Scribd
Upload
77 views19 pages

Axial Deformation

This document discusses axial deformation and elastic deformation of axially loaded members. It includes: - An example problem calculating the vertical displacement of end A and the displacement of B relative to C for a steel bar with varying cross-sectional areas under an applied load. - Another example problem determining the vertical movement of an applied load P for a rigid bar attached to vertical aluminum and steel rods. - A final example problem calculating the displacement of the end of a conical member suspended vertically due to its weight. Saint-Venant's principle and equations for stress, strain, displacement, and internal forces are also referenced throughout.

Uploaded by

Vanessa Aggabao
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
77 views19 pages

Axial Deformation

This document discusses axial deformation and elastic deformation of axially loaded members. It includes: - An example problem calculating the vertical displacement of end A and the displacement of B relative to C for a steel bar with varying cross-sectional areas under an applied load. - Another example problem determining the vertical movement of an applied load P for a rigid bar attached to vertical aluminum and steel rods. - A final example problem calculating the displacement of the end of a conical member suspended vertically due to its weight. Saint-Venant's principle and equations for stress, strain, displacement, and internal forces are also referenced throughout.

Uploaded by

Vanessa Aggabao
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 19

MECHANICS OF DEFORMABLE BODIES

AXIAL DEFORMATION
Prepared by:
ENGR. RANDY G. POLICARPIO
WORKING STRESS and FACTOR OF SAFETY
SAINT-VENANTS PRINCIPLE
SAINT-VENANTS PRINCIPLE
SAINT-VENANTS PRINCIPLE
ELASTIC DEFORMATION OF AN AXIALLY LOADED MEMBER
Bar having cross-sectional area that gradually varies along its length L

The stress and strain in the elements are


where
𝛿 − 𝑑𝑖𝑠𝑝𝑙𝑎𝑐𝑒𝑚𝑒𝑛𝑡 𝑜𝑓 𝑜𝑛𝑒 𝑝𝑜𝑖𝑛𝑡 𝑜𝑛 𝑡ℎ𝑒 𝑏𝑎𝑟 𝑟𝑒𝑙𝑎𝑡𝑖𝑣𝑒 𝑡𝑜 𝑡ℎ𝑒 𝑜𝑡ℎ𝑒𝑟 𝑝𝑜𝑖𝑛𝑡
𝐿 − 𝑜𝑟𝑖𝑔𝑖𝑛𝑎𝑙 𝑙𝑒𝑛𝑔𝑡ℎ 𝑜𝑓 𝑏𝑎𝑟
𝑃 𝑥 − 𝑖𝑛𝑡𝑒𝑟𝑛𝑎𝑙 𝑎𝑥𝑖𝑎𝑙 𝑓𝑜𝑟𝑐𝑒 𝑎𝑡 𝑡ℎ𝑒 𝑠𝑒𝑐𝑡𝑖𝑜𝑛, 𝑙𝑜𝑐𝑎𝑡𝑒𝑑 𝑎 𝑑𝑖𝑠𝑡𝑎𝑛𝑐𝑒 𝑥 𝑓𝑟𝑜𝑚 𝑜𝑛𝑒 𝑒𝑛𝑑
𝐴 𝑥 − 𝑐𝑟𝑜𝑠𝑠 − 𝑠𝑒𝑐𝑡𝑖𝑜𝑛𝑎𝑙 𝑎𝑟𝑒𝑎 𝑜𝑓 𝑡ℎ𝑒 𝑏𝑎𝑟, 𝑒𝑥𝑝𝑟𝑒𝑠𝑠𝑒𝑑 𝑎𝑠 𝑎 𝑓𝑢𝑛𝑐𝑡𝑖𝑜𝑛 𝑜𝑓 𝑥
𝐸 − 𝑚𝑜𝑑𝑢𝑙𝑢𝑠 𝑜𝑓 𝑒𝑙𝑎𝑠𝑡𝑖𝑐𝑖𝑡𝑦 𝑓𝑜𝑟 𝑡ℎ𝑒 𝑚𝑎𝑡𝑒𝑟𝑖𝑎𝑙
We assume that the stress caused by load 𝑃 is below the
Constant Load and Cross-Sectional Area proportional limit, 𝐻𝑜𝑜𝑘𝑒 ′ 𝑠 𝐿𝑎𝑤 is applicable.
𝜎 = 𝐸𝜖
Hence:
𝑃
𝜎=
𝐴
𝛿
𝜖=
𝐿
𝑃 𝛿
=𝐸
𝐴 𝐿

