Scribd Logo
Upload

Welcome to Scribd!

  • 242 views

    PMT Hps Rtu2020 Quick Start Guide Rtdoc x342 en 110a

    Uploaded by

    Salah Hamo

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    PMT Hps Rtu2020 Quick Start Guide Rtdoc x342 en 110a

    Uploaded by

    Salah Hamo
    242 views7 pages

    Original Title

    pmt-hps-rtu2020-quick-start-guide-rtdoc-x342-en-110a

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    242 views7 pages

    PMT Hps Rtu2020 Quick Start Guide Rtdoc x342 en 110a

    Uploaded by

    Salah Hamo

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 7

    RTU2020

    Quick Start Guide


    RTDOC-X342-en-110A
    Release 110
    July 2015

    This document provides details to get you quickly connected to RTU2020 controller
    from RTU Builder. It does not provide any detailed instructions, programming advice or
    expansion I/O configuration. Please see the listed references for additional details.
    Various other documents are available in the RTU2020 Software Media Kit.

    Copyrights, Notices and Trademarks


    Copyright 2015 by Honeywell
    Revision A, July 2015
    Trademarks
    Honeywell is registered trademarks of Honeywell International Inc.
    Other brand or product names are trademarks of their respective owners.

    References
    The following list identifies publications that may contain information relevant to the
    information in this document.

    Document Title Document ID


    RTU2020 Hardware Planning and Installation RTDOC-X284-en-110A
    User’s Guide
    RTU2020 Software Installation User’s Guide RTDOC-X285-en-110A

    RTU2020 User’s Guide RTDOC-X283-en-110A

    Honeywell Process Solutions


    RTU2020 Quick Start Guide

    Table of Contents
    What You Need................................................................................................................... 3
    RTU2020 Factory Default Network Settings ....................................................................... 3
    Step 1: Install RTU Builder ........................................................................................... 3
    Step 2: Power up RTU2020 ......................................................................................... 3
    Step 3: Prepare to Change RTU2020’s IP Address ..................................................... 4
    Step 4: Connect to RTU2020 and Download Project ................................................... 5
    Step 5: You are Ready to Configure and Program Your RTU ...................................... 6

    2 RTU2020 Quick Start Guide May 2015


    Quick Start Guide

    What You Need


     RTU2020 controller
     RTU2020 Software Media Kit
     Ethernet cable
     24 VDC power source and cable
     Computer to host RTU Builder

    RTU2020 Factory Default Network Settings


    The following table lists the factory default network settings of RTU2020. If your RTU
    has been previously configured, these settings may have been changed.
    Port Default Setting
    ETH 1 IP address is dynamically assigned from a DHCP server.
    If no DHCP server is found by RTU2020, an IPv4 link-local address
    will be assigned, (169.254.x.x).
    ETH 2 Static IP address: 192.168.1.50

    Step 1: Install RTU Builder


    1. Insert the RTU2020 Software Media Kit into the DVD-ROM drive of
    your target computer.
    2. In the Application directory, double-click rtu_builder_setup.exe.
    3. Follow the on screen prompts to install RTU Builder.
    For full instructions on how to install RTU Builder, see the RTU2020 Software
    Installation User’s Guide.

    Step 2: Power up RTU2020


    1. Connect 24 VDC supply to RTU2020.

    2. According to the RTU factory default network settings for Ethernet port
    1 and Ethernet port 2 in the above table, connect an Ethernet cable to
    the port most appropriate for your situation.
    3. Connect the other end of the Ethernet cable to your RTU Builder
    computer directly or through a switch.

    3 RTU2020 Quick Start Guide


    Quick Start Guide

    For full instructions on how to install RTU2020 controller, see the RTU2020
    Hardware Planning and Installation User’s Guide.

    Step 3: Prepare to Change RTU2020’s IP Address


    The first thing you will normally want to do is set the IP address for RTU2020. To
    prepare for that, this step describes how to configure a fixed IP address starting with
    creating a new project.
    1. Launch RTU Builder by selecting Start > All Programs > Honeywell
    > RTU Builder > RTU Builder or double click the shortcut for RTU
    Builder on the desktop. The RTU Builder Start Page appears.

    2. From Start Page, click Create Project. The Create New Project from
    Template window appears.
    3. In the Available Templates list, click the default template.

    4 RTU2020 Quick Start Guide


    Quick Start Guide

    4. Click Next. The Save As dialogue box appears. Select appropriate


    directory to save the project file and enter the name for the project in
    the File name box. Click Save. The Home Page appears.

    5. From Home Page, click the arrow next to Configure Ethernet Ports
    under Communication.
    6. Select the target port and the corresponding configuration interface
    appears.
    7. Under Network Setting, select Use the following IP address and
    type IP Address, Subnet Mask and Gateway.
    8. Under Protocol Binding, make sure to select RTU Configuration
    Protocol check box.
    This is the protocol RTU Builder uses to communicate to RTU2020. If it
    is not selected, RTU Builder cannot communicate to the RTU through
    that port.
    9. If you need a SCADA system or other devices to communicate to this
    RTU, then you should select the other relevant protocols. E.g.,
    ‘Modbus TCP Slave’ might be used for a SCADA system.
    TIP: If an Ethernet port is not required, if you do not plug a cable into
    that port, then the RTU will consume less power. This is irrespective of
    the configuration of that port. Port 1 consumes more power than port 2.
    If only one port is required and power consumption is important, then
    we recommend using port 2.
    10. Click Save to save the changes and click Back to return to Home Page.

    Step 4: Connect to RTU2020 and Download Project


    You now have a project file prepared with the new IP address configured. This step
    describes how to connect to RTU2020 from RTU Builder and download the
    configuration.
    1. From Home Page, click Connect RTU. The Connect RTU window
    appears.
    2. Select the target RTU from the scan list.
    3. In the User name drop-down list, select Engineer. If this is the first
    time connecting to the RTU, you need to type in the initial password
    'Engr@123', and then you will be prompted to change the password

    RTU2020 Quick Start Guide 5


    Quick Start Guide

    immediately. Remember your new password as it will be required for


    future logins.
    4. Click Connect.
    5. Click Download. After download completes, click OK.
    6. Depending on which port you have configured in the project, you may
    need to change which port the Ethernet cable is plugged into at the
    RTU. Click Connect. Select the target RTU in the Connect RTU pop-
    up window.
    7. Select your current user name. And type the password. Click Connect.

    Step 5: You are Ready to Configure and Program


    Your RTU
    The RTU is now configured with your IP address. To continue with other RTU
    configuration settings such as I/O and to program your RTU, see the RTU2020
    User's Guide for further assistance.

    6 RTU2020 Quick Start Guide


    Quick Start Guide

    World Wide Web


    Honeywell Process Solutions website:
    http://www.honeywellprocess.com/support
    Elsewhere
    Contact your nearest Honeywell office.
    Training Classes
    Honeywell Automation College:
    http://www.automationcollege.com

    Honeywell Process Solutions


    1250 W Sam Houston Pkwy S RTDOC-X342-en-101A
    Houston, TX 77042 June 2015
    www.honeywellprocess.com @2015 Honeywell International Inc.

    You might also like