Chilled Water Fan Coil Unit

Model:HFWA
CFM 300~1400
The Best Choice for Comfort

=The Best Results
=The Best System
=The Best Fit

Quiet Comfort
Design for exposure mounting in office
Seven sizes to meet capacity
• Slope coil avoid air flow perpendicular or shop. HFWA is easily installed and requirements while minimizing the
impact ideal solution for new or replacement size fan coil needed
• Low noise permanent split capacitor applications.
One unit provides total comfort
motor requirements: both cooling and
• Metal fan wheel both statically and heating
dynamically balanced
Low height of just 244mm on all sizes
• Powder painted metal enclosure c/w for any applications
module type supply air grille and
keyholes for hangers shorten
installation time
• Quick delivery helps meet tight
installation schedules

Latest Perfection
• Cleaner, quieter and more efficient
fin design.

=Reliability
Trane’s history of innovation and
technology leadership led to quality
products making Trane a leader in the
air conditioning markets worldwide.
Trane’s commitment to customer’s
needs for quality, efficiency and
reliability is evident from the largest
chiller to smallest fan coil.

© American Standard Inc. 2004 2 HFWA-PRC001-EN

HFWA Model Nomenclature

H F W A 03 A N H 1 N A F B
1 2 3 4 5,6 7 8 9 10 11 12 13 14

DIGIT 1 - Position DIGIT 9 - Motor Type F = Long Galvanized Steel / 6mm Non-Flammable
H = Horizontal N = Normal Duty Without Temperature Cutout- BS476, PART7 Insulation
standard G = STD. SUS / 6mm Non-Flammable BS476, PART7
DIGIT 2 - Unit Type M = Normal Duty With Temperature Cutout Insulation
F = Fan Coil H = High Static Without Temperature Cutout H = Long SUS / 6mm Non-Flammable BS476, PART7
G = High Static With Temperature Cutout Insulation
DIGIT 3 - Casing I = Normal Duty Without Temperature Cutout/With Ball I = STD. Galvanized Steel / 10mm PE Insulation
W = Exposed (with powder casing) Bearing J = Long Galvanized Steel / 10mm PE Insulation
J = Normal Duty With Temperature Cutout/With Ball K = STD. SUS / 10mm PE Insulation
DIGIT 4 - Development Sequence Bearing L = Long SUS / 10mm PE Insulation
A = First E = High Static Without Temperature Cutout/With Ball M = STD. Galvanized Steel / 15mm PE Insulation
Bearing O = Long Galvanized Steel / 15mm PE Insulation
DIGIT 5.6 - Size / Nominal CFM F = High Static With Temperature Cutout/With Ball P = STD. Galvanized Steel / 9mm Non-Flammable
03 = 300 CFM Bearing BS476, Part7 Insulation
04 = 400 CFM S = Special Q = Long Galvanized Steel / 9mm Non-Flammable
06 = 600 CFM BS476, Part7 Insulation
08 = 800 CFM DIGIT 10 - Voltage/Hertz/Phase R = STD. SUS / 15mm PE Insulation
10 = 1000 CFM 1 = 220-240 / 50 / 1 T = Long SUS / 15mm PE Insulation
12 = 1200 CFM 2 = 220-240 / 60 / 1 U = STD. Galvanized Steel / 15mm Non-Flammable
14 = 1400 CFM 5 = 115 / 60 / 1 BS476, Part7 Insulation