𝑃𝐿
𝛿=
𝐴𝐸
where:
𝛿 − 𝑡𝑜𝑡𝑎𝑙 𝑑𝑒𝑓𝑜𝑟𝑚𝑎𝑡𝑖𝑜𝑛
𝑃 − 𝑎𝑝𝑝𝑙𝑖𝑒𝑑 𝑙𝑜𝑎𝑑
𝐿 − 𝑜𝑟𝑖𝑔𝑖𝑛𝑎𝑙 𝑙𝑒𝑛𝑔𝑡ℎ 𝑜𝑓 𝑏𝑎𝑟
𝐴 − 𝑐𝑟𝑜𝑠𝑠 − 𝑠𝑒𝑐𝑡𝑖𝑜𝑛𝑎𝑙 𝑎𝑟𝑒𝑎
𝐸 − 𝑚𝑜𝑑𝑢𝑙𝑢𝑠 𝑜𝑓 𝑒𝑙𝑎𝑠𝑡𝑖𝑐𝑖𝑡𝑦
Example Problem: : Reference: Mechanics of Materials by R C Hibbeler
A-36 steel bar shown in 𝐹𝑖𝑔. 4 − 6𝑎 is made from two segments having cross-sectional area of
𝐴𝐴𝐵 = 1 𝑖𝑛2 and 𝐴𝐵𝐷 = 2 𝑖𝑛2 . Determine the vertical displacement of end 𝐴 and the displacement
of 𝐵 relative to 𝐶.

𝐹𝑟𝑒𝑒 − 𝐵𝑜𝑑𝑦 𝐷𝑖𝑎𝑔𝑟𝑎𝑚


Given:
𝐴𝐴𝐵 = 1 𝑖𝑛2
𝐴𝐵𝐷 = 2 𝑖𝑛2
𝐸 = 29,000 𝑘𝑠𝑖 (𝑓𝑜𝑟 𝑠𝑡𝑒𝑒𝑙)
Required:
a. 𝛿𝐴 − 𝑣𝑒𝑟𝑡𝑖𝑐𝑎𝑙 𝑑𝑖𝑠𝑝𝑙𝑎𝑐𝑒𝑚𝑒𝑛𝑡 𝑜𝑓 𝐴 𝑟𝑒𝑙𝑎𝑡𝑖𝑣𝑒 𝑡𝑜 𝐷
b. 𝛿𝐵𝐶 − 𝑣𝑒𝑟𝑡𝑖𝑐𝑎𝑙 𝑑𝑖𝑠𝑝𝑙𝑎𝑐𝑒𝑚𝑒𝑛𝑡 𝑜𝑓 𝐵 𝑟𝑒𝑙𝑎𝑡𝑖𝑣𝑒 𝑡𝑜 𝐶
Solution:
a. Solve for the internal forces, apply equilibrium condition
For Bar AB:
𝐹𝑦 = 𝑜 +
15 𝑘𝑖𝑝𝑠 − 𝑃𝐴𝐵 = 0
𝑃𝐴𝐵 = 15 𝑘𝑖𝑝𝑠 𝑇
For Bar BC:
𝐹𝑦 = 𝑜 +
15 𝑘𝑖𝑝𝑠 − 8 𝑘𝑖𝑝𝑠 − 𝑃𝐵𝐶 = 0
𝑃𝐵𝐶 = 7 𝑘𝑖𝑝𝑠 𝑇
For Bar CD:
𝐹𝑦 = 𝑜 +
15 𝑘𝑖𝑝𝑠 − 8 𝑘𝑖𝑝𝑠 − 16 𝑘𝑖𝑝𝑠 + 𝑃𝐶𝐷 = 0
𝑃𝐶𝐷 = 9 𝑘𝑖𝑝𝑠 𝐶
b. Solve for the displacement at A relative to D
𝑃𝐿
𝛿𝐴 =
𝐴𝐸

𝑃𝐴𝐵 𝐿𝐴𝐵 𝑃𝐵𝐶 𝐿𝐵𝐶 𝑃𝐶𝐷 𝐿𝐶𝐷


𝛿𝐴 = + +
𝐴𝐴𝐵 𝐸 𝐴𝐵𝐶 𝐸 𝐴𝐶𝐷 𝐸

12 𝑖𝑛 12 𝑖𝑛 12 𝑖𝑛
+15 𝑘𝑖𝑝𝑠 2 𝑓𝑡 +7 𝑘𝑖𝑝𝑠 1.5 𝑓𝑡 −9 𝑘𝑖𝑝𝑠 1 𝑓𝑡
1 𝑓𝑡 1 𝑓𝑡 1 𝑓𝑡
𝛿𝐴 = 𝑘𝑖𝑝 + 𝑘𝑖𝑝 + 𝑘𝑖𝑝
1 𝑖𝑛2 29000 2 2 𝑖𝑛2 29000 2 2 𝑖𝑛2 29000 2
𝑖𝑛 𝑖𝑛 𝑖𝑛

𝛿𝐴 = +0.0127 𝑖𝑛.

