistance 500 ㎨ X, Y, Z each direction 3 times
Connection method ● Cable output type, ● Number of wires: 5 P, ● Thickness : Ø 4 mm, ● Length 2 m, ● DIN rail mounting structure
Material Case: Heatproof ABS
Weight (g) Approx. 150 g (fixing bracket and packaging)

Suffix code
Model Code Content
PFB - □ □ 10 bit A / D Built-in bar display type

Light source R Red LED

N NPN open collector

External output
P PNP open collector

99
 PHOTO SENSORS

PAS series
Specifications
PAS-T4NL PAS-T8NL PAS-T12NL PAS-T16NL PAS-T20NL
NPN
PAS-T4ND PAS-T8ND PAS-T12ND PAS-T16ND PAS-T20ND
Model
PAS-T4PL PAS-T8PL PAS-T12PL PAS-T16PL PAS-T20PL
PNP
PAS-T4PD PAS-T8PD PAS-T12PD PAS-T16PD PAS-T20PD

Appearance

Number of optical axis 4 8 12 16 20

Sensing range 60 ㎜ 140 ㎜ 220 ㎜ 300 ㎜ 380 ㎜
Detection distance 5m
Detection object Opaque material of Ø 30 mm or more
Optical axis pitch 20 ㎜
Light source IR (860 nm)
Power voltage 12-24 V d.c. ±10% ripple (p-p) 10% or less
Current Consumption Max. 80 ㎃ Max. 90 ㎃ Max. 100 ㎃ Max. 110 ㎃ Max. 120 ㎃
NPN / PNP open collector output-Load current : max. 100 ㎃,
Control output
● Load current : 100 ㎃ (30 V d.c.) or less ● Residual voltage : 1 V d.c. Below
Operating mode Light ON or Dark ON
● Emitter : Power indicator (green LED), M/S indicator (red LED)
LED Indicator
● Receiver : Incoming light stability indicator (green LED), output indicator (red LED), E1 indicator (red LED), E2 indicator (blue LED)
Protection circuit ● Power reverse connection protection, ● Output short circuit overcurrent protection, ● Mutual interference prevention function
Response time 7 ms or less
Insulation Resistance 20 MΩ or more (based on 500 VDC mega)
Noise resistance Square wave noise by noise simulator (pulse width 1㎲) ± 240 V
Dielectric strength 1,000 V a.c. ( 50/60 ㎐ for 1 min )
Vibration resistance 10 - 55 ㎐ double amplitude width 1.5 ㎜ , X・Y・Z, each direction for 2 hours
Shock resistance 500 ㎨, X・Y・Z each direction 3 times
Ambient light ● Sunlight : max. 11000 lx, ● Incandescent lamp : max. 3000 lx
Ambient temperature ● Operating : -10 ~ +55 ℃, ● Preserving : -25 ~ +70 ℃ ( However, no freezing or condensation )
Ambient humidity 35 ~ 85 % RH ( However, no condensation )
Degree of protection IP40 ( IEC standard )
Acquisition standard
Connection method When taking out the cable ( Number of wires : 5 P, Length : 3 m, Outer diameter : Ø 4 mm )
Case ABS
Material Display Acryl
Lens Acryl
Weight (g) 160 180 200 220 240

Suffix code
Model Code Content
PAS - □ □ □ □ □ Area Sensor slim type
Optical axis spacing 20 20 mm
Sensing mode T Through - beam
4 4 optical axis
8 8 optical axis
Number of optical axis 12 12 optical axis
16 16 optical axis
20 20 optical axis
N NPN open collector
Control output
P PNP open collector
L Light ON
Operation mode
D Dark ON

100
 Photo Sensors

PAN series
Specifications New product
Universal
NPN PAN20-T□N PAN40-T□N
Model
PNP PAN20-T□P PAN40-T□P
Thin

Voltage
output type
Appearance

Columnar

Sensing type Through - beam Horseshoe

Sensing distance 7m
Built-in
Detecting object Opaque object (over Ø32 ㎜) Opaque object (over Ø52 ㎜) power
Built-in
Optical axis pitch 20 ㎜ 40 ㎜ amplifier
Power voltage 12-24 V d.c. ±10% ripple (p-p) 10% or less
Distance
Current Consumption Max. 170 ㎃ Max. 100 ㎃ setting type
NPN or PNP open collector output,
Control output Long
● Load current : 100 ㎃ (26.4 VDC standard) or less ● Residual voltage : 1 V d.c. Below distance
Detection
● Emitter : M/S mode switch switching type ( Master / Slave )
Operation mode type
● Receiver : D/L mode switch switching type ( Dark ON, Light ON )
● Emitter : Power indicator (green LED), M/S indicator (red LED) Optical fiber
Operation indicator ● Receiver : Incoming light stability indicator (green LED), output indicator (red LED), E1 indicator (red LED),
E2 indicator (blue LED)
Area
● Power reverse connection protection, ● Output short circuit overcurrent protection,
Protection circuit
● Mutual interference prevention function
Response time Max. 15 ms Sensor
Controller
Insulation Resistance 20 MΩ or more (based on 500 VDC mega)
Noise resistance Square wave noise by noise simulator (pulse width 1㎲) ± 240 V
Dielectric strength 1,000 V a.c. ( 50/60 ㎐ for 1 min )
Vibration resistance 10 - 55 ㎐ double amplitude width 1.5 ㎜ , X・Y・Z, each direction for 2 hours
Shock resistance 500 ㎨, X・Y・Z each direction 3 times
Ambient light ● Sunlight : max. 11000 lx, ● Incandescent lamp : max. 3000 lx( receiving surface illuminance )
Ambient temperature ● Operating : -10 ~ +55 ℃, ● Preserving : -25 ~ +70 ℃ ( However, no freezing or condensation )
Ambient humidity 35 ~ 85 % RH ( However, no condensation )
Degree of protection IP65 ( IEC standard )

Acquisition standard

Connection method When taking out the cable ( Number of wires : 4 P, Length : 200 mm, Outer diameter : Ø 5.5 mm )
Case Aluminum
Material Front cover Acryl
Lens Acryl

Suffix code
Model Code Content

PAN □ -□ □ □ Area Sensor

20 20 ㎜ spacing
Optical axis pitch
40 40 ㎜ spacing

Sensing method T Through - beam

Number of optical axis

Number of optical axis
(please refer to the dimension)

N NPN open collector

Output
P PNP open collector

Suffix code
PAN 20 8, 12, 16, 20, 24, 28, 32, 36, 40, 44, 48

PAN 40 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24

101
 AREA SENSORS

HPAN series
Specifications
Model HPAN-C7 HPAN-CT7 HPAN-C7W

Appearance

WXHXD(㎜) 38.5×82.1×80.8
Function Universal High function Two sensors connectable
How to attach DIN Rail
Power Voltage 110 - 220 V a.c., 50/60 ㎐, ±10 %
Power consumption Approx. 5 VA
Power supply to sensor 12 V d.c. (±10 %), Load current: 200 ㎃ or less
● [L] Level 0-2 V d.c., Internal pull-up/pull-down resistance connection by NPN/PNP switch setting (4.7 ㏀),
Input
● [H] Level 4-30 V d.c., ● NORM/INV input signal inversion function
● NO contact : 250 V a.c. 3 A resistance load ● NC contact : 250 V a.c. 2 A resistance load
Contact point
● Relay rated load life : 100,000 times
Output
● NPN open collector output, load current : 100 ㎃ (30 V d.c.) or less
Contactless -
● Residual voltage : 1VDC or less, ISOLATION (insulation from internal circuit)
Response time ● Relay contact : approx. 10 ms, ● NPN open collector : max. 5 ㎲
IN, ES period synchronization output IN, ES period synchronization and
External synchronization -
function differential synchronization output function
● 3 types of timer setting modes
(ON DELAY, OFF DELAY,ONE SHOT DELAY)
Timer function - ● Timer time can be set -
(selected by dip switch)
40 ㎳~1 sec ↔ 0.4 s~10 sec
Ambient temperature &
● Operating : -20 ~ 60 ℃, ● Preserving : -25 ~ 70 ℃, 35 ~ 85 % RH (without condensation)
humidity
Noise immunity Power line : 2000 VP, 0.5 ㎲ pulse width (by noise simulation)
Dielectric strength 1,500 V a.c. 1 minute at 60 Hz
Insulation resistance 20 ㏁ (based on 500Vd.c. mega)
Vibration resistance 10-55 ㎐ (cycle 1 minute), double amplitude: 1.5 ㎜, 2 hours in each of X, Y, and Z directions (however, power is not turned on)
Shock resistance 100㎨ X, Y, Z directions twice each (however, the power is not turned on)
Weight (g) 160

HPA-12
Specifications
Model HPA-12

Appearance

WXHXD(㎜) 49.0×61.0×90.0
Function Multi-purpose
How to attach Relay Socket 8PIN
Power Voltage 220 V a.c. ±10 % 60 ㎐
Power consumption Approx. 4 VA
External output power 12 V d.c. ±10%, Load current: 50 ㎃ or less
Connectable sensor (Input) NPN, PNP Transistor output sensor
Output Relay contact : 1 c (250 V a.c. 3 A, resistive load, rated load life: 100,000 times)
Response time Approx. 10 ㎳
Ambient temperature & humidity ● Operating : -20 ~ 60 ℃, ● Preserving : -25 ~ 70 ℃, 35 ~ 85 % RH (without condensation)
Noise immunity ● Power line: 1,500 Vp ● Pulse width: 0.5 μs (noise simulator)
Dielectric strength 1500 V a.c. for 1 min (between supply and output)
Insulation resistance 20 ㏁ (based on 500Vd.c. mega)
Vibration resistance 10 - 55 ㎐ (for a minute), double amplitude width 1.5 ㎜, each X・Y・Z direction for 2 hour (in power off)
Shock resistance 100 ㎨ (Approx. 10 G), each X・Y・Z, 2 direction (in power off)
Weight (g) 260

102
 Rotary Encoders

HE30B,HE40B,HE50B series
Specifications Axial

Model HE30B HE40B HE50B

Hollow shaft
type
Appearance
Clogged
hollow
Axial
Output phase difference Phase difference between the phase A and B : T/4 ± T/8 (1 cycle of A phase=T)
Response speed Max. 200 k㎐
Wheel type
NPN voltage output ※ Depending on the model name composition
Rated Open collector 5-12 V d.c. ±5 %
voltage Totem pole output 12-24 V d.c. ±5 %
Line driver output 5 V d.c. ±5 % 5 V d.c. / 12 V d.c. / 24 V d.c. ±5 %
Electrical specifications

Current consumption Max. 60 ㎃ (no load)

Connection method Cable extended type
NPN voltage output
● Load current : max. 30 ㎃ ● Load current : 30 ㎃ or less, ● Residual voltage : 0.4 V or less
NPN open collector
Control LOW (load current : max. 30 ㎃, residual voltage : max. 0.4 V d.c.)
Totem pole output
output HIGH (load current : max. 10 ㎃, output voltage : above rated voltage -2.5 V)

LOW (load current : max. 20 ㎃, residual voltage: max. 0.4 V)

Line driver output
HIGH (load current : max. 20 ㎃, residual voltage: min. 2.5 V)
Voltage output
Max. 1 μs (wire length : 1.5 m, sinking current= max. 30 ㎃)
Response Open collector
time Totem pole output Max. 1 ㎲ (wire length : 1.5 m, sinking current= max. 10 ㎃)
Line driver output Max. 1 μs (wire length : 1.5 m, sinking current= max. 30 ㎃)
Starting torque 2×10-3 N・m 4×10-3 N・m 7×10-3 N・m
specifications
Mechanical

Moment of inertia Max 2 × 10-6 ㎏・㎡ Max 4 × 10-6 ㎏・㎡ Max 8 × 10-6 ㎏・㎡
● Radial : within 15 N ● Radial : within 30 N ● Radial : within 50 N
Permissible shaft loading
● Thrust : within 10 N ● Thrust : within 20 N ● Thrust : within 30 N
Max. number of revolutions 5,000 r/min
Insulation resistance Min. 100 MΩ (between the terminal and case 500 V d.c. mega standard)
Dielectric strength 800 V a.c. 60 ㎐ for 1 min (between the terminal and case)
Vibration resistance 10 - 55 ㎐ (cycle for 1 min), double amplitude : 1.5 ㎜, for 2 hours each in X, Y and Z directions
specifications

Shock resistance Max. 490 ㎨ Max. 735 ㎨

Ambient

Ambient temperature & humidity -10 ~ 70 ℃, 35 ~ 85 % RH (without condensation), during storage: -25 ~ 85 ℃
● 5P, Ø5.0 ㎜, length : 1.5 m, shield cable (HE40B, HE50B specifications : 2m, 8m,10 m)
Cable
● Line driver type : 8P, Ø5.0 mm, length : 1.5 m, shield cable
Accessories Ø 4.0 ㎜ coupling Ø 6.0 ㎜ / Ø 8.0 ㎜ coupling Ø 8.0 ㎜ coupling, bracket
Weight (g) 120 170 200

Suffix code Number of pulses (resolution)

Model Code Content Model Number of pulses per revolution
HE □- □ □ □ □ □ Shaft Rotary Encoder (incremental)
30B 4 Outer diameter : Ø 30 ㎜ axis : Ø 4 ㎜
6 Outer diameter : Ø 40 ㎜ axis : Ø 6 ㎜
Dimension 40B
8 Outer diameter : Ø 40 ㎜ axis : Ø 8 ㎜ Option : (Option)
50B 8 Outer diameter : Ø 50 ㎜ axis : Ø 8 ㎜
HE30B 100, 200, 360, 500, 1000, 1024
Number of pulses * Refer to "Number of pulses (resolution)"
2 A, B phase output
3 A, B, Z phase output
Output signal 3C A, B, Z phase output
4 A, A, B, B phase output
6 A, A, B, B, Z, Z phase output
12 NPN voltage output (5 - 12 V d.c.)
N
24 NPN voltage output (12-24 V d.c.)
12 NPN open collector output (5 - 12 V d.c.) *1, *2, *5, 10, *12, 15, 20, 25, 30, 40, 45, 50,
O
24 NPN open collector output (12-24 V d.c.) HE40B / 60, 75, 100, 120, 125, 150, 192, 200, 240,
Output circuit 12 Totem pole output (5 - 12 V d.c.) HE50B 250, 256, 300, 360, 400, 500, 512, 600,
T
24 Totem pole output (12-24 V d.c.) 800, 1000, 1024
5 Line driver Output (5 V d.c.)
L 12 Line driver Output (12 V d.c.)
※ for HE40B, HE50B,
24 Line driver Output (24 V d.c.)
(Note) 「*」 Is output only for A, B phase (line driver output: A, A, B, B phase). ※ Please contact us if you have any request for pulse
Pulses other than the ones in the chart are order-made production

103
 ROTARY ENCODERS

HE40H series
Specifications
Model HE40H

Appearance

Output phase difference Phase difference between the phase A and B : T/4 ± T/8 (1 cycle of A phase=T)
Response speed 200 K㎐ max.
NPN voltage output ※ Depending on the model name composition
Rated Open collector 5-12 V d.c. ±5 %
voltage Totem pole output 12-24 V d.c. ±5 %
Line driver output 5 V d.c. ±5 %
Current consumption Max. 60 ㎃ (no load), line driver output max. 50 ㎃ (no load)
Electrical specifications

Connectionmethod Cable extended type

NPN voltage output
● Load voltage : max. 30 V, ● Load current : max. 30 ㎃, ● Residual voltage : max. 0.4 V
NPN open collector
Control LOW (load current: max. 30 ㎃, residual voltage: max. 0.4 V)
Totem pole output
output HIGH (load current : max. 10 ㎃, output voltage: above rated voltage - 2.5 V)
LOW (load current: max. 20 ㎃, max. 0.4 V)
Line driver output
HIGH (load current : max. 20 ㎃, residual voltage: min. 2.5V)
Voltage output
Max. 1 μs (wire length: 1.5 m, sinking current= 30 ㎃)
Response Open collector
time Totem pole output Max. 1 μs (wire length: 1.5 m, sinking current= max. 10 ㎃.)
Line driver output Max. 1 μs (wire length: 1.5 m, sinking current= max. 30 ㎃)
Starting torque 4×10-3 N.m
specifications
Mechanical

Moment of inertia 4×10-6 g・㎠ max

Permissible shaft loading ● Radial : within 30 N ● Thrust : within 20 N
Max. number of revolutions 5,000 r/min
Insulation resistance Min. 100 MΩ (between the terminal and case 500 V d.c. mega standard)
Dielectric strength 800 V a.c. 60 ㎐ for 1 min (between the terminal and case)
specifications

Vibration resistance 10 - 55 ㎐ (cycle for 1 min), double amplitude : 1.5 ㎜, for 2 hours each in X, Y and Z directions
Ambient

Shock resistance 490 ㎨ max

Ambient temperature & humidity -10 ~ 70 ℃ (without icing), during storage: -25 ~ 85 ℃, 35 ~ 85 % RH
● 5 P, Ø5.0 ㎜, length : 1.5 m, shield cable (HE40H cable length option : 2 m, 8 m, 10 m)
Cable
● Line drive type : 8P, Ø5.0 ㎜, length : 1.5 m, shield cable
Weight (g) 170

Suffix code Number of pulses (resolution)

Model Code Content Model Number of pulses per revolution
HE □- □ □ □ □ □ Hollow Shaft Rotary Encoder (incremental)
6 Outer diameter : Ø 40 ㎜ axis inner diameter : Ø 6 ㎜
8 Outer diameter : Ø 40 ㎜ axis inner diameter : Ø 8 ㎜
Dimension 40H
10 Outer diameter : Ø 40 ㎜ axis inner diameter : Ø 10 ㎜
12 Outer diameter : Ø 40 ㎜ axis inner diameter : Ø 12 ㎜
Number of pulse * Refer to the pulse code chart (resolving power)
2 A, B phase output
3 A, B, Z phase output *1, *2, *5, 10, *12, 15, 20, 25, 30, 40,
Output signal
3C A, B, Z phase output 45, 50, 60, 75, 100, 120, 125, 150,
(output phase) HE40H
4 A, A, B, B phase output 192, 200, 240, 250, 256, 300, 360,
6 A, A, B, B, Z, Z phase output 400, 500, 512, 600, 800, 1000, 1024,
12 NPN voltage output (5 - 12 V d.c.)
N
24 NPN voltage output (12-24 V d.c.)
12 NPN open collector output (5 - 12 V d.c.)
O
Output circuit 24 NPN open collector output (12-24 V d.c.)
12 Totem pole output (5 - 12 V d.c.)
T
24 Totem pole output (12-24 V d.c.)
L Line driver output (5 V d.c.)
(Note) 「*」 Is output only for A, B phase (line driver output: A, A, B, B phase). ※ Please contact us if you have any request for pulse
Pulses other than the ones in the chart are order-made production

104
 Rotary Encoders

HE40HB series
Specifications Axial

Model HE40HB
Hollow shaft
type
Appearance
Clogged
hollow
Axial
Output phase difference Phase difference between the phase A and B : T/4 ± T/8 (1 cycle of A phase=T)
Response speed Max. 200 k㎐
Wheel type
NPN voltage output ※ By suffix code
Rated Open collector 5-12 V d.c. ±5 %
voltage Totem pole output 12-24 V d.c. ±5 %
Line driver output 5 / 12 / 24 V d.c. ±5 %
Electrical specifications

Current consumption Max. 60 ㎃, line driver output max. 30 ㎃ (no load)

Connection Cable extended type
NPN voltage output
● Load voltage : max. 30 V ● Load current: max. 30 ㎃ ● Residual voltage : max. 0.4 V
NPN open collector
Control ● LOW (load current: max. 30㎃ residual voltage: max. 0.4V)
Totem pole output
output ● HIGH (load current: max. 10㎃, output voltage: above rated voltage - 2.5 V d.c.)