S = Special V = Long Galvanized Steel / 15mm Non-Flammable
DIGIT 7 - Coil Row, Connection Side BS476, Part7 Insulation
A = 2 Row Cooling, Right Hand DIGIT 11 - Control Valve Package S = Special
B = 2 Row Cooling, Left Hand N = Standard Piping / Without Valve Package
C = 3 Row Cooling, Right Hand B = 2 Pipe System / With Single 2-Way 2 Position DIGIT 13 - Plenum / Filters
D = 3 Row Cooling, Left Hand Valve / Without Thermostat A = With Return Plenum / 4mm P.P Nylon Filter
E = 4 Row Cooling, Right Hand C = 2 Pipe System / With Single 2-Way 2 Position B = With Return Plenum / 12mm Aluminum Media
F = 4 Row Cooling, Left Hand Valve / With Cool Thermostat C = With Return Plenum / 12mm Foam Media
G = 2 Row Cooling, 1 Row Heating, Right Hand D = 2 Pipe System / With Single 2-Way 2 Position D = With Return Plenum / 20mm Aluminum Media
H = 2 Row Cooling, 1 Row Heating, Left Hand Valve / With Cool/Heat Thermostat E = With Return Plenum / 20mm Foam Media
J = 3 Row Cooling, 1 Row Heating, Right Hand E = 2 Pipe System / With Single 3-Way 2 Position F = With Return Plenum / No Filter
K = 3 Row Cooling, 1 Row Heating, Left Hand Valve / Without Thermostat G = With Return Plenum / 25mm Aluminum Media
S = Special F = 2 Pipe System / With Single 3-Way 2 Position I = With Return Plenum / 20mm P.P. Nylon Filter
Valve / With Cool Thermostat K = With Return Plenum / 12mm Non-Woven
DIGIT 8 - Electric Heat 115V / 220V (240V) G = 2 Pipe System / With Single 3-Way 2 Position L = With Return Plenum / 20mm Non-Woven
N = None Valve / With Cool/Heat Thermostat P = With Return Plenum / 25mm Foam Media
A = 1.0 kW(1.2 kW) Heater (Size 03~14) H = 4 Pipe System / With 2 Sets 2-Way 2 Position S = Special
B = 1.5 kW(1.8 kW) Heater (Size 04~14) Valve / Without Thermostat
C = 2.0 kW(2.4 kW) Heater (Size 06~14) I = 4 Pipe System / With 2 Sets 2-Way 2 Position DIGIT 14 - Design Sequence
D = 2.5 kW(3.0 kW) Heater (Size 08~14) Valve / With Cool/Heat Thermostat B = Second Change (Export)
E = 3.0 kW(3.6 kW) Heater (Size 08~14)
F = 3.5 kW(4.2 kW) Heater (Size 10~14) DIGIT 12 - Drain Pan Note:
G = 4.0 kW(4.8 kW) Heater (Size 12~14) A = STD. Galvanized Steel / 5mm PE Insulation 1. HFWA will not support sweat connection for
S = Special B = Long Galvanized Steel / 5mm PE Insulation standard piping.
C = STD. SUS/5mm PE Insulation 2. None-flammable PU insulation meet the regulation
D = Long SUS/5mm PE Insulation of BS476 part7 class1, Heater option meet BS476
E = STD. Galvanized Steel / 6mm Non-Flammable part6 class O.
BS476, PART7 Insulation
3 HFWA-PRC001-EN
Performance Data

Cooling Capacity (Example)

Cooling Capacity : kW Cooling Rows : 3 SH : Sensible Cooling Capacity, kW
EAT : 26.0˚C / 60.0% Motor Frequency : 50Hz WPD : Water Pressure Drop, M
ESP : 0 Pa TH : Total Cooling Capacity, kW WFR : Water Flow Rate, L / S

