Quality Handling Systems Pty LTD: BR-SCB003
Quality Handling Systems Pty LTD: BR-SCB003
Quality Handling Systems Pty LTD: BR-SCB003
BR-SCB003
Features
The QHS Medium Series Cross Belt Sampler may appear similar to many other brands of Cross
Belt Sampler, but there are some important features that other brands do not often include :
The sample cutter is driven electro-mechanically through a 360 sample stroke. The
electro-mechanical drive ensures a constant cutting velocity is maintained through the
complete material stream being sampled.
The sample cutter is angled to match the angle of the resultant velocity of the belt and
cutter velocities. This ensures the cutter follows the sample cut path on the belt, to
maintain sample integrity.
Specially designed, belt profiling elements are used either side of the sampler to form the
conveyor belt to suit the radial path of the sample cutter.
The sample cutter is manufactured in stainless steel and is designed to push down on the
conveyor belt during the sample cut to ensure collection of fines from the belt.
A manual brake release system is provided for moving the cutter and drive for
maintenance.
Full safety guarding is
provided in compliance with
AS1755 and AS4024.1.
The frame, chutes and
covers on the sampler are
fabricated in stainless steel
All fasteners, including studs,
nuts, etc. are stainless steel.
Special designs are available
to suit unique materials or
requirements, e.g.
completely enclosed units for
sampling ultra fine material.