Scribd
Upload
303 views1 page

Checking of Collar Bolts in Shear & Bearing: Client: India Eqpt.: Job No. DR No. Rev. Document Number

The document summarizes calculations to check the shear and bearing strength of 40 collar bolts on a tail gas heater. It determines that the total load on the bolts is 17667062 N. It then calculates that the shear/bearing load on each bolt is 441677 N. Using the material properties and bolt dimensions, it determines the shear strength and bearing strength of each bolt. It concludes that the shear strength and bearing strength of each collar bolt exceeds the shear and bearing loads, respectively, and therefore the bolt design is safe.

Uploaded by

shazan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
303 views1 page

Checking of Collar Bolts in Shear & Bearing: Client: India Eqpt.: Job No. DR No. Rev. Document Number

The document summarizes calculations to check the shear and bearing strength of 40 collar bolts on a tail gas heater. It determines that the total load on the bolts is 17667062 N. It then calculates that the shear/bearing load on each bolt is 441677 N. Using the material properties and bolt dimensions, it determines the shear strength and bearing strength of each bolt. It concludes that the shear strength and bearing strength of each collar bolt exceeds the shear and bearing loads, respectively, and therefore the bolt design is safe.

Uploaded by

shazan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 1

CLIENT : PSS a/c Thaioil, Thailand

YAMUNA NAGAR
INDIA EQPT. : Tail Gas Heater No. 1 PAGE: -

Designed by: PZX JOB NO. PE2385 DR NO. PE2385A REV. -


Document Number : R1118111-S10008-EXC-E11601-10011-F02

Checking of Collar Bolts in Shear & Bearing

Total load on bolts L = 17667062 N

Total Qty of Bolts n = 40

Shear/Bearing Load on each Collar Bolt Ls=L/n = 441677 N

Allowable Stress of Bolts in Tension @ Design Temperature = 138 N/mm2

Allowable in Shear = 0.4 x Yield Strength (550 MPa) = 220 N/mm2

Allowable in bearing = 0.8 x Yield Strength (550 MPa) = 440 N/mm2

Dia of Bolt at Collar d = 57.15 mm

OD of Collar Bolts D = 83 mm

Thk. of Bolt at Collar t = 38 mm

Pitch of Threads p = 3.175 mm

Width of threads at pitch diameter w = p/2 = 1.5875 mm

Minor diamter of threads d3 (as per ASME B1.1) = 53.37 mm

Nos of engaged threads ne = 11.97 mm

Shear Area Sa = pi*d3*w*ne = 3185.70 mm2

Shear Strength of Collar Bolt = Sa x allowable in shear = 700854 N

Shear Strength of Collar Bolts > Shear Load, hence safe

Bearing Strength of Collar Bolts = pi x 0.25 x (D^2-d^2) x allowable in Bearing = 1251977 N

Bearing Strength of Collar Bolts > Bearing Load, hence safe

You might also like