Hydraulic Piston Pump

DPA Series

•Head office 456-3, Nae-dong Changwon, Gyungnam, Korea (Zip code : 641-050) DM 002-FEB/09
Telephone. +82-55-269-5310, 5311 Telefax. +82-55-269-5222 E-mail. [email protected]
•Europe office TongMyung Engineering Europe GmbH
Werftstr 17 D-40549 Dusseldorf Germany
Telephone. +49-211-569-2765 Telefax. +49-211-569-2766 E-mail. [email protected]
 Hydraulic Piston Pump DPA Series

Piston Pump DPA Series

Features Specification

Shortening the length of pump Max

Displacement Rated Pressure Max Pressure
Max. Speed
for self priming Max. input Torque Weight Application
Model
The total length of DPA series is 30% shorter than the conventional tandem pump of same class of displacement. cc/rev kgf/cm2 Mpa kgf/cm2 Mpa rpm kgf m N m kgf ton
Various Controls DPA117 117 X 2 350 34.2 400 39.2 2,450 75 735
121
(including Bell Housing) 20~25
The DPA series can be controlled by hydraulic input either negative pilot pressure or positive one.
Beside, it is capable of responding to electrical and electronic input signal. DPA140 140 X 2 350 34.3 400 39.2 2,400 90 882
160
(including Bell Housing) 29~34
Reduced Noise and Pressure Pulsation
The rigid parts design and analysis of cylinder pressure decreases noise level and pressure pulsation.
Dimensions
High Reliability and Long Life
A high reliability is obtained by solving the over-load problem, as well as the fretting corrosion between swash-plate and
support, decreasing the possibility of external leakage through one body and several short bolts,
and increasing the strength of parts including shaft.

Model D1 D2 D3 L1 L2 L3 L4 L5 L6 L7 L8 L9 L10 L11

DPA117 409.6 428.6 450 64 452 83 350 260 250 100 93 120 199 255
DPA140 511.2 530.2 553 43 499 96 402 285 277 114 104 107 208 282

Discharge Flange Suction Flange

Size a b c d e f Size a b c d
DPA117 23.8 50.8 19 63 10 M10-16 DPA117 50.8 88.9 60 M12-18
DPA140 27.8 57.2 25 73.5 10 M12-22 DPA140 61.9 106.4 75 M16-24

Dimensions of shaft end

Model No. of teeth P.C.D Pressure Angle Module Rule
DPA117 12 30.0 20° 2.5 JIS D2001
DPA140 17 42.5 20° 2.5 JIS D2001
 Main Control Valve
Remote Control Valve
Pedal Valve

•Head office 456-3, Nae-dong Changwon, Gyungnam, Korea (Zip code : 641-050) DM 002-FEB/09
Telephone. +82-55-269-5310, 5311 Telefax. +82-55-269-5222 E-mail. [email protected]
•Europe office TongMyung Engineering Europe GmbH
Werftstr 17 D-40549 Dusseldorf Germany
Telephone. +49-211-569-2765 Telefax. +49-211-569-2766 E-mail. [email protected]
 Main Control Valve / Pedal Valve / Remote Control Valve

Main Control Valve Pedal Valve

Features Features

The TMVO-70 valve series is operated by pilot signal. The RCVP4 valve is excellent in dustproof, waterproof and
It has some load check in each section and durability and is designed for minimizing pressure loss.
also includes boom holding valve. This valve also performs excellent response.
This valve system is designed with paralled and tandem circuit.
It provide our customer to control precisely.
Specification Dimensions

Max. input pressure Max. output pressure Max. Flow

Model Application
Mpa Mpa (ℓ/min)

Dimensions RCVP4 6.9 0 ~ 3.9 10 5~8ton

Specification
Remote Control Valve
Max. Pressure Max. Flow
Model Features Application
Mpa (ℓ/min)
Features
TMVO-70-10 25 70 Sectional Type 5~8ton

The operating torque can be lowered upon a demend, it is

controlled by a reduced operation force.
A good response is gained by minimizing pressure loss.
By attaching an electric switch, it is easy to compose an
electric control as a safty function.