Nominal WTR Entering Water Temperature

Model Airflow 5˚C 7˚C 9˚C
(CMH) (˚C)
SH TH WFR WPD SH TH WFR WPD SH TH WFR WPD
3.0 3.19 5.17 0.41 7.60 2.86 4.43 0.35 5.74 2.54 3.65 0.29 4.03
03 509 5.0 2.92 4.55 0.22 2.47 2.59 3.78 0.18 1.77 2.30 3.02 0.14 1.18
7.0 2.62 3.85 0.13 1.02 2.32 3.10 0.11 0.69 2.06 2.39 0.08 0.44
3.0 4.81 7.81 0.62 21.93 4.32 6.72 0.53 16.63 3.84 5.57 0.44 11.80
04 678 5.0 4.45 7.02 0.33 7.35 3.97 5.87 0.28 5.31 3.52 4.74 0.23 3.60
7.0 4.08 6.13 0.21 3.20 3.63 5.02 0.17 2.23 3.22 3.97 0.14 1.45
3.0 5.32 8.58 0.68 9.38 4.78 7.35 0.58 7.06 4.24 6.05 0.48 4.96
06 1018 5.0 4.86 7.55 0.36 3.04 4.33 6.27 0.30 2.17 3.85 5.03 0.24 1.46
7.0 4.39 6.41 0.22 1.26 3.90 5.16 0.18 0.86 3.46 3.99 0.14 0.54
3.0 6.92 11.15 0.89 17.68 6.23 9.56 0.76 13.33 5.55 7.88 0.63 9.39
08 1357 5.0 6.38 9.90 0.47 5.80 5.69 8.24 0.39 4.16 5.06 6.63 0.32 2.81
7.0 5.81 8.55 0.29 2.48 5.19 6.97 0.24 1.72 4.62 5.48 0.19 1.12
3.0 8.42 13.48 1.07 4.87 7.56 11.50 0.91 3.64 6.71 9.40 0.75 2.53
10 1696 5.0 7.60 11.60 0.55 1.52 6.77 9.54 0.46 1.07 5.98 7.53 0.36 0.70
7.0 6.66 9.27 0.32 0.57 5.85 7.15 0.24 0.36 5.12 5.15 0.18 0.20
3.0 10.34 16.56 1.32 8.05 9.30 14.14 1.12 6.03 8.26 11.60 0.92 4.22
12 2036 5.0 9.41 14.41 0.69 2.56 8.40 11.93 0.57 1.82 7.46 9.53 0.45 1.21
7.0 8.43 12.03 0.41 1.03 7.48 9.56 0.33 0.68 6.62 7.25 0.25 0.42
3.0 11.19 17.92 1.43 14.15 10.06 15.06 1.24 11.51 8.93 13.15 1.05 8.21
14 2366 5.0 10.30 16.10 0.77 4.23 9.17 13.67 0.65 3.32 8.04 11.09 0.53 2.24
7.0 9.35 14.08 0.48 2.15 8.21 11.49 0.39 1.40 7.13 8.89 0.30 0.91

Spec./ Input Power

Model 03 04 06 08 10 12 14
Nominal Airflow (CMH) 509 678 1018 1357 1696 2036 2366
Input Power (Watts)*
Hi-Static Motor 97 110 162 200 286 324 400
Normal Motor 88 98 138 180 218 250 317
*Available with 115V/60Hz, 220V/50Hz, or 220V/60Hz
Options:

Heat Capacity Type (kW)
==
Hot Water 1Row 2.86 3.71 4.95 6.16 6.91 7.94 9.26
EWT=55˚C; EAT=21˚C; WFR=0.3L/S
==
Electric Sheathed Element 1.0 1.5 2 3 3.5 4 4
Available with high temperature cutout

Filters Filters-washable foam, PP nylon or aluminium
Note: It reserves the right to change design and specification without notice.

© American Standard Inc. 2004 4 HFWA-PRC001-EN

Dimension Data and Weight

Exposed type - With std. drain pan

With long drain pan

Note :
1. Dimensions in mm.
2. Right hand coil connection shown.
3. Wiring connection same side as coil and drain connections.
4. Wiring controls and junction box not supplied by Trane.

