Dpet BOQ - Afrer Visit p3

PROJECT : From Km 48+520 to Km 71+060
ROAD DESCRIPTION : Ahmedabad Dholera Expressway Length of Road : 22.540 Kms
ABSTRACT OF COST
Bill No. Description Amount INR %
g
1 SITE CLEARANCE e
5,474,676
2 EARTH WORK
1,073,720,930
2a EARTH WORK(Approaches)
455,584,086
3 SUB-BASE, BASE-COURSES
495,685,808
4 BITUMINOUS PAVEMENT COURSES 962,852,140
Subtotal for Highway 2,993,317,640 41
5 CROSS DRAINAGE WORKS
172,415,542 2
6A MAJOR,MINOR BRIDGES ,ROB,FLYOVERS ,OVERPASS & UNDERPASSES
FLYOVERS 2
253,562,870
VUP 5
209,977,263
LVUP 9
300,314,868
INTECHANGE STRUCTURES 1
29,184,801
MINOR BRIDGES 4
207,425,576
MAJOR BRIDGES 3;
1340m 1,636,897,353
6B R.E.Wall , Crashbarrier with Friction slab 5.736
km 582,064,393
Subtotal for Structures
3,219,427,124 44
7 TRAFFIC SIGNAGES, ROAD MARKING & APPURTENANCES
258,596,292
8 DRAINAGE AND PROTECTION WORKS
314,116,030
9 TRAFFIC MANAGEMENT SYSTEM
55,858,450
10 GENERAL ITEMS
5,527,900
11 WAYSIDE AMENITIES
12 TOLLPLAZA & RAMP PLAZA 1

Main 299,925,792
8
Subtotal for Misc. Ram
p 934,024,464 13
Effective GST 5%(Considering input Credit of 7%) on 1 to 6,8
i) CIVIL COST
7,319,184,770 100
ii Escalation @ 5% up to bid due date
iii) Total Civil Cost as on Bid due date

7,319,184,770
iv Contingencies @ 1%
TOTAL EPC Cost 7,319,184,770

COST PER KM (Rs in Crores) 32.47
v Centages(for Hybrid Annuity Projects*)
a IC & Pre operative expences @ 1% of EPC Cost
b Maintenance during development period
c Financing Cost Debt at 70:30 DER
d Interest durning construction
Total Centages -
vi Estimated Project Cost(cost of construction +centage) 7,319,184,770
vii Pre-Construction activities
a) Cost of land acquisition 1,059,700,000
b) shifting of Utilities 146,383,695
c) Environmental measures etc 73,191,847.70
Total(vii) 1,279,275,543
TOTAL CAPITAL COST (cost of construction + cost of Pre-construction activities+centage
charges) 8,598,460,313
Civil Cost per km

COST PER KM (Rs in Crores) 38.15
TOTAL LENGTH (Kms) 22.540
QTYS OF MAJOR ITEMS
Ril ZC consultant EXCVN EW GSB
5376468 1.79385958 5376468 ROAD 19502 4930530 128816
1381889660 -28.701008 1598772165 CD 34840.08
522,257,280 -14.634663 0 DP 11216
334914430 32.4341297 334914430 INT CHNG 644.11
603398003.65 37.3322259 603398003.65 LVUP/UTL 3665 12874

2,847,835,842 4.86021919 4.86021918976831
133119978 22.7911959 VUP 3,775.62
MJB 23,784.89
187292133.493604 26.1358205 168956688 MNB 6,287.66
141577244.405 32.5749644 67986700 FO 2,805
183735485.253145 38.8190513 133300100 TOTAL CUM 106520 4943404 128816
26211133.5982633 10.189096 42733738

126253269.726907 39.1332197 150212271
1060095404.664 35.2375149 1290462165.32
346519177.2 40.4672092 654070380
2,071,683,848 35.6505438 2507722042.32 M15 M20 M25
209975271.6 18.8019016 CD 1681 274
239062579.0053 23.8935437 DP 182 960
44686760 20 INT CHNG 36.42
4422320 20 LVUP/UTL 612 130.00

VUP 239 17
MJB 1,051.34
254936923.2 15
753,083,854 19.3721489 MNB 685.22 344.58

FO 137
5,805,723,522 20.678003 TOTAL CUM 4624 765 960
5,805,723,522 20.678003
5,805,723,522 20.678003 20.6780030257903

25.76
p3
32.47 25.76
7,319,184,770 5,805,723,522
146,383,695 117,106,956
7,465,568,465 5,922,830,478 zc 20.66471

117,106,956 1.32 7818136230.691 -4.72258431952
zc 5,922,830,478 5,922,830,478
qty 5% 5626688953.906
1.32 7427229419.156 7818136230.691
%ge 0.51 -4.72
0.25/0.2
0.7
4.90% 5.50% SQM SQM
WMM DBM BC PC TC FLYASH
153945 92455 27515 588416 1176832 2656446
RATES
murum 300
metal 918.727915 avg rate
crs sand 1590.10601
ns 2120.14134
TTL
153945 92455 27515 588416 1176832 2656446 rubble 494.699647
cement 375
steel 50000
HITENSION gsb 918.727915

M30 M35 M40/45 TMT ST WIRE FM/PIT wmm 1060.07067
10409 1070 17308
6000 857 89197.17
26.78 1055.89 43.28 248 14.18 94.93
741 16199 1778 2485
187.69 6,075.84 308.12 1115.81 11.65 3944.50 MATERIAL QTYS CUM/STEEL MT
173.25 32,430.31 14244.36 9,900.42 735.80 2003.73 EXCVN 106,520 100
219.28 5,393.95 556.17 1042.37 45.65 3107.55 MURUM 4943404 300

58 4,478 1471 1020 467 1178 FLY ASH 2656446 75
17815 65633 16623 17031 1274 119319 GSB 128816 900

WMM 153945 1000
DLC 0
PQC 0
DBM 92455 5500
r c ns cs metal BC 27515 5800
59659.44 864903.6 31925.92 31925.92 95777.75 PCCM15 4624 2800
gravel 59659.44 131967 PCC M20 765 3500
227744.8 RCC M25 960 4000
asp emlsn RCC M30 17815 6600
RCC M35 65632.67 6600
RCC M40 16622.89 7000
TMT 17031 50000
WIRES/PSC 1274.28 125000
PITCHING 119318.88 1200
130000
GSB
2600
4500
6000
2600
3000
CUM/STEEL MT
10652036 BRASS
1483021200 MURUM 1746786

199233450 METAL 161920.7
115934400 402731 SAND 22562.49

153945000 106419.73
0 509151
0
508502500
159587000
12947452 23120.45
2677780 4590.48
3840000 6720
117579000 124705
433175621 492245
116360214.6 132983.1
851566810 784364.1
159284437.5
143182656
4471489557
447.14895574
Item Description Unit Quantity Rate

No.
Bill No. 1 - SITE CLEARANCE
Clearing and grubbing road land in an area of light jungle by mechanical means
including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees
girth up to 300 mm, removal of stumps of trees cut earlier and disposal of
unserviceable materials and stacking of serviceable material to be used or auctioned, up
to a lead of 1000 metres including removal and disposal of top organic soil not
1.01 Hect 166.59 30207
exceeding 150 mm in thickness as per Technical specifications and as directed by the
Engineer-
in-charge.
Cutting of trees, including cutting of trunks, branches and removal of stumps,

roots, stacking of serviceable material with all lifts and up to a lead of 1000
metres and earth filling in the depression/pit as per Technical specifications and
1.02 as directed by the Engineer-in-charge.
a Girth from 300 mm to 600 mm nr 139 239

b Girth from 600 mm to 900 mm nr 82 404
c Girth from 900 mm to 1800 mm nr 281 820
d Girth above 1800 mm nr 92 1583
Dismantling of existing structures by Mechanical Means like culverts,
bridges, retaining walls and other structure comprising of masonry, cement
concrete, wood work, steel work, including T&P and scaffolding wherever
necessary, sorting the dismantled material, disposal of unserviceable material
1.03 and stacking the serviceable material with all lifts and lead as per Technical specifications
and as directed by the Engineer-
in-charge.
a Cement Concrete Grade M-15 & M-20 cum 0 414

b Prestressed / Reinforced cement concrete grade M-20 & above cum 595
c Dismantling Brick / Tile work in cement mortar cum 0 273
d Rubble stone masonry in cement mortar. cum 273
e Dismantling stone pitching/ dry stone spalls. cum 173
c Pipe/ Guard rails/ Edging Kerbs/Masonry Parapet/ Gutters and Fencing/ m 67
Hand railing
g Sign Boards nr 64
d Edging Kerbs & median Kerbs m 67
i W type crash barrier m 67
j line drain m 414
1.04 Removing all type of Hume Pipes and Stacking within a lead of 1000 metres
including Earthwork and Dismantling of Masonry Works all complete as per
Technical specifications and as directed by the Engineer-
in-charge.
a Up to 600 mm dia m 184

b 600 mm to 900 mm dia m 249
c Above 900 mm dia m 426
1.05 Dismantling of flexible pavements and disposal of dismantled materials up to a
lead of 1000 metres, stacking serviceable and unserviceable materials separately as
per Technical specifications and as directed by the
Engineer-in-charge.
a (a) Bituminous cum 227

b (b) Granular courses cum 446
1.06 Dismantling kerb stone by manual means and disposal of dismantled material with m 11
all lifts and up to a lead of 1000 metre as per Technical specifications and as
directed by the Engineer-in-charge.
1.07 Dismantling of kilometre stone including cutting of earth, foundation and disposal of
dismantled material with all lifts and lead upto 1000 m and back filling of pit as
per Technical specifications and as directed by the
Engineer-in-charge.
a 5th KM stone nr 343

b Ordinary KM Stone nr 205
c Hectometre Stone nr 41
Dismantling of barbed wire fencing / wire mesh fencing including posts, foundation
concrete, back filling of pit by manual means including disposal of dismantled
material with all lifts and up to a lead of 1000 metres, stacking serviceable
1.08 material and unserviceable material separately as per Technical specifications and m 0 46
as directed by the Engineer
in-charge.
1.09 Scarifying the existing bituminous road surface to a depth of 50 mm and Sqm 3
disposal of scarified material with in all lifts and leads.
Total for Bill No. 1 - SITE CLEARANCE
Amount
amt %ge wr wa
5,032,275 5032184.13 91.92 30200 5031018
- 0 0.00 0
33,125 33221 0.61 200 27800

33,209 33128 0.61 300 24600
230,748 230420 4.21 650 182650
145,319 145636 2.66 1200 110400
- 0 0.00 0
- 0 0.00 0
- 0 0.00 0
- 0 0.00 0
- 0 0.00 0
- 0 0.00 0
-
0 0.00 0
- 0 0.00 0
- 0 0.00 0
- 0 0.00 0
- 0 0.00 0
-
0 0.00 0
- 0 0.00 0
- 0 0.00 0
- 0 0.00 0
-
0 0.00 0
- 0 0.00 0
- 0 0.00 0
-
0 0.00 0
0 0.00 0
- 0 0.00 0
- 0 0.00 0
- 0 0.00 0
- 0 0.00 0
-
0 0.00 0
5,474,676
5474589.13 100.00 5376468
98.2077
Item No. Quantity

Description Unit Rate
BILL NO. 2 - EARTH WORK

Roadway Excavation necessary for construction of roadway complete
2.01 within all leads and lifts as per Technical specifications Clause no 301 and as directed by
the Engineer-in-charge.
a) In all types of Soil including marshy soil cum 19502 29
b) Rock
i) Ordinary Rock cum 39
ii) In Hard rock (requiring blasting) cum 195
iii) In Hard rock (blasting prohibited) cum 284
Construction of embankment with approved material obtained from borrow pits
with all lifts and leads, transporting to site, spreading, grading to required slope
and compacting to meet requirement of table 300-2.as per Technical specifications
2.02 and as directed by the Engineer-in- cum 4341844 170
charge.
Construction of embankment with approved materials deposited at site from roadway

cutting and excavation from drain and foundation of other structures graded and
compacted to meet requirement of table 300-2 as per Technical specifications and as
2.03 directed by the Engineer-in-charge. cum 75
Construction of embankment with fly ash conforming to Table 1 of IRC:SP:58-2001

obtained from coal or lignite burning thermal power stations as waste material,
spread and compacted in layer of 200 mm thickness each at OMC, with all lifts
2.04 and leads complete as specified in IRC:SP:58-2001 and as per drawing and as directed cum 2656446 77
by the engineer.
Construction of sub-grade and earthen shoulders with approved material

obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading
to required slope and compacted to meet requirement of table No. 300-2 as
2.05 per Technical specifications and as cum 588686 194
Turfing with sods of embankment slopes, verge, earthen shoulders and other
2.13 locations all complete as per Technical Specification Clause 307. sqm 581807 28
Total for BILL NO. 2 - EARTH WORK

amt %ge wr wa
Amount
565,547 565558 0.05 50 975100 3 4

0 0.00 0
- 0 0.00 0 300 140
- 0 0.00 0
- 0 0.00 0
738,113,432 738113480 68.74 240.00 1042042560