Specification Dimensions

Max. input pressure Max. output pressure Max. Flow

Model Application
Mpa Mpa (ℓ/min)
TR40K 9.8 0 ~ 3.9 30 All types of excavators
 Hydraulic Piston Pump
T5V Series

•Head office 456-3, Nae-dong Changwon, Gyungnam, Korea (Zip code : 641-050) DM 002-FEB/09
Telephone. +82-55-269-5310, 5311 Telefax. +82-55-269-5222 E-mail. [email protected]
•Europe office TongMyung Engineering Europe GmbH
Werftstr 17 D-40549 Dusseldorf Germany
Telephone. +49-211-569-2765 Telefax. +49-211-569-2766 E-mail. [email protected]
 Hydraulic Piston Pump T5V Series

Piston Pump T5V Series

Features Specification

The T5V series are high-pressure, swash-plate type pump developed for construction equipments and general industrial Max Max. Speed
Rated Pressure Max Pressure Max. input torque Weight Application
machinery based upon our long and rich experience. Model Displacement for self priming
cc/rev kgf/cm2 Mpa kgf/cm2 Mpa rpm kgf m N m kgf ton
High reliability and longevity are achieved by adoption of the high-load bearings and unique anti-wear materials for rotating T5V63 63 X 2 320 31.4 350 34.3 2,650 35 343 81 13~17
group T5V80 80 X 2 320 31.4 350 34.3 2,400 54 529 84 13~17
The spherical valve plate and improved hydraulic balance provide stable cylinder rotation, thus achieving high efficiency even T5V112 112 X 2 320 31.4 350 34.3 2,360 60 588 125 20~25
in a low-pressure and low-speed operating range. T5V140 140 X 2 320 31.4 350 34.3 2,150 114 1117 160 29~37
T5V180 180 X 2 320 31.4 350 34.3 1,950 112 1098 160 39~45
The T5V series can be controlled by hydraulic or electrical methods. And various control methods such as flow control,
pressure control, horsepower control, and the combination of these are standardized and available.

Optional gear pumps of various sizes can be attached. Dimensions

Accordingly, separate pump unit is not necessary as control
or medium duty system pressure source.
Hydraulic units can thus be made compact.

Model D1 D2 d L1 L2 L3 L4 L5 L6 L7 L8 L9 L10 L11 L12 L13 L14 L15 L16 L

T5V63 180 125 18 76 70 70 140 190 89 98 8 228 138 37 37 464 97 195 78 618
T5V80 180 125 18 76 70 70 140 190 89 98 8 228 138 37 37 464 97 195 78 618
T5V112 224 160 22 78 80 80 140 234 100 110 8 265 167 41 41 538 109 220 78 694
T5V140 250 180 22 93 92 92 140 256 112 123 8 305 190 53 53 618 121 245 80 791
T5V180 250 180 22 93 92 92 140 256 112 123 8 305 190 53 53 618 121 245 80 791

Dimensions of shaft end

Size no. of teeth Pitch circle dia Pressure angle Module Rule
o
T5V63 14 29.6 30 12/24 SAE
T5V80 12 30.0 20o 2.5 JIS D2001
T5V112 12 30.0 20o 2.5 JIS D2001
T5V140 17 42.5 20o 2.5 JIS D2001
T5V180 17 42.5 20o 2.5 JIS D2001
 Hydraulic Piston Pump
T5VP2D28/36 Series

•Head office 456-3, Nae-dong Changwon, Gyungnam, Korea (Zip code : 641-050) DM 002-FEB/09
Telephone. +82-55-269-5310, 5311 Telefax. +82-55-269-5222 E-mail. [email protected]
•Europe office TongMyung Engineering Europe GmbH
Werftstr 17 D-40549 Dusseldorf Germany
Telephone. +49-211-569-2765 Telefax. +49-211-569-2766 E-mail. [email protected]
 Hydraulic Piston Pump T5VP2D28/36 Series

Piston Pump T5VP2D28/36 Series

Features Dimensions

This is a variable displacement double-piston pump discharging with two equal displacements from one cylinder block. T5VP2D28
This pump is so compact as to be appeared a single pump though this is actually a double pump.