● LOW (load current: max. 20 ㎃, residual voltage: max. 0.4 V d.c.)

Line driver output
● HIGH (load current: max. 20 ㎃, residual voltage: min. 2.5V d.c.)
Voltage output
Max. 1 μs (wire length: 1.5 m, sinking current= max. 30 ㎃)
Response Open collector
time Totem pole output Max. 1 ㎲ (wire length 1.5 m, sinking current= max. 10 ㎃.)
Line driver output Max. 1 μs (wire length: 1.5 m, sinking current= max. 30 ㎃)
4×10-3 N.m
specifications

Starting torque
Mechanical

Moment of inertia 4×10-6 Kg・m2 max

Permissible shaft loading ● Radial : within 30 N ● Thrust : within 20 N
Max. number of revolutions 5,000 r/min
Insulation resistance Min. 100 MΩ (between the terminal and case 500 V d.c. mega standard)
Dielectric strength 800 V a.c. 60 ㎐for 1 min (between the terminal and case)
Vibration resistance 10 - 55 ㎐ (cycle for 1 min), double amplitude : 1.5 ㎜, for 2 hours each in X, Y and Z directions
specification
Ambient

Shock resistance Max. 735 ㎨

Ambient temperature & humidity -10 ~ 70 ℃ (without condensation), during storage : -25 ~ 85 ℃, 35 ~ 85 % RH
● 5 P, Ø 5 ㎜, length : 1.5 m, shield cable
Cable
● Line driver type : 8P, Ø 5 ㎜, length : 1.5 m, shield cable
Accessories Bracket

Suffix code Number of pulses (resolution)

Model Code Content Model Number of pulses per revolution
HE □- □ □ □ □ □ Blind Shaft Type Rotary Encoder (Incremental)
6 Outer diameter : Ø40 ㎜ inner diameter : Ø6 ㎜
8 Outer diameter : Ø40 ㎜ inner diameter : Ø8 ㎜
Dimension 40HB
10 Outer diameter : Ø40 ㎜ inner diameter경 : Ø10 ㎜
12 Outer diameter : Ø40 ㎜ inner diameter : Ø12 ㎜
Number of pulses * Refer to "Number of pulses (resolution)"
2 A, B phase output
3 A, B, Z phase output
Output signal *1, *2, *5, 10, *12,15, 20, 25, 30,
3C A, B, Z phase output
(Output phase) 40, 45, 50, 60, 75, 100, 120, 125,
4 A, A, B, B phase output
HE40HB 150, 192, 200, 240, 250, 256,
6 A, A, B, B, Z, Z phase output
300,360, 400, 500, 512, 600, 800,
24 NPN voltage output (12-24 V d.c.) 1000,1024
N
12 NPN voltage output (5 - 12 V d.c.)
24 NPN open collector output (12-24 V d.c.)
O
12 NPN open collector output (5 - 12 V d.c.)
Output circuit 24 Totem pole output (12-24 V d.c.)
T
12 Totem pole output (5 - 12 V d.c.)
5 Line driver Output (5 V d.c.)
L 12 Line driver Output (12 V d.c.)
24 Line driver Output (24 V d.c.)
(Note) 「*」 Is output only for A, B phase (line driver output: A, A, B, B phase). ※ Please contact us if you have any request for pulse
Pulses other than the ones in the chart are order-made production

105
 ROTARY ENCODERS

PSC series
Specifications
Model PSC

Appearance

Output phase difference Phase difference between the phase A and B : T/4 ± T/8 (1 cycle of A phase=T)

Response speed Max. 100 K㎐

Electrical specifications

Rated voltage 5-12 V d.c. (±5 %), 12-24 V d.c. (±5 %)

Current consumption Max. 60 ㎃

Connection Cable extended type

Voltage and ● Load voltage: max. 30 V, ● load current: max. 30 ㎃, ● Residual voltage: max. 0.4 V
Control open collector outputs
output ● LOW (load current : max. 30 ㎃, residual voltage : max. 0.4 V)
Totem pole output
● HIGH (load current : max. 10 ㎃, output voltage : above rated voltage - 1.5 V d.c.)
Response time Max. 1 μs (wire length: 1.5 m, sinking current= = 30 ㎃)

Starting torque Max. 200 gf・㎝ (19.600 u N・m)

specifications

Max. 800 g・㎠ (8X10-6 kg・m²)

Mechanical

Moment of inertia

Permissible shaft loading ● Radial : within 0.1 ㎜, ● Thrust : within 0.2 ㎜

Max. number of revolutions 5,000 r/min

Bearing life 1.2 X 10/ (r/min) : time

Insulation resistance Min. 500 MΩ (between the terminal and case)

Dielectric strength 500 V a.c. 60 ㎐ for 1 min (between the terminal and case)
specification

Vibration resistance 10 - 55 ㎐ (cycle for 1 min), double amplitude : 1.5 ㎜, for 2 hours each in X, Y and Z directions
Ambient

Shock resistance Max. 75 G

Ambient temperature & humidity -10 ~ 70 ℃ (without icing), during storage: -25 ~ 85 ℃, 35 ~ 85 % RH

Cable ● Number of strips: 5 P, ● thickness: Ø 5.0 ㎜, ● Length: 1.5 m, ● Shield cable

Weight (g) 625

Suffix code
Model Code Content
PSC- □ □ □ □ Wheel Type Encoder

MA 1m

MB 1㎝

MC 1㎜
Min. length measurement
YA 1 YARD

YB 0.1 YARD

YC 0.01 YARD

Output signal AB A, B phase output (PSC-MA, YA), the others are A, B, Z Phase output

N NPN voltage output

Output circuit O NPN open collector

T Totem pole output

12 12 V d.c. (5-12 V d.c.)

Power voltage
24 24 V d.c. (12-24 V d.c.)

※ The codes PSC-MA and PSC-YA are A, B phase output. The others are A, B, Z phase output

106
 Thyristor Power Regulators

TPR-3
Specifications General type
3-phase

Model TPR-3P
New product
General single
phase

MINI
Slim type
Single-phase,
three-phase

Slim type
phase
Appearance

3 channels
Each phase
control

Slim type
3-phase

Power voltage 220 V a.c. / 380 V a.c. / 440 V a.c.

Power frequency 50/60 ㎐ (common)

Rated current 200 A / 250 A / 320 A / 500 A

Protective circuit ● Fuse break alarm, ● Over current alarm, ● Overheating heat sink

Applying load Resistive load / Inductive load

Current Input 4-20 ㎃ d.c.

Voltage Input 1-5 V d.c.

Control input
Contact Input ON/OFF

External VR External volume (10 ㏀)

Control type ● Phase control, ● ON/OFF control

Start type Soft start / down

Output voltage More than 95 % of the Power voltage (In case of maximum current input)

Cooling type Forced cooling (200 A ~ 500 A), separate power supply for fan driving (320 A, 500 A)

Display method Display by LED light

Insulation resistance Min. 100 MΩ (Base on 500 V d.c. mega)

Output adjustable range 0 ~ 100 %

Dielectric strength 2,000 V a.c. 50/60 Hz for 1 min

Line noise Noise by noise simulator (2 ㎸)

Ambient temperature & humidity 0 ~ 40 ℃, 35 ~ 85 % RH (without condensation)

Storage temperature -25 ~ 70 ℃

Weight (g) 200/250 A: about 15 kg, 320 A: about 22 kg, 500 A: about 35 kg

Suffix code
Model Code Content
TPR-3P □ □ 3-Phase Power Regulator
220 220 V a.c.
Power voltage
380/440 380 V a.c. / 440 V a.c.
200 200 A
250 250 A
Rated current
320 320 A
500 500 A

107
 THYRISTOR POWER REGULATORS

TPR-2G NEW
Specifications
Low voltage TPR-2G25L TPR-2G35L TPR-2G50L TPR-2G70L
Model
High voltage TPR-2G25H TPR-2G35H TPR-2G50H TPR-2G70H

Appearance

Power Low voltage 220 V a.c.

voltage High voltage 380 V a.c.

Power frequency 50 Hz / 60 Hz (common)

Rated current (40 ℃ standard) 25 A 35 A 50 A 70 A

Applying load Resisitive load

Current input 4-20 mA d.c. (impedance : 100Ω)

Control Voltage input － 1-5 V d.c.

Input Contact input ON / OFF －

External VR External volume (10 ㏀)

Control method ● Phase control (shipment mode), ● Fixed cycle cycle control (optional), ● Variable cycle cycle control (optional)

Movement type SOFT START / SOFT DOWN (Time 0 to 50 seconds)

Output voltage More than 98 % of the Power voltage (In case of maximum current input)

Cooling method Natural cooling Forced cooling

Display method Display by LED

Insulation resistance 500 V d.c. 100 MΩ

Dielectric strength 2,500 V a.c. 50/60 Hz for 1 min

Line noise Noise by noise simulator (Pulse width 1 us: ± 2kV)

Ambient temperature 0~50 ℃ (However, no condensation)

Ambient Humidity 30 ~ 85 % RH

Storage temperature -25 ~ 70 ℃

Weight(g) 740 1,730 1,750

Suffix code
Model Code Content

TPR-2G ˩ ˩ -˩ Single-phase power regulator

25 25 A

35 35 A
Rated current
50 50 A

70 70 A

L 220 V a.c. 50/60 Hz

Used load voltage
H 380 V a.c. 50/60 Hz

- Phase Control (Default MODE)

Control method F Fixed Cycle Control(Optional)

V Variable Cycle Control(Optional)

108
 Thyristor Power Regulators

TPR-2M
Specifications General type
3-phase
Economical type Advanced type
Low voltage Low voltage High voltage New product
Model General single
TPR-2ME25L TPR-2MS25L TPR-2MS25H phase

TPR-2ME35L TPR-2MS35L TPR-2MS35H MINI

Slim type
Single-phase,
three-phase

Slim type
phase
Appearance
3 channels
Each phase
control

Slim type
WXHXD (㎜) 47.5×90.0×112.0 3-phase

Load Voltage 100-240 V a.c. 100 - 440 V a.c.

Circuit input power 100-240 V a.c. 3 W 24 V d.c. 1 W
Power frequency 50/60 ㎐ (common)
Rated current 25 A / 35 A
4-20 ㎃ d.c. (impedance : 100 Ω)
Current input 4-20 ㎃ d.c. (impedance : 100 Ω) (Option)
(Basic packages)
Voltage input 1-5 V d.c. (Basic packages) 1-5 V d.c. (Option)
Control
Input Contact input ON/OFF (Basic packages) ON/OFF (Option)

External VR (10 ㏀) Simultaneous use of

External VR -
current and voltage input is not supported

Applicable device TRIAC SCR

Control method ● Phase control (Basic), ● Variable Cycle control (Option)

Movement type SOFT START (60 sec), SOFT UP/DOWN (15 sec) / Adjust start time by SOFT VR

Output voltage More than 98 % of the Power voltage ( In case of maximum current input ) / Output limitation control by Power VR
● Relay contact output (overcurrent (CE), ● heat sink overheat (OT),
Alarm function -
● power failure/heater break (PE), ● SCR short (PE)
Check Output Volume FIRE : Flicker speed directly proportional to output

Check power POWER: ON POWER -

Display
method - CE (CURRENT ERROR) : Load current greater than 45 A
(LED)
Alarm verification - OT (OVER TEMP) : Heat shield temperature above 85℃

PE (power ERROR): Power error, Heater break

Cooling method Natural cooling

Weight (g) 322

Suffix code
Model Code Content
TPR-2M □ □ □ □ Single-Phase Mini Power Controller

E Economical type
Type
S High function

25 25 A
Rated current
35 35 A

L 100-240 V a.c.
Power voltage
H 100 - 440 V a.c. (High function only)

C 4-20 ㎃ d.c.
Selection specification Economic type: Basic specification
V 1-5 V d.c.
(High function only) High function: Selection specification (optional 1)
O ON/OFF
※ The circuit input voltage shall be applied separately. (Low pressure : 100-240 V a.c. / High pressure: 24 V d.c.)

109
 THYRISTOR POWER REGULATORS

TPR-3M
Specifications
Model TPR-3M25L TPR-3M45L

Appearance

WXHXD (㎜) 110.0×157.5×150.0

Power Voltage 100-240 V a.c.

Circuit input power 24 V d.c. 8 W

Frequency of use 50/60 ㎐

rated current 25 A 45 A

Applied Load Resistance load

Control Input 4-20 ㎃ d.c. (impedance: 100 Ω)

Control method Phase control (select variable cycle, fixed cycle control options)

Output voltage More than 98 % of the Power voltage ( In case of maximum current input ) / Output limitation control by Power VR

Cooling method Forced cooling (24 V d.c. FAN)

Display method 4 LEDs display status and alarm conditions

Insulation resistance Above 100 ( (based on 500 Vd.c. mega)

Voltage withstand 2,500Va.c. 50/60 ㎐ For 1 min

Line noise Noise by noise simulator (2,000 V)

Storage temperature -30 ~ 90 ℃

Ambient temperature & humidity -20 ~ 80 ℃, 45 ~ 85% RH (No condensation)

Weight (g) 1,756

Suffix code
Model Code Content
TPR-3M □ □ □ 3-Phase mini power regulator

25 25 A
Rated current
45 45 A

Power Voltage L 100-240 V a.c. (For low voltage)

Option IS Power insulation type

※ Option -IS type is a product that can connect up to 5 in series with 1 temperature controller and power supply (SMPS).
The general type is 24 V d.c. The partial power circuit is non-insulated and requires 1:1 connection with the temperature controller.

110
 Thyristor Power Regulators

TPR-2SL
Specifications General type
3-phase
TPR-2SL TPR-2SL TPR-2SL TPR-2SL TPR-2SL TPR-2SL TPR-2SL TPR-2SL
Low voltage
040L 055L 070L 090L 110L 130L 160L 200L New product
Model General single
TPR-2SL TPR-2SL TPR-2SL TPR-2SL TPR-2SL TPR-2SL TPR-2SL TPR-2SL phase
High voltage
040H 055H 070H 090H 110H 130H 160H 200H
MINI
Slim type
Single-phase,
three-phase

Slim type
phase

Appearance
3 channels
Each phase
control

Slim type
3-phase

60.0×203.0 85.0×219.0
WXHXD (㎜) 60.0×183.0×172.1 85.0×245.5×205.1
×172.1 ×205.1
Power Low voltage 100-240 V a.c.
voltage High voltage 380-440 V a.c.
100-240 V a.c.
Circuit input power
6W 16 W 20 W
Power frequency 50/60 ㎐ (Common)
Rated current
40 A 55 A 70 A 90 A 110 A 130 A 160 A 200 A
(40 ℃ standard)
Fuse installation None (optional) Built-in fast acting fuse
Applying load Resisitive load
Current input 4-20 ㎃ d.c. (impedance : 100 Ω)
Control Voltage input 1-5 V d.c. (option : 0-10 V d.c.)
Input Contact input ON/OFF
External VR External volume (10 ㏀)
Control method ● Phase control, ● Fixed cycle control, ● Variable cycle control, ● ON/OFF control
Movement type SOFT START / SOFT UP, DOWN
Output voltage More than 98 % of the Power voltage (In case of maximum current input)
Forced
Cooling method Natural cooling Natural cooling Forced cooling
cooling
Display method Display by LED
Insulation resistance Min. 100 MΩ (based on 500 V d.c. mega)
Output control range 0 ~ 100 %
Dielectric strength 3000 V a.c. 50/60 ㎐ for 1 min
Line noise Noise by noise simulator (3000 V)
Ambient temperature &
0 ~ 40 ℃, 30 ~ 85 % RH (without condensation)
humidity
Storage temperature -25 ~ 70 ℃
Weight (g) 1,388 1,478 2,820 3,100

Suffix code
Model Code Content
TPR-2SL □ □ □ □ Slim Type Single-Phase Thyristor Power Regulator
040 40 A
055 55 A Fuse optional
070 70 A
090 90 A
110 110 A
130 130 A Fuse built-in
160 160 A
200 200 A
L 100-240 V a.c. (Low voltage)
Power voltage
H 380-440 V a.c. (High voltage)
C RS485
Option
F Built-in fuse type (for 25/40/55/70 A models)
※ The circuit need 100 - 240 V a.c. voltage power separately.

111
 THYRISTOR POWER REGULATORS

TPR-3SL-EP NEW
Specifications
Low voltage TPR-3SL040L-EP TPR-3SL055L-EP TPR-3SL070L-EP TPR-3SL090L-EP TPR-3SL130L-EP TPR-3SL160L-EP
Model
High voltage TPR-3SL040H-EP TPR-3SL055H-EP TPR-3SL070H-EP TPR-3SL090H-EP TPR-3SL130H-EP TPR-3SL160H-EP

Appearance

Low voltage 100-240 V a.c.

Power voltage
High voltage 100-440 V a.c.

Circuit input power 100-240 V a.c. 18 W

Power frequency 50/60 Hz (Common)

Rated current 40 A 55 A 70 A 90 A 130 A 160 A

Applying load Resisitive load

Current input 4-20 ㎃ d.c. (Impedance : 100 Ω)

Control type ● Phase control, ● Fixed cycle control, ● Variable cycle control, ● ON/OFF control

Movement type SOFT START / SOFT UP, DOWN

Output voltage More than 98 % of the Power voltage (In case of maximum current input)

Cooling method Forced cooling

Display method Display by LED

Insulation resistance Min. 100 ㏁ (500 V d.c. Mega standard)

Output control range 0 ~ 100 %

Dielectric strength 3,000 V a.c. 50/60 Hz for 1 min

Line noise Noise by noise simulator (2500 V)

Ambient temperature & humidity 0 ~ 40 ℃, 30 ~ 85 % RH (without condensation)

Storage temperature -25 ~ 70 ℃

Weight (g) 4,324 9,194 9,288

Suffix code
Model Code Content
TPR-3SL □ □ -□ 3-Channel Each Phase Control Thyristor Power Regulator

040 40 A

055 55 A

070 70 A
Rated current
090 90 A

130 130 A

160 160 A

L 100-240 V a.c. (Low voltage)

Power voltage
H 100-440 V a.c. (High voltage)

Option EP Each phase control (individual control of 3 devices )

※ Circuit and fan need 100 - 240 V a.c. voltage power separately.
※ For 130 A, 160 A products, the fan need 24 V d.c. voltage power.