75 85 0
- 0 0.00 0
204,546,363 204546342 19.05 70 185951220
114,204,987 114205084 10.64 240.00 141284640

1056864906
16,290,602 16290596 1.52 20 11636140
1,073,720,930 1073721060 100.00 1381889660 128.701
5
72 232
175
15
2176072 1059040978
10590.41
Item No. Description Unit Quantity Rate
Bill No. 3 - SUB-BASE, BASE-COURSES

Construction of granular sub-base by providing close graded material as per
Table :400-1, mixing in a mechanical mix plant at OMC, carriage of mixed
Material to work site, spreading in uniform layers with motor grader on prepared
surface and compacting with vibratory power roller to achieve the desired density,
3.01 all complete as per Technical specifications and as directed by the Engineer-in-
charge.
a) Grading I cum 1665

b) Grading V cum 128816 1667
Construction of wet mix macadam by providing graded stone aggregate by
mechanical means including premixing of material with water at OMC in mechanical
mixer (Pug mill) carriage of mixed material to site, laying in uniform layers in sub-
base/base and compacting with vibratory rollers to achieve the desired density
3.02 including all material, labour, machinery lighting, barricading and maintenance of cum 153945 1825
diversion etc. complete as per Technical specifications and as directed by the
Engineer-in-charge.
Total for Bill No. 3 - SUB-BASE, BASE-COURSES

Amount
amt %ge wr wa
-
214,736,909 214736272 43.32 1130 145562080
280,948,900 280949625 56.68 1230 189352350
495,685,808 495685897 100.00 334914430 67.56586

Item No. Description Unit Quantity Rate
BILL NO. 4 - BITUMINOUS PAVEMENT COURSES / CEMENT CONCRETE PAVEMENT

Providing and applying Primer Coat with bitumen emulsion on prepared surface of
granular base including clearing of road surface and spraying primer at the rate of 0.70
kg/sqm using mechanical means all complete as per Technical specifications and as
4.01
sqm 588416 47
Providing and applying Tack Coat with bitumen emulsion using emulsion pressure
distributor at the rate of 0.25 kg /sqm on the prepared granular surface treated with
primer cleaned with mechanical broom all complete as per Technical specifications and as
4.02 (a)
sqm 588416 11
4.02 (b) Providing and applying Tack Coat with bitumen emulsion using emulsion pressure sqm 588416
distributor at the rate of 0.20 kg/sqm on the prepared nominal bituminous surface
cleaned with mechanical broom all complete as per 9
Technical specifications and as directed by the Engineer-in-charge.
Providing and laying Dense Graded Bituminous Macadam with 100-120 TPH batch type
HMP producing an average output of 75 tonnes per hour using crushed aggregates of
Grading-l as per Table 500-10, premixed with bituminous binder @ 4.9 per cent by weight of
total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher
with sensor control to the required grade, level and alignment, rolling with smooth
4.03 wheeled, vibratory and tandem rollers to achieve the desired compaction all complete as
per Technical specifications and as directed by the Engineer-in-charge.
VG-30 cum 6464 7005

VG-40 cum 85991 7552
Providing and laying Bituminous Macadam with 100-120 TPH hot mix plant producing an
average output of 75 tonnes per hour using crushed aggregates of specified grading premixed
with bituminous binder, transported to site, laid over a previously prepared surface with
paver finisher to the required grade, level and alignment and rolled as per clauses 501.6
4.04 and 501.7 to achieve the desired compaction all complete as per Technical specifications and cum 5698
as directed by the Engineer-in-charge.
Providing and laying Bituminous Concrete with 100-120 TPH batch type hot mix plant
producing an average output of 75 tonnes per hour using crushed aggregates of
grading-II, premixed with bituminous binder @ 5.5 per cent of mix and filler, transporting
the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to
the required grade, level and alignment, rolling with smooth wheeled, vibratory and
4.05 tandem rollers to achieve the desired compaction all complete as per Technical specifications cum
Clause 507 and as directed by the Engineer-in-charge.
VG-30 cum 4181 8182

VG-40 cum 23334 8337
Providing and laying 25 mm thick mastic asphalt wearing course with paving grade
bitumen meeting the requirements given in table 500-39, prepared by using mastic
cooker and laid to required level and slope after cleaning the surface, including
providing antiskid surface with bitumen precoated finegrained hard stone chipping
of 13.2 mm nominal size at the rate of 0.005cum per 10 sqm and at an approximate
4.06 spacing of 10 cm center to center in both directions, pressed into surface when the sqm 619
temperature of surfaces is not less than 1000C, protruding 1 mm to 4 mm over mastic surface,
all complete as
Total for BILL NO. 4 - BITUMINOUS PAVEMENT COURSES / CEMENT CONCRETE PAVEMENT
Amount
amt %ge wr wa
27,655,529 27655552 2.87 31.5 18535104

1.15 676.6784
6,472,571 6472576 0.67 7.5 4413120
5,295,740
5295744 0.55 8 4707328
0 0.00 0
45,281,021 45280320 4.70 4580 29605120

649,402,635 649404032 67.45 4580 393838780
- 0 0.00 0
0 0.00 0
34,212,215 34208942 3.55 5535.11 23142294.91 3135.11 5535.11

194,532,432 194535558 20.20 5535.11 129156256.74 3377.11 5777.11
- 0 0.00 0
962,852,140 962852724 100.00 603398003.65 62.66774

vg30 metal loading ldo
diesel operator trp to site paver n labrolling

880 500 430 170 0 200 0 0
950 225
70 25
bit
2400 4580
4580
4675
Item Quantity
No. Description Unit Rate
BILL NO. 5 - CROSS DRAINAGE WORKS

Earth work in excavation for foundation of structures in by mechanical means as
per drawing and technical specification, including setting out, construction of
shoring and bracing, removal of stumps and other deleterious matter, dressing
5.01 of sides and bottom and backfilling with approved material all complete as per
Technical specifications and as
a) In all types of Soil including marshy soil cum 27872 37

b) In Ordinary Rock cum 6968.08 45
c) In Hard Rock (Blasting Prohibited) cum 0.00 360
Back filling with granular material behind box culvert, wing walls and
5.02 return walls complete as per drawing and Technical Specification clause 710.1.4.of cum 8158 1405
IRC:78 & 305.4.4
Providing and laying of Filter media behind walls of box with granular
materials/stone crushed aggregates satisfying the requirements laid down in clause
2504.2.2. of MoRTH specifications to a thickness of not less than 600 mm with smaller
size towards the soil and bigger size towards the wall and provided over the entire
5.03 surface behind abutment, wing wall and return wall to the full height compacted to cum 9150 1362
a firm condition complete as per drawing and Technical specifications and as directed
by the Engineer-
in-charge.
Providing and laying Plain cement concrete in Levelling Course,

mechanically mixed and compacted, including centering and shuttering all complete as
5.04 per drawings and Technical specifications and as directed by 0
a PCC Grade M15 cum 1681 4288

b PCC Grade M20 cum 274 4786
Providing and laying Plain/Reinforced Cement Concrete in Foundation mechanically
mixed including centering and shuttering but excluding cost of reinforcement, all
5.05 complete as per drawing and Technical specifications 0
and as directed by the Engineer-in-charge.
a RCC Grade M20 cum 4684

b RCC Grade M20 cum 4684
c RCC Grade M25 cum 5079
d RCC Grade M30 cum 5092
e RCC Grade M35 cum 5178
Providing and laying Reinforced Cement Concrete in Substructure, mechanically
mixed and compacted, including centering and shuttering but excluding cost of
reinforcement, all complete as per drawings and Technical specifications and as
5.06 directed by the Engineer-in-charge. 0
a PCC Grade M20 cum 4954

a RCC Grade M30 cum 10409 5412
e RCC Grade M35 cum 5530
Providing and laying Reinforced cement concrete in super-structure including
centering and shuttering but excluding cost of reinforcement, all complete as per
5.07 drawing and Technical specifications and as directed by 0
Height up to 5m - For solid slab 0

a RCC Grade M25 cum 5829
Laying Reinforced cement concrete pipe NP4/prestressed concrete pipe for
culverts on first Class Granual Bedding in single row including fixing collar with
cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete
5.08 and masonry works in head walls and parapets all complete as per drawing and 0
Technical specifications and as directed by
a 900mm dia. (internal) m 229

b 1000mm dia. (internal) m 4200
a 1200mm dia. (internal) m 5900
Supplying, fitting and placing HYSD bar reinforcement all complete as per
5.09 drawing and Technical specifications and as directed by the Engineer-in- charge. 0
a For Foundation tonne 73894

b For Substructure tonne 1070 74043
b For Superstructure tonne 75060
Providing and laying Reinforced cement concrete of M30 grade for approach
slab including reinforcement and formwork all complete as per drawings and Technical
5.10 specifications and as directed by the Engineer-in- cum 8772
charge.
Providing and fixing the Tar paper bearing complete as per drawing and Technical
5.11 specifications and as directed by the Engineer-in-charge. sqm 424
Providing Weep Holes in Brick masonry/Plain/ Reinforced concrete abutment,

wing wall/ return wall with 100 mm dia PVC pipe, extending through the full
width of the structure with slope of 1V :20H towards drawing face. complete as
5.12 per Technical specifications clause 2706 and as directed by the Engineer-in-charge. nr 14998 185
Construction of precast RCC railing of M35 Grade, true to line and grade, tolerance of
vertical RCC post not to exceed 1 in 500, leaving adequate space between vertical
post for expansion, complete as per drawing and Technical specifications and as
5.13 directed by the Engineer-in-charge. m 1925
5.14 Providing and fixing filler type expansion joint in slab bridges and culverts m 1669
complete as per technical specification section 2600
Providing and fixing RCC Grade M10 Marker posts of dimensions as shown in Drawings
5.15 and as per Technical Specifications and as directed by the nr 1187
Engineer-in-charge
5.16 Providing and laying Filter material underneath pitching in slopes cum 1522
complete as per drawing and Technical specification
Providing and laying Pitching on slopes laid over prepared filter media including
5.17 boulder apron laid dry in front of toe of embankment complete cum 1636
as per drawing and Technical specifications
Providing and laying flooring laid over cement concrete bedding grade M- 15 complete
5.18 as per drawing and technical specifications Clause 1303 0
Rubble stone laid in PCC Grade M-15 cum 4150

Flexible Apron :Construction of flexible apron 750 mm thick comprising of loose stone
5.19 boulders weighing not less than 40 kg beyond curtain wall. cum 161 1729
Printing of culvert No. and span arrangement of any shade with synthetic enamel paint
black or any other approved colour to give an even shade as complete as per Technical
5.20 specifications and as directed by the Engineer- nr 44 63
in-charge.
Total for BILL NO. 5 - CROSS DRAINAGE WORKS

Amount amt %ge wr wa
1,031,275 1031264 0.60 60 1672320

313,563 313563.6 0.18 75 522606
- 0 0.00 0
11,462,301 11461990 6.65 1100 8973800
12,462,300 12462300 7.23 1300 11895000
0 0.00 0
7,209,213 7208128 4.18 3765 6328965

1,309,450 1311364 0.76 4001 1096274
-
0 0.00 0
- 0 0.00 0
- 0 0.00 0
- 0 0.00 0
- 0 0.00 0
- 0 0.00 0
- 0 0.00 0
- 0 0.00 0
- 0 0.00 0
- 0 0.00 0
56,335,808 56333508 32.68 4657 48474713
- 0 0.00 0
-
0 0.00 0
- 0 0.00 0
- 0 0.00 0
- 0 0.00 0
- 0 0.00 0
- 0 0.00 0
- 0 0.00 0
- 0 0.00 0
- 0 0.00 0
- 0 0.00 0
- 0 0.00 0
79,236,639 79226010 45.95 47810 51156700
- 0 0.00 0
-
0 0.00 0
- 0 0.00 0
2,774,630 2774630 1.61 200 2999600
- 0 0.00 0
-
0 0.00 0
- 0 0.00 0
-
0 0.00 0
- 0 0.00 0
- 0 0.00 0
- 0 0.00 0
277,591 278369 0.16 0
2,772
2772 0.00 0
172,415,542
172403898.6 100.00 133119978
77.21402
Item Description Unit Rate

No. Quantity
BILL NO.6 - New Bridges / Under Passes / Grade seperators/ ROBs.