Size Out - Dimension (mm) Quantity Operating Weight (kg)

Model A A1 B B1 C D E E1 F F1 Fan Motor Std. drain pan Long drain pan
03 886 1127 844 1085 530 480 126.8 224.5 204.3 446 1 1 34 44
04 1127 1248 1085 1206 710 660 188.5 165 266 386.5 1 1 40 52
06 1248 1488 1206 1446 915 865 104 200 181.5 421.5 2 1 48 54.5
08 1610 1730 1568 1688 1200 1150 181 157 258.5 378.5 2 1 57 69
10 1730 1972 1688 1930 1370 1320 131 229 208.5 450.5 3 2 65 77
12 1972 2212 1930 2170 1620 1570 123 219 200.5 440.5 4 2 73 86
14 2092 2332 2050 2290 1700 1650 188 259 240.5 480.5 4 2 81 87.5

5 HFWA-PRC001-EN
Sound Power Level Connection / Piping

Motor Type Normal Hi-Static Model HFWA Coil Connections

Unit Speed Octave Band (dB) & Center Frequency (Hz) Octave Band (dB) & Center Frequency (Hz)
Model 63 125 250 500 1000 2000 4000 8000 63 125 250 500 1000 2000 4000 8000
High 38 51 48 47 44 43 39 34 43 57 54 54 49 50 39 40
03 Medium 33 46 43 42 39 38 34 29 37 51 48 48 43 45 34 34
Low 29 42 39 38 35 34 30 25 32 46 43 43 38 40 30 29
High 40 53 48 50 45 44 37 38 46 61 57 56 52 51 44 43
04 Medium 45 48 43 45 40 39 32 31 40 55 51 50 46 45 38 37
Low 41 44 39 41 36 35 38 27 35 50 46 45 41 40 33 32
High 44 57 52 53 48 47 40 39 48 61 59 58 54 53 44 42
06 Medium 39 52 47 48 43 42 35 34 42 55 53 52 48 47 38 36
Low 35 48 43 44 39 38 31 30 38 51 49 48 44 43 34 32
High 46 58 52 53 51 50 42 41 48 62 59 60 57 55 46 45
08 Medium 41 53 47 48 46 45 37 36 42 56 53 54 51 49 40 39
Low 37 49 43 44 42 41 33 32 38 52 49 50 47 45 36 35
High 47 60 56 55 53 51 44 44 51 64 61 60 59 55 47 46 Cooling & Heating Coil Connection Dimensions
10 Medium 42 55 51 50 48 46 39 39 45 58 55 54 53 49 41 40
2 Row Cooling
Low 38 51 47 46 44 42 35 35 40 53 50 49 48 44 36 35 Unit 3 Row ( )
High 48 62 57 56 52 51 44 46 52 65 61 61 57 58 46 47 1 Row Heating
Size
12 Medium 43 57 52 51 47 46 39 41 46 59 55 55 51 52 40 41 A B C D E F G H
Low 39 53 48 47 43 42 35 37 41 54 50 50 46 47 35 36 03~14
High 50 63 60 57 54 52 48 45 54 65 62 63 60 57 50 48
14 Medium 45 58 55 52 49 47 43 40 48 59 56 57 54 51 44 42 Left / 69.6 104.2 138.8 173.6 59.8 171.3 134.2 97
Right
Hand
Low 41 54 51 48 45 43 39 35 43 54 52 52 49 46 39 37
Notes: 3 Row Cooling
1. Data referenced to 10-12 watts. Unit 4 Row ( )
1 Row Heating
2. Above performance determined with both Normal static motor and Hi-static motor operating against 0 Size
Pa ESP (no ducting, ceiling material or other sound attenuating materials used). A B C D E F G H
03~14
Left / 68.1 58.4 115.9 183.1 58.6 158.6 158.6 108.6
Right
Hand

Wiring Diagram

Cooling Connection Dimensions

Unit 2 Row Coil 3 Row Coil 4 Row Coil

Size
A C E F A C E F A C E F
03~14
Left / 57 178 51 181 57 178 51 181 41 174 60 176
Right
Hand

Note:
1.Dimension in mm
2. 25.4 mm=1 in.