112
 Thyristor Power Regulators

TPR-3CH-EC NEW
Specifications General type
3-phase

Low voltage TPR-3CH040L-EC TPR-3CH055L-EC TPR-3CH070L-EC TPR-3CH090L-EC TPR-3CH130L-EC TPR-3CH160L-EC

Model New product
High voltage TPR-3CH040H-EC TPR-3CH055H-EC TPR-3CH070H-EC TPR-3CH090H-EC TPR-3CH130H-EC TPR-3CH160H-EC
General single
phase

MINI
Slim type
Single-phase,
three-phase

Slim type
Appearance phase

3 channels
Each phase
control

Slim type
3-phase
Low voltage 100-240 V a.c.
Power voltage
High voltage 100-440 V a.c.

Input voltage 24 V d.c.

Current
Circuit power 208 mA 458 mA
consumption
Power
5W 11 W
Consumption
Frequency used 50/60 Hz (Common)

Rated current 40 A 55 A 70 A 90 A 130 A 160 A

Applied load Resistance load

Control method ● Phase control, ● Fixed cycle cycle control, ● Variable cycle cycle control

Starting method SOFT START / DOWN

Output voltage 98% or more of power supply voltage (at maximum current input)

Cooling method Forced cooling

How to display Output indication by LED

Insulation Resistance 100 MΩ or more (based on 500 V d.c. mega)

Output adjustment range 0 ~ 100 %

Withstand voltage 3,000 V a.c. 1 minute at 50/60 Hz

Line noise Noise by noise simulator (2,500 V)

Ambient temperature 0 ~ 40 ℃ (with no condensation)

Ambient Humidity 30 ~ 85 % RH

Storage temperature -25 ℃ ~ 70 ℃

Weight(g) 4,324 9,194 9,288

Suffix code
Model Code Content
TPR-3CH □ □ -□ 3-Channel Each Phase Control Thyristor Power Regulator

040 40 A

055 55 A

070 70 A
Rated current
090 90 A

130 130 A

160 160 A

L 100-240 V a.c. (Low voltage)

Power voltage
H 100-440 V a.c. (High voltage)

Option EC EtherCAT communication control

※ Circuit power and FAN power are separately 24 V d.c. Voltage must be applied.

113
 SOLID STATE RELAYS

TPR-3SL
Specifications
Low voltage TPR-3SL040L TPR-3SL055L TPR-3SL070L TPR-3SL090L TPR-3SL130L TPR-3SL160L
Model
High voltage TPR-3SL040H TPR-3SL055H TPR-3SL070H TPR-3SL090H TPR-3SL130H TPR-3SL160H

Appearance

WXHXD(㎜) 110.0×249.5×213.7 110.0×249.5×213.7 173.0×300.5×239.1

Low voltage 100-240 V a.c.

Power voltage
High voltage 380-440 V a.c.

Circuit input power 100-240 V a.c. 18 W 100-240 V a.c. 20 W

Power frequency 50/60 ㎐ (Common)

Rated current 40 A, 55 A, 70 A, 90 A, 130 A, 160 A

Applying load Resistive load

Current input 4-20㎃ d.c. (Impedance : 100 Ω)

Control Voltage input 1-5 V d.c.

Input Contact input ON / OFF

External VR External volume (10 KΩ)

Control method ● Phase control, ● Fixed cycle cycle control, ● Variable cycle cycle control, ● ON/OFF control

Movement type SOFT START / SOFT UP, DOWN

Output voltage More than 98 % of the Power voltage (In case of maximum current input)

Cooling method Natural cooling (40 A, 55 A), Forced cooling (70 A, 90 A, 130 A, 160 A)

Display method Display by LED

Insulation resistance Min. 100 MΩ (Base on 500 V d.c. mega)

Output control range 0 ~ 100 %

Dielectric strength 3,000 V a.c. 50/60 Hz for 1 min

Line noise Noise by noise simulator (2500 V)

Ambient temperature & humidity 0 ~ 40 ℃, 30 ~ 85 % RH (without condensation)

Storage temperature -25 ~ 70 ℃

Weight (g) 4,044 4,324 9,100 9,194

Suffix code
Model Code Content
TPR-3SL □ □ -□ Slim Type 3-Phase Power Regulator
040 40 A
055 55 A
070 70 A
Rated current
090 90 A
130 130 A
160 160 A
L 100-240 V a.c. (Low voltage)
Power voltage
H 380-440 V a.c. (High voltage)
- Fuse built-in
Option
N No fuse
※ Circuit and fan need 100 - 240 V a.c. voltage power separately.

114
 Solid State Relays

SSR-2C
Specifications
NEW
New product
Phase

Model SSR-2C252Z SSR-2C402Z

General type
phase

Multifunctional
3-phase
Radiator
Appearance integrated type

New product
3-phase

General type
Load voltage 90-264 V a.c. 3-phase

Peak voltage (non-repetitive) 600 V Slim type

phase
Radiator
Rated load current 25 A 40 A integrated type

Slim type
Frequency 50/60 Hz(Common) 2-line cutoff
Load Radiator
Closing current integrated type
260 A 420 A
(8.3 ms non-repetitive) Slim type
3-phase
Radiator
Leakage current 10 mA or less integrated type

Output ON Heatsink,
1.8 V (RMS) or less PCB board
Voltage drop phase

Voltage range 4-32 V d.c.

Impedance 4 ㏀ or less
Input
Operating voltage 3 V d.c. More than

Return voltage 1.5 V d.c. Below

Response speed 1/2 Cycle + 1 ms max

Insulation Resistance 500 V d.c. 100 ㏁ (Between input and output and case)

Withstand voltage 2,500 V a.c. (1 minute at 60 Hz)

Vibration resistance 10 -55 Hz, double amplitude: 1.5 mm, 2 hours in each of X, Y and Z directions

Shock resistance 1,000 , XㆍYㆍZ 3 times each direction

Storage temperature -30 ~ 90 ℃

Ambient temperature -20 ~ 80 ℃ (However, no condensation)

Ambient Humidity 45 ~ 85 % RH

Applied standard IEC 62314

Subordinate category LC A

Protection class IP20

Pollution level Level 2

Weight(g) 670 900

Configuration
Model Code Content
SSR- □ □ □ □ □ Solid State Relay

phase 2 phase

Contact C 2 Contact

25 25 A
Rated load current
40 40 A

Used load voltage 2 90-264 V a.c.

How to operate Z Zero cross switching

115
 SOLID STATE RELAYS

SSR-2 series NEW

Specifications
● DC input - AC load
Low voltage SSR-2D102Z SSR-2D202Z SSR-2D302Z SSR-2D402Z
Model
High voltage SSR-2D104Z SSR-2D204Z SSR-2D304Z SSR-2D404Z

Appearance

WXHXD(㎜) 42.0×64.0×27.3

Load voltage Low voltage 90-264 V a.c.

range High voltage 90-480 V a.c.

Peak Voltage Low voltage 600 V

(Non-repetition) High voltage 800 V 1,200 V

Rated load current 10 A 20 A 30 A 40 A

Load
Frequency 50/60 Hz (Common)

Surge current Low voltage 170 A 260 A 420 A

(8.3 ms No repetition) High voltage 170 A 250 A 370 A

Leakage current Max. 20 ㎃

Output ON voltage dropping Less than 1.6 V (R.M.S)

Rated Voltage 5-24 V d.c.

Operating voltage range 4.6-32 V d.c.

Input Impedance 4 ㏀ or less

Operation voltage 4.6 V d.c. More than

Input current Constant-current system : 8 ㎃ (±3)

Response Time 1/2 Cycle + 1 ㎳ max (“R” type below 1 ms)

Insulating Resistance 500 V d.c., 100 ㏁ (between the input / output and case)

Dielectric strength 2,500 V a.c. (60 ㎐ for 1 min)

Vibration resistance 10 - 55 ㎐, double amplitude : 1.5 ㎜, X,Y, and Z direction for 2 hours

Shock resistance 1,000 ㎨, X,Y,Z each axis 3 times

Storage temperature -30 ~ 90 ℃

Ambient temperature & humidity -5 ~ 40 ℃, 45 ~ 85 % RH (without condensation)

Pollution degree Level 2

purpose of use Resistive load / inductive load

Accepted standard IEC 62314

Weight (g) 89

116
 Solid State Relays
● AC input - AC load
Low voltage SSR-2A102Z SSR-2A202Z SSR-2A302Z SSR-2A402Z
Model
High voltage SSR-2A104Z SSR-2A204Z SSR-2A304Z SSR-2A404Z

New product
Phase

Appearance
General type
phase

Multifunctional
3-phase
Radiator
WXHXD(㎜) 42.0×64.0×27.3 integrated type

Load voltage Low voltage 90-264 V a.c.

New product
range High voltage 90-480 V a.c. 3-phase

Peak Voltage Low voltage 600 V

General type
(Non-repetition) High voltage 800 V 1,200 V 3-phase

Rated load current 10 A 20 A 30 A 40 A Slim type

Load phase
Radiator
Frequency 50/60 Hz (Common) integrated type

Surge current Low voltage 170 A 260 A 420 A Slim type

2-line cutoff
(8.3 ms No repetition) High voltage 170 A 250 A 370 A Radiator
integrated type

Leakage current Max. 20 ㎃ Slim type

3-phase
Radiator
Output ON voltage dropping Less than 1.6 V (R.M.S) integrated type

Rated Voltage 100-240 V a.c. Heatsink,

PCB board
Operating voltage range 70-264 V a.c. phase

Input Impedance 40 ㏀ or less

Operation voltage 70 V a.c. More than

Input current Constant-current system : 8 ㎃ (±3)

Response Time 1/2 Cycle + 1 ㎳ max (“R” type below 1 ms)

Insulating Resistance 500 V d.c., 100 ㏁ (between the input / output and case)

Dielectric strength 2,500 V a.c. (60 ㎐ for 1 min)

Vibration resistance 10 - 55 ㎐, double amplitude : 1.5 ㎜, X,Y, and Z direction for 2 hours

Shock resistance 1,000 ㎨, X,Y,Z each axis 3 times

Storage temperature -30 ~ 90 ℃

Ambient temperature & humidity -5 ~ 40 ℃, 45 ~ 85 % RH (without condensation)

Pollution degree Level 2

purpose of use Resistive load / inductive load

Accepted standard IEC 62314

Weight (g) 89

Suffix code
Model Code Content
SSR-2 □ □ □ □ Single-phase general type solid state relay
D 5-24 V d.c.
Input voltage
A 100-240 V a.c.
10 10 A
20 20 A
Rated load current
30 30 A
40 40 A
2 90-264 V a.c. (Low voltage)
Used load voltage
4 90-480 V a.c. (High voltage)
Z Zero cross switching (standard product)
How it works
R Random switching

117
 SOLID STATE RELAYS

HSR-2 series
Specifications
● DC input - AC load
Low voltage HSR-2D102□ HSR-2D202□ HSR-2D302□ HSR-2D402□ HSR-2D502□ HSR-2D702□
Model
High voltage HSR-2D104□ HSR-2D204□ HSR-2D304□ HSR-2D404□ HSR-2D504□ HSR-2D704□

Appearance

WXHXD(㎜) 44.0×64.0×28.6

Low voltage 90-264 V a.c.

Usage Load Voltage
High voltage 90-480 V a.c.

Peak voltage Low voltage 600 V 800 V

(Non-repeating) High voltage 800 V 1,200 V

Rated load current 10 A 20 A 30 A 40 A 50 A 70 A

Load Frequency 25-65 Hz

Input current Low voltage 170 A 250 A 315 A 580 A

(8.3 ms non-repeating) High voltage 170 A 250 A 350 A 370 A 580 A

Low voltage 15 ㎃
Leakage current
High voltage 20 ㎃

Output ON voltage drop 1.3 V 1.6 V 1.8 V

Rated voltage 5-24 V d.c.

Operating voltage range 4-32 V d.c.

Input Impedance 4 ㏀ or less

Operating voltage 3 V d.c. More than

Current input Constant current method : 10 ㎃ (± 3)

Response time 1/2 cycle +1 ㎳ max (1ms or less)

Insulation Resistance 500 V d.c., 100 ㏁ (Between input and output and case)

Voltage withstand 2500 V a.c.(1 minute at 60 Hz)

Vibration resistance 10-55 Hz, double amplitude : 1.5 ㎜ X, Y, Z directions for 2 hours each

Shock resistance 1000 ㎨ X, Y, Z directions 3 times each

Storage temperature -30 ~ 90 ℃

Ambient temperature and humidity -20 ~ 80 ℃, 45 ~ 85% RH (without condensation)

Weight Radiator detachable type 150

(g) Radiator integrated type For 50 A: 1,400 For 70 A: 2,050

118
 Solid State Relays
● DC input - AC load
Low voltage HSR-2A102□ HSR-2A202□ HSR-2A302□ HSR-2A402□ HSR-2A502□ HSR-2A702□
Model
High voltage HSR-2A104□ HSR-2A204□ HSR-2A304□ HSR-2A404□ HSR-2A504□ HSR-2A704□

New product
Phase

Appearance
General type
phase

Multifunctional
3-phase
WXHXD(㎜) 44.0×64.0×28.6 Radiator
integrated type
Low voltage 90-264 V a.c.
Usage Load Voltage New product
High voltage 90-480 V a.c. 3-phase

Peak voltage Low voltage 600 V 800 V

(Non-repeating) General type
High voltage 800 V 1,200 V 3-phase

Rated load current 10 A 20 A 30 A 40 A 50 A 70 A

Slim type
phase
Load Frequency 25-65 Hz Radiator
integrated type
Input current Low voltage 170 A 250 A 315 A 580 A
Slim type
(8.3 ms non-repeating) High voltage 2-line cutoff
170 A 250 A 350 A 370 A 580 A Radiator
integrated type
Low voltage 15 ㎃
Slim type
Leakage current 3-phase
High voltage 20 ㎃ Radiator
integrated type
Output ON voltage drop 1.3 V 1.6 V 1.8 V
Heatsink,
Rated voltage 100-240 V a.c. PCB board
phase
Operating voltage range 90-264 V a.c.

Input Impedance 40 ㏀ or less

Operating voltage 72 V a.c. More than

Current input 240 V a.c. / 9 ㎃ (± 4)

Response time 1/2 cycle +1 ㎳ max (1ms or less)

Insulation Resistance 500 V d.c., 100 ㏁ (Between input and output and case)

Voltage withstand 2500 V a.c.(1 minute at 60 Hz)

Vibration resistance 10-55 Hz, double amplitude : 1.5 ㎜ X, Y, Z directions for 2 hours each

Shock resistance 1000 ㎨ X, Y, Z directions 3 times each

Storage temperature -30 ~ 90 ℃

Ambient temperature and humidity -20 ~ 80 ℃, 45 ~ 85% RH (without condensation)

Weight Radiator detachable type 150

(g) Radiator integrated type For 50 A : 1,400 For 70 A : 2,050

Suffix code
Model Code Content
HSR-2 □ □ □ □ □ Single phase solid state relay
D 4-32 V d.c.
Voltage input
A 90-264 V a.c.
10 10 A
20 20 A
30 30 A
Rated load current
40 40 A
50 50 A
70 70 A
2 90-264 V a.c. (Low voltage)
Load voltage
4 90-480 V a.c. (High voltage)
Z Zero cross switching
The mode of operationally
R Random switching
No radiator
W/W with radiator attached
T Radiator integrated type (50 A, 70 A only)

119
 SOLID STATE RELAYS

SSR-3 series NEW

Specifications
● DC Input - AC Load
Low voltage SSR-3D102Z SSR-3D202Z SSR-3D302Z SSR-3D402Z
Model
High voltage SSR-3D104Z SSR-3D204Z SSR-3D304Z SSR-3D404Z

Appearance

W X H X D (㎜) 109.0×60.0×31.3

Low voltage 90-264 V a.c.

Usage load voltage
High voltage 90-480 V a.c.

Peak voltage Low voltage 600 V

(Non-repeating) High voltage 800 V 1,200 V

Rated load current 10 A 20 A 30 A 40 A

Load
Frequency 50/60 Hz (Common)

Input current Low voltage 170 A 260 A 420 A

(8.3 ms non-repeating) High voltage 170 A 250 A 370 A

Leakage current 20 ㎃ or less

Output ON voltage drop 1.6 V (RMS) or less

Rated voltage 5-24 V d.c.

Operating voltage range 4.6-32 V d.c.

Input Impedance 4 ㏀ or less

Operating voltage 4.6 V d.c. More than

Current input Constant current method: 12 ㎃ (±3)

Response time 1/2 Cycle + 1 ㎳ max (“R” type 1 ㎳ or less)

Insulation Resistance 500 V d.c., 100 ㏁ (between input and output and case)

Voltage withstand 2,500 V a.c. (1 minute at 60 Hz)

Vibration resistance 10-55 ,, width of retrofit : 1.5 mm, X, Y, and Z for 2 hours each.

Shock resistance 1,000 ㎨, 3 times in each of X, Y, and Z directions

Storage temperature -30 ~ 90 ℃

Ambient temperature and humidity -5 ~ 40 ℃, 45 ~ 85 % RH (without condensation)

Pollution degree Level 2

Use Purpose resistive/inductive loads

Application Specification IEC 62314

Weight (g) 227

Suffix code
Model Code Content
SSR-3 □ □ □ □ 3-phase, normal contactless relay
D 5-24 V d.c.
Input voltage
A 100-240 V a.c.
10 10 A
20 20 A
Rated load current
30 30 A
40 40 A
2 90-264 V a.c. (Low voltage)
Used load voltage
4 90-480 V a.c. (High voltage)
Z Zero Cross Switching (Standard)
The mode of operationally
R Random switching

120
 Solid State Relays

New product
Phase
● AC Input - AC Load
Low voltage SSR-3A102Z SSR-3A202Z SSR-3A302Z SSR-3A402Z General type
Model phase
High voltage SSR-3A104Z SSR-3A204Z SSR-3A304Z SSR-3A404Z
Multifunctional
3-phase
Radiator
integrated type

Appearance New product

3-phase

General type
3-phase

W X H X D (㎜) 109.0×60.0×31.3 Slim type

phase
Low voltage 90-264 V a.c. Radiator
Usage load voltage integrated type
High voltage 90-480 V a.c. Slim type
2-line cutoff
Peak voltage Low voltage 600 V Radiator
integrated type
(Non-repeating) High voltage 800 V 1,200 V Slim type
3-phase
Rated load current 10 A 20 A 30 A 40 A Radiator
Load integrated type
Frequency 50/60 Hz (Common)
Heatsink,
PCB board
Input current Low voltage 170 A 260 A 420 A phase
(8.3 ms non-repeating) High voltage 170 A 250 A 370 A

Leakage current 20 ㎃ or less

Output ON voltage drop 1.6 V (RMS) or less

Rated voltage 100-240 V a.c.

Operating voltage range 70-26 4V a.c.

Input Impedance 40 ㏀ or less

Operating voltage 70 V a.c. More than

Current input Constant current method: 12 ㎃ (±3)

Response time 1/2 Cycle + 1 ㎳ max (“R” type 1 ㎳ or less)

Insulation Resistance 500 V d.c., 100 ㏁ (between input and output and case)

Voltage withstand 3,000 V a.c. (1 minute at 60 Hz)

Vibration resistance 10-55 Hz , width of retrofit : 1.5 mm, X, Y, and Z for 2 hours each.