6.00 Construction of Reinforced Earth structures (RES) complete as per
additional technical specification Appendix-I
a) Providing and erecting precast concrete fascia panels of M35 grade including
reinforcement, soil reinforcing element, foundation pad, all accessories,
components and draiange system including ground sqm 91770 4961
improvement complete.
b) Filling, grading and compaction with selected material meeting

approved design parameters in layers in reinforced zone complete. cum 490675 664
c)Construction of embankment with fly ash conforming to Table 1 of IRC:SP:58-
2001 obtained from coal or lignite burning thermal power stations as waste
material, spread and compacted in layer of 200 mm thickness each at OMC, with
all lifts and leads complete as specified in IRC:SP:58-2001 and as per drawing and as cum 1685397 77
directed by the engineer.
d) Providing and laying in position RCC crash barrier with friction slab,
including reinforcement and centering & shuttering, complete. m 10086 12571
Sub-Total for BILL NO.6 - New Bridges / Under Passes / Grade seperators/ ROBs.
STRUCTURES SUMMARY
I) FLYOVERS SUMMARY LS
II) VUP SUMMARY LS
III) LVUP SUMMARY LS
IV) INTERCHANGES
V) MINOR BRIDGES SUMMARY LS
VI) MAJOR BRIDGES SUMMARY LS
V) ROB SUMMARY LS
TOTAL COST
Amount
amt %ge wr wa
455,271,081 455270970 43.9 3000 275310000
325,808,483 325808200 31.4 240 117762000

2176072
129,775,603 129775569 12.5 240 404495280
126,793,312 126791106 12.2 7060.2 71209177.2

1,037,648,479 1037645845 100.0 868776457.2 83.72572
253,562,870 253,562,870 187292133.49361

209,977,263 209,977,263 141577244.405
300,314,868 300,314,868 183735485.25315
29,184,801 29,184,801 26211133.598263
207,425,576 207,425,576 126253269.72691
1,636,897,353 1,636,897,353 1060095404.664
- 0 0
2,637,362,731 2,637,362,731 1725164671.1409

No.
BILL NO.7 - TRAFFIC SIGNAGES, ROAD MARKING & APPURTENANCES
Construction of cement concrete kerb with channel with top and bottom width 115
and 165 mm respectively, 250 mm high in M 20 grade PCC on M10 grade foundation
150 mm thick, kerb channel 300 mm wide, 50 mm thick in PCC M20 grade, sloped
7.01 towards the kerb, kerb stone with channel laid with kerb laying machine, m 32350 233
foundation concrete laid manually, all
complete as per clause 409.
Construction of cement concrete kerb I-Shape Kerb Top width 150 mm and 350
7.02 mm high laid with kerb laying machine, foundation concrete laid m 157
manually, all complete as per clause 409.
7.03 Painting two coats on kerbs in black and white or yellow after filling the surface with sqm 63
synthetic enamel paint complete as per drawing and Technical specifications
Providing and fixing of retro- reflectorised cautionary, mandatory and

informatory sign as per IRC :67 made of high intensity grade sheeting vide clause
801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle
iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of
properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x
7.04 60 cm, 60 cm below ground level as per approved drawing all complete as per
Technical specifications and as directed by the Engineer-in-charge.
a 90 cm equilateral triangle nr 56 3903

a 60 cm circular nr 33 3505
c 80 cm x 60 cmm rectangular nr 4675
d 90 cm high octagon nr 5815
e 60 CM EQUI. TRIANGLE nr 176 2750
f 60CM X 45CM RECTANGULAR nr 3427
g 60CM X 60CM SQUARE nr 24 3962
h 60 cm high octagon nr 3609
Providing and erecting direction and place identification retro-
reflectorised sign as per IRC:67 made of high intensity grade sheeting vide clause
801.3, fixed over aluminium sheeting of 2 mm thick supported on a mild steel single
angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of
7.05 properly designed foundation with M15 grade cement concrete 45 x 45 x 60
cm, 60 cm below ground level as per approved drawing and all complete as per
Technical specifications and as
a Direction and Place Identification Signs upto 0.9 sqm Size Board. sqm 0 7765
b Direction and Place Identification Signs with size more than 0.9 sqm size sqm 45 8096
Board.
Providing and erecting overhead signs with a corrosion resistant 2mm thick
aluminium alloy sheet reflectorised with high intensity retro- reflective
sheeting of encapsulated lense type with vertical and lateral clearance given in
clause 802.2 and 802.3 and installed as per clause 802.6 over a designed support
system of aluminium alloy or galvanised steel trestles and trusses of sections
7.06 and type as per structural design requirements and approved drawings and all
complete as per Technical specifications and as directed by the Engineer-in-charge.
A Cantliever Gantry nr 4 110342

B Full Width Gantry nr 8 182945
Providing and laying of hot applied thermoplastic compound 2.5 mm thick including
reflectorising glass beads @ 250 gms per sqm area, thickness of
2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished
7.07 surface to be level, uniform and free from streaks and holes all complete as per
Technical specifications and as directed by the Engineer-
in-charge.
a Lane, Centreline, Edge and other marking along strips sqm 10057 376
b Directional arrows and letters sqm 111 376
c chevron marking and pedestrain crossing sqm 376
7.08 Reinforced cement concrete M15 grade kilometre stone of standard design as per
IRC:8-1980, fixing in position including painting and printing etc all complete as per
Technical specifications and as directed by the
Engineer-in-charge.
a 5th kilometre stone (precast) nr 14 3364
b Ordinary kilometer stone (precast) nr 62 2063
7.09 Reinforced cement concrete M15 grade boundary pillars of standard design as nr 480
per IRC:25-1967, fixed in position including finishing and lettering but
excluding painting all complete as per Technical
specifications and as directed by the Engineer-in-charge.
Supplying and installation of delineators (road way indicators, hazard markers,

object markers), 80-100 cm high above ground level, painted black and white in
15 cm wide strips, fitted with 80 x 100 mm rectangular or 75 mm dia circular
reflectorised panels at the top, buried or pressed into the ground and conforming
7.10 toIRC-79, all complete as per Technical specifications and as directed by the
Engineer-in-charge.
a Cluster of Red Reflectors. nr 2418

b Object Hazard Marker nr 133 992
c Delineators nr 166 992
Providing and erecting a thrie metal beam crash barrier comprising of 3 mm thick
corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC
series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high,
1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot
dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to
7.11 be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 m 39420 3404
mm long all complete as per Technical specifications and as directed by the
Engineer-in-charge.
7.12 Providing and fixing RCC M-30 grade in new jersey type crash barrier at Medians m 12672 3860
including reinforcement , centering, shuttering all complete as per Drawings and
Technical Specifications Clause 811, 1000 & 1600
Providing and fixing of road stud 100x 100 mm, die-cast in aluminium, resistant
to corrosive effect of salt and grit, fitted with lense reflectors, installed in
concrete or asphaltic surface by drilling hole 30 mm upto a depth of 60 mm
and bedded in a suitable bituminous grout or epoxy mortar, all as per BS 873
7.13 part 4:1973 all complete as per Technical specifications and as directed by the nr 948 595
Engineer-in-charge.
7.14 Providing, fitting and fixing mild steel railing complete as per drawing and m 2764
Technical Specification
Supply, install, test and commission 30m high mast pole with 4 x 400 watts
Metal Halide lanterns which can withstand forces exerted with wind speeds of
180 kmph with 3 seconds gust, dead weight stress and having high powered
electrically driven power tools for raising and lowering of lantern carriage,
7.15 aviation obstruction luminaries, earthing arrangements, all accessories, lamps, etc. nr 12 1798925
complete for safe working load of 850kg complete as per Technical specifications.
7.16 Supply, install, test and commission 9m high street light pole with 1 x 150 watts Metal nr 142 33925
Halide lanterns, earthing arrangements and all accessories, lamps, anchor bolts
etc. complete as per Technical specifications.
7.17 Supply, install, test and commission 9m high street light pole with 2 x 150 watts Metal nr 28 41809
Halide lanterns, earthing arrangements and all accessories, lamps, anchor bolts
etc. complete as per Technical specifications.
7.17A Solar Lighting Nr 250 125000

7.18 Planting and Maintaining of Flowering Plants and Shrubs Rm 20741 50
Sub-Total for BILL NO.7 - TRAFFIC SIGNAGES, ROAD MARKING & APPURTENANCES
Amount
amt %ge wr wa
7,537,550.00 7537550 390 12616500
- 0 0
-
0 0
- 0 0
218,568.00 218568 2500 140000

115,665.00 115665 3000 99000
- 0 3500 0
- 0 0
484,000.00 484000 2250 396000
- 0 0
95,088.00 95088 3300 79200
- 0 0
- 0 0
- 0 0
364,320.00
364320 7000 315000
- 0 0
441,368.00 441368 100000 400000

1,463,560.00 1463560 175000 1400000
- 0 0
3,781,601.20 3781432 400 4022800

41,597.61 41736 400 44400
- 0 0
-
0 0
47,096.00 47096 2500 35000
127,906.00 127906 1800 111600
-
0 0
- 0 0
- 0 0
131,936.00 131936 750 99750
164,672.00 164672 750 124500
134,185,680 134185680 2600 102492000
48,913,920.00
48913920 3100 39283200
564,060.00 564060 450 426600
-
0 0
21,587,100.00 21587100 1439140 17269680
4,817,353.64
4817350 27140 3853880
1,170,645.08
1170652 33447.2 936521.6
31,305,556 31250000 100000 25000000

1,037,050.00 1037050 40 829640
258,596,292 258540709 209975271.6 81.21555

No.
BILL NO.8 - DRAINAGE AND PROTECTION WORKS
Earthwork in excavation in all types of soil for construction and realignment
of drains,for pipes including disposal of surplus excavated earth with all leads and
8.01 lifts complete as per drawings and Technical
Specifications Clause 309 and 2903
i) Upto 3m depth cum 11216 29

Construction of open unlined trapezoidal drains, as per proper slope and dimension as
8.02 shown in drawing and technical specification clause 309. m 42
Plain cement concrete leveling course below Drain bottom and Walkway including
8.03 centering and shuttering all complete as per drawing and 0
Technical Specification Sections 1500 & 1700.
a PCC Grade M-10 cum 4156
b PCC Grade M-15 cum 182 4570
c PCC Grade M-20 cum 4977
a) Plain / Reinforced cement concrete M-25 grade for Covered drain including
centering and shuttering but excluding reinforcement and strands all complete
8.04 as per drawing and Technical Specification Clauses cum 960 5372
1500, 1700, 2100, 2200 & 2300.
b) Providing and laying Reinforced Cement Concrete in Substructure, mechanically

mixed and compacted, including centering and shuttering but excluding cost of
reinforcement, all complete as per drawings and Technical specifications and as
M-30 In retaining wall Cum 6000 5372

8.05 Providing and Fixing HYSD/TMT bar reinforcement complete as per tonne 857 73894
drawings and Technical Specification Section 1600.
8.06 Providing sand fill below drain and in walkway as per technical cum 1489
Specifications
Construction of semi-circular drainage chute in cement concrete M-15 with
foundation concrete as per drawings and Technical Specification Sections 1500 and
8.07 1700 including construction of bell mouth at entry. m 8813 997
8.08 Construction of energy dissipation basin and sumps in M-15 as per nr 621 1942
drawing and Technical Specification Section 1500 & 1700.
Construction of catchpits for median drains with cement concrete M-20 grade walls
and M-15 grade bedding and PVC pipe 150 mm dia for inlets all complete as per
8.09 drawing and Technical Specification Section 1500 & nr 6460
1700.
8.10 Stone pitching on slopes for erosion protection complete as per drawing
and technical specification section 2500.
(i) Stone Pitching cum 57391.94 1862
8.11 Filler material underneath stone pitching complete as per drawing and cum 31805.23 1773
technical specification section 2500.
Laying Reinforced Cement Concrete Pipe NP4 (IS 458) on first class bedding in
8.12 single row. Complete as per drawing and technical
specification section 2900.
a) 450 mm m 950
b) 900 mm m 4202
8.13 Providing weep holes in abutments, wing walls, retaining walls, return nr 430 185
walls etc. complete as per drawing and Technical Specification Clause
Providing, drilling and inserting 100 mm dia perforated PVC pipe wrapped with
geotextile as drainage pipes in hill slopes to be reinforced as per approved
8.14 drawings & Technical Specifications or as directed by the Lm 404
Engineer-in-charge.
Providing. laying and fixing of Non-woven PP geotextile over hill slopes to be stabilised,
including the cost of all materials. labour. equipments etc. required for the
8.15 completion of job as per Technical Specifications or as sqm 176269 72
directed by the Engineer-in-charge
G.I Barbed wire fencing 1.8m high (Providing and fixing1.8m high GI Barbed wire
fencing with 2.4 m angle iron posts 50 mm x 50 mm x 6 mm placed every 3 m center
to center founded in M15 grade cement concrete, 0.6 m below ground level,
every 15th post, last but one end post and corner post shall be strutted on both side and
8.16 end post on one side only and provided with 12 horizontal lines and 2 diagonals m 30010 492
interwoven
with horizontal wires, fixing with GI stapels, turn buckles etc complete as
8.17 Stone masonry work in cement mortar 1:6 in foundation complete as cum 2737 3743
drawing and Technical Specification.
Construction of boundary wall including earthwork, PCC, brick masonry in cement
mortar 1:3 with wire fencing over wall, providing opening and grating if necessary
and all necessary arrengment all complete as per drawing and technical specification
8.18 section 300, 1300 and 1700. Rm 500 2460
Sub-Total for BILL NO.8 - DRAINAGE AND PROTECTION WORKS