Since the result is positive, the bar elongates and so the displacement at A is upward
b. Solve for the displacement at B relative to C
𝑃𝐵𝐶 𝐿𝐵𝐶
𝛿𝐵𝐶 =
𝐴𝐵𝐶 𝐸

12 𝑖𝑛
+7 𝑘𝑖𝑝𝑠 1.5 𝑓𝑡
1 𝑓𝑡
𝛿𝐵𝐶 = 𝑘𝑖𝑝
2 𝑖𝑛2 29000 2
𝑖𝑛

𝛿𝐵𝐶 = +0.00217 𝑖𝑛.

Here B moves away from C, since the segment elongates.


Problem 213: Reference Strength of Materials by Singer and Pytel
The rigid bar AB, attached to two vertical rods as shown in the figure is horizontal before the load P
is applied. Determine the vertical movement of P if its magnitude is 50 𝑘𝑁.

C B
Solution:
a. Solve for the internal forces in the aluminum rod and steel rod.

For the Aluminum Rod. Apply equilibrium condition.


+ 𝑀𝐵 = 0
𝑃𝑎𝑙 6 𝑚 − 50 𝑘𝑁 2.5 𝑚 = 0
50 𝑘𝑁 2.5 𝑚
𝑃𝑎𝑙 =
6
𝑃𝑎𝑙 = 20.83 𝑘𝑁
For the Aluminum Rod. Apply equilibrium condition.
+ 𝑀𝐴 = 0
50 𝑘𝑁 3.5 𝑚 − 𝑃𝑠𝑡 6 𝑚 = 0
50 𝑘𝑁 3.5 𝑚
𝑃𝑠𝑡 = 6
𝑃𝑠𝑡 = 29.17 𝑘𝑁
` CHECK:
𝐹𝑦 = 0 +
𝑃𝑎𝑙 + 𝑃𝑠𝑡 = 50 𝑘𝑁
20.83 𝑘𝑁 + 29.17 𝑘𝑁 = 50 𝑘𝑁
50 𝑘𝑁 = 50 𝑘𝑁 𝑇ℎ𝑒𝑟𝑒𝑓𝑜𝑟𝑒 𝑶𝑲
b. Solve for the vertical movement of the aluminum rod 𝛿𝑎𝑙 and steel rod 𝛿𝑠𝑡
𝑃𝑎𝑙 𝐿𝑎𝑙 20.83 1000 𝑁 3 1000 𝑚𝑚
𝛿𝑎𝑙 = = 𝑁
𝐴𝑎𝑙 𝐸𝑎𝑙 500𝑚𝑚2 70000
𝑚𝑚2
𝛿𝑎𝑙 = 1.78 𝑚𝑚
𝑃𝑠𝑡 𝐿𝑠𝑡 29.17 1000 𝑁 4 1000 𝑚𝑚
𝛿𝑠𝑡 = = 𝑁
𝐴𝑠𝑡 𝐸𝑠𝑡 300𝑚𝑚2 200000
𝑚𝑚2
𝛿𝑠𝑡 = 1.94 𝑚𝑚
c. For the vertical movement of P, (𝛿)

C B
C B
𝛿 = 1.78 + 𝑦 {
By ratio and proportion:
𝑦 1.94−1.78
=
3.5 6
3.5
𝑦= 0.16 𝑚𝑚 = 0.093 𝑚𝑚
6
𝛿 = 1.78 𝑚𝑚 + 0.093 𝑚𝑚
𝛿 = 1.873 𝑚𝑚
Example Problem: : Reference: Mechanics of Materials by R C Hibbeler
A member is made from a material that has a specific weight 𝛾 and modulus of elasticity 𝐸. If it is in
the form of a cone having the dimensions shown in 𝐹𝑖𝑔. 4 − 9𝑎., determine how far its end is
displaced due to gravity when it is suspended in the vertical position.

Solution:

𝑥 𝑟𝑜
=
𝑦 𝐿
𝑟𝑜
𝑥= 𝑦
𝐿

𝐹𝑖𝑔. 4 − 9
𝐹𝑟𝑜𝑚 𝐹𝑖𝑔. 4 − 9𝑏

𝑃 𝑦 − 𝑊(𝑦) = 0
𝑃(𝑦) − 𝛾𝑉 = 0

You might also like