Shock resistance 1,000 ㎨, 3 times in each of X, Y, and Z directions

Storage temperature -30 ~ 90 ℃

Ambient temperature and humidity -5 ~ 40 ℃, 45 ~ 85 % RH (without condensation)

Pollution degree Level 2

Use Purpose resistive/inductive loads

Application Specification IEC 62314

Weight (g) 227

Suffix code
Model Code Content
SSR-3 □ □ □ □ 3-phase, normal contactless relay
D 5-24 V d.c.
Input voltage
A 100-240 V a.c.
10 10 A
20 20 A
Rated load current
30 30 A
40 40 A
2 90-264 V a.c. (Low voltage)
Used load voltage
4 90-480 V a.c. (High voltage)
Z Zero Cross Switching (Standard)
The mode of operationally
R Random switching

121
 SOLID STATE RELAYS

HSR-3 series
Specifications
● DC input-AC load (for low voltage : 90-264 V a.c.)
Low voltage HSR-3D102□ HSR-3D202□ HSR-3D302□ HSR-3D402□ HSR-3D502□ HSR-3D702□
Model
High voltage HSR-3D104□ HSR-3D204□ HSR-3D304□ HSR-3D404□ HSR-3D504□ HSR-3D704□

Appearance

WXHXD(㎜) 109.0×74.8×34.5

Low voltage 90-264 V a.c.

Usage Load Voltage
High voltage 90-480 V a.c.

Peak voltage Low voltage 600 V 800 V

(Non-repeating) High voltage 800 V 1,200 V

Rated load current 10 A 20 A 30 A 40 A 50 A 70 A

Frequency 25-65 Hz
Load
Input current Low voltage 125 A 260 A 315 A 580 A
(8.3 ms non-repeating) High voltage 170 A 250 A 315 A 580 A

Low voltage 1.5 ㎃ 1.8 ㎃ or less 1.5 ㎃

Leakage current
High voltage 20 ㎃ or less

Output ON Low voltage 1.5 V 1.8 V

voltage drop High voltage 1.95 V 1.8 V

Rated voltage 5-24 V d.c.

Operating voltage range 4-32 V d.c.

Input Impedance 4 ㏀ or less

Operating voltage 3 V d.c. More than

Current input Constant current method: 14 ㎃ (± 3)

Response time 1/2cycle + 1 ms max (less than 1 ms)

Insulation Resistance 500 V d.c., 100 ㏁ (between input and output and case)

Withstand voltage 2,500 V a.c. (1 minute at 60Hz)

Vibration resistance 10-55 Hz, double amplitude : 1.5 ㎜, 2 hours in each of X, Y, and Z directions

Shock resistance 1,000 ㎨, 3 times in each of X, Y, and Z directions

Storage temperature -30 ~ 90 ℃

Ambient temperature and humidity -20 ~ 80 ℃, 45 ~ 85% RH (without condensation)

Weight Radiator detachable type 400 -

(g) Radiator integrated type - 2,000 2,600

122
 Solid State Relays
● AC input-AC load
Low voltage HSR-3D102□ HSR-3D202□ HSR-3D302□ HSR-3D402□ HSR-3D502□ HSR-3D702□
Model
High voltage HSR-3D104□ HSR-3D204□ HSR-3D304□ HSR-3D404□ HSR-3D504□ HSR-3D704□

New product
Phase

Appearance
General type
phase

Multifunctional
3-phase
Radiator
WXHXD(㎜) 109.0×74.8×34.5 integrated type

Low voltage 100-240 V a.c.

New product
Usage Load Voltage 3-phase
High voltage 90-264 V a.c.

Peak voltage Low voltage 600 V 800 V

General type
3-phase
(Non-repeating) High voltage 800 V 1,200 V

Rated load current 10 A 20 A 30 A 40 A 50 A 70 A Slim type

phase
Radiator
Frequency 25-65 Hz integrated type
Load
Low voltage 125 A 260 A 315 A 580 A Slim type
Input current 2-line cutoff
Radiator
(8.3 ms non-repeating) High voltage 170 A 250 A 315 A 580 A integrated type

Low voltage 20 ㎃ 1.5 ㎃ Slim type

3-phase
Leakage current Radiator
High voltage 20 ㎃ or less integrated type

Output ON Low voltage 1.5 V 1.8 V Heatsink,

PCB board
voltage drop High voltage 1.95 V 1.8 V phase

Rated voltage 100-240 V a.c.

Operating voltage range 90-264 V a.c.

Input Impedance 40 ㏀ or less

Operating voltage 72 V a.c. More than

Current input 240 V a.c. / 9 ㎃ (± 4)

Response time 1/2 cycle + 1 ms max (less than 1 ms)

Insulation Resistance 500 V d.c., 100 ㏁ (between input and output and case)

Withstand voltage 2,500 V a.c. (1 minute at 60Hz)

Vibration resistance 10-55 Hz, double amplitude : 1.5 ㎜, 2 hours in each of X, Y, and Z directions

Shock resistance 1,000 ㎨, 3 times in each of X, Y, and Z directions

Storage temperature -30 ~ 90 ℃

Ambient temperature and humidity -20 ~ 80 ℃, 45 ~ 85% RH (without condensation)

Weight Radiator detachable type 400 -

(g) Radiator integrated type - 2,000 2,600

Suffix code
Model Code Content
HSR-3 □ □ □ □ □ 3-Phase solid-state relay
D 4-32 V d.c.
Voltage input
A 90-264 V a.c.
10 10 A
20 20 A
30 30 A
Rated load current
40 40 A
50 50 A
70 70 A
2 90-264 V a.c. (Low voltage)
Load voltage
4 90-480 V a.c. (High voltage)
Z Zero cross switching (standard product)
The mode of operationally
R Random switching
No radiator
Whether or not radiator is attached
T Radiator integrated type (50 A, 70 A only)

(Note) Operation method Z : Zero cross switching, R : Random switching

123
 SOLID STATE RELAYS

HSR-SL series
Specifications
Low voltage HSR-SLD152Z HSR-SLD252Z HSR-SLD402Z
Model
High voltage HSR-SLD154Z HSR-SLD254Z HSR-SLD404Z

Appearance

CE 22.4×99.0×98.5 44.4×99.0×98.5
WXHXD(㎜)
S-MARK 22.4×99.0×98.5 44.4×99.0×98.5 85.0×114.0×118.0

Usage Load Low voltage 90-264 V a.c.

Voltage High voltage 90-480 V a.c.

Peak voltage Low voltage 600 V

(Non-repeating) High voltage 800 V 1,200 V
Rated load current 15 A 25 A 40 A
Load
Frequency 50/60 Hz (Common)
Input current Low voltage 170 A 260 A 420 A
(8.3 ms non-
High voltage 170 A 250 A 370 A
repeating)
Leakage current 20 ㎃ or less
Output ON voltage drop 1.6 V (RMS) or less
Rated voltage 5-24 V d.c.
Operating voltage range 4-32 V d.c.
Impedance 4 ㏀ or less
Input
Operating voltage 3 V d.c. More than
Return voltage 1.5 V d.c.or less
Current input Constant current method: 8 ㎃ (±3)
Response time 1/2 Cycle + 1 ㎳ max. (“R” type 1 ms or less)
Insulation Resistance 500 V d.c., 100 ㏁ (between input and output and case)
Withstand voltage 3,000 V a.c. (1 minute at 60 Hz)
Vibration resistance 10-55 ㎐, double amplitude : 1.5 ㎜, 2 hours in each of X, Y, and Z directions
Shock resistance 1,000 ㎨, 3 times in each of X, Y, and Z directions
Storage temperature -30 ~ 90 ℃
Ambient temperature and humidity -5 ~ 40 ℃, 45 ~ 85% RH (However, there should be no condensation)
Pollution degree Level 2
Use Purpose Resistive load / inductive load
Applied standard IEC 62314
Weight (g) 230 372

Suffix code
Model Code Content
HSR-SL □ □ □ □ □ -□ Slim type single phase solid state relay
Input voltage D 4-32 V d.c.
- 1 Contact (no mark)
Contact
2C 2 contacts (15 A only)
15 15 A
※ The 2-contact type is only available for the
Rated load current 25 25 A
low/high voltage type of 15 A product.
40 40 A
(HSR-SLD2C152Z, HSR-SLD2C154Z)
2 90-264 V a.c. (Low voltage)
Used load voltage
4 90-480 V a.c. (High voltage)
Z Zero cross switching (standard product)
The mode of operationally
R Random switching
Optional BI Bimetal 60 ℃ / 80 ℃ mark

124
 Solid State Relays

HSR-2SLD series
Specifications
(HSR-2SLD)

New product
Phase
Low voltage HSR-2SLD252Z HSR-2SLD402Z
Model
High voltage HSR-2SLD254Z HSR-2SLD404Z General type
phase

Multifunctional
3-phase
Radiator
Appearance integrated type

New product
3-phase

Low voltage 95.0×96.6×156.7 General type

WXHXD(㎜) 79.0×96.6×131.3 3-phase
High voltage 110.0×133.0×140.1
Low voltage 90-264 V a.c. Slim type
Usage Load Voltage phase
High voltage 90-480 V a.c. Radiator
integrated type
Peak voltage Low voltage 600 V
Slim type
(Non-repeating) High voltage 1,200 V 2-line cutoff
Radiator
Rated load current 25 A 40 A integrated type
Load
Frequency 50/60 Hz (Common) Slim type
3-phase
Input current Low voltage 260 A 420 A Radiator
integrated type
(8.3 ms non-repeating) High voltage 250 A 370 A
Heatsink,
Leakage current 10 ㎃ or less PCB board
Output ON voltage drop 1.8 V (RMS) or less phase

Rated impulse Low voltage 4㎸

withstand voltage High voltage 6㎸
Rated voltage 5-24 V d.c.
Operating voltage range 4-32 V d.c.
Impedance 4 ㏀ or less
Input
Operating voltage 3 V d.c. More than
Return voltage 1.5 V d.c. or less
Current input Constant current method : 10 ㎃ (±3)
Rated voltage 24 V d.c.
Operating voltage range 20-26 V d.c.
Power Consumption 25 ㎃ or less, 40 ㎃ or less in case of alarm output (based on 24 V d.c.)
Detection
Collector internal pressure 30 V d.c. or less
unit
Current through current 50 ㎃ or less
Collector power consumption 500 ㎽
Output form Transistor open collector (High when abnormality is detected)
Response time 1/2 Cycle + 1 ㎳ max. (“R” type 1 ms or less)
Insulation Resistance 500 V d.c., 100 ㏁ (between input and output and case)
Withstand voltage 2,500 V a.c. (1 minute at 60 Hz)
Vibration resistance 10-55 ㎐, double amplitude : 1.5 ㎜, 2 hours in each of X, Y, and Z directions
Shock resistance 1,000 ㎨, 3 times in each of X, Y, and Z directions
Storage temperature -30 ~ 90 ℃
Ambient temperature and humidity -20 ~ 80 ℃, 45 ~ 85 % RH (without condensation)
Pollution degree Level 2
Protection structure IP20 (IEC 60529)
Purpose of use Resistive load / inductive load
Applied standard IEC 62314
Weight (g) 1,000 1,300

Suffix code
Model Code Content
HSR-2SLD □ □ □ 2-wire cut-off alarm output solid-state relay (alarm open collector output)
25 25 A
Rated load current
40 40 A
2 90-264 V a.c. (Low voltage)
Used load voltage
4 90-480 V a.c. (High voltage)
Z Zero cross switching (standard product)
The mode of operationally
R Random switching

125
 SOLID STATE RELAYS

HSR-3SL series
Specification
Low voltage HSR-3SLD152Z HSR-3SLD252Z HSR-3SLD402Z
Model
High voltage HSR-3SLD154Z HSR-3SLD254Z HSR-3SLD404Z

Appearance

WXHXD(㎜) 79.0×96.6×120.0 95.0×96.6×146.0

Usage Load Low voltage 90-264 V a.c.

Voltage High voltage 90-480 V a.c.

Peak voltage Low voltage 600 V

(Non-repeating) High voltage 800 V 1,200 V

Rated load current 15 A (40 ℃) 25 A (25 ℃) 40 A (25 ℃)

Load
Frequency 50/60 Hz (Common)
Input current Low voltage 170 A 260 A 420 A
(8.3 ms non-
repeating) High voltage 170 A 250 A 370 A

Leakage current 20 ㎃ or less

Output ON voltage drop 1.6 V (RMS) or less

Rated voltage 5-24 V d.c.

Operating voltage range 4-32 V d.c.

Impedance 4 ㏀ or less
Input
Operating voltage 3 V d.c. More than

Return voltage 1.5 V d.c. or less

Current input Constant current method : 10 ㎃ (±3)

Response time 1/2 Cycle + 1 ㎳ max. (“R” type 1 ㎳ or less)

Insulation Resistance 500 V d.c., 100 ㏁ (between input and output and case)

Withstand voltage 3,000 V a.c. (1 minute at 60 Hz)

Vibration resistance 10-55 ㎐, double amplitude : 1.5 ㎜, 2 hours in each of X, Y, and Z directions

Shock resistance 1,000 ㎨, 3 times in each of X, Y, and Z directions

Storage temperature -30 ~ 90 ℃

Ambient temperature and humidity -20 ~ 80 ℃, 45 ~ 85 % RH (without condensation)

Weight (g) 1,000 1,300

Suffix code
Model Code Content
HSR-3SL □ □ □ □ Slim type 3-phase solid-state relay
Input voltage D 4-32 V d.c.
15 15 A
Rated load current 25 25 A
40 40 A
2 90-264 V a.c. (Low voltage)
Used load voltage
4 90-480 V a.c. (High voltage)
Z Zero cross switching (standard product)
The mode of operationally
R Random switching

126
 Solid State Relays

HSP/HSM/HSN series
■ HSP series / HSM series New product
Phase
HSP-10 HSP-20 HSP-40 HSM-70 HSM-110 HSM-150 HSM-200 HSM-250
Model HSR-2□10□□ HSR-2□20□□ HSR-2□30□□ HSR-2□10□□ HSR-2□20□□ HSR-2□40□□ HSR-3□20□□ HSR-3□40□□ General type
phase
- - HSR-2□40□□ - HSR-2□30□□ HSR-3□10□□ HSR-3□30□□ -
Multifunctional
3-phase
Appearance Radiator
integrated type

10 A 20 A 30 A 10 A 20 A 40 A 20 A 40 A New product
Capacity 3-phase
- - 40 A - 30 A 10 A 30 A -
Length (㎜) 48 80 109 70 110 150 200 250
General type
3-phase
■ HSN series
Slim type
HSN-80 HSN-120 HSN-80-F HSN-120-F phase
Model Radiator
HSR-2□50□□ HSR-2□70□□ HSR-3□50□□ HSR-3□40□□ integrated type
With or without fan Without Without With With Slim type
2-line cutoff
Radiator
integrated type
Appearance
Slim type
3-phase
Radiator
50 A 70 A 50 A 70 A integrated type
Capacity
- - - - Heatsink,
Length (㎜) 80 120 92X92X25T 92X92X25T PCB board
phase

HSR-PD series
Specifications
Model HSR-PD032Z HSR-PD052Z HSR-PD082Z

Appearance

WXHXD(㎜) 35.0×19.0×8.0 37.5×23.2×10.6 35.0×36.7×20.0

Rated load voltage 100-220 V a.c.
Used load voltage 90-240 V a.c.
Peak voltage (non-repeating) 600 V
Rated load current 3A 5A 8A
Load
Frequency 50/60 ㎐
Input current 30 A 60 A 120 A
Leakage current 10 ㎃ or less
Output ON voltage drop 1.6 V (rms) or less
Rated voltage 5-24 V d.c.
Operating voltage range 4-32 V d.c.
Impedance 4 ㏀ or less
Input
Operating voltage 3 V d.c. More than
Return voltage 1.5 V d.c. or less
Current input Constant current method : 10 ㎃ (±3)
Response time 1/2 cycle + 1 ㎳ max
Insulation Resistance 500 V d.c., 100 ㏁ (between input and output and case)
Voltage withstand 2500 V a.c. (1 minute at 60 Hz)
Vibration resistance 10-55 ㎐, double amplitude : 1.5 ㎜, 2 hours in each of X, Y, and Z directions
Shock resistance 100 ㎨, 3 times each in X, Y, Z directions
Storage temperature -30 ~ 90 ℃
Ambient temperature and humidity -20 ~ 80 ℃, 45 ~ 85 % RH (without condensation)
Weight (g) 10 22 27

Suffix code
Model Code Content
HSR-P □ □ □ □ Single-phase solid-state relay for printed circuit boards
Input voltage D 4-32 V d.c.
03 3A
Rated load current 05 5A
08 8A
Used load voltage 2 90-240 V a.c. (Low voltage)
Z Zero cross switching
The mode of operationally
R Random switching

127
 POWER SUPPLIES

TPS series
Specifications
Model TPS-15S TPS-30S TPS-50S TPS-75S TPS-100S

Appearance

W×H×D (㎜) 64.1×97.6×32.0 79.0×98.0×37.0 83.0×125.0×38.8 96.0×135.0×40.2 93.0×199.0×50.0

Power output 15 W 30 W 50 W 75 W 100 W

Manual-select input
Input voltage Free voltage 100-240 V a.c. (50/60 ㎐) 100-120 V a.c. 50/60 ㎐/
200-240 V a.c. 50/60 ㎐

Output voltage 5 V, 12 V, 15 V, 24 V d.c. 5 V, 12 V, 15 V, 24 V d.c.