Amount
amt %ge wr wa
325,271 325264 0.10 75 841200

- 0 0.00 0
- 0 0.00 0
- 0 0.00 0
832,197 831740 0.26 3,765.00 685230
- 0 0.00 0
5,157,120 5157120 1.64 4,310.23 4137821.173145
- 0 0.00 0
32,232,000 32232000 10.26 6,055.23 36331382.33216

63,312,379
63327158 20.16 47,810.00 40973170
-
0 0.00 0
8,787,022 8786561 2.80 750 6609750
1,205,982
1205982 0.38 1700 1055700
- 0 0.00 0
-
0 0.00 0
106,863,791 106863792.28 34.02 1250 71739925
56,390,665
56390672.79 17.95 1350 42937060.5
- 0 0.00 0
- 0 0.00 0
- 0 0.00 0
79,550
79550 0.03 200 86000
- 0 0.00 0
12,691,385 12691368 4.04 60 10576140

14,764,920 14764920 4.70 450 13504500
10,243,748
10244591 3.26 3100 8484700
1,230,000 1230000 0.39 2200 1100000
314,116,030 314130719.07 100.00 239062579.0053 76.1029

Sl No. Description of item Unit Rate Quantity Quantity
FOUNDATION
Earth work in excavation for foundations, Pile Caps and floors of the bridges, retaining walls
etc.,including setting out, dressing of sides,ramming of bottom, getting out the excavated material,
disposal of surplus soil as directed, all types of shoring and strutting, bailing out of water from
6.01 excavated pit with all labour and material complete as per
drawing and technical specification as directed by Engineer.
a) Ordinary Soil Cum 41 934.32 934.32

b) Soft Rock Cum 50 -
c) Hard Rock Cum 360 -
Installing Bored cast in situ RCC piles of 1200 mm diameter and length below pile cap in M- 35 grade
Design Mix Cement Concrete using 20 mm graded crushed stone aggregate and coarse sand of
approved quality, to carry a safe working load not less than specified and length of pile to be
embedded in pile cap etc complete including provision of temporary liner as required, placing with
tremie pipe, breaking of pile head as required with exposing the reinforcement for pile cap, above cut off
6.02 level etc, pumping and bailing out water, with all labour material complete including cost of concrete but Lin. M 11292 400.00 400.00
excluding cost of reinforcement as per approved drawing, specification and direction of the
Engineer.
Length of the pile to be considered up to the bottom of pile cap from founding level.
Laying Plain Cement Concrete M-15 with graded stone aggregate of 40 mm nominal size, in
foundation and floors, retaining walls of bridges including mechanical mixing, vibrating, pumping
6.03 and bailing out water, curing where ever required with all materials complete including the cost of Cum 4,764.00 48.97 48.97
shuttering as per drawings and technical specifications as
directed by Engineer.
Laying in position Design mix concrete from batching plant, using 20 mm graded crushed stone
aggregate and coarse sand of approved quality using Admixtures in recommended proportions ( as per IS
9103), as per approved Mix design in RCC in raft foudations, Box structure and pile cap, at all levels
6.04 including vibrating. finishing, curing, materials, labour, P&M and shuttering but excluding cost of -
reinforcement etc complete as per
specifications and direction of the Engineer
b) M-35 grade Cum 5,754.00 645.98 645.98
SUBSTRUCTURE -
Laying in position Design mix concrete from batching plant, using 20 mm graded crushed stone aggregate
and coarse sand of approved quality using Admixtures in recommended proportions ( as per IS 9103), as
per approved Mix design in RCC substructure at all levels including vibrating, finishing curing, labour,
6.05 P&M and Shuttering but excluding cost -
of reinforcement complete as per specifications and direction of the Engineer
b) M-35 Grade Cum 6,145.00 389.63 389.63

SUPERSTRUCTURE -
per approved Mix design in RCC superstructure at all levels including vibrating, finishing, curing,
6.06 labour, P&M, and centring/shuttering and staging but excluding cost of reinforcement complete as per -
specifications and direction of
the Engineer
a) M-35 Grade Cum 6,577.00 234.08 234.08
b) M-40 Grade Cum 7,273.00 1.47 1.47
c) M-45 Grade Cum 7,842.00 83.62 83.62
Cutting, bending, placing, binding with binding wire FE 500 HYSD Reinforecement Steel (TMT Bars) at -
all levels including all materials,wastages,chairs, spacers, labour,binding wire, tools & tackles etc.
6.07
complete as per drawing.(Laps will be counted for reconciliation
purpose only)
a) Pile/ Foundation MT 82,105.00
b) Raft/ Pile Cap MT 82,105.00 156 155.71
c) Substructure MT 82,270.00 60 60.04
d) Superstructure MT 83,400.00 47 46.61
Fabricating & fixing in position to exact design profiles, prestressing H.T.S. cables of all classification
made from Low Relaxation strands conforming to IS 14268 – 1995 in Prestressed Concrete
girders/slabs etc. including supplying, cutting, making into cables with necessary spacers, colour
coding, protecting with water soluble oil at all time, anchoring of cables, supplying and placing HDPE
ducts sheathing confirming to IS-513 of required diameter/thickness, vent pipe, placing, bending,
routing, fixing, stressing & grouting of cable ducts with cement grout, Anchorage sets in required
6.08 MT 152376 3.79 3.79
number with provision for future prestressing, if any, including all lead and lift with contractor’s
own materials, labour, equipments, etc. complete as per drawings & specifications. Rate also includes
covering anchorage pads with epoxy mortar of approved quality to avoid
corrosion.
Supplying and laying Pitching with stone boulders weighing not less than 35 kg each with the voids
filled with spalls on slopes laid over prepared filter media including boulder apron laid dry in front of toe
6.09 of embankment complete as per drawing and Technical Cum 1,818.00 94.93 94.93
specifications (Filter media to be paid separately under the relevant item).
6.10 Supplying and fixing of Drainage Spouts of 100 mm UPVC complete as per drawing and Nos 1649 52.00 52.00
Technical specification
6.11 Supplying and laying Wearing course with 40mm Bituminous Concrete over 25mm Thk Sqm 945.00 872.10 872.10
Bitumen Mastic Layer with proper slope as per drawing and specification.
Laying in position Ready mix concrete from batching plant, M30 grade (Design Mix Cement
Concrete) using 20 mm graded crushed stone aggregate and coarse sand of approved quality
using Admixtures in recommended proportions ( as per IS 9103), as per approved Mix design in
6.12 approach slab at all levels including vibrating. finishing curing, including cost of all materials, labour, Cum 8,772.00 26.78 26.78
P&M but including cost of reinforcement and
shuttering complete as per specifications and direction of the Engineer
6.13 Providing and fixing filler type expansion joint in slab bridges and culverts complete as MT 1855 38.25 38.25
per technical specification section 2600
Fitting and fixing in position true to line and level POT-PTFE bearing consisting of a metal piston
supported by a disc or un reinforced elastomer confined within a metal cylinder, sealing rings, dust
seals, PTFE surface sliding against stainless steel mating surface, complete assembly to be of cast
steel / fabricated structural steel, metal and elastomer elements complete as per IS 2062, IS: 1030,
AISI:304, AISI:316, IS:6911, BS:3784, IS:3400, IS:226, BS 5400.,Bridge code and as per drawing
6.14 and approved Technical Specifications including grouting. The design of the bearings shall be -
submitted by the manufacturers/ contractor and got approved from Authority before fixing. Test
report of the bearings should be got approved before the materials are lifted from the manufacturer
premises.
a (Up to Capacity -250 MT) Nos 14130 10 10.00

Supplying, fitting and fixing in position true to line and level elastomeric bearing
conforming to IRC: 83 (Part-II) section IX and clause 2005 of MoRTH specifications complete including all cucm 1.36 -
accessories as per drawing and Technical Specifications.
6.15 Providing and laying in position RCC crash barrier with friction slab, including Lin. M 3957 136.80 136.80
reinforcement and centering & shuttering, complete.
Supplying and laying of filter media consisting of granular materials of GW, GP, SW groups as per IS Cum 1513 426.25 426.25
1498-1970 in required profile including filling of Boulders behind abutments, wing walls / return walls etc
6.16
above bed level with all labour and material
complete job as per drawing and technical specification.
Supplying and fixing of weep holes in Plain/ Reinforced concrete abutment, wing wall/ return wall with 100
6.17 mm dia AC pipe, extending through the full width of the structure Nos. 205 138.00 138.00
complete as specified.
SUBTOTAL
Amount
amt %ge wr wa
38,307 38307.12 0.100706 50 46716

- 0
- 0 10300
4,516,800 4516800 11.87425 11292 4516800
233,275 233293.08 0.613306 3,765.00 184372.05
- 0
3,716,940 3716968.92 9.771565 6,070.23 3921247.42649

- 0
- 0
2,394,273 2394276.35 6.294329 6,070.23 2365143.86635

- 0
- 0
1,539,511 1539544.16 4.047318 6,070.23 1420919.52939

10,691 10691.31 0.028106 6070.23039 8923.23867138
655,755 655748.04 1.7239 6070.23039 507592.665102
-
0
- 0 0 0
12,784,312 12784569.55 33.60944 47,810.00 7444495.1
4,939,297 4939490.8 12.98546 47810 2870512.4
3,887,419 3887274 10.21928 47810 2228424.1
577,240 577505.04 1.518207 106663.2 404253.528
172,580 172582.74 0.453704 1272.6 120807.918

85,748
85748 0.225423 1154.3 60023.6
824,135
824134.5 2.166573 661.5 576894.15
234,870 234914.16 0.617567 6140.4 164439.912
70,954
70953.75 0.186531 1298.5 49667.625
- 0 0
141,300 141300 0.371465 9891 98910

- 0 0.952
541,318
541317.6 1.423074 2769.9 378922.32
644,919
644916.25 1.695425 1059.1 451441.375
28,290 28290 0.074372 143.5 19803

38,037,934
38038625.37 100 27840309.804
73.18958
Sl No. Description of item Unit Rate 67+216
FOUNDATION
Earth work in excavation for foundations, Pile Caps and floors of the bridges, retaining walls
etc.,including setting out, dressing of sides,ramming of bottom, getting out the excavated material,
disposal of surplus soil as directed, all types of shoring and strutting, bailing out of water from excavated pit
6.01 with all labour and material complete as per drawing
and technical specification as directed by Engineer.
a) Ordinary Soil Cum 41 644.11

b) Soft Rock Cum 50
c) Hard Rock Cum 360
Installing Bored cast in situ RCC piles of 1200 mm diameter and length below pile cap in M- 35 grade
Design Mix Cement Concrete using 20 mm graded crushed stone aggregate and coarse sand of approved
quality, to carry a safe working load not less than specified and length of pile to be embedded in pile cap etc
complete including provision of temporary liner as required, placing with tremie pipe, breaking of pile head
as required with exposing the reinforcement for pile cap, above cut off level etc, pumping and bailing out
6.02 water, with all labour material complete including cost of concrete but excluding cost of reinforcement as Lin. M 11292 400.00
per approved drawing, specification and direction of the Engineer. Length of the pile to
be considered up to the bottom of pile cap from founding level.
Laying Plain Cement Concrete M-15 with graded stone aggregate of 40 mm nominal size, in foundation
and floors, retaining walls of bridges including mechanical mixing, vibrating, pumping and bailing out
6.03 water, curing where ever required with all materials complete including the cost of shuttering as per Cum 4,764.00 36.42
drawings and technical specifications as directed
by Engineer.
per approved Mix design in RCC in raft foudations, Box structure and pile cap, at all levels including
6.04 vibrating. finishing, curing, materials, labour, P&M and shuttering but excluding cost of reinforcement
etc complete as per
specifications and direction of the Engineer
b) M-35 grade Cum 5,754.00 535.46
SUBSTRUCTURE
and coarse sand of approved quality using Admixtures in recommended proportions ( as per IS 9103),
as per approved Mix design in RCC substructure at all levels including vibrating, finishing curing,
6.05 labour, P&M and Shuttering but excluding cost
of reinforcement complete as per specifications and direction of the Engineer
b) M-35 Grade Cum 6,145.00 358.28