Specification
Max Displacement Pressure (kgf/㎠) Max. Speed Max. input torque Hydraulic fiuid Weight T5VP2D36
Model
(cc/rev) Rated Max rpm kgf m Oil temperature range Oil viscosity range kgf

T5VP2D28 27.5 X 2 220 250 2,600 14 -20 ~ +95℃ 10 ~ 1,000 cSt 33

T5VP2D36 36 X 2 280 300 2,100 16.7 -20 ~ +95℃ 10 ~ 1,000 cSt 47

Dimensions
Model D1 D2 D3 d L1 L2 L3 L4 L5 L6 L7 L8 L9 L10 L11 L12 L13 L14
T5VP2D28 146 101.6 175 14 106 97 104 95 5 44 14.5 95 203 45 346 93.5 181.5
T5VP2D36 127 181 14 122.5 133 115.5 123 8 58.8 16.5 110 230.2 73.5 322.7 133 182.2 200.2

Dimensions of shaft end

Model no. of teeth Pressure angle Module major diameter minor diameter Rule
T5VP2D28 13 30° 16/32 ø21.8mm ø18.63mm SAE
T5VP2D36 14 35° 12/24 ø31.2mm ø26.99mm SAE

Flange mounting face for suction port

Model a b e e-DEPTH L16
T5VP2D28 37.5 69.9 40 M-12-18 177.5
T5VP2D36 50.8 88.9 55 M-12-15 200.2

Flange mounting face for delivery port

Port size g h L18 L20 L19 O-ring
PF 3/4 ø45 ø29.8 2.5 3.5 20 P24
PF 3/8 ø28 ø18.6 2.0 2.5 15 P14
PF 1/2 ø34 ø22.6 2.5 2.5 19 P18
PF 1/4 ø24 ø15.6 1.5 2.5 15 P11
 Hydraulic Piston Motor
TM Series

•Head office 456-3, Nae-dong Changwon, Gyungnam, Korea (Zip code : 641-050) DM 002-FEB/09
Telephone. +82-55-269-5310, 5311 Telefax. +82-55-269-5222 E-mail. [email protected]
•Europe office TongMyung Engineering Europe GmbH
Werftstr 17 D-40549 Dusseldorf Germany
Telephone. +49-211-569-2765 Telefax. +49-211-569-2766 E-mail. [email protected]
 Hydraulic Piston Motor TM Series

Specification

Piston Motor TM Series

Reduction Gear Hydraulic Motor
Application Weight
Model Gear Ratio Theoretical Output Torque Output Speed Displacement Output Speed Max Pressure Brake Torque (at Motor Shaft)
i kgf m N m max rpm cc/rev max rpm kgf/cm2 Mpa kgf m N m ton kgf
TM07VA 53.706 780 7,651 65 39.8 3,900 300 29.4 8.4 82 5~8 78
TM07VC 53.706 850 8,335 60 55.8 3,900 350 34.3 8.4 82 5~8 80
Features DM05VA 56.436 663 6,499 90 33.5 4,500 300 29.4 6.3 62 4~5 57
DM06VA 56.436 750 7,755 90 33.5 4,500 300 29.4 6.3 62 5~6 61
DM09VA 45.970 1,100 10,787 60 55.8 3,900 350 34.3 8.4 82 6~8 82
Piston motor has a variable displacement (two speed) swash plate and incorporates a brake valve and a mechanical brake TM10VD 54.467 1,250 12,250 70 55.8 3,900 350 34.3 12 117.6 8~10 90
needed for travelling. TM motor with planetary gear reducer offers outstanding features. TM10VC 53 1,512 14,823 60 86 3,200 350 34.3 19.7 193 8~10 125
Hydraulically balanced piston motor ensures reliable changeover of the displacement by external pilot control TM18VC 53 2,151 21,094 60 86 3,200 350 34.3 19.7 193 13~18 136
(1.5 ~ 2 : 1 speed ratio) TM22VC 53.706 2,616 25,655 60 86 3,200 350 34.3 19.7 193 13~18 145
TM24VA 48 2,791 27,366 58 140.5 2,800 350 34.3 40.6 398 13~18 238
TM30VC 39.14 3,488 34,207 70 157.5 2,800 350 34.3 40.6 398 15~20 230
The motor offers speed control and braking to minimize shock with a built-in double counterblance valve and shockless relief TM35VA 41.73 3,069 39,883 50 183.9 2,100 350 34.3 49.3 483 18~25 308
valve. (These valves are not necessary for a closed circuit.) TM40VC 48 4,651 45,609 50 183.9 2,400 350 34.3 49.3 483 18~25 308
The mechanical brake is a negative. The brake is automatically activated or released when the stop or start. TM40VD 49.95 4,651 45,609 56 174.4 2,800 350 34.3 40.6 398 18~25 276
TM50/60VC 63.843 6,977 68,414 40 195 2,600 350 34.3 44.5 436 29~34 380
The case rotation type gear reducer has improved durability and reliablity because of its simple TM60VD 46.127 7,200 70,607 52 280 2,400 350 34.3 87 853 29~34 355
TM70VC 70.15 7,558 74,115 36 195 2,600 350 34.3 44.5 436 34~37 380
and equally loaded design in addition to high-precision machine parts.
TM70VD 54.470 8,000 78,400 45 280 2,400 350 34.3 87 853 34~37 355
The motor uses heavy duty bearings to ensure long life. 68.23 10,000 98,060 40 280 2,700 350 34.3 115.7 1,135 45~55 520
TM100VD
An efficient floating seal also prevents dust and water from
entering into the motor. Dimensions