Voltage fluctuation range ±5 ~ ±10 % (Varies due to the internal VR)

Protective circuit ● Overcurrent, ● Overvoltage, ● Overheating, ● Output short-circuit protection

● 2,700 V a.c. 1 minute, detection current = 10 ㎃, (input-output)
Dielectric strength
● 1,500 V a.c. 1 minute, detection current = 10 ㎃, (input-FG) ● 500 V a.c. 1 minute, detection current = 10 ㎃, (output-FG)
Insulation resistance 100 ㏁ min, 500Vd.c. (Input - Output)

Model TPS-150S TPS-220S TPS-350S TPS-450S

Appearance

W×H×D (㎜) 93.0×209.0×65.0 93.0×209.0×65.0 115.0×230.0×50.0 115.0×230.0×50.0

Power output 150 W 220 W 350 W 450 W
Manual-select input Free voltage
Input voltage
100-120 V a.c. 50/60 ㎐ / 200-240 V a.c. 50/60 ㎐ 100-240 V a.c. 50/60 ㎐
Output voltage 5 V,12 V,15 V,24 V d.c. 12 V, 15 V, 24 V d.c. 12 V, 24 V, 48 V d.c.
Voltage fluctuation range ±5 ~ ±10 % (Depends on internal VR)
Protective circuit ● Overcurrent, ● Overvoltage, ● Overheating, ● Output short-circuit protection
● 2,700 V a.c. 1 minute, detection current = 10 ㎃, (input-output)
Dielectric strength
● 1,500 V a.c. 1 minute, detection current = 10 ㎃, (input-FG) ● 500 V a.c. 1 minute, detection current = 10 ㎃, (output-FG)
Insulation resistance 100 ㏁ min, 500 V d.c. (Input-output)

Suffix code
Model Code Content
TPS- □ □- □ Enclosed Type
15 15 W
30 30 W
50 50 W
75 75 W
Power output 100 100 W
150 150 W
220 220 W
350 350 W
450 450 W
Number of output voltage S 1 Output
05 5 V d.c. (220 W, 350 W, 450 W Exclude)
12 12 V d.c.
Output voltage classification 15 15 V d.c. (350 W, 450 W Exclude)
24 24 V d.c.
48 48 V d.c. (15 W, 30 W, 50 W, 75 W, 100 W, 150 W, 220 W Exclude)

128
 Power Supplies

DPS series
Specifications Enclosed
type

Model DPS-15S DPS-30S DPS-50S DPS-75S

DIN rail
type

Small type
DIN rail
Appearance type

W×H×D (㎜) 25.0×90.0×103.0 40.0×90.0×103.0 40.0×90.0×103.0 56.0×124.0×97.8

Power output 15 W 30 W 50 W 75 W
Input voltage 100-240 V a.c. (Free power)
Output voltage 5 V, 12 V, 15 V, 24 V d.c. 12 V, 24 V, 48 V d.c.
Voltage fluctuation range ±5 ~ 10 % (Varies due to the internal VR)
Protective circuit ● Overcurrent, ● Overvoltage, overheat, ● Output short-circuit protection, ● DC OK display function

● 2,700 V a.c. 1 minute, detection current =10 ㎃, (input-output) ● 1,500 V a.c. 1 minute, detection current = 10 ㎃, (input-FG)
Dielectric strength
● 500 V a.c. 1 minute, detection current = 10 ㎃, (output-FG) ● 500 V a.c. 1 minute, detection current = 10 ㎃, (output-DC OK)

Insulation resistance 50 ㏁ or more. (Input-Output, FG), (Output-FG, DC OK)

Model DPS-100S DPS-120S DPS-180S DPS-240S

Appearance

W×H×D (㎜) 56.0×124.0×97.8 66.0×124.0×97.8 66.0×124.0×97.8 125.5×124.0×97.8

240 W
Power output 100 W 120 W 180 W (※ However, DPS-240S-12 is
216W)
100-240 V a.c. 50/60 ㎐
Input voltage 100-120 V a.c. 50/60 ㎐/ 200-240 V a.c. 50/60 ㎐(Automatic input selection)
(Free power)
Output voltage 12 V, 24 V, 48 V d.c. 24 V, 48 V d.c. 12 V, 24 V, 48 V d.c.
Voltage fluctuation range ±5 ~ 10 % (Depends on internal VR)
Protective circuit ● Overcurrent, ● Overvoltage, Overheat, ● Output short-circuit protection, ● DC OK display, ● DC OK output function
● 2,700 V a.c. 1 minute, detection current =10 ㎃, (input-output) ● 1,500 V a.c. 1 minute, detection current = 10 ㎃, (input-FG)
Dielectric strength
● 500 V a.c. 1 minute, detection current = 10 ㎃, (output-FG) ● 500 V a.c. 1 minute, detection current = 10 ㎃, (output-DC OK)
Insulation resistance 50㏁ or more (input-output, FG), (output-FG, DC OK)

Suffix code
Model Code Content
DPS- □ □ □ DPS Power Supply (DIN Rail Type)
15 15 W
30 30 W
50 50 W
75 75 W
Power output
100 100 W
120 120 W
180 180 W
240 240 W (※ only DPS-240S-12 : 216 W)
Number of output voltage S 1 Output (single output)
05 5 V d.c. (DPS-75S, DPS-100S, DPS-120S, DPS-180S, DPS-240S excluded)
12 12 V d.c. (DPS-180S excluded)
Output voltage classification 15 15 V d.c. (DPS-75S, DPS-100S, DPS-120S, DPS-180S, DPS-240S excluded)
24 24 V d.c.
48 48 V d.c. (DPS-15S, DPS-30S, DPS-50S excluded)

129
 POWER SUPPLIES

HNPS series
Specifications
Model HNPS-03S HNPS-07S

Appearance

W×H×D (㎜) 36.0×80.0×65.0

Power output 3W 7.5W
Input voltage 100-240 V a.c. 50/60 ㎐ ±10% of power supply voltage
Output voltage 5 V, 12 V, 15 V, 24 V
Voltage fluctuation range ±5 ~ 10 % (varies due to the internal VR)
Protective circuit Over voltage, Over current, Over heat, Short circuit
● 3 kVAC (between input and output), 1.5 kVAC (between input and FG),
Dielectric strength
● 500 V a.c. (Between output and FG), (detection current: 10 mA, for 1 min)
Insulation Resistance 100 MΩ or more (between input and output, at 500 V d.c.)
Weight (g) 120

Suffix code
Model Code Content
HNPS- □ □ □ □ DPS Power Supply (DIN Rail Type)
03 3W
Power output
07 7.5 W
Number of output voltage S 1 Output (Single output)
05 5 V d.c.
12 12 V d.c.
Output voltage classification
15 15 V d.c.
24 24 V d.c.
Structure D Rail structure (DIN)

130
 Control Switches

DR series NEW
New product
Product composition Control switch

Push button switch

High-end
Model Chrome plated guard type Plastic guard type Plastic guard type Control switch

Flat Ø22 Protrusion Ø16 Flat Ø22 Protrusion Ø16 Square Ø16 Rectangular Ø16
New product
assembly
Indicator light
Rectangular
indicator light
Appearance
Power switch
Main switch

Actuator code DRF-A DRF-R DRF-K DRF-T DRF-S DRF-O Cam switch

Illuminated pushbutton switch

Model Chrome plated guard type Plastic guard type Plastic guard type Limit
switch
Flat Ø22 Protrusion Ø16 Flat Ø22 Protrusion Ø16 Square Ø16 Rectangular Ø16

Micro
switch

Appearance
Foot switch
Mono lever
switch

Actuator code DRX-A DRX-R DRX-K DRX-T DRX-S DRX-O Hoist

switch
Indicator light
Model Chrome plated guard type Plastic guard type Plastic guard type
Flat Ø22 Protrusion Ø16 Flat Ø22 Protrusion Ø16 Square Ø16 Rectangular Ø16

Appearance

Actuator code DRP-A DRP-R DRP-K DRP-T DRP-S DRP-O

Selector switch
Model Chrome plated guard type Plastic guard type Plastic guard type
Flat Ø22 Protrusion Ø16 Flat Ø22 Protrusion Ø16 Square Ø16 Rectangular Ø16

Appearance

Actuator code DRS-A DRS-R DRS-K DRS-T DRS-S DRS-O

Illuminated selector switch
Model Chrome plated guard type Plastic guard type Plastic guard type
Flat Ø22 Protrusion Ø16 Flat Ø22 Protrusion Ø16 Square Ø16 Rectangular Ø16

Appearance

Actuator code DRT-A DRT-R DRT-K DRT-T DRT-S DRT-O

KEY selector switch
Model Chrome plated guard type Plastic guard type Plastic guard type
Flat Ø22 Protrusion Ø16 Flat Ø22 Protrusion Ø16 Square Ø16 Rectangular Ø16

Appearance

Actuator code DRK-A DRK-R DRK-K DRK-T DRK-S DRK-O

131
 CONTROL SWITCHES
Emergency stop switch
Model Chrome plated guard type Plastic guard type
Flat Ø22 Protrusion Ø16 Flat Ø22 Protrusion Ø16

Appearance

Actuator code DRE-AM DRE-RM DRE-KM DRE-TM

Appearance

Actuator code DRE-AA DRE-RA DRE-KA DRE-TA

Appearance

Actuator code DRE-AR DRE-RR DRE-KR DRE-TR

Illuminated emergency stop switch
Model Chrome plated guard type Plastic guard type
Flat Ø22 Protrusion Ø16 Flat Ø22 Protrusion Ø16

Appearance

Actuator code DRA-AM DRA-RM DRA-KM DRA-TM

Appearance

Actuator code DRA-AA DRA-RA DRA-KA DRA-TA

Appearance

Actuator code DRA-AR DRA-RR DRA-KR DRA-TR

Accessories
Emergency protection cover Front protective cover Anti-rotation ring
Model HSC-16PS
HEG-16 (Protrusion) HSC-16P (Protrusion) HSC-22F (Flat) DR Ø16 Anti-rotation ring
(Protruding square)
Application Model DRE-R, DRE-T, DRA-R, DRA-T DRF-R, DRF-T, DRX-R, DRX-T DRF-S, DRF-O, DRX-S, DRX-O DRF-A, DRS-K, DRX-A, DRX-K Ø16 Common

Appearance

Suffix Code Specification

Model Code Content Rating 250 V a.c. 3 A
DRF - □ Push button switch
Insulation Resistance 100㏁ or more
DRX - □ Illuminated pushbutton switch
Withstand voltage 1500 V a.c. 1 minute at 50/60 ㎐
DRP - □ Indicator light
DRS - □ Selector switch Contact contact resistance 50 ㏁ or less
DRT - □ Illuminated selector switch Vibration resistance 10-55 ㎐ double amplitude 3 ㎜
DRK - □ Key selector switch
Shock resistance Approx. 50 G (500 )
DRE - □ Emergency stop switch
Ambient temperature -10 ~ 50 ℃
DRA - □ Illuminated emergency stop switch
A Ø22 Flat Ambient humidity 45 ~ 85 % RH
Chrome plated guard
R Ø16 Protrusion Opening and closing frequency Up to 30 times/min
Control part K Ø22 Flat
Electrical 200,000 times or more / 1,800 h
shape T Ø16 Protrusion life
Plastic guard Mechanical 1 million times or more / 1,800 h
S Ø16 Square
O Ø16 Rectangular Certification

132
 Control Switches

CR series NEW
New product
Product composition Control switch

Push button switch

Model High-end
Flat Ø30 Flat Ø25Illuminated pushbutton switch
Protrusion Ø30 Protrusion Ø25 Control switch
Model
Flat Ø30 Protrusion Ø30 Protective guard Ø30 Flat Ø25 Protrusion Ø25 Protective guard Ø25
New product
assembly
Indicator light
Rectangular
Appearance indicator light

Appearance Power switch

Main switch

Actuator code CRF-F30 CRF-F25 CRF-P30 CRF-P25

Cam switch
Actuator code CRX-F30 CRX-P30 CRX-G30 CRX-F25 CRX-P25 CRX-G25

Indicator light
Model Limit
switch
Flat Ø30 Flat Ø25

Micro
switch

Appearance
Foot switch
Mono lever
switch

Hoist
Actuator code CRP-30 CRP-25 switch

Selector switch
Model Short lever Long lever
Flat Ø30 Flat Ø25 Flat Ø30 Flat Ø25

Appearance

Actuator code CRS-30 CRS-25 CRSL-30 CRSL-25

Illuminated selector switch
Model
Flat Ø30 Flat Ø25 Flat Ø30 Flat Ø25

외형

Actuator code CRT-30 CRT-25 CRTL-30 CRTL-25

KEY selector switch
Model
Flat Ø30 Flat Ø25

Appearance

Actuator code CRK-30 CRK-25

133
 CONTROL SWITCHES
Emergency stop switch
Model
Flat Ø30 Flat Ø25

Appearance

Actuator code CRE-30M CRE-25M

Appearance

Actuator code CRE-30R CRE-25R

Illuminated emergency stop switch
Model
Flat Ø30 Flat Ø25

Appearance

Actuator code CRA-30M CRA-25M

Appearance

Actuator code CRA-30R CRA-25R

Buzzer
Model
Flat Ø30 Flat Ø25

Appearance

Actuator code CRB-30 CRB-25

Accessories
Emergency protection cover Front protective cover Silicone cover Tightening tool
Model HEG-25 HEG-30 HSC-25P HSC-30P
CR-25WPC CR-30WPC FIX HEAD-CR25 FIX HEAD-CR30 FIX HANDLE
(Protrusion) (Protrusion) (Protrusion) (Protrusion)
Application Model CRE-25, CRA-25 CRE-30, CRA-30 CRF-F25, CRX-F25 CRF-F30, CRX-F30 Ø25 Ø30 Ø25 Ø30 Handle

Appearance

Suffix Code Specification

Model Code Content Contact configuration 1a1b
CRF - □ Push button switch Contact operation Slow-make
CRX - □ Illuminated pushbutton switch Installation panel thickness 1 ~ 6 mm (excluding accessories)
CRP - □ Indicator light 100-240 V a.c. / 4.4 VA or less
Rated voltage /
CRS - □ Selector short lever switch 380 V a.c. / 2.7 VA or less
power consumption
CRSL - □ Selector long lever switch 12-24 V d.c. / 18 mA or less
CRT - □ Illuminated selector switch Allowable operating Mechanical 30 times/min or less
CRTL - □ Illuminated long lever switch frequency Electrical 30 times/min or less
CRK - □ Key selector switch Insulation Resistance 100㏁ or more
CRE - □ Emergency stop switch Withstand voltage 1500 V a.c. 50/60 ㎐ 1 minute
CRA - □ Illuminated emergency stop switch Vibration resistance Malfunction 10-55 ㎐ double amplitude width 3 ㎜
CRB- □ Buzzer Mechanical 500 ㎨ or more
Shock resistance
F30 Ø30 Flat Malfunction 100 ㎨ or more
P30 Ø30 Protrusion Mechanical 10,000 times or more
life
Control part G30 Ø30 Protective guard Electrical 100,000 times or more
shape F25 Ø25 Flat Ambient temperature and humidity -25 ~ 40 ℃, 45 ~ 85 % RH
P25 Ø25 Protrusion Storage temperature -40 ~ 60℃
G25 Ø25 Protective guard Certification

134
 Control Switches

MR series Push button switch New product

Control switch
Model Aluminum guard Plastic guard
Flat Ø30 Flat Ø25 Protrusion Ø22 Flat Ø25 Protrusion Ø22
High-end
Control switch

New product
Appearance assembly
Indicator light
Rectangular
indicator light

Actuator code MRF-A(Ø30) MRF-N(Ø25) MRF-R(Ø22) MRF-K(Ø25) MRF-T(Ø22) Power switch

Main switch
Illuminated pushbutton switch
Model Aluminum guard Plastic guard
Cam switch
Flat Ø30 Flat Ø25 Protrusion Ø22 Flat Ø25 Protrusion Ø22 ON / OFF

Limit
switch
Appearance

Micro
switch

Actuator code MRX-A(Ø30) MRX-N(Ø25) MRX-R(Ø22) MRX-K(Ø25) MRX-T(Ø22) MRX-WM2

Foot switch
Indicator light Mono lever
switch
Model Aluminum guard Plastic guard
Flat Ø30 Flat Ø25 Protrusion Ø22 Flat Ø25 Protrusion Ø22
Hoist
switch

Appearance

Actuator code MRP-A(Ø30) MRP-N(Ø25) MRP-R(Ø22) MRP-K(Ø25) MRP-T(Ø22)

Selector switch
Model Aluminum guard Plastic guard
Flat Ø30 Flat Ø25 Protrusion Ø22 Flat Ø25 Protrusion Ø22

Appearance

Actuator code MRS-A(Ø30) MRS-N(Ø25) MRS-R(Ø22) MRS-K(Ø25) MRS-T(Ø22)

Illuminated selector switch
Model Aluminum guard Plastic guard
Flat Ø30 Flat Ø25 Protrusion Ø22 Flat Ø25 Protrusion Ø22

Appearance

Actuator code MRT-A(Ø30) MRT-N(Ø25) MRT-R(Ø22) MRT-K(Ø25) MRT-T(Ø22)

Appearance

Actuator code MRT-A3(Ø30) MRT-N3(Ø25) MRT-R3(Ø22) MRT-K3(Ø25) MRT-T3(Ø22)

Key selector switch
Model Aluminum guard
Flat Ø30 Flat Ø25 Protrusion Ø22

Appearance

Actuator code MRK-A(Ø30) MRK-N(Ø25) MRK-R(Ø22)

135
 CONTROL SWITCHES
Emergency stop switch
Model Aluminum guard Plastic guard
Flat Ø30 Flat Ø25 Protrusion Ø22 Flat Ø25 Protrusion Ø22

Appearance

Actuator code MRE-AM(Ø30) MRE-NM(Ø25) MRE-RM(Ø22) MRE-KM(Ø25) MRE-TM(Ø22)

Appearance

Actuator code MRE-AR(Ø30) MRE-NR(Ø25) MRE-RR(Ø22) MRE-KR(Ø25) MRE-TR(Ø22)

Illuminated emergency stop switch
Model Aluminum guard Plastic guard
Flat Ø30 Flat Ø25 Protrusion Ø22 Flat Ø25 Protrusion Ø22

Appearance

Actuator code MRA-AM(Ø30) MRA-NM(Ø25) MRA-RM(Ø22) MRA-KM(Ø25) MRA-TM(Ø22)

Appearance

Actuator code MRA-AR(Ø30) MRA-NR(Ø25) MRA-RR(Ø22) MRA-KR(Ø25) MRA-TR(Ø22)

Buzzer
Model Aluminum guard Plastic guard
Flat Ø30 Flat Ø25 Protrusion Ø22 Flat Ø25 Protrusion Ø22

Appearance

Actuator code MRB-A(Ø30) MRB-N(Ø25) MRB-R(Ø22) MRB-K(Ø25) MRB-T(Ø22)

Accessories
Emergency sign nameplate Emergency protection cover Front protective cover Tightening tool
Model HEG-22 HEG-25F HEG-30F HSC-22P HSC-25F HSC-30F FIX FIX
EN-36 EN-26
(Protrusion) (Flat) (Flat) (Protrusion) (Flat) (Flat) HEAD-MR HANDLE
Application MRE-A MRE-R, MRE-T MRE-R, MRE- T, MRE-N, MRE-K, MRF-R, MRF-T, MRF-N, MRF-K,
MRE-A, MRA-A MRF-A, MRX-A Ø22, Ø25, Ø30 Handle
Model MRA-A MRA-R, MRA-T MRA-R, MRA-T MRA-N, MRA-K MRX-R, MRX-T MRX-N, MRX-K