SUPERSTRUCTURE
per approved Mix design in RCC superstructure at all levels including vibrating, finishing, curing,
6.06 labour, P&M, and centring/shuttering and staging but excluding cost of reinforcement complete as per
specifications and direction of
the Engineer
a) M-35 Grade Cum 6,577.00 162.15
b) M-40 Grade Cum 7,273.00 1.47
c) M-45 Grade Cum 7,842.00 41.81
Cutting, bending, placing, binding with binding wire FE 500 HYSD Reinforecement Steel (TMT Bars) at
all levels including all materials,wastages,chairs, spacers, labour,binding wire, tools & tackles etc.
6.07 complete as per drawing.(Laps will be counted for reconciliation
purpose only)
a) Pile/ Foundation MT 82,105.00
b) Raft/ Pile Cap MT 82,105.00 154
c) Substructure MT 82,270.00 55
d) Superstructure MT 83,400.00 39
Fabricating & fixing in position to exact design profiles, prestressing H.T.S. cables of all classification
made from Low Relaxation strands conforming to IS 14268 – 1995 in Prestressed Concrete
girders/slabs etc. including supplying, cutting, making into cables with necessary spacers, colour
coding, protecting with water soluble oil at all time, anchoring of cables, supplying and placing HDPE
ducts sheathing confirming to IS-513 of required diameter/thickness, vent pipe, placing, bending,
routing, fixing, stressing & grouting of cable ducts with cement grout, Anchorage sets in required
6.08 MT 152376 14.18
number with provision for future prestressing, if any, including all lead and lift with contractor’s own
materials, labour, equipments, etc. complete as per drawings & specifications. Rate also includes covering
anchorage pads with epoxy mortar of approved quality to avoid
corrosion.
Supplying and laying Pitching with stone boulders weighing not less than 35 kg each with the voids
filled with spalls on slopes laid over prepared filter media including boulder apron laid dry in front of toe
6.09 of embankment complete as per drawing and Technical Cum 1,818.00 94.93
specifications (Filter media to be paid separately under the relevant item).
6.10 Supplying and fixing of Drainage Spouts of 100 mm UPVC complete as per drawing and Nos
Technical specification 1649 36.00
6.11 Supplying and laying Wearing course with 40mm Bituminous Concrete over 25mm Thk Sqm
Bitumen Mastic Layer with proper slope as per drawing and specification. 945.00 585.23
Laying in position Ready mix concrete from batching plant, M30 grade (Design Mix Cement
Concrete) using 20 mm graded crushed stone aggregate and coarse sand of approved quality using
Admixtures in recommended proportions ( as per IS 9103), as per approved Mix design in approach slab
6.12 at all levels including vibrating. finishing curing, including cost of all materials, labour, P&M but Cum 8,772.00 26.78
including cost of reinforcement and
shuttering complete as per specifications and direction of the Engineer
6.13 Providing and fixing filler type expansion joint in slab bridges and culverts complete as per MT
technical specification section 2600 1855 25.50
Fitting and fixing in position true to line and level POT-PTFE bearing consisting of a metal piston
supported by a disc or un reinforced elastomer confined within a metal cylinder, sealing rings, dust
seals, PTFE surface sliding against stainless steel mating surface, complete assembly to be of cast
steel / fabricated structural steel, metal and elastomer elements complete as per IS 2062, IS: 1030,
AISI:304, AISI:316, IS:6911, BS:3784, IS:3400, IS:226, BS 5400.,Bridge code and as per drawing
6.14 and approved Technical Specifications including grouting. The design of the bearings shall be
submitted by the manufacturers/ contractor and got approved from Authority before fixing. Test report of
the bearings should be got approved before the materials are lifted from the manufacturer
premises.
a (Up to Capacity -250 MT) Nos 14130 10

Supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to IRC: 83
(Part-II) section IX and clause 2005 of MoRTH specifications complete including cucm 1.36
all accessories as per drawing and Technical Specifications.
6.15 Providing and laying in position RCC crash barrier with friction slab, including Lin. M
reinforcement and centering & shuttering, complete. 3957 91.80
Supplying and laying of filter media consisting of granular materials of GW, GP, SW groups as per IS 1498-
1970 in required profile including filling of Boulders behind abutments, wing walls / return walls etc above
6.16 bed level with all labour and material Cum 1513 425.48
complete job as per drawing and technical specification.
Supplying and fixing of weep holes in Plain/ Reinforced concrete abutment, wing wall/ return wall with 100
6.17 mm dia AC pipe, extending through the full width of the structure Nos. 205 137.00
complete as specified.
SUBTOTAL
Amount
%ge wr wa
26,409 50 32205.5
- 0
- 0
4,516,800 10500 4200000
173,510 3,765.00 137121.3

3765
- 0
2,464,838 6,055.23 3242348.80201

- 0
- 0
1,761,267 6055.23038869 2169437.66751

- 0
- 0
1,066,481 6055.23038869 981855.607527

10,691 6055.23038869 8901.18867138
327,877 6555.23038869 274074.182551
- 0
0
10,104,336 47,810.00 7350787.5
3,583,335 47,810.00 2629550
2,617,094 47,810.00 1852637.5
288,620 125000 1771875
172,580 1200 113916
59,364 1250 45000

553,038 650 380399.5
234,870 6140.4 164439.912
47,303 1298.5 33111.75

- 0 0
141,300 9891 98910

- 0.952 0
363,253 2769.9 254276.82
643,753 1059.1 450625.868
28,085 143.5 19659.5

29,184,801 26211133.5983 89.8109
Item Description Unit Estimated LVUP Qty Rate
No. Quantity (1x10.5x4)
BILL NO.6 - New Bridges / Under Passes / Grade seperators/ ROBs.
Earth work in excavation for foundation of structures in ordinary soil
by mechanical means as per drawing and technical specification,
including setting out, construction of shoring and bracing, removal of
stumps and other deleterious matter, dressing of sides and bottom and
6.01 backfilling with approved material all complete as per Technical
a) Ordinary Soil - Depth Upto 3m cum 3665 3665 41

b) Ordinary Rock - (not requiring blasting) cum 0 50
c) Hard rock (blasting prohibited) cum 0 360
Backfilling behind abutment, wing wall, retaining wall, breast wall and
return wall complete as per drawings & technical specifications
6.02 Clause 710.1.4.of IRC:78 & Technical cum 10401 10401 1562
specification clause 305.4.4.
Providing and laying filter media with granular crushed aggregates
as per specification to a thickness of not less than 600 mm with smaller
size towards the soil and bigger size towards the wall and providing over
the entire surface behind abutment, wing wall, return wall to the full height,
6.03 cum 2485 2485 1513
compacted to firm condition complete as per drawing and
technical
specification Clause 2504.

mechanically mixed and compacted, including centering and
6.04 shuttering all complete as per drawings and Technical specifications 0
and as directed by the Engineer-in-
charge.
PCC Grade M15 cum 612 612.00 4764

PCC Grade M20 cum 130 130.00 5540
Providing and laying Reinforced Cement Concrete in Foundation
mechanically mixed including centering and shuttering but excluding
6.05 cost of reinforcement, all complete as per drawing and Technical 0
specifications and as directed by
a) RCC Grade M30 cum 0

b) RCC Grade M35 cum 7616 6092.80 5754
Providing and laying Reinforced Cement Concrete in
Substructure, mechanically mixed and compacted, including centering
and shuttering but excluding cost of reinforcement, all complete as per
6.06 drawings and Technical specifications and as directed by the Engineer-in- 0 0
charge.
a) RCC Grade M30 cum 0 6014

b) RCC Grade M35 cum 5353 4282 6145
Providing and laying Reinforced cement concrete in superstructure
including centering and shuttering but excluding cost of reinforcement, all
6.07 complete as per drawing and Technical specifications and as directed by 0
a) RCC Grade M25 cum 0 6477

b) RCC Grade M30 cum 0 6568
c) RCC Grade M35 cum 3230 2584 6577
d) RCC/PSC Grade M40 cum 0 7273
e) RCC/PSC Grade M45 cum 0 7842
f) RCC/PSC Grade M50 cum 0 8626
Supplying, fitting and placing HYSD bar reinforcement all
6.08 complete as per drawing and Technical specifications and as directed by the 0 0
Engineer-in-charge.
a) For Foundation tonne 838 670 82105
b) For Substructure tonne 585 468 82270
c) For Superstructure tonne 355 284 83400
High tensile steel wires / strands including all accessories for
stressing, stressing operations and grouting complete as per drawing
6.09 and Technical Specifications and as directed by the Engineer-in-charge. tonne 0 152376
Supplying, fitting and fixing in position true to line and level

POT/PTFEE bearing conforming to IRC: 83 (Part-III) section IX and
clause 2006 of MoRTH specifications complete including all
6.10 accessories as per drawing and Technical Specifications as directed 0
by the Engineer-in-charge.
a) 85 tonnes nr 0 7913
b) 140 tonnes nr 0 4804
c) 205 tonnes nr 0 11587
d) 250 tonnes nr 0 14130
e) 400 tonnes nr 0 22608
elastomeric bearing conforming to IRC: 83 (Part-II) section IX and
6.11 clause 2005 of MoRTH specifications complete including all cucm 0 1
accessories as per drawing and Technical
Specifications.
Providing and laying Reinforced cement concrete of M30 grade

for approach slab including reinforcement and formwork all
6.12 complete as per drawings and Technical cum 741 592.80 9746
Construction of precast RCC railing of M35 Grade, true to line and
grade, tolerance of vertical RCC post not to exceed 1 in 500, leaving
adequate space between vertical post for expansion, complete as
6.13 per drawing and Technical specifications and as directed by the m 0 2139
Engineer-in-charge.
Provision of an Reinforced cement concrete crash barrier constructed

with M-40 grade concrete with HYSD reinforcement conforming
to IRC:21 and dowel bars 25 mm dia, 450 mm long at expansion
joints filled with pre-moulded asphalt filler board, keyed to the structure
on which it is built and installed as per design given in the enclosure
to MOST circular No. RW/NH - 33022/1/94-DO III dated 24 June 1994 as
6.14 per dimensions in the approved drawing and at locations directed by m 796 796 3957
the Engineer, complete as per drawing and Technical specifications
clause 2703 and as directed by the Engineer-in-charge.
Construction of Reinforced Earth structures (RES) complete as per

6.15 additional technical specification Appendix-I 0 0
a) Providing and erecting precast concrete fascia panels of M35

grade including reinforcement, soil reinforcing element, foundation pad,
all accessories, components and draiange system including ground sqm 3245 3245 4961
improvement complete.
b) Filling, grading and compaction with selected material

meeting approved design parameters in layers in reinforced zone cum 2473 2473 664
complete.
c) Providing and laying in position RCC crash barrier with
friction slab, including reinforcement and centering & shuttering, m 0 15455
complete.
Providing and fitting Drainage Spouts complete as per drawing
6.16 and Technical specifications and as directed by the nr 66 66 1649
Engineer-in-charge.
Providing and fixing filler type expansion joint in slab
6.17 bridges and culverts complete as per technical specification section m 0 1855
2600
Providing and laying of Asphaltic Plug joint to provide for horizontal
movement of 25 mm and vertical movement of 2 mm, depth of joint
varying from 75 mm to 100 mm, width varying from 500 mm to 750 mm
(in traffic direction), covered with a closure plate of 200mm x 6mm of
wieldable structural steel conforming to IS: 2062, asphaltic plug to
consist of polymer modified bitumen binder, carefully selected single
6.18 size aggregate of 12.5 mm nominal size and a heat resistant foam m 0 1202
caulking/backer rod, all as per approved drawings and specifications.
Providing and laying of a strip seal expansion joint catering to maximum

horizontal movement upto 70 mm, complete as per approved drawings
and standard specifications to be installed by the
6.19 manufacturer/supplier or their authorised representative ensuring m 0 15290
compliance to the manufacturer's instructions for installation.
Providing weepholes in brick masonry/stone masonry,

plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia
PVC pipe extending through the full width of the structures with slope
6.20 of 1(V):20(H) towards drawing face complete as per drawing and cum 3908 3908 205
technical specifications Clause
2200 & 2706
Providing and laying 65 mm wearing course on top of deck slab

consisting of 25 mm thick mastic asphalt wearing course and 40 mm thick
Bituminous concrete laid to required level and slope after cleaning the
surface, including providing antiskid surface with bitumen precoated
finegrained hard stone chipping of 13.2 mm nominal size at the rate of
0.005cum per 10 sqm and at an approximate spacing of 10 cm center
6.21 to center in both directions, pressed into surface when the sqm 3176 3176 945
temperature of surfaces is not less than 1000C, protruding 1 mm to 4
mm over mastic surface, all complete as per clause 507 and 516.
Providing and laying Filter material underneath pitching in slopes