Model A B C D E F G H J K L M N P
TM07VA 340 268 306 119 68 244 210 250 282 12-M14 X P2.0 12-M14 X P2.0 PF1/2 PF3/8 PF1/4
TM07VC 345 268 306 124 68 244 210 250 282 12-M14 X P2.0 12-M14 X P2.0 PF1/2 PF3/8 PF1/4
DM05VA 288 264 290 92 68 240 200 230 262 12-M14 X P2.0 9-M14 X P2.0 3/4-16UNF 9/16-18UNF 9/16-18UNF
DM06VA 288 264 290 92 68 240 200 230 262 12-M14 X P2.0 9-M14 X P2.0 3/4-16UNF 9/16-18UNF 9/16-18UNF
DM09VA 340 280 326 126 80 250 210 265 300 12-M16 X P2.0 12-M14 X P2.0
TM10VD 353 278 328 120 80 250 210 265 300 12-M16 X P2.0 12-M16 X P2.0 PF1/2 PF3/8 PF1/4
TM10VC 389 298 362 134 88 270 230 292 332 15-M16 X P2.0 12-M16 X P2.0 PF3/4 PF1/2 PF1/4
TM18VC 392 308 394 134 99.5 280 246 324 364 20-M16 X P2.0 15-M16 X P2.0 PF3/4 PF1/2 PF1/4
TM22VC 398 308 394 124 99.5 280 246 324 364 20-M16 X P2.0 15-M16 X P2.0 PF3/4 PF1/2 PF1/4
TM24VA 481.5 372 432 138 99.5 340 300 362 402 30-M16 X P2.0 24-M16 X P2.0 PF1, PF3/4 PF1/2 PF1/4
TM30VC 464 372 432 138 99.5 340 300 362 402 30-M16 X P2.0 24-M16 X P2.0 PF1, PF3/4 PF1/2 PF1/4
TM35VA 540 370 470 171 98.5 340 300 402 440 30-M16 X P2.0 30-M16 X P2.0 SAE 1” PF1/2 PF1/4
TM40VC 540 370 470 159 98.5 340 300 402 440 30-M16 X P2.0 30-M16 X P2.0 SAE 1” PF1/2 PF1/4
TM40VD 502 370 470 138 98.5 340 300 402 440 30-M16 X P2.0 30-M16 X P2.0 SAE 1” PF1/2 PF1/4
TM50/60VC 569 462 525 175 112 425 380 450 490 20-M20 X P2.5 24-M20 X P2.5 SAE 1” PF1/2 PF1/4
TM60VD 553 460 525 166 112 425 380 450 490 30-M20 X P2.5 28-M20 X P2.5 SAE 1” PF1/2 PF1/4
TM70VC 569 462 525 175 112 425 380 450 490 26-M20 X P2.5 24-M20 X P2.5 SAE 1” PF1/2 PF1/4
TM70VD 553 460 525 166 112 425 380 450 490 34-M24 X P3.0 32-M20 X P2.5 SAE 1” PF1/2 PF1/4
TM100VD 668 500 586 207 130 460 420 510 550 26-M24 X P3.0 36-M20 X P2.0 SAE 1-1/4” PF1/2 PF1/4