Appearance

Suffix Code Specification

Model Code Content Contact unit MR-CB
Contact configuration 1a1b
MRF - □ Push button switch Contact operation Snap-action
Installation panel thickness 7.0 mm (excluding accessories)
MRX - □ Illuminated pushbutton switch
Mounting nut : 1.96 N・m max,
Tightening torque
MRP - □ Indicator light Terminal bolt : 0.78 N・m max
Operating distance 5 ㎜ ±0.2
MRS - □ Selector switch Mechanical
Recoil time 3 ms or less
Operating part Button : more than 500,000 times,
MRT - □ Illuminated selector switch operation life Selector : more than 200,000 times
MRK - □ Key selector switch Withstand voltage 2,000 V a.c. 50/60 ㎐ 1 minute
Contact contact resistance 50 ㏁ or less (at the time of shipment)
MRE - □ Emergency stop switch Insulation Resistance 100 ㏁ or more 500 V d.c.
Electrical
Rated current 6 A 250 V a.c.
MRA - □ Illuminated emergency stop switch
Minimum load current 5 ㎃ 24 V d.c., 10 ㎃ 11 V d.c.
MRB- □ Buzzer Electrical life More than 200,000 times
100-240 V a.c. (LED capacitor voltage drop type)
A Ø30 flat 380 V a.c. (LED capacitor voltage drop type)
Light source Power supply voltage
N Ø25 flat Aluminum guard 12–24 V a.c. 50/60Hz or 12–24 V d.c.
Control part (LED capacitor voltage drop type)
R Ø22 protrusion Ambient temperature
shape -20 ~ 55 ℃, 35 ~ 85 % RH (Without condention)
and humidity
K Ø25 flat Environmental
Storage temperature -40 ~ 85 ℃
Plastic guard conditions Shock resistance 300 pulse period 11 ms
T Ø22 protrusion
Vibration resistance 100, 10 ㎐-55 ㎐, amplitude 0.75 ㎜ (within 1 ㎳)

136
 Control Switches

AR series
Product composition New product
Control switch

Push button switch Illuminated pushbutton switch Indicator light

Model
Columnar Columnar Columnar ON / OFF AC DC High-end
Control switch

New product
assembly
Indicator light
Rectangular
indicator light
Appearance
Power switch
Main switch

Cam switch
Actuator code ARF-F,B,P,G,H ARF-S ARX-P,G,H ARX-S ARP-A0 ARP-D0
Illuminated selector
Selector switch
Model switch Key selector switch Emergency stop switch Limit
switch
Lever Lever

Micro
switch

Foot switch
Appearance Mono lever
switch

Hoist
switch

Actuator code ARS-S,L ART-2,2R,3 ARK-2,2R,3,3L,3R,3LR ARE-3,4 ARE-4XR

Suffix code Specification

Model Code Content Allowable Mechanical 30 times/minute
operating
frequency Electrical 30 times/minute
ARF - □ Push button switch
Insulation Resistance 100 ㏁ or more
ARX - □ Illuminated pushbutton switch Withstand voltage 2,000 V a.c. 1 minute (between the same pole terminals)
Vibration
ARP - □ Indicator light Malfunction 10-55 ㎐ double amplitude 3 ㎜ (within 1 ㎳)
resistance

ARS - □ Selector switch Shock Mechanical 500 ㎨ or more

resistance Malfunction 100 ㎨ or more
ART - □ Illuminated selector switch
Mechanical 1,000,000 times or more
Life
ARK - □ Key selector switch Electrical 100,000 times or more

ARE - □ Emergency stop switch Power supply 100-240 V a.c. (LED capacitor voltage drop expression)
Light source
voltage 12-24 V a.c./d.c. (LED capacitor voltage drop expression)
ARE - □ Illuminated emergency stop switch
Ambient temperature & humidity -25 ~ 40 ℃, 45 ~ 85 % RH (Without condention)
ARB- □ Buzzer Storage temperature -40 ~ 70℃

Accessories
Emergency sign nameplate Emergency Protection Cover Tightening tool
Model
EN-26 HEG-22(Extended) FIX HEAD-AR FIX HANDLE
Applied model ARE ARE All models Handle

Appearance

137
 COMBINATION DISPLAY LIGHT

CDN series NEW

Specification
Model CDN

Appearance

Power Voltage 24 V a.c. 50/60 Hz or 24 V d.c. 110 V a.c. 220 V a.c.

LED Indication Color Red, green, yellow, white, orange, blue
Insulation resistance 100 ㏁ or more
Voltage withstand 2,000 V a.c. 1 minute
Power consumption 20 mA 0.4 VA 0.4 W 0.5 W
LED Rated Voltage 24 V d.c.
Life 50,000 hours (24 V d.c., 25 °C)
Ambient temperature and humidity -20 ℃ ~ 40 ℃, 45 ~ 85 % RH (Without condention)
Storage temperature -25 ~ 55 ℃

(Note) CDN-S□ (30 X 30 ㎜) / CDN-R□ (30 X 40 ㎜)

Suffix code
Model Code Content
CDN- □ □ -□□ □□ -□□□□□□ Set Indicator
S Square (30×30 ㎜)
Basic model name
R Rectangle(30×40 ㎜)
D2 24 V a.c. 50/60 Hz or 24 V d.c.
Power Voltage A1 110 V a.c.
A2 220 V a.c.
Collective Face Configuration Group 01 1st to 10th
Collective Face Configuration Column 01 Rows 1 to 20
C : COLOR color combination
Lamp color C
R (Red), G (Green), Y (Yellow), O (Orange), A (Blue), W (White)

CR40 series
Specifications
Model CR40

Appearance

Power Voltage 100-240 V a.c. 380 V a.c. 12-24 V a.c./d.c.

Power consumption/current 4.4 VA or less 2.7 VA or less 18 ㎃ or less
Display color Red, green, yellow, blue, white
Light source life 100,000 h

Suffix code
Model Code Content
CR40 □ □ LED light source rectangular indicator
A0 100-240 V a.c.
LED (Condenser voltage drop type)
Power Voltage A3 380 V a.c.
D0 12-24 V a.c./d.c. LED (Resistance voltage drop type)
Display color R Red, green, yellow, blue, white

138
 Power Switches

HY-500 series
Product composition New product
Control switch

Model Rated capacity Use

High-end
Control switch

Electromotor
HY-510 3P 250 V a.c. 15A New product
3 phase power supply ON, OFF assembly
Indicator light
Exposed Rectangular
indicator light
HY-512, HY-512S
2P 250 V a.c. 15A 1 Phase Electromotor ON, OFF
(Switch part for the lamp) Power switch
Main switch

HY-513, HY-513S Electromotor for

3P 250 V a.c. 15A
(Switch part for the lamp) 3 phase power supply ON, OFF
Cam switch
Recessed Electromotor for
HY-514 3P 250 V a.c. 15A
3 phase power supply ON, OFF
Limit
switch
Electromotor for 3 phase power supply
Direct/reverse revolution for stop
HY-516 3P 250 V a.c. 15A
1 phase, 3 phase, Micro

Exposed right/left for revolution switch

Foot switch
Mono lever
switch
Electromotor 1 phase,
HY-517 3P 250 V a.c. 15A
3 phase ON, OFF
Hoist
Exposed switch

BE series
● Steel case (BE)
Model Rated capacity Contact terminal Marker Case material

ON (Black) Cold workable

BE 230 3P 440 V a.c. 30A M5
OFF (Red) steel plate

Steel case exposed

● Waterproof type (BEW, BEWT)

Model Rated capacity Contact terminal Marker Case material

BEW 215 3P 440 V a.c. 15A M4

BEW 230 3P 440 V a.c. 30A M5

Waterproof
ON (Black)
OFF (Red)

BEWT 215 3P 440 V a.c. 15A M4

Flame retardant
ABS resin
Advanced waterproof type

FOR. (Black)
BEWT 315 3P 440 V a.c. 15A M4 STOP (Red)
REV. (Black)

Advanced waterproof type

139
 MAIN / CAM SWITCHES

MAS series
Specifications Suffix code
Rated insulation Rated conduction Model Code Content
Appearance Suffix code
voltage current MAS- □ □ Main switch

MAS-025-A/B 25 A 025 For AC25 A

Rated current 063 For AC63 A
125 For AC125 A
MAS-063-A/B 690 V a.c. 63 A
For emergency stop
A
(yellow guard, red handle)
Color classification
MAS-125-A/B 125 A Basic type
B
(white guard, black handle)

SQ4 series
Specifications
Model SQ4

Appearance

Rated insulation voltage (Ui) 690 V a.c.

Impulse withstand voltage (Uimp) 2,500 V a.c.
Rated conduction current (Ith) 16 A
Rated conduction current (Ie) 16A-24 V a.c. / 8A-48 V a.c. / 5A-110 V a.c. / 3A-220 V a.c. / 1.8A-380 V a.c.
Rated operating voltage (Ue) 480 V a.c.
Mechanical life 300,000 Times
Electrical life AC: 200,000 Times, DC: 100,000 Times
Ambient temperature & humidity -25 ~ 55 ℃, less than 90% RH (however, there should be no condensation)
Altitude 2,000 m or less
Body NY66 GF15 % flame retardant grade
Cam ACETAL
Contact AgNi
Material for
Terminal BRASS
each part
Bolt Iron (galvanized)
Spring Stainless (STS)
Handle PC flame retardant grade

Suffix code
Model Code Content
SQ4- □ □ □- □ □ □ □ Cam switch
install F 4-Hole panel mounting
Nameplate frame S Square nameplate frame (48 X 48 ㎜)
H H-type handle (general industrial)
Handle
R R-type handle (voltmeter, ammeter switch)
2 2nd stage selection
3 3nd stage selection
4 4nd stage selection
Selected number of stages
5 5nd stage selection
6 6nd stage selection
7 7nd stage selection
1 1 Rows
2 2 Rows
3 3 Rows
Number of contact units stacked
4 4 Rows
5 5 Rows
6 6 Rows
Standard circuit diagram serial number 0 1 01 ~ 99
※ For standard products, refer to the individual model code. (Voltmeter, ammeter switch, etc.)

140
 Cam Switches

HY-SQ5/255/305/MRK series
Specifications New product
Control switch

Model Square type Round type Handle locking type Bottom (C) type Square key type
High-end
Control switch

New product
assembly
Appearance Indicator light
Rectangular
indicator light

Power switch
Main switch
Rated insulation voltage 600 V
Rated current 10 A, 20 A
Cam switch
Contact structure 2 Cut-off slow-make 1- stage 2 contacts, max. 6 positions (max. 3 positions for the momentary version)
Operation method Each position fixed, spring return type
Selection angle 30Ì, 45Ì,60Ì,90Ì Limit
switch
Contact Positions 2 positions ~ 12 positions , 2 positions ~ 4 positions
rating Insulation resistance 100 ㏁ (500 V d.c.)
Micro
Dielectric strength 2,500 V a.c. for 1 min switch

Mechanical Min. 500 thousand operations

Life Foot switch
Electrical ● Min. 100 thousand operations, ● MRK : Min. 200 thousand operations Mono lever
switch
Ambient temperature -20 ~ 50 ℃
Degree of protection ● 305, 255 (Round type) : IP65 (IEC 60529), ● SQ5 (Square type) : IP40 (IEC 60529)
Hoist
Body Heat-resistant Polycarbonate (PC) switch

Cam Acetal
Contacts Ag + Ni
Part
Terminals Brass
materials
Bolt Swrm
Springs Stainless Steel
Handle Phenol Resin

Suffix code
Model Code Content
□ □ □ □ □ □ Cam switch
HY-SQ5 Square type cam switch
Appearance
HY-255 Ø25 type cam switch
HY-305 Ø30type cam switch
S Square type (standard type)
Contact type
C Round type (for HY-SQ5)
H Standard type (standard industrial machine)
Handle type R Switch board type (A/S, V/S)
P Control switch type (C/S)
2 2 positions
3 3 positions
Position selection 4 4 positions
5 5 positions
6 6 positions
1 1 rows
2 2 rows
Number of contact unit 3 3 rows
(Number of rows) 4 4 rows
5 5 rows
6 6 rows
Standard circuit diagram serial number 0 1 01 ~ 99
※ A/S : ammeter converting switch, V/S: voltmeter converting switch
※ Possible to manufacture 20 A, 250 V product only within the square type contact structure

Suffix code
Model Code Content

HY-MRK 4 2 0 2 Key cam switch

Contact formation Labeled the serial number (refer to the standard circuit diagram)

141
 LIMIT SWITCHES

HY-M900/LM900 series Ø50 Fork

Roller plunger Top ball plunger Variable roller Variable rod wire Roller lever Coil spring
roller roller
Model lever Lever
HY-M902 HY-LM902 HY-M903 HY-LM903 HY-M904 HY-LM904 HY-M907 HY-LM907 HY-M908 HY-LM908 HY-M909 HY-LM909 HY-M908R HY-M908L

Appearance

Operation speed 0.1 - 1 ㎧

Opening Mechanical 120 times/minute
and closing
Electrical 20 times/minute
frequency
Insulation resistance 100 ㏁ or more (500 V d.c.)
Dielectric strength ● 1000 V a.c. 50/60 ㎐ for 1 min (between charging part), ● 1500 V a.c. 50/60 ㎐ for 1 min (between discharging part)
Contact resistance Max. 100 ㏁ (initial)
Vibration Malfunction 10 - 55 ㎐ double amplitude width 1.5 ㎜
Mechanical 1,000 ㎨ or more (100G or more)
Shock
Malfunction 300㎨ or more (30G or more)
Mechanical More than 1 million times
Life
Electrical More than 300,000 times

● Rating
Non-inductive load (A) Inductive load (A)
Rated voltage(V) Resistive load Lamp Inductive load Electric motor load
NC NO NC NO NC NO NC NO
125 15 3 1.5 10 3 1.5
AC 250 10 2 1 6 2 1
480 3 1.5 0.8 2 1.5 0.75
8 15 6 3 10 -
14 15 6 3 10 -
DC 30 6 4 3 5 -
125 0.4 0.2 0.2 0.05 -
250 0.2 0.1 0.1 0.03 -

HY-L800 series Cross roller

Roller Plunger Roller Adjustable Rubber Roller Adjustable Rod
Plunger type Top Plunger Roller Lever Coil spring
Model [horizontal] Lever Adjustable Lever Lever
[vertical]
HY-L802 HY-L802C HY-L803 HY-L804 HY-L804RE HY-L807 HY-L808 HY-L809

Appearance

Mechanical 120 times/minute

Frenqucy
Electrical 30 times/minute
Insulation resistance 100 ㏁ 이상 ( 500 V d.c.)
Dielectric strength ● Between terminals: 1,500 V a.c. 50/60 ㎐ 1 minute, ● Between non-charging metal parts: 2,000 V a.c. 50/60 ㎐ 1 minute
Contact resistance 25 ㏁ or less (initial value), 100 ㏁ or less (after test)
Vibration Malfunction 10-55 ㎐ or more, double amplitude 1.5 ㎜
Mechanical 300㎨ or more (30G or more)
Shock
Malfunction 100㎨ or more (10G or more)
Mechanical Over 1 million times (open/close frequency 120 times/min)
Life
Electrical 100,000 times or more (opening and closing frequency 20 times/min at rated load)
Ambient temperature & humidity -10 ~ 70 ℃, 95% RH or less (20 ℃) (No condensation)

● Rating
LOAD
Resistive load (cosф≒1) Inductive load (cosф≒0.4)
Rated voltage
125 V a.c. 5A 3A
250 V a.c. 5A 2A
125 V d.c. 0.4 A 0.1 A

142
 Limit Switches

HY-LS800 series Roller Adjustable Adjustable Rod New product

Roller Plunger Push Plunger Roller Arm Rubber Roller Lever Roller Lever
Model Lever Lever Control switch

HY-LS802N HY-LS803N HY-LS803RN HY-LS804RE HY-LS804N HY-LS807N HY-LS808N

High-end
Control switch

Appearance
New product
assembly
Indicator light
Rectangular
Mechanical 120 times/minute indicator light
Frequency
Electrical 30 times/minute
Power switch
Insulation resistance 100 ㏁ or more (500 V d.c.) Main switch
Contact resistance 25 ㏁ or less (initial value)
Dielectric resistance ● 1,000 V a.c. 50/60 Hz for 1 minute, ● 2,000 V a.c. 50/60 ㎐ 1 minute
Cam switch
Vibration Malfunction 10-55 ㎐ double amplitude 1.5 ㎜
Mechanical 1000 ㎨ or more (100 G or more)
Shock
Malfunction 300 ㎨ or more (30 G or more) Limit
switch
Mechanical More than 1 million times
LIfe
Electrical 100,000 times or more
Micro
Ambient temperature and humidity -10 ~ 70 ℃, 95 % RH or less (20 ℃) (No condensation) switch

● Ratings
Foot switch
Non-inductive load (A) Inductive load (A) Mono lever
switch
Rated voltage (V) Resistive load Lamp Inductive load Electric motor load
NO NC NO NC NO NC
Hoist
125 6 2 6 3 switch
AC
250 6 1.5 6 1.5
8 6 4 6 4
14 6 4 6 4
DC 30 4 2.5 4 2.5
125 0.4 0.1 0.4 0.1
250 0.2 0.05 0.2 0.05

ZCN-500 series Hinge roller Hinge roller Hinge short Hinge long Vertical roller Horizontal roller Resin road
Plunger Hinge lever
Model short lever long lever lever lever plunger plunger spring
ZCN-P501O ZCN-R504A ZCN-R504C ZCN-L507A ZCN-L507C ZCN-L507D ZCN-PR508V ZCN-PR508H ZCN-L509

Appearance

Operation speed 0.1 ㎜ - 0.5 ㎧

Mechanical 120 times/minute
Frequency
Electrical 20 times/minute
Insulation resistance 100 MΩ or more (500 V d.c.)
Contact resistance 25 ㏁ or less (initial value), 100 ㏁ or less
Dielectric strength ● Between charging part : 1000 V a.c. 50/60 ㎐ for 1 min, ● between discharging part : 1500 V a.c. 50/60 ㎐ for 1 min
Vibration Malfunction 10-55 ㎐ double amplitude 1.5 ㎜
Mechanical 1000 ㎨ or more (100 G or more)
Shock
Malfunction 300 ㎨ or more (30 G or more)
Mechanical More than 1 million times
LIfe
Electrical More than 300,000 times
Ambient temperature and humidity -10 ~ 80 ℃ 25 ~ 95 % RH (No condensation)

● Ratings
Non-inductive load(A) Inductive load ((A)
Rated voltage(V) Resistive load Inductive load Electric motor load
NC NO NC NO NC NO
125 15 10 3 1.5
AC 250 10 6 2 1
600 3 2 1.5 0.75
8 15 10 - -
14 15 10 - -
DC 30 6 5 - -
125 0.4 0.05 - -
250 0.2 0.03 - -

143
 MICRO SWITCHES

HY-700 series
Specifications
Spring single Spring stander Hinge roller
Panel mounting Pin push button
Model push button push button single lever
HY-P701A (Z4G1P05B) HY-P701B (Z4G1P09B) HY-P701C (Z4G1P01B) HY-P701D (Z4G1P03B) HY-R704A (Z4G1L07B)

Appearance

Hinge roller 2 positions

Hinge roller lever Single position lever Middle lever type
Model middle lever roller lever
HY-R704B HY-R704C (Z4G1L03B) HY-R704-2W HY-L707A HY-L707B

Appearance

Roller panel mounting Roller panel mounting

Hinge lever Special lever Hinge special lever
Model (Vertical) (horizontal)
HY-L707C (Z4G1L01B) HY-L707D HY-L707S HY-PR708A HY-PR708B (Z4G1P07B)

Appearance

Operation speed 0.1 ㎜ - 1 ㎧

Allowable Mechanical 50 - 300 times/minute
operating
frequency Electrical 20 times/minute
Insulation resistance 100 ㏁ or more (500 V d.c.)
Contact resistance ● Max. 50 ㏁ (initial), ● max. 2 Ω (after testing)
Vibration resistance 10 - 55 ㎐ double amplitude 0.75㎜
Shock Mechanical 1,000 ㎨ or more (100G or more)
resistance Malfunction 300㎨ or more (30G or more)
Dielectric strength 2,000 V a.c. 50/60 ㎐ 1 minute (each terminal and non-charging metal part)
Mechanical Over 1 million times (open/close frequency 120 times/min)
Life
Electrical 300,000 times or more (opening and closing frequency 20 times/min at rated load)
Net weight(g) 31.5 ~ 59.5 g
Rated current (Ie) 10 A 250 V a.c. (Resistive load)

144
 Foot / Mono lever Switches

HY-100 series
Specifications New product
Control switch
Model HY-101 HY-102N
High-end
Control switch

Appearance New product

assembly
Indicator light
Rectangular
indicator light

Rated voltage 250 V a.c., 10 A 250 V a.c., 10 A

Power switch
Internal switch SMV-61A-07H SMV-61A-07H Main switch

Material of case Plastic Aluminum

Cam switch
Model HY-103N HY-104N HY-105N

Limit
switch
Appearance
Micro
switch

Rated voltage 250 V a.c., 10 A Foot switch

Mono lever
Internal switch HY-P701B HY-P701D HY-P701B switch
Material of case Aluminum Aluminum green (Hammer) stamp
Hoist
Suffix code switch

Model Code Content

HY-10 □ Foot Switch
1 Plastic foot switch
2N Aluminum foot switch
Appearance 3N Middle size aluminum foot switch
4 Large size aluminum foot switch
5 Large size aluminum foot switch

LEL/LES series
Specifications
Model LEL (Long lever) LES (Short lever)

Appearance

Rated insulation voltage 600 V

Rated current 3 A 250 V a.c.
Contact structure 2 Cut-off slow-make 1- stage 2 contacts, max. 4 positions
Insulation resistance 100 ㏁ (500 V d.c.)
Dielectric strength 2,500 V a.c., for 1 min (between charging part and discharging part)
Contact resistance 20 ㏁ or less (at the time of shipment)
Life ● Mechanical : Min. 500 thousand operations, ● Electrical : Min. 100 thousand operations
Ambient temperature & humidity -20 ~ 50 ℃, 45 ~ 85 % RH (without condensation)

Suffix code
Model Code Content
LE □ □ □ Mono Lever Switch
L Long lever
Lever selection
S Short lever
01 1 st step selection
02 2 st step selection
Stage selection
03 3 st step selection
04 4 st step selection
1 Auto returning
Returning type
2 Manual returning
※ In the case of the combination return type, it is an order product, so please enter the return operation for each direction. The basic contact configuration for
each direction of the product is 1a.