6.22 complete as per drawing and Technical specification cum 0 1513
Providing and laying Pitching on slopes laid over prepared filter media
including boulder apron laid dry in front of toe of embankment complete
6.23 as per drawing and Technical cum 0 1818
specifications
Providing and laying flooring laid over cement concrete bedding
6.24 grade M-15 complete as per drawing and technical 0
specifications Clause 1303
Rubble stone laid in PCC Grade M-15 cum 0 4195
Flexible Apron :Construction of flexible apron 750 mm thick comprising
6.25 of loose stone boulders weighing not less than 40 cum 0 1922
kg beyond curtain wall.
Providing and laying of boulder apron laid in wire crates made with
4mm dia GI wire conforming to IS: 280 & IS:4826 in 100mm x 100mm
6.26 mesh (weaved diagonally) including 10% extra for laps and joints laid with cum 0 2322
stone boulders weighing not
less than 40 kg each.
Clearing grass and removal of the rubbish up to a distance of 50 m outside
6.27 the periphery of the area cleared. sqm 0 3
Bored cast-in-situ M35 grade R.C.C. pile excluding

reinforcement complete as per drawing and technical
6.28 specifications and removal of excavated earth with all lifts and metre 0 11292
lead upto 1000 m. (Pile diameter-1200 mm)
Printing of Bridge No. and span arrangement of any shade with synthetic
enamel paint black or any other approved colour to give an even
6.29 shade as complete as per Technical specifications and as directed nr 0 70
Structure Cost LS
Sub-Total for BILL NO.6 - New Bridges / Under Passes / Grade seperators/ ROBs.
Amount
%ge wr wa
150,265.00 0.05003582 75 274875

- 0
- 0
16,246,362.00 5.40977612 1093.4 11372453.4
3,759,805.00 1.25195433 1059.1 2631863.5
- 0
2,915,568.00 0.97083705 3,765.00 2304180

720,200.00 0.23981497 4265 554450
- 0
- 0
43,822,464.00 14.5921726 6,055.23 36893307.71223
- 0
- 0
32,894,185.00 10.9532323 6055.23039 25930918.61654
- 0
- 0
- 0
21,243,710.00 7.07381228 6055.23039 15646715.32438
- 0
- 0
- 0
- 0
68,803,990.00 22.9106173 47,810.00 32051824
48,127,950.00 16.0258299 47810 22375080
29,607,000.00 9.85865275 47810 13578040
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
7,221,786.00 2.40473808 4657 2760669.6

- 0
3,149,772.00 1.0488232 2769.9 2204840.4
- 0 0
16,098,445.00 5.36052214 3472.7 11268911.5
1,642,072.00 0.54678345 464.8 1149450.4
- 10818.5 0
108,834.00 0.03623996 1154.3 76183.8
- 1298.5 0
- 841.4 0
- 10703 0
801,140.00 0.26676668 143.5 560798
3,001,320.00 0.99939108 661.5 2100924
- 1059.1 0
- 1272.6 0
- 0 0
- 2936.5 0
- 1345.4 0
- 1625.4 0
- 2.1 0
- 7904.4 0
- 49 0
0 0 0
300,314,868
100 183735485.2531
61.18095
VUP
Sl No. Item Unit Rate Total Qty.
Earth work in excavation for foundation of structures in ordinary soil by
mechanical means as per drawing and technical specification,
including setting out, construction of shoring and bracing, removal of
stumps and other deleterious matter, dressing of sides and bottom
6.01 and backfilling with approved material all complete as per Technical
a Ordinary Soil - Depth Upto 3m cum 41 3,775.62

b Ordinary Rock - (not requiring blasting) cum 50 -
c Hard rock (blasting prohibited) cum 360 -
mechanically mixed and compacted, including centering and shuttering
6.02 all complete as per drawings and Technical specifications and 0-
a PCC Grade M15 cum 4764 239.11

b PCC Grade M20 cum 5002 16.50
mechanically mixed including centering and shuttering but excluding
6.03 cost of reinforcement, all complete as per drawing and Technical -
specifications and as directed by the Engineer-in-
charge.
a RCC Grade M30 cum 5658 -
b RCC Grade M35 cum 5754 3,271.81
6.04 and shuttering but excluding cost of reinforcement, all complete as per 0-
drawings and Technical specifications and as
b RCC Grade M35 cum 6145 1,832.51
6.05 complete as per drawing and Technical specifications and as directed 0-

b RCC Grade M30 cum 6568 -
c RCC Grade M35 cum 6577 971.52
d RCC/PSC Grade M40 cum 7273 7.35
e RCC/PSC Grade M45 cum 7842 300.77
f RCC/PSC Grade M50 cum 8626 -
Supplying, fitting and placing HYSD bar reinforcement all
6.06 complete as per drawing and Technical specifications and as directed 0-
a For Foundation tonne 82105 817.57
b For Substructure tonne 82270 178.69
c For Superstructure tonne 83400 119.54
6.07 High tensile steel wires / strands including all accessories for stressing, tonne
stressing operations and grouting complete as per drawing and
Technical Specifications and as directed by the 152376 11.65
Engineer-in-charge.
clause 2006 of MoRTH specifications complete including all accessories as
6.08 per drawing and Technical Specifications as directed by the Engineer-in- 0-
charge.
(i) 140 tonnes nr 7913 -

(ii) 85 tonnes nr 4804 -
(iii) 205 tonnes nr 11587 -
(iv) 250 tonnes nr 14130 -
(v) 400 tonnes nr 22608 -
elastomeric bearing conforming to IRC: 83 (Part-II) section IX and clause
6.09 2005 of MoRTH specifications complete including all accessories as per cucm 1 200,000.00
drawing and Technical Specifications.
6.10 Providing and laying Reinforced cement concrete of M30 grade for cum
approach slab including reinforcement and formwork all complete as
per drawings and Technical specifications and as 9746 187.69
grade, tolerance of vertical RCC post not to exceed 1 in 500, leaving
adequate space between vertical post for expansion, complete as per
6.11 drawing and Technical specifications and as directed by the Engineer-in- m 2139 -
charge.
Provision of an Reinforced cement concrete crash barrier

constructed with M-40 grade concrete with HYSD reinforcement conforming
to IRC:21 and dowel bars 25 mm dia, 450 mm long at expansion joints
filled with pre-moulded asphalt filler board, keyed to the structure on
which it is built and installed as per design given in the enclosure to
MOST circular No. RW/NH - 33022/1/94-DO III dated 24 June 1994 as per
6.12 dimensions in the approved drawing and at locations directed by the m 3957 299.35
Engineer, complete as per drawing and Technical specifications clause
2703 and as directed by the Engineer-in-charge.

6.13 additional technical specification Appendix-I 0-
(a) Providing and erecting precast concrete fascia panels of M35 grade sqm
including reinforcement, soil reinforcing element, foundation pad,
all accessories, components and draiange 4961 387.75
system including ground improvement complete.
Filling, grading and compaction with selected material meeting approved
(b) design parameters in layers in reinforced zone cum 664 326.70
complete.
Providing and laying in position RCC crash barrier with friction slab,
(c) including reinforcement and centering & shuttering, m 15455 -
complete.
Providing and fitting Drainage Spouts complete as per drawing and
6.14 Technical specifications and as directed by the Engineer-in- nr 1649 62.00
charge.
Providing and fixing filler type expansion joint in slab bridges and culverts
6.15 complete as per technical specification section 2600 m 1855 220.00
Providing and laying of Asphaltic Plug joint to provide for

horizontal movement of 25 mm and vertical movement of 2 mm, depth of
joint varying from 75 mm to 100 mm, width varying from 500 mm to 750 mm
(in traffic direction), covered with a closure plate of 200mm x 6mm of
wieldable structural steel conforming to IS: 2062, asphaltic plug to consist
6.16 of polymer modified bitumen binder, carefully selected single size m 1202 -
aggregate of 12.5 mm nominal size and a heat resistant foam
caulking/backer rod, all as per approved drawings and specifications.
Providing and laying of a strip seal expansion joint catering to

maximum horizontal movement upto 70 mm, complete as per approved
drawings and standard specifications to be installed by the
6.17 manufacturer/supplier or their authorised representative ensuring m 15290 -
compliance to the manufacturer's instructions for
installation.
PVC pipe extending through the full width of the structures with
6.18 slope of 1(V):20(H) towards drawing face complete as per drawing cum 205 1,251.00
and technical specifications Clause
2200 & 2706
6.19 Backfilling behind abutment, wing wall, retaining wall, breast wall and cum
return wall complete as per drawings & technical specifications
Clause 710.1.4.of IRC:78 & Technical specification 1562 1,680.61
clause 305.4.4.
Providing and laying filter media with granular crushed
aggregates as per specification to a thickness of not less than 600
mm with smaller size towards the soil and bigger size towards the
6.20 wall and providing over the entire surface behind abutment, wing wall, cum 1513 1,942.86
return wall to the full height, compacted to firm condition complete as
per drawing and technical
specification Clause 2504.
Providing and laying Filter material underneath pitching in slopes complete

6.21 as per drawing and Technical specification cum 1691 -
6.22 Providing and laying Pitching on slopes laid over prepared filter media cum
including boulder apron laid dry in front of toe of embankment
complete as per drawing and Technical 1818 321.03
specifications
Providing and laying flooring laid over cement concrete bedding grade M-15
6.23 complete as per drawing and technical specifications 0-
Clause 1303
Rubble stone laid in PCC Grade M-15 cum 4195 -
Flexible Apron :Construction of flexible apron 750 mm thick comprising
6.24 of loose stone boulders weighing not less than 40 kg cum 1922 -
beyond curtain wall.
4mm dia GI wire conforming to IS: 280 & IS:4826 in 100mm x 100mm mesh
6.25 (weaved diagonally) including 10% extra for laps and joints laid with stone cum 2322 -
boulders weighing not less than 40 kg
each.
Clearing grass and removal of the rubbish up to a distance of 50 m outside
6.26 the periphery of the area sqm 3-
cleared.
6.27 Bored cast-in-situ M35 grade R.C.C. pile excluding reinforcement complete metre
as per drawing and technical specifications and removal of
excavated earth with all lifts and lead upto 1000 m. 11292 4,800.00
(Pile diameter-1200 mm)
6.28 Printing of Bridge No. and span arrangement of any shade with synthetic nr
enamel paint black or any other approved colour to give an even shade as
complete as per Technical specifications and 70 -
Providing and laying 65 mm wearing course on top of deck slab consisting
of 25 mm thick mastic asphalt wearing course and 40 mm thick Bituminous
concrete laid to required level and slope after cleaning the surface,
including providing antiskid surface with bitumen precoated finegrained
hard stone chipping of 13.2 mm nominal size at the rate of 0.005cum per
10 sqm and at an approximate spacing of 10 cm center to center in both
directions, pressed into surface when the temperature of surfaces is not less
6.29 than 1000C, protruding 1 mm to 4 mm over mastic surface, all 945 1,818.14
complete as per clause 507 and 516.
Sqm
Total Amount 209,977,2
Total amount wa %ge wr wa
154,800.28 154800.42 0.07 75 283171.5

- 0.00
- 0.00
- 0.00
1,139,116.99 1139120.04 0.54 3900 932529

82,536.30 82533 0.04 4400 72600
- 0.00
- 0.00
20,027,655.91 18826000.494 8.97 5875 19221889.63
- 0.00
- 0.00
11,979,541.20 11260781.324 5.36 5875 10766003.3
- 0.00
- 0.00
- 0.00
6,797,510.11 6389675.2014 3.04 5875 5707669.425
53,456.55 53456.55 0.03 6375 46856.25
2,509,227.22 2358652.4556 1.12 6875 2067806.125
- 0.00
- 0.00
71,411,247.34 67126946.112 31.97 47,810.00 39088232.06
15,639,215.44 14701155.38 7.00 47810 8543360.14
10,606,367.93 9969619.32 4.75 47810 5715197.838
1,315,478.67 1775256.588 0.85 125000 1456312.5
- 0.00
- 0.00
- 0.00
- 0.00
- 0.00
- 0.00
272,000.00 200000 0.10 1 200000
1,829,202.38 1829226.74 0.87 6200 1163678
- 0.00
1,184,518.73 1184527.95 0.56 2769.9 829169.565
- 0.00 0
1,923,627.75 1923627.75 0.92 3472.7 1346539.425
216,928.80 216928.8 0.10 464.8 151850.16
- 0.00 10818.5
102,238.00 102238 0.05 1154.3 71566.6
408,100.00 408100 0.19 1298.5 285670
- 0.00 841.4
- 0.00 10703
256,455.00 256455 0.12 143.5 179518.5
2,625,119.55 2625112.82 1.25 1093.4 1837578.974

2,939,551.50 2939547.18 1.40 1059.1 2057683.026
- 0.00 1183.7
583,623.60 583632.54 0.28 1272.6 408542.778
- 0.00 0
- 0.00 2936.5
- 0.00 1345.4
- 0.00 1625.4
- 0.00 2.1
54,201,600.00 54201600 25.81 7904.4 37941120
- 0.00 49
1,718,143.62 1718142.3 0.82 661.5 1202699.61
Total Amount 209,977,263 141577244.4 67.42504