© American Standard Inc. 2004 6 HFWA-PRC001-EN

Product Specification Options

=General
=Coil
=Heater

• Fabricated with a rigid galvanized steel • The coil can have 2,3 or 4 rows, with Two types of heating device are
casing, the outside cabinet is with copper tubes mechanically bonded into available: hot water and electric
powder coating. slit aluminum fin collars. sheathed heating element. Please
• The DIDW centrifugal fans have • Water inlet / outlet connections are check technical data for such different
balanced, galvanized steel, and 3/4-inch female pipe thread (JIS B types of heating capacity.
forward curved blades. 0203-1966). Header assembly is a Meet Australia safety code AS 1668.1
• With each module air grille dimension one-piece casting, which enables to (Section 2.9), and AS 3102.
at 12cm square and modules aligment connect steel pipe directly.
to the unit length of supply air position, • Coil assembly is tested over 20 kg/cm2.
=Filters
it can be modifying airflow path at • A manual air vent is fitted with a drain

=S430(Standard) / S304(Option)
single or multiplex directions anytime line to the drain pan to avoid any water
on the field. drips when venting.
Stainless Steel Drain Pan
• The material of module air grille is • A water drain is located at the bottom
=Blue Fin
reinfored polystyrene(PS) that enables of the coil header. The blue fin with vinyl-epoxy-based
to suffer overheat deformation. coating that has been tested under
• The fan board and the top of coil
=Drain Pan ASTM B117, and thus of higher
casing have insulation of 6mm corrosion resistance than aluminum fin
The drain pan is 25mm depth with 0.8mm
thickness, 108 kg/m3 high-density non- thickness galvanized steel c/w internal stock.
flammable PU foam. epoxy resin coating.
• A return air plenum is available to the
=Factory-mounted Control Valve
For sure without leakage occur, the
unit, while filter is option. Package
• IEC 60335 safety certified. fabrication of drain pan by one-piece
stamping process with seamless and no Factory mounted and tested for options
of 2way or 3way control valve package,
joint. The standard insulation material is

=Motor and provision with or without thermostat.
5mm thickness, 27 kg/m3 density PE
• Motor is of permanent split capacitor
foam. The drain pan has one 3/4-inch
type for maximum efficiency and low
male pipe thread (JIS B 0203-1966)
=Trane Building Management
noise with sealed sleeve bearing and
connection. System
permanent lubrication.
The Tracer Summit™ system is
• The motor capacitor is totally enclosed
designed for monitoring and control air
in a metal shield, and attached to the
conditioning system, lighting and other
motor. The motor lead-out wires are
controllable devices for building.
enclosed by flexible metal conduit and
providing protection against damage. Such Building Control Unit (BCU)
• Optional ball bearing. manages all Unit Control Moduls (UCM)
• CE and CAS safety certified. for different zones management. Each
UCM performs scan on couples of
HFWA equips ZN controller in specific
zone and regularly report to the central
system.

7 HFWA-PRC001-EN
The Trane Fan Coil...
...Invented by Trane
...Perfected by Trane

Since 1885, Trane has been at the Over 60 years ago Trane produced the first
technological forefront of air conditioning. fan coil unit and in so doing created a
The company's pioneering spirit, product which is now built worldwide. The
commitment to research and pursuit of universal acceptance of this product has
quality have made it a world leader in the prompted Trane to focus the same
manufacture of water chillers. engineering experience to the fan coil as
given to the refrigeration products.

FM
38631
ISO 9001 Qualified factory - Trane Taiwan

North American Group Literature Order Number HFWA-PRC001-EN-1204

The Trane Company
File Number HFWA-TS-3
3600 Pammel Creek Road
La Crosse, Wl 54601-7599 Supersedes HFWA-PRC001-EN-0304

http : // www.trane.com Stocking location Taipei, Taiwan

Since The Trane Company has a policy of continuous product improvement, it reserves the right to change design and
An American-Standard Company specifications without notice.