145
 HOIST SWITCHES

HY-P series
Specifications
NEW

HY-P1024BB HY-P1026BBB HY-P1028BBBB

HY-P1022B HY-P1026SBBB HY-P1029SBBB
HY-P1022SB HY-P1024SBB HY-P1028SBBBB
Model 4 button/2 button 6 button/4 button 6 button/push lock 8 button/push lock 6 button/push lock
2 button +Push lock turn +Push lock turn turn reset turn reset turn reset
reset reset +1 (switch) +1 (switch) + 3 (switch)
Degree of protection IP65 (IEC 60529)
Materials ・ Case High impact ABS resin
Colors Contacts AgSnO2
Insulation resistance 100 ㏁ (500 V d.c.)
Dielectric strength 2,000 V a.c. 1 minute (between charging and non-charging parts)
Ambient temperature & humidity -10 ~ 45 ℃, 45 ~ 85 % RH (without condensation)

Suffix code
Model Code Content
HY- □ □ □ □ □ □ □ □ □ Hoist switch
P1022 X X X X X X 2 buttons
P1024 X X X X X 4 buttons
Number of
P1026 X X X 6 buttons
buttons
P1028 X X 8 buttons
P1029 X 9 buttons
None
Emergency switch S 1b Basic specifications
S1 1a1b Contacts on-demand
None
P P P MRP-RA0 MR control switches
H H H MRF-RM1 * Arrangement order and type may vary according to order
specifications.
M M M MRS-R2A1
* There are 6 types of nameplates when selecting a control switch.
Y Y Y MRS-R3A2 (POWER, MAIN-AUX, OFF ON, HORN, LIGHT, A A+B B)
K K K MRK-R2A1 * If you do not select it, it will be shipped without a nameplate.

A A A A HY-PA 1a
B B B B HY-PB 1a-1a
Contacts and
C C C C HY-PC 1a-1a Default
control switches
D D D D HY-PD 2a-2a
E E E E HY-PE 2a-2a
A1 A1 A1 A1 HY-PA1 1a1b
B1 B1 B1 B1 HY-PB1 1a1b-1a1b
C1 C1 C1 C1 HY-PC1 1a1b-1a1b
Order made
E1 E1 E1 E1 HY-PE1 2a2b-2a2b
F F F F HY-PF 2a
F1 F1 F1 F1 HY-PF1 2a2b
Toggle switch (2rd 3rd)
Toggle switch and volume required by consumers, etc.
Other Volume 1K,2K,3K,Etc
Separate order available for mounting other options
Ø 8~16 controller switches

※ Except where X is indicated in the model configuration

External dimensions
Model Appearance External dimensions Model Appearance External dimensions

HY-P1022S
HY-P1022 2 button


2 button +Push lock turn




reset


 

 
  



146
 Hoist Switches
External dimensions
Model Appearance External dimensions Model Appearance External dimensions

New product
Control switch

High-end
Control switch
HY-P1024S


HY-P1024 4 button New product


4 button +Push lock turn


assembly
Indicator light
reset


Rectangular
indicator light


Power switch
Main switch

 
  


Cam switch

Limit
switch

Micro
switch

Foot switch
HY-1026S Mono lever


6 button + switch
HY-1026
1 switch 
6 button


+Push lock turn Hoist


reset switch






 
   

HY-P1028S


8 button +


HY-P1028  1 switch
8 button


+Push lock turn




reset




  
  

Model Appearance External dimensions



HY-P1029S 
6 button+ 

3 switch
+Push lock turn
reset





147
 HOIST SWITCHES
Contact units
Model Appearance Contact configuration Information

HY-PA(1a) HY-PA1(1a1b)

For on/off operation power, etc.

HY-PA To close and hold, press the top button (ON) .
To open, press the bottom button (OFF).

HY-PB(1a-1a) HY-PB1(1a1b-1a1b)

For general circuits (up/down/east/west, etc.)

It does not support the simultaneous operation
HY-PB
of the 2 buttons with the seesaw-type
mechanical interlock.

HY-PC(1a-1a) HY-PC1(1a1b-1a1b)

For general circuits.

It supports the simultaneous operation of the
HY-PC
2 buttons because there is no mechanical
interlock.

HY-PD(2a-2a)

For speed control and 2-circuit control

The contacts are divided into two stages.
HY-PD It does not support the simultaneous operation
of the 2 buttons with the seesaw-type
mechanical interlock.

HY-PE(2a-2a) HY-PE1(2a2b-2a2b)

For general circuits.

2a-2a / 2a2b-2a2b contacts.
HY-PE It does not support the simultaneous operation
of the 2 buttons with the seesaw-type
mechanical interlock.

HY-PF(2a) HY-PF1(2a2b) For general circuits.

You can freely assemble and configure it
HY-PF 6 4 7 61 4 according to the independent 1 contact switch.
Up to 2a2b contacts
5 3 8 52 3 (1a, 1b, 1a1b, 2a1b, 2a2b)

Contact units (Push lock turn reset switch)

Model Appearance Contact configuration Explanation

HY-PS
1
HY-PS1
1 4
When the button is pressed, the pressed state is maintained.
HY-PS Return turns in the direction of the printed arrow.
2 2 3 (Moving part + contact)

Accessories
Model Appearance Explanation

PS-3R(HOIST) Switch on operation part (excluding contact)

148
 Sign towers

STS series
Specifications Sign Tower

Model STS 040 STS 060 STS 080

Modular
Sign Tower

New product
Panel lamp

Appearance Wall mounting

Indicator light

Rotating
beacon

Circumference size Ø 40 Ø 60 Ø 80 Warning light

● Plastic round bracket ● Plastic round bracket ● Plastic round bracket

Bracket selection ● L type bracket ● L type bracket ● L type bracket
● Elbow bracket (option) ● Elbow bracket (option) ● Elbow bracket (option)

Rated voltage 24 V a.c. 50/60 Hz or 24 V d.c. (Order specification when the power supply voltage is 12 V)
Number of stacked layers 1, 2, 3, 4, 5 stacks
Color Red, Yellow, Green, Blue, White
Power Consumption Max. approx. 6 W for 5 stacks (0.9 W per each stack)
Body material Heat resistant ABS

Suffix code
Model Code Content
STS □ -□ □ □ Sign Tower With Continuous Light
040 Ø 40 cylinder type
Diameter size 060 Ø 60 cylinder type
080 Ø 80 cylinder type
C51 24 V a.c. 50/60 Hz or 24 V d.c.(dual usage)
Power voltage
D41 12 V a.c. 50/60 Hz or 12 V d.c.(dual usage)
1 1 stack (red)
2 2 stack (red, green)
Number of stacked layers 3 3 stack (red, yellow, green)
4 4 stack (red, yellow, green, blue)
5 5 stack (red, yellow, green, blue, white)

M PIPE connection type plastic base (MP-40, MP-60, MP-80)

Bracket selection

L L-shaped bracket

Optional Plastic elbowbracket (EPM-18, EPM-25)

※ The power supply voltage is 12 V a.c. 50/60 Hz or 12 V d.c. If it is, the order specification

149
 SIGN TOWERS

STL series
Specifications
Model STL 025 STL 040 STL 060 STL 080

Appearance

Circumference size Ø 25 Ø 40 Ø 60 Ø 80
Function Continuous light only ● A : Continuous light, ● F : Continuous light, Flashing light, Buzzer
Rated voltage 24 V d.c. 24 V a.c. 50/60 Hz or 24 V d.c., 100-240 V a.c. 50/60 ㎐
Number of stacked layers 1, 2, 3, 4, 5 stacks
● Direct installation (bolt fixed installation) ● Plastic round pedestal
● L-shaped pedestal
Bracket selection ● L-shaped bracket, ● STM-84 (option)
(ST-AG: sold separately)
● STM-105 (option) ● Elbow type bracket (EPM) (option)
Color Red, Yellow, Green, Blue, White
About 4 W or less (Based on 5
Power Consumption Max. approx. 8 W for 5 stacks (1.2 W per each lamp)
stages, 0.6 W for each stage)
Buzzer size - 75 dB ( 1 m ) 85 dB ( 1 m )

Suffix code (STL025)

Model Code Content
STL □ -□ □ □ Sign tower (LED light source)
Diameter size 025 Ø25 cylinder type
Power voltage D51 24 V d.c. (LED light source)
※ Color of modules can be changed at customer’s request
1 1 stack (red)
2 2 stack (red, green) ※ L type bracket sold separately
Module colors 3 3 stack (red, yellow, green)
4 4 stack (red, yellow, green, blue)
5 5 stack (red, yellow, green, blue, white)
N NPN (Common Anode)
polarity
P PNP (Common Cathode)

Suffix code (STL040, 060, 080)

Model Code Content
STL □- □ □ □ □ Sign tower (LED light source)
040 Ø 40 cylinder type
Diameter size 060 Ø 60 cylinder type
080 Ø 80 cylinder type
A Continuous light only
Function
F Continuous light, flashing light and buzzer (selected by the external signal)
C51 24 V a.c. 50/60 Hz or 24 V d.c. (dual usage)
Power voltage
A11 100-240 V a.c. 50/60 ㎐
1 1 stack (red)
2 2 stack (red, green)
Module colors 3 3 stack (red, yellow, green)
4 4 stack (red, yellow green, blue)
5 5 stack (red, yellow, green, blue, white)
D Direct installation (bolt fixing installation)

L L type bracket (standard)

Bracket selection

M PIPE Attachable plastic bracket (MP-40, MP-60, MP-80)

Optional bracket (STM)

Optional
Plastic elbow support (EPM-18, EPM-25)

※ Composition of stacking modules: Upper side (1st stack) to the lower side.

150
 Sign towers

HY-TN series
Specifications Sign Tower

Stage Model Voltage Consumption Bulb Stage Model Voltage Consumption Bulb Flashing
power power
Modular
Sign Tower
1 1

New product
HY-TN-24-1 24 V d.c. 0.21 A HY-TWBN-24-1 24 V d.c. 0.21 A Panel lamp
5W 5W
HY-TN-220-1 220 V a.c. 0.04 A HY-TWBN-220-1 220 V a.c. 0.04 A
Wall mounting
Indicator light

2 2 Rotating
beacon

HY-TN-24-2 24 V d.c. 0.42 A HY-TWBN-24-2 24 V d.c. 0.42 A

5W 5W Warning light
HY-TN-220-2 220 V a.c. 0.08 A HY-TWBN-220-2 220 V a.c. 0.08 A

3 3

HY-TN-24-3 24 V d.c. 0.63 A HY-TWBN-24-3 24 V d.c. 0.63 A

5W 5W 60 times/
HY-TN-220-3 220 V a.c. 0.11 A HY-TWBN-220-3 220 V a.c. 0.11 A
1 minute

4 4

HY-TN-24-4 24 V d.c. 0.84 A HY-TWBN-24-4 24 V d.c. 0.84 A

5W 5W
HY-TN-220-4 220 V a.c. 0.14 A HY-TWBN-220-4 220 V a.c. 0.14 A

5 5

HY-TN-24-5 24 V d.c. 1.05 A HY-TWBN-24-5 24 V d.c. 1.05 A

5W 5W
HY-TN-220-5 220 V a.c. 0.17 A HY-TWBN-220-5 220 V a.c. 0.17 A

Suffix code
Model Code Content
HY- □ □ □ □ HY-TN Series Sign Tower
TN Continuous light only
Function Bulb type
TWBN Continuous light, flashing light, buzzer
24 24 V d.c.
Power voltage
220 220 V a.c.
1 1 stack (red)
2 2 stack (red, green)
Stacking modules 3 3 stack (red, yellow, green)
4 4 stack (red, yellow, green, blue)
5 5 stack (red, yellow, green, blue, white)

Supporter selection No indication (L type bracket standard)

ST-011 (Plastic bracket installation)

Accessories MP-60 (Plastic bracket installation (Bar type))

EPM (Plastic elbow type bracket)

151
 PANEL LAMP

STE060 series
Specifications
● Base unit specifications
Model STE060-BAD51 STE060-BFD51 STE060-BAA11 STE060-BFA11 Dimension
Power voltage 24 V d.c. 100-240 V a.c. 50/60 ㎐
Lighting, Flickering, Lighting, Flickering,
Function Lighting only Lighting only
Buzzer (External signal) Buzzer (External signal)
Flickering time - 60 times / minute - 60 times / minute
Buzzer sound types - A single melody / beeping - A single melody / beeping
Size of buzzer sound - 85 ㏈ (1 m) - 85 ㏈ (1 m)
Power Consumption - 1.2 W - 1.2 W
Ambient temperature & humidity -5 ℃ ~ 50 ℃, 35 ~ 85 % RH (without condensation) DC Type AC Type

Weight (g) 76 g 96 g 160 g 178 g

● LED unit specifications

Model STE060-LR STE060-LY STE060-LG STE060-LB STE060-LW

Dimension

Power voltage 24 V d.c.

Power Consumption 1.2 W
Light source LED
Emission angle 360Ì
Ambient temperature & humidity -5 ℃ ~ 50 ℃, 35 ~ 85 % RH (without condensation)
Weight (g) 43 g

Suffix code
Model Code Content
STE060 - □ □ □ □ Ø60 LED Light Sign Tower
A Lighting only
Function
F Lighting, Flickering, Buzzer (External signal)
D51 24 V d.c.
Power voltage
A11 100-240 V a.c. 50/60 ㎐
1 1 stack (red)
2 2 stacks (red, Green)
Stacking modules 3 3 stacks (red, Yellow, Green)
4 4 stacks (red, Yellow, Green, Blue)
5 5 stacks (red, Yellow, Green, Blue, White)

L L type bracket (Standard type)

E Elbow type supporter (EPM-18)

Supporter selection

M Plastic supporter (MP-60)

S Plastic supporter (ST-011)

※ The color was arranged from top to bottom in following order, red, Yellow, Green, Blue, and White. There are two types of functions which are lightening only / Lightening, Flickering & Buzzer.

Base unit suffix code LED unit suffix code

Model Code Content Model Code Content
STE060 - □ □ □ STE060 Sign Tower Base Unit STE060 - □ □ STE060 Sign Tower LED Unit

Classification L LED unit

Classification B Base unit
R Red unit
A Lighting only
Function Y Yellow unit
F Lighting, Flickering, Buzzer (external signal)
Unit G Green unit
D51 24 V d.c.
B Blue unit
Power voltage
A11 100-240 V a.c. 50/60 ㎐ W White unit

152
 Panel Lamp

STE025 series
Specifications Suffix code Sign Tower

Model Code Content

Functions Continuous light
STE025 - □ □ Ø 25 LED Modular Sign Tower
Modular
Power voltage 24 V d.c. Power voltage D51 24 V d.c. Sign Tower

1 1 stack (red)
Body material / color ABS / Chrome plated & ivory New product
Number of stacks 2 2 stacks (red, green)
Panel lamp
Lens colors Red, green, yellow 3 3 stacks (red, yellow, green)

Diameter Ø 25 S Chrome plated Wall mounting

Indicator light
Body color ※ L type bracket sold
Max. number of stacks 3 Stacks N Ivory separately
Rotating

HL series
beacon

NEW Warning light

Specifications
Model HL-100 HL-200 HL-300

Appearance

Optical characteristic specification

Lens color Transparency Transparency Transparency
Lighting color (default) Daylight
Color temperature (default) 6,000 ~ 7,000 K
Total luminous AC 509 lm 1044 lm 1063 lm
flux DC -
Illuminance AC 205 lux 318 lux 368 lux
(at 1m) DC -
Light efficiency 102 lm / W 109 lm/W 110 lm/W
General specification
Model HL-100 HL-200 HL-300
LED model used LG Innotek G3 series (LEMWS59R80FZ) LM80 certification
Features of the LED chip used Zener diode is built into the internal circuit of the LED chip. ESD durability is strong through the protection circuit.
Product life (based on LED) More than 50,000 hours
AC 110-220 V a.c.
Rated voltage
DC 12-24 V d.c.
Frequency 50/60 Hz
Operating voltage range 100-240 V a.c.
-
Current consumption (A)
0.023 0.046 0.046
-
Power Consumption
5W 10 W 10 W
Withstand voltage AC : 3,000 V a.c., 60 Hz, 1 minute
Color rendering 88 87 88
Responsibility
Test Items Exam conditions Result
Withstand voltage AC : 3,000 V a.c., 60 Hz, 1 minute Clear
Operating temperature -20 ℃ ~ +60 ℃ Clear
ON/OFF repeated test Turns off and repeats 1,000 times every 3 seconds Clear
Aging Test Operates over 96 hours with rated input Clear
Acquisition standard
Weight (g) 10.6 13 15

Suffix code
Model Code Content
HL □ □ □ -□ Universal panel lamp
1 0 0 5W
Size and output 2 0 0 10 W
3 0 0 10 W
A 110-220 V a.c.
Input power method
D 12-24 V d.c.