Sl No. Item Unit 60.150 61.000 69.315 Total Qty Rate Amount
Earth work in excavation for foundation of structures in ordinary
soil by mechanical means as per drawing and technical
specification, including setting out, construction of shoring and
bracing, removal of stumps and other deleterious matter,
7.01 dressing of sides and bottom and backfilling with approved
material all complete as per Technical specifications and as
directed by the Engineer-
in-charge.
a Ordinary Soil - Depth Upto 3m cum 12,969.64 3,122.08 7,693.18 23,784.89 43 1,022,750
b Ordinary Rock - (not requiring blasting) cum - 52 -
shuttering all complete as per drawings and Technical specifications
7.02 and as directed by the Engineer- in-charge. - - -
a PCC Grade M15 cum 561.23 147.57 342.54 1,051.34 4,963 5,217,805
a PCC Grade M20 cum - 5,540 -
7.03 Bored cast-in-situ M35 grade R.C.C. pile excluding metre 12,900.00 2,700.00 7,500.00 23,100.00 11,763 271,725,300
specifications and removal of excavated earth with all lifts
and lead upto 1000 m. (Pile diameter-1200 mm)
Foundation mechanically mixed including centering and
7.04 shuttering but excluding cost of reinforcement, all - - -
complete as per drawing and Technical specifications
a RCC Grade M30 cum - 5,894 -
b RCC Grade M35 cum 9,043.65 1,722.60 4,521.83 15,288.08 5,994 91,636,722
Substructure, mechanically mixed and compacted, including
centering and shuttering but excluding cost of reinforcement,
7.05 all complete as per drawings and Technical specifications - - -
and as directed by the Engineer-
in-charge.
b RCC Grade M35 cum 4,900.40 1,200.04 2,094.53 8,194.97 6,401 52,456,014
Providing and laying Reinforced cement concrete in super structure
including centering and shuttering but excluding cost of
7.06 reinforcement, all complete as per drawing and Technical - - -
specifications and as directed by the Engineer-
in-charge.
b RCC Grade M30 cum - 6,842 -
c RCC Grade M35 cum 5,235.59 796.40 2,915.28 8,947.26 6,967 62,335,578
d RCC/PSC Grade M40 - Solid Slab cum 55.57 8.23 30.87 94.67 7,576 717,205
e RCC/PSC Grade M45 - T Beam & Slab cum 8,428.18 1,086.01 4,635.50 14,149.69 7,824 110,707,203
f RCC/PSC Grade M45 - Box girder cum - 8,794 -
Supply and fabrication of Mild Steel as per IS 2062 including
drilling, welding, riveting, grinding supply of bolts, nuts,
washers, fixtures etc. at site. Assembling, erection of fabricated
steel structure to proper line, level and camber as per approved
drawings and technical specifications section 1900
complete including transportation and handling, painting all
exposed surfaces of steel work after erection with one coat of
7.07 red lead primer paint to IS 102 and two coats of paint including all MT - 93,992 -
labour consumable other material machinery tools and tackles
complete as per specification and directed by engineers
including furnishing of detailed erection scheme and getting the
same approved from competent authority
7.08 Supplying, fitting and placing HYSD bar reinforcement all complete - - -
as per drawing and Technical specifications and as directed by
a For Foundation MT 3,331.75 698.47 1,877.87 5,908.09 85,526 505,295,320

b For Substructure MT 697.25 134.25 116.30 947.79 85,697 81,223,157
c For Superstructure MT 1,760.83 251.19 1,032.51 3,044.54 86,875 264,494,060
High tensile steel wires / strands including all accessories for
stressing, stressing operations and grouting complete as per
7.09 drawing and Technical Specifications and as directed by the MT 438.32 56.40 241.08 735.80 158,725 116,789,359
Engineer-in-charge.

7.10 accessories as per drawing and Technical Specifications as - - -
directed by the Engineer-in-
charge.
(i) 140 tonnes Nos - 8,243 -
(ii) 400 tonnes Nos - 23,550 -
(iii) 85 tonnes Nos - 5,004 -
(iv) 205 tonnes Nos - 12,070 -
(v) 250 tonnes Nos 378 56 210 644.00 14,719 9,479,036
elastomeric bearing conforming to IRC: 83 (Part-II) section IX
7.11 and clause 2005 of MoRTH specifications complete including all cucm - 1 -
accessories as per drawing and
Technical Specifications.
Construction of Reinforced Earth structures (RES)
7.12 complete as per additional technical specification - - -
Appendix-I
Providing and erecting precast concrete fascia panels of M35
grade including reinforcement, soil reinforcing element,
(a) foundation pad, all accessories, components and draiange system sqm - 4,961 -
including ground improvement complete.
Filling, grading and compaction with selected material meeting

(b) approved design parameters in layers in cum - 664 -
reinforced zone complete.
Providing and laying in position RCC crash barrier with friction
(c) slab, including reinforcement and centering & m - 15,455 -
shuttering, complete.
Providing and laying Reinforced cement concrete of M30 grade for
approach slab including reinforcement and formwork all
7.13 complete as per drawings and Technical specifications and as cum 57.75 57.75 57.75 173.25 10,152 1,758,834

grade, tolerance of vertical RCC post not to exceed 1 in 500,
leaving adequate space between vertical post for expansion,
7.14 complete as per drawing and Technical specifications and as m - 2,179 -
directed by the Engineer-
in-charge.
constructed with M-40 grade concrete with HYSD
reinforcement conforming to IRC:21 and dowel bars 25 mm dia,
450 mm long at expansion joints filled with pre- moulded
asphalt filler board, keyed to the structure on which it is built
and installed as per design given in the enclosure to MOST
7.15 circular No. RW/NH - 33022/1/94-DO III dated 24 June 1994 as per m 3,080.00 500.00 1,730.00 5,310.00 4,122 21,887,820
dimensions in the approved drawing and at locations directed
by the Engineer, complete as per drawing and Technical
specifications clause 2703 and as directed by the Engineer-in-
charge.
Providing and fitting Drainage Spouts complete as per drawing

7.16 and Technical specifications and as directed by Each 604.00 88.00 336.00 1,028.00 1,717 1,765,076
Providing and fixing filler type expansion joint in slab bridges
7.17 and culverts complete as per technical m 577.50 110.00 330.00 1,017.50 1,932 1,965,810
specification section 2600
movement of 25 mm and vertical movement of 2 mm, depth of joint
varying from 75 mm to 100 mm, width varying from 500 mm to
750 mm (in traffic direction), covered with a closure plate of
200mm x 6mm of wieldable structural steel conforming to IS: 2062,
7.18 asphaltic plug to consist of polymer modified bitumen binder, m - 1,253 -
carefully selected single size aggregate of 12.5 mm nominal
size and a heat resistant foam caulking/backer rod, all as per
approved drawings and specifications.
Providing and laying of a strip seal expansion joint

catering to maximum horizontal movement upto 70 mm,
complete as per approved drawings and standard
7.19 specifications to be installed by the manufacturer/supplier or their m - 15,927 -
authorised representative ensuring compliance to the manufacturer's
instructions for installation.

plain/reinforced concrete abutment, wing wall, return wall with 100
mm dia PVC pipe extending through the full width of the structures
7.20 with slope of 1(V):20(H) towards drawing face complete as per cum - 205 -
drawing and technical specifications
Clause 2200 & 2706
7.21 Backfilling behind abutment, wing wall, retaining wall, breast cum - 1,627 -
wall and return wall complete as per drawings & technical
specifications Clause 710.1.4.of IRC:78 &
Technical specification clause 305.4.4.
aggregates as per specification to a thickness of not less than 600
mm with smaller size towards the soil and bigger size towards the
wall and providing over the entire surface behind abutment, wing
7.22 wall, return wall to the full height, compacted to firm condition cum 311.43 166.06 190.42 667.91 1,576 1,052,627
complete as per drawing and technical specification Clause 2504.

7.23 complete as per drawing and Technical cum - 1,691 -
specification
7.24 Providing and laying Pitching on slopes laid over prepared filter cum 622.86 332.12 380.84 1,335.82 1,818 2,428,522
media including boulder apron laid dry in front of toe of
embankment complete as per drawing and Technical
specifications
Flexible Apron :Construction of flexible apron 750 mm thick
7.25 comprising of loose stone boulders weighing not less cum - 1,922 -
than 40 kg beyond curtain wall.
Providing and fixing to the required profile and slope 1 layer of
Fibre Glass Reinforced Plastic sheet 2mm thick supported by
MS angles of size 25x25x3mm at bottom and MS flats of size
25x3mm at top,fixed on MS angle posts of size 50x50x3mm, 1.5m
7.26 long placed at regular interval of 2m centre to centre m - 52,841 -
throughout the length, complete as per drawings and as directed
by the Engineer.
Printing of Bridge No. and span arrangement of any shade with

synthetic enamel paint black or any other approved colour to
7.27 give an even shade as complete as per Technical Nos - 73 -
specifications and as directed by the Engineer-
in-charge.
Providing and laying 65 mm wearing course on top of deck
slab consisting of 25 mm thick mastic asphalt wearing
course and 40 mm thick Bituminous concrete laid to required level
and slope after cleaning the surface, including providing
antiskid surface with bitumen precoated finegrained hard
stone chipping of 13.2 mm nominal size at the rate of 0.005cum
7.28 per 10 sqm and at an approximate spacing of 10 cm center to Sqm 20,625.00 2,887.50 11,343.75 34,856.25 945 32,939,156
center in both directions, pressed into surface when the
temperature of surfaces is not less than 1000C, protruding 1 mm to
4 mm over mastic surface, all complete as per clause 507 and
516.
1,636,897,353
amt %ge wr wa
1022750.27 0.06 75 1783866.75

0.00
0.00
5217800.42 0.32 3,765.00 3958295.1

0.00
271725300 16.60 6,070.23 140222321.98
0.00
0.00
91636751.52 5.60 6070.23039 92802167.801
0.00
0.00
52456002.97 3.20 6070.23039 49745355.928
0.00
0.00
0.00
62335560.42 3.81 6070.23039 54311929.548
717219.92 0.04 6570.23039 622003.7109
110707174.56 6.76 7070.23039 100041568.23
0.00
0.00
0.00
505295305.34 30.87 47,810.00 282465782.9
81222759.63 4.96 47810 45313839.9
264494412.5 16.16 47810 145559457.4
116789855 7.13 125000 91975000
0.00
0.00 5770.1
0.00 16485
0.00 3502.8
0.00 8449
9479036 0.58 10303.3 6635325.2
0.00 0.7
0.00
0.00 3472.7
0.00 464.8
0.00 10818.5
1758834 0.11 7106.4 1231183.8
0.00 1525.3
21887820 1.34 2885.4 15321474
1765076 0.11 1201.9 1235553.2
1965810 0.12 1352.4 1376067
0.00 877.1
0.00 11148.9
0.00 143.5
0.00 1138.9
1052626.16 0.06 1103.2 736838.312
0.00 1183.7
2428520.76 0.15 1272.6 1699964.532

0.00 1345.4
0.00 36988.7
0.00 51.1
32939156.25 2.01 661.5 23057409.375
1636897772 100.00 1060095404.7 64.76247

MNBR
Si No. Item Unit Rate 49.519 64.465, 64.525 63.582 63.982 Total Qty. Total amount
Earth work in excavation for foundation of structures in ordinary soil
by mechanical means as per drawing and technical specification,
including setting out, construction of shoring and bracing,
removal of stumps and other deleterious matter, dressing of
sides and bottom and backfilling with approved material all
6.01
complete as per Technical specifications and as directed by
a Ordinary Soil - Depth Upto 3m cum 41 1,191.90 2,232.74 1,431.51 1,431.51 6,287.66 257,794.05
b Ordinary Rock - (not requiring blasting) cum 50 0 - -
c Hard rock (blasting prohibited) cum 360 0 - -
shuttering all complete as per drawings and Technical
6.02 specifications and as directed by the Engineer-in-charge. 0 0 - -
a PCC Grade M15 cum 4764 59.25 112.20 256.89 256.89 685.22 3,264,387.98
b PCC Grade M20 cum 5002 - 172.29 172.29 344.58 1,723,638.07
mechanically mixed including centering and shuttering but
excluding cost of reinforcement, all complete as per drawing
6.03 and Technical specifications and as directed by the Engineer-in- 0 0 - -
charge.
a RCC Grade M30 cum 5658 0 - -

b RCC Grade M35 cum 5754 829.98 1,291.95 474.71 474.71 2,457.09 17,672,577.82
Substructure, mechanically mixed and compacted, including
centering and shuttering but excluding cost of reinforcement, all
6.04 complete as per drawings and Technical specifications and as 0 0 - -
directed by the Engineer in-charge.

