Scribd
Upload
133 views1 page

Rig 4

This document summarizes the specifications of the NDC Rig-4 drilling rig. The rig has a 750 horsepower drawworks powered by two Caterpillar C15 diesel engines. It also features a 114 foot telescopic mast, hydraulic telescoping substructure, and can drill to a depth of 11,400 feet. The rig is equipped with mud pumps powered by a 700 horsepower Caterpillar C18 engine and has 1100 barrel active mud tanks. Safety equipment is adequate for operation.

Uploaded by

Ahmed Saad
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
133 views1 page

Rig 4

This document summarizes the specifications of the NDC Rig-4 drilling rig. The rig has a 750 horsepower drawworks powered by two Caterpillar C15 diesel engines. It also features a 114 foot telescopic mast, hydraulic telescoping substructure, and can drill to a depth of 11,400 feet. The rig is equipped with mud pumps powered by a 700 horsepower Caterpillar C18 engine and has 1100 barrel active mud tanks. Safety equipment is adequate for operation.

Uploaded by

Ahmed Saad
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

 

NDC Rig-4 (750 HP)

1. DRAW WORKS Make: Loadcraft


Type: LCI-750
Rated Power: 750 HP
Rated Load Capacity: 440,000 lbs
Drill Line Size: 1 1/8''
Transmission Type: Allison CLT-6061
Auxiliary brake: Hydro-matic brake Parmac 202
Draw work Drive: 2 x Cat C15- 525 hp ea Engines
Rated Working Depth: 11,400 ft with 3 1/2” DPs.

2. MAST Make: Loadcraft, Type: Telescopic


Clear Height: 114 ft.
Monkey Board Height: 55 ft.
Wind Rating: 69 MPH
API Static Hook Load: 365,000 lbs (10 Lines)
Racking Capacity: 180 stands of 3 1/2”

3. SUBSTRUCTURE Make: Loadcraft, Type: Hydraulic Telescoping


Setback API Rated Load Capacity: 225,000 lbs
Rotary Beams Load Capacity: 325,000 lbs
Clear height between Rotary Beams and ground Level: 14 ft
Rig Floor Height from ground Level: 17.5 ft

4. CROWN BLOCK Make: Loadcraft, Type: Bender Arrangement


Rated Load Capacity: 365,000 lbs
Sheaves number & size: 5 x 30" + 1 x 36" - 1 1/8"

5. TRAVELLING BLOCK &HOOK Make & Type: American Utilities, D30-E200


Rated Load Capacity: 200 tons.
Sheaves & size: 5 x 30”

6. ROTARY TABLE Make & Type: Hacker


Rated Capacity: 350 Tons
Size: 22''

7. POWER SWIVEL Make & Type: Logan, S-120


Rated Capacity: 120 Tons
Max. Rated Torque: 8,100 ft-lb
Kelly: 4 1/4'', Hexagonal, 5000 PSI, 42 ft, NC38

8. DEAD LINE ANCHOR Hercules Model 129-T

9. DRILLING LINE 1 1/8” IWRC 6x19.

10. RIG POWER SYSTEM 2 Ea. Cat. C-15 "5 2 5 HP", Engines for Carrier
1 Ea. Cat. C-18 "700 HP", Engine for Mud Pump.
2 Ea. Cat. 3406 "400 HP", GEN. SET.
Fuel Tanks Capacity: 200 bbls.
Air Compressor: 2 Ea. Sullair, 2209A, 125 Psi.
Air Vessels: 2 x 2m3

11. MUD PUMPS Make & Type: 1 ea Gardner Denver PZ-7


Rated Input Power: 550 HP.
Driving Motors: 1 ea. Diesel Engine, Cat C-18, 700 HP
Rated Pressure: 5,000 PSI

12. MUD TANKS Active Volume: 1100 bbl’s


Water Tanks Volume: 340 bbls

13. SOLID CONTROL SYSTEM Shale Shaker: 1 Brandt, Dual, Junior Tandem

14. BLOW OUT PREVENTER 11” - 5000 Psi Church Energy, SPH, Type 52 Annular.
11” - 5000 Psi Control Flow , DRH Double Ram.
Choke Manifold: Control Flow 2 1/16'' - 5000 Psi
Accumulator: Koomey, Model TB224-15ST3, 220 Gallons,20 Bottles

15. SAFETY EQUIPMENT Adequate for operation

16. MINI CAMP Adequate for contractor & client.


 

You might also like