153
 WALL MOUNTED LIGHTS

WME series
Specifications
Model WME

Appearance

Function ● A : Lit indication, ● F : Lit, blinking, buzzer (selected by external signal)

Color (body) ● B : Beige body ● C : Chrome plated body
Rated voltage 24 V a.c. 50/60Hz or 24 V d.c. (Order specification when the power supply voltage is 12 V)
Number of stacked layers 3-stage
Power Consumption 2.1 W or less
Buzzer 2 Types of tones (single/intermittent), approx. 80 dB (1 m)

Suffix code
Model Code Content
WME- □ □ □ Wall Mounted Light
B Beige color body
Appearance
C Chrome gold plating body
A Continuous light indication
Function
F Continuous light indication, flashing light indication, buzzer (selected by the external signal)
C51 24 V a.c. 50/60 Hz or 24 V d.c.
Power voltage
C41 12 V a.c. 50/60 Hz or 12 V d.c. C41 ※ order-made

WMS series
Specifications
Model WMS

Appearance

Function ● A : Continuous light, ● F : Continuous light, Flashing light, Buzzer

Lens color Red, Yellow, Green, Blue, White
Rated voltage 24 V a.c. 50/60 Hz or 24 V d.c. Common (Standard specification) (Order specification when the power supply voltage is 12 V)
Number of tiers 1, 2, 3, 4, 5 tiers
Power Consumption 0.5 W (lamp/1 stage), 3.2 W or less (including 5-stage buzzer)
Buzzer 2 types of tones (single/intermittent), 70 dB (1 m)

Suffix code
Model Code Content
WMS- □ □ □ Wall Mounted Light
A Only for continuous light
Appearance
F Continuous light, flashing light, buzzer (selected by the external signal)
C51 24 V a.c. 50/60Hz or 24 V d.c.
Function
C41 12 V a .c. 50/60 Hz or 12 V d.c. Common ※ “C41” is an order specification
1 1 stack (red)
2 2 stack (red, Green)
Power voltage 3 3 stack (red, Yellow, Green)
4 4 stack (red, Yellow, Green, Blue)
5 5 stack (red, Yellow, Green, Blue, White)

154
 Turn Lights

T series NEW
Specifications Sign Tower

T060 / T084 T060 / T084

Model T060 / T084 T060 / T084 T060 / T084 / T100 T060 / T084 / T100
T100 / T150 T100 / T150 Modular
Sign Tower

New product
Panel lamp

Wall mounting
Appearance Indicator light

Rotating
beacon

T060 T084 T100 T150

Warning light
Round cap supporter Square cap supporter Square cap direct Round cap direct Square cap direct Round cap direct
Appearance
installation installation installation installation installation installation

Functions Rotating continuous light Rotating continuous light, buzzers

● 12 V d.c. : 0.09 A, ● 24 V d.c. : 0.07 A,
Power voltage ● 12 V d.c. : 0.08 A, ● 24 V d.c. : 0.06 A, ● 110 - 220 V a.c. : 0.03 A
● 110 - 220 V a.c. : 0.04 A
Rotating cycle 180 ± 15% times / 1 minute

Buzzer volume - Approx. 80 dB

Cap materials Polycarbonate (PC) resin

Body ABS resin

Cap colors Red, yellow, green, blue

Degree of protection IP54

Suffix code
Model Code Content
T □- □ □ □ □- □ Revolving Warning Light

060 Ø 60

084 Ø 84
Appearance
100 Ø 100

150 Ø 150

P Round cap ※ except ø150 model

Cap appearance
F Square cap attachment type

A Rotating lights
Functions
F Rotating light ・ Buzzer

D12 12 V d.c.

Power voltage D24 24 V d.c.

A11 110 - 220 V a.c.

R Red

Y Yellow
Cap colors
G Green

A Blue (only with Ø 84 model)

D Direct installation type (basic type)

Pedestal
M Supporter installation type ※ only with Ø60/ Ø84 models with rotating continuous light

155
 WARNING LIGHTS

RLA-WX/WXB
Specifications
Model RLA-WX□□ RLA-WXB□□

Appearance

Stand with cigar jack

Function Rotating continuous light Rotating continuous light, buzzer

Dimension Ø118 Square cap (direct installation, magnetic mounting bracket, magnetic mounting bracket and cigar jack)

Power voltage 12 V d.c., 24 V d.c., 110 V a.c. 50/60 ㎐, 220 V a.c. 50/60 ㎐

Power consumption ● 7.2 W (Power voltage : at 24 V d.c.), ● 12 W (Power voltage : at 220 V a.c.)

Flash speed About 60 times / 1 minute

Light source Xenon tube strobe light

Buzzer - Built-in buzzer (approx. 90 dB 1m apart)

Material ● Cap : Acrylic resin, ● Body : ABS resin

Cap color Red, blue, white

Protection structure IP54 (IEC 60529)

Suffix code
Model Code Content
RLA- □ □ □ Turn Light (Ø118)

WX Strobe light
Function
WXB Rotating continuous light and buzzer built-in

01 12 V d.c.

02 24 V d.c.
※ Direct installation type
10 110 V a.c.

20 220 V a.c.
Power voltage
10M 110 V a.c.
※ Permanent magnet stand
20M 220 V a.c.

01A 12 V d.c.
※ Permanent magnet stand with cigar jack for automobile
02A 24 V d.c.

R Red
Cap color
B Blue

156
 Warning Lights

LT series
Specifications Sign Tower

Appearance Suffix code Power voltage Power consumption Number of leds Rotating cycle Flickering
Max. 2.9 W Modular
LT-R-12 12–48 V d.c., 12–24 V a.c. 50/60 ㎐ 24
(power voltage: 12 - 48 V d.c) Sign Tower

LT-R-012 110/220 V a.c. 50/60 ㎐ Max. 5 W 24 New product

Panel lamp
Max. 2.9 W Approx. Approx.
LT-P-12 12–48 V d.c., 12–24 V a.c. 50/60 ㎐ 24 90 times / 50 times /
(power voltage: 12 - 48 V d.c)
min min Wall mounting
Indicator light
LT-P-012 110/220 V a.c. 50/60 ㎐ Max. 5 W 24

LT-PB-12 12–48 V d.c., 12–24 V a.c. 50/60 ㎐ Max. 2.9 W 24 Rotating

(power voltage: 12 - 48 V d.c) beacon

LT-PB-012 110/220 V a.c. 50/60 ㎐ Max. 5 W 24

Warning light
Suffix code
Model Code Content
LT- □ □ □ Signal Light (Ø84 Cap)
R Supporter mounting (rotating, flashing)
Installation type
P Direct mounting (rotating, flashing)
(Function) ※ Optional supporter (STM-105)
PB Direct mounting (rotating, flashing, buzzer built-in)
12 12–48 V d.c., 12–24 V a.c. 50/60 ㎐
Power voltage
012 110/220 V a.c. 50/60 ㎐
R Red
Cap color Y Yellow
G Green

SLB series
Specifications
Model SLB 060

Appearance

Dimensions (cap size) Ø 70 Cap

● P : Direct installation of round cap , ● R : Installation with round cap base,
Shape and function
● F : Direct installation of square cap, ● X : Installation with square cap base
Function ● A : Lighting only ● F : Lit, blinking, buzzer (selected by external input signal)
Rated voltage 24 V a.c. 50/60 Hz or 24 V d.c., 110 - 240 V a.c. 50/60 ㎐ (Order specification when the power supply voltage is 12 V)
Color Red, Yellow, Green
Light LED (Light-emitting diode)
Power consumption Max. 2 W (24 V a.c. / d.c.), max. 3.5 W (110 - 240 V a.c.)
Buzzer ● 2 types of buzzer melodies (single melody, beeping), ● volume : 80 dB (1 m distance)

Suffix code
Model Code Content
SLB □ -□ □ □ Turn Light
Dimension 060 Ø 70 Cap
RA Round type cap supporter mounting installation
XA Rectangular type cap supporter mounting installation
Continuous light only
PA Round type cap direct installation
Design and function
FA Rectangular type cap direct installation
PF Round type cap direct installation Continuous light, flashing light and buzzer selected
FF Rectangular type cap direct installation by the external signal
C51 24 V a.c. 50/60 Hz or 24 V d.c.
Power voltage C41 12 V a.c. 50/60 Hz or 12 V d.c. (※ order-made)
A11 110 - 240 V a.c. 50/60 ㎐
R Red
Cap color Y Yellow
G Green

157
 BUZZERS

HY-256/306/606/606N
Specifications
Model HY-256 HY-306 HY-606 HY-606N

Appearance

Voltage used 110 V a.c., 220 V a.c. 12 V d.c., 24 V d.c.

Approx. 4 VA : HY-256-1,HY-256-2,HY-306-1,HY-306-2 Approx. 8 VA：HY-606-1,HY-606N-1,HY-606-2,HY-606N-2
Power consumption
30 ㎃ Max.: HY-256-12,HY-256-24,HY-306-12,HY-306-24 30 ㎃ Max.: HY-606-12,HY-606N-12,HY-606-24,HY-606N-24
Power frequency 50/60 ㎐ (for 110 V a.c., 220 V a.c.)
Volume 85 dB (1 m) * HY-606-12, HY-606N-12, HY-606-24, HY-606N-24: 80 dB (1 m)
External diameter For Ø25 For Ø30 Rectangular panel flush (for Ø66) Rectangular panel extended (□80)

Suffix code
Model Code Content
HY- □ □ Power Buzzer
256 For Ø 25
306 For Ø 30
Dimension
606 Rectangular panel flush (for Ø 66)
606N Rectangular panel extended (□80)
1 110 V a.c. 50/60 ㎐
2 220 V a.c., 50/60 ㎐
Power supply voltage
12 12 V d.c.
24 24 V d.c.

HY-606MD/606MA
Specifications Suffix code
Model HY-606MD HY-606MA Model Code Content

HY-606 □ 4-Tone melody buzzer

Dimension

Power supply voltage 12 / 24 V d.c. 110 / 240 V a.c. MD 12 / 24 V d.c.

Power consumption Approx. 2.5 W Power supply
Power frequency - 50/60 ㎐ (Common) voltage
Volume 98 dB max (1 m) MA 110 / 220 V a.c.
External diameter Ø 66 panel cutout dimensions

HY-226M/256
Specifications Suffix code
Model HY-226MD/MA HY-256MD/MA Model Code Content

HY- □ □ 3-Tones Electronic Buzzer

Dimension
226 Ø 22 / Ø 25 dual usage (Front side: rectangular type)
Dimension
100-240 V a.c. 50/60 ㎐ / 100-240 V a.c. 50/60 ㎐ / 256 Ø 25 (front side: round type)
Power supply voltage
12 V d.c., 24 V d.c. 12 V d.c., 24 V d.c.
Power consumption 0.6 W / 13.5 W 0.6 W / 13.5 W
MD 12-24 V d.c.
Power frequency 50/60 Hz 50/60 Hz Power supply
Volume 80 dB 80 dB voltage
MA 100-240 V a.c. 50/60 ㎐
External diameter Ø22 / Ø25 Ø25

158
 Assembling Terminal Blocks

HYBT/HYTM series
Specifications
NEW
Strong/
4 tones melody/
3-tone
HYTM-15A HYBT-15A2 HYTM-25A HYTM-35A HYTM-60A HYTM-100A electronic
buzzer

Model New product

Prefabricated
Terminal block
Classification
New product
Stationary
Terminal block

Rated insulating voltage 600 V

Rated current 15A 15A 25A 35A 60A 100A Fuse holder

Insulation resistance Min. 100 ㏁ (between each live part and between each live part and mounting metal plate)
Dielectric strength 2500 V a.c. for 1 min (between live part and unfilled part) Rolled steel
Control box
Terminal bolt M3.5 M3.5 M4 M4 M6 M6
Ambient temperature & humidity -20 ~ 55 ℃, 45 ~ 85 % RH
Cable
Connector
External dimensions ● Separator
Model Appearance External dimensions Model Appearance External dimensions




HYTM-02
HYTM-15A (15A, 25A)

 

  

 





HYTM-04
(35A)
HYBT-15A2



 

   


HYTM-05
 (60A)

HYTM-25A

 

 

  



HYTM-06
(100A)
HYTM-35A

 

  

 



HYTM-60A


HYBT-12
 

(HYBT-15A2-A)
  



HYTM-100A

 

   HYBT-12

(HYBT-15A2-B)

Accessories
● Applying Accessory Classification
Model HYTM-15A HYBT-15A2 HYTM-25A HYTM-35A HYTM-60A HYTM-100A
Rail HYBT-01
Separator HYTM-02 HYBT-12 HYTM-02 HYTM-04 HYTM-05 HYTM-06
Stopper HYBT-07
Terminal number plate HYTM-08 HYBT-08 HYTM-08
Terminal number plate cover HYTM-07 HYBT-10 HYTM-07
Short terminal HYBT-13 HYBT-13 - - - -

159
 ASSEMBLING TERMINAL BLOCKS
● Aluminum Rail (DIN rail)
Appearance External dimensions

HYBT-CH10 (For 10A)

HYBT-01 (For 15A ~ 100A)

HYBT-01A (For warp 15 A ~ 100 A)

● Stopper
Model Appearance External dimensions

HYBT-ST10

HYBT-07

● Terminal number plate cover

Model Appearance External dimensions

HYBT-08
※ For HYBT-15A2 1,000




HYTM-08
 

● Seal
Model Appearance External dimensions

HYBT-10 (9 ㎜ Width)
※ For HYBT-15A2 1,000


HYTM-07 (7.7 ㎜Width)



● Short Bar
Appearance External dimensions

HYBT-13-3

HYBT-13-6

HYBT-13-12

HYBT-13-20
※ Short bar HYBT-13-3~13-20 are only for the HYBT-15A

160
 Fixing Type Terminal Blocks

HYT series NEW

Strong/
4 tones melody/
● For rated current 10 A 3-tone
electronic
Model Appearance Rating Horizontal Width Height Fixed dimensions buzzer

New product
HYT-1010 10A 10P 112 24 17 102.5 Prefabricated
Terminal block

● For rated current 20 A New product

Stationary
Model Appearance Rating Horizontal Width Height Fixed dimensions Terminal block

HYT-203 20A 3P 56 30 20 44
HYT-204 20A 4P 68 30 20 56 Fuse holder

HYT-206 20A 6P 89 30 20 78
HYT-2010 20A 10P 137 30 20 126 Rolled steel
Control box
HYT-2012 20A 12P 163 30 20 150.5
HYT-2015 20A 15P 199 30 20 187
Cable
HYT-2020 20A 20P 257 30 20 245 Connector

● For rated current 30 A

Model Appearance Rating Horizontal Width Height Fixed dimensions
HYT-303 30A 3P 67 5 24 54.5
HYT-304 30A 4P 83 35 24 70
HYT-306 30A 6P 113 35 24 100.5
HYT-3010 30A 10P 153 35 24 143

● For rated current 60 A

Model Appearance Rating Horizontal Width Height Fixed dimensions

HYT-603 60A 3P 84.5 40 31 28

HYT-604 60A 4P 113.5 40 31 57

● For rated current 100 A

Model Appearance Rating Horizontal Width Height Fixed dimensions

HYT-1003 100A 3P 104.5 55.5 36.5 35

HYT-1004 100A 4P 140 55.5 36.5 70

● For rated current 150 A

Model Appearance Rating Horizontal Width Height Fixed dimensions

HYT-1503 150A 3P 115.5 67.5 41 39

HYT-1504 150A 4P 153 67.5 41 77

● For rated current 200 A

Model Appearance Rating Horizontal Width Height Fixed dimensions

HYT-2003 200A 3P 134 72.5 44.5 45

HYT-2004 200A 4P 180 72.5 44.5 90

● For rated current 300 A

Model Appearance Rating Horizontal Width Height Fixed dimensions

HYT-3003 300A 3P 155.5 83.5 49.5 51.8

HYT-3004 300A 4P 207.5 83.5 49.5 103.6

● For rated current 400 A

Model Appearance Rating Horizontal Width Height Fixed dimensions

HYT-4003 400A 3P 155.5 83.5 49.5 51.8

HYT-4004 400A 4P 207.5 83.5 49.5 103.6

● For rated current 500 A

Model Appearance Rating Horizontal Width Height Fixed dimensions

HYT-5003 500A 3P 204 94 59.5 68

HYT-5004 500A 4P 270 93 59.5 136

161
 FIXING TYPE TERMINAL BLOCKS

HY-F15/F30 series UPGRADE

Specifications
Model F15-1A F15-1D F15-2A F15-2D F15-3A F15-3D F30

Appearance

Rated current 250 V a.c. 15 A 24 V d.c. 10 A 250 V a.c. 15 A 24 V d.c. 10 A 250 V a.c. 15 A 24 V d.c. 10 A 30 A 600 V a.c.

AC 110-220 V a.c. 110-600 V a.c.

Remarks
DC 12-24 V d.c. ※ For Ø 6 X 30 ㎜ ceramic fuses ※ For Ø 12 X 50 ㎜ ceramic fuses

HY-25/30 series UPGRADE

Specifications
Appearance Model Materials Remarks

HY-2501

HY-2502

HY-2503
Rolled iron Ø 25
HY-2504

HY-2505

HY-2506

HY-3001

HY-3002

HY-3003
Rolled iron Ø 30
HY-3004

HY-3005

HY-3006

Suffix code
Model Code Content
HY- □ □ Rolled Iron Control Boxes
25 Ø 25 installation hole
Installation hole
30 Ø 30 installation hole
01 1 Hole
Number of holes
02 2 Hole (03 : 3 Hole, 04 : 4 Hole, 05 : 5 Hole, 06 : 6 Hole)

HYC-M1/M2
Suffix code
Appearance Model Material Remarks

HYC-M1 Polycarbonate (PC) Ø8

HYC-M2 Polycarbonate (PC) Ø11

162
MAIN PRODUCTS
Temperature controllers / Recorders / Counters / Timers / Panelmeters / Multi pulse meters / Proximity sensors / Photo sensors / Rotary encoders / Thyristor power regulators /
Solid state relays / Power supplies / Control switches / Combination display lights / Power switches / Main switches / Cam switches / Limit switches / Micro switches /
Pendant switches / Foot switches / Mono lever switches / Sign towers / Turn lights / Buzzers / Terminal blocks / Fuse holders / Control boxes / Connector cables

HANYOUNG NUX CO.,LTD.

28, Gilpa-ro 71 beon-gil, Nam-gu, Incheon, Korea
CA211104

Tel : +82-32-876-4697 Fax : +82-32-876-4696

E-mail : [email protected]
※ The information contained in this catalogue may change without prior notice for upgrade purposes.