b RCC Grade M35 cum 6145 483.36 1,013.97 308.50 308.50 1,691.46 12,992,491.12
Providing and laying Reinforced cement concrete in super-
structure including centering and shuttering but excluding cost
of reinforcement, all complete as per drawing and Technical
6.05 specifications and as directed by the Engineer-in-charge. 0 0 - -

b RCC Grade M30 cum 6568 0 - -
c RCC Grade M35 cum 6577 224.39 397.38 467.50 467.50 1,245.41 10,238,810.52
d RCC/PSC Grade M40 cum 7273 1.47 5.00 6.47 47,041.76
e RCC/PSC Grade M45 cum 7842 83.62 603.50 549.70 5,388,421.31
f RCC/PSC Grade M50 cum 8626 0 - -
6.06 Supplying, fitting and placing HYSD bar reinforcement all 0 0 - -
complete as per drawing and Technical specifications
and as directed by the Engineer-in-
charge.
a For Foundation tonne 82105 183.31 458.44 47.47 47.47 589.35 60,485,965.26
b For Substructure tonne 82270 75.03 155.22 30.85 30.85 233.56 24,018,846.20
c For Superstructure tonne 83400 44.90 135.92 46.75 46.75 219.46 22,878,561.47
High tensile steel wires / strands including all
accessories for stressing, stressing operations and grouting
complete as per drawing and Technical Specifications and
6.07 as directed by the Engineer-in- tonne 152376 32.74 45.65 5,565,333.03
charge.
3.79
POT/PTFEE bearing conforming to IRC: 83 (Part-
III) section IX and clause 2006 of MoRTH specifications complete
6.08 including all accessories as per drawing and Technical 0 0 - -
Specifications as directed by the Engineer-in-
charge.
(i) 140 tonnes nr 7913 0 - -

(ii) 85 tonnes nr 4804 10.00 34.00 44.00 211,376.00
(iii) 205 tonnes nr 11587 0 - -
(iv) 250 tonnes nr 14130 0 - -
(v) 400 tonnes nr 22608 0 - -
elastomeric bearing conforming to IRC: 83 (Part-II) section IX and
6.09 accessories as per drawing and cucm 1 - -
-
Providing and laying Reinforced cement concrete of M30 grade
for approach slab including reinforcement and formwork all
complete as per drawings and Technical specifications and as
6.10 directed by the Engineer cum 9746 57.75 67.38 67.38 219.28 2,137,054.15
in-charge.
26.78
grade, tolerance of vertical RCC post not to exceed 1 in 500,
leaving adequate space between vertical post for expansion,
6.11 complete as per drawing and Technical specifications and as m 2139 0 - -

constructed with M-40 grade concrete with HYSD reinforcement
conforming to IRC:21 and dowel bars 25 mm dia, 450 mm long at
expansion joints filled with pre- moulded asphalt filler board, keyed
to the structure on which it is built and installed as per design
given in the enclosure to MOST circular No. RW/NH -
33022/1/94- DO III dated 24 June 1994 as per dimensions in
the approved drawing and at locations directed by the
6.12 Engineer, complete as per drawing and Technical m 3957 260.00 164.00 164.00 710.40 2,811,052.80
specifications clause 2703 and as directed by the Engineer-
in-charge.
122.40
Construction of Reinforced Earth structures (RES) complete
6.13 as per additional technical specification 0 0 - -
Appendix-I
Providing and erecting precast concrete fascia panels of M35
grade including reinforcement, soil reinforcing element,
(a) foundation pad, all accessories, components and draiange sqm 4961 0 - -
system including ground improvement
complete.
Filling, grading and compaction with selected material
(b) meeting approved design parameters in layers in reinforced cum 664 0 - -
zone complete.
Providing and laying in position RCC crash barrier with friction slab,
(c) including reinforcement and centering & m 15455 0 - -
shuttering, complete.
Providing and fitting Drainage Spouts complete as per drawing 64.00
6.14 and Technical specifications and as directed nr 1649 40.00 105,536.00
24.00
Providing and fixing filler type expansion joint in slab bridges 133.50
6.15 and culverts complete as per technical m 1855 82.50 247,642.50
specification section 2600
51.00
movement of 25 mm and vertical movement of 2 mm, depth of
joint varying from 75 mm to 100 mm, width varying from 500
mm to 750 mm (in traffic direction), covered with a closure
plate of 200mm x 6mm of wieldable structural steel conforming
to IS: 2062, asphaltic plug to consist of polymer modified
6.16 bitumen binder, carefully selected single size aggregate of 12.5 m 1202 0 - -
mm nominal size and a heat resistant foam caulking/backer rod,
all as per approved drawings and specifications.
Providing and laying of a strip seal expansion joint catering to

maximum horizontal movement upto 70 mm, complete as per
approved drawings and standard specifications to be
6.17 installed by the manufacturer/supplier or their authorised m 15290 0 - -
representative ensuring compliance to the manufacturer's
instructions for installation.

plain/reinforced concrete abutment, wing wall, return wall with
100 mm dia PVC pipe extending through the full width of the
structures with slope of 1(V):20(H) towards drawing face
6.18 complete as per drawing and technical specifications Clause cum 205 680.00 295.00 295.00 1,536.00 314,880.00
2200 & 2706
266.00
Backfilling behind abutment, wing wall, retaining wall, breast wall
and return wall complete as per drawings & technical specifications
6.19 Clause 710.1.4.of IRC:78 & Technical specification clause cum 1562 0 440.00 440.00 880.00 1,374,560.00
305.4.4.

aggregates as per specification to a thickness of not less than
600 mm with smaller size towards the soil and bigger size towards
the wall and providing over the entire surface behind abutment,
wing wall, return wall to the full height, compacted to firm condition
6.20 complete as per drawing and technical specification Clause 2504. cum 1513 538.22 223.99 223.99 986.20 1,492,126.08
-
6.21 complete as per drawing and Technical cum 1691 561.259344 561.26 949,089.55
specification
6.22 Providing and laying Pitching on slopes laid over prepared cum 1818 585.16 680.09 1,236,408.73
filter media including boulder apron laid dry in front of toe of
embankment complete as per drawing
and Technical specifications
94.93
Providing and laying flooring laid over cement concrete bedding
6.23 grade M-15 complete as per drawing and 0 0 - -
technical specifications Clause 1303
Rubble stone laid in PCC Grade M-15 cum 4195 0 - -
Flexible Apron :Construction of flexible apron 750 mm thick
6.24 comprising of loose stone boulders weighing not cum 1922 0 909.37 909.37 1,818.74 3,495,610.39
less than 40 kg beyond curtain wall.
4mm dia GI wire conforming to IS: 280 & IS:4826 in 100mm x
100mm mesh (weaved diagonally) including 10% extra for laps
6.25 and joints laid with stone boulders weighing not less than 40 kg cum 2322 0 - -
each.
Clearing grass and removal of the rubbish up to a distance of

6.26 50 m outside the periphery of the area sqm 3 0 - -
cleared.
Bored cast-in-situ M35 grade R.C.C. pile excluding
specifications and removal of excavated earth with all lifts and
6.27 lead upto 1000 m. (Pile diameter-1200 mm) metre 11292 1,800.00 2,200.00 24,842,400.00
400.00
Printing of Bridge No. and span arrangement of any shade
with synthetic enamel paint black or any other approved colour
6.28 to give an even shade as complete as per Technical specifications nr 70 0 - -
and as directed by the
Engineer-in-charge.
Providing and laying 65 mm wearing course on top of deck slab
consisting of 25 mm thick mastic asphalt wearing course and
40 mm thick Bituminous concrete laid to required level and
slope after cleaning the surface, including providing
antiskid surface with bitumen precoated finegrained hard
stone chipping of
13.2 mm nominal size at the rate of 0.005cum per 10 sqm and
at an approximate spacing of 10 cm center to center in both
6.29 directions, pressed into surface when the temperature of surfaces 945 780.30 1,237.50 935.00 935.00 3,887.80 3,673,971.00
is not less than 1000C, protruding 1 mm to 4 mm over
mastic surface, all complete as per clause 507 and 516.
Sqm
Total Amount 207,425,576
amt %ge wr wa
257794.06 0.124282017379 75 471574.5

0
0
0
3264388.08 1.573755175311 3,765.00 2579853.3

1723589.16 0.830938998117 4001.25 1378750.725
0
0
14138084.352 6.815943102555 6,070.23 14915090.2452919
0
0
10393997.12 5.010925894498 6070.2303887 10267527.6123364
0
0
0 6070.2303887
8191048.416 3.948888587995 6070.2303887 7559913.48792085
47056.31 0.022685755976 6070.2303887 39274.390614841
4310716.032 2.078187855855 6570.2303887 3611629.36374276
0
0
48388745.96 23.32812077336 47,810.00 28176919.12

19214981.2 9.2635052469 47,810.00 11166503.6
18302630.4 8.823662692028 47,810.00 10492191.36
6955964.4 3.353456974324 125000 5706250
0
211376 0.101903960492 3362.8 147963.2
0
0
0
0
2137102.88 1.030293162194 6200 1359536

0
2811052.8 1.35520311423 2769.9 1967736.96
0 0
0 3472.7
0 464.8
0 10818.5
105536 0.05087870134 1154.3 73875.2
247642.5 0.119387969951 1298.5 173349.75
0 841.4
0 10703
314880 0.151803038566 143.5 220416
1374560 0.662672715609 1093.4 962192
1492120.6 0.719348453336 1059.1 1044484.42
949090.66 0.457554770269 1183.7 664363.462
1236403.62 0.596067792206 1272.6 865482.534

0 0
0 2936.5
3495618.28 1.685230807196 1345.4 2446932.796
0 1625.4
0 2.1
24842400 11.9764729588 7904.4 17389680
0 49
3673971 1.771214308316 661.5 2571779.7
178080749.83 85.8523848268 126253269.726907

60.86678
Flyover @ 57+917
Si No. Item Unit Rate 57+917 Total Qty.
Earth work in excavation for foundation of structures in ordinary soil by
mechanical means as per drawing and technical specification, including
setting out, construction of shoring and bracing, removal of stumps and other
deleterious matter, dressing of sides and bottom and backfilling with
7.01 approved material all complete as per Technical specifications and as
a Ordinary Soil - Depth Upto 3m cum 43 2,805 2,805

b Ordinary Rock - (not requiring blasting) cum 52 - -
Providing and laying Plain cement concrete in Levelling Course, mechanically
mixed and compacted, including centering and shuttering all complete
7.02 as per drawings and Technical specifications and as directed by the - - -
Engineer-in-charge.
a PCC Grade M15 cum 4,963 137 137

a PCC Grade M20 cum 5,540 - -
7.03 Bored cast-in-situ M35 grade R.C.C. pile excluding reinforcement complete as metre 11,763 1,800 1,800
per drawing and technical specifications and removal of excavated earth
with all lifts and lead upto 1000 m.
(Pile diameter-1200 mm)
Providing and laying Reinforced Cement Concrete in Foundation mechanically
mixed including centering and shuttering but excluding cost of
7.04 reinforcement, all complete as per drawing and Technical specifications and - - -
as directed by the Engineer-in-
charge.
a RCC Grade M30 cum 5,894 - -

b RCC Grade M35 cum 5,994 1,375 1,485
7.05 and shuttering but excluding cost of reinforcement, all complete as per - - -

b RCC Grade M35 cum 6,401 1,867 2,016
7.06 complete as per drawing and Technical specifications and as directed by - - -

b RCC Grade M30 cum 6,842 - -
c RCC Grade M35 cum 6,967 904 976
d RCC/PSC Grade M40 cum 7,576 10 11
e RCC/PSC Grade M45 - cum 7,824 1,352 1,460
f RCC/PSC Grade M45 - Box girder cum 8,794 - -
Supply and fabrication of Mild Steel as per IS 2062 including drilling,
welding, riveting, grinding supply of bolts, nuts, washers, fixtures etc. at site.
Assembling, erection of fabricated steel structure to proper line, level and
camber as per approved drawings and technical specifications section
1900 complete including transportation and handling, painting all
exposed surfaces of steel work after erection with one coat of red lead
primer paint to IS 102 and two coats of paint including all labour consumable
7.07 other material machinery tools and tackles complete as per specification MT 93,992 - -
and directed by engineers including furnishing of detailed erection
scheme and getting the same approved from competent authority
Supplying, fitting and placing HYSD bar reinforcement all complete as

7.08 per drawing and Technical specifications and as - - -
a For Foundation MT 85,526 471 490
b For Substructure MT 85,697 211 219
c For Superstructure MT 86,875 299 311
7.08 a Providing structural steel for plate girders as per drawings and MT 125,000 396 396
Technical specifications
7.09 High tensile steel wires / strands including all accessories for stressing, MT 158,725 71 71
stressing operations and grouting complete as per drawing and Technical
Specifications and as directed by the
Engineer-in-charge.
Supplying, fitting and fixing in position true to line and level POT/PTFEE
bearing conforming to IRC: 83 (Part-III) section IX and clause 2006 of
MoRTH specifications complete including all accessories as per drawing
7.10 and Technical Specifications as directed by the Engineer-in-charge. - - -
(i) 140 tonnes Nos 8,243 - -

(ii) 400 tonnes Nos 23,550 35 35
(iii) 85 tonnes Nos 5,004 - -
(iv) 205 tonnes Nos 12,070 - -
(v) 250 tonnes Nos 14,719 35 35
Supplying, fitting and fixing in position true to line and level elastomeric
bearing conforming to IRC: 83 (Part-II) section IX and clause 2005 of MoRTH
7.11 specifications complete including all accessories as per drawing and cucm 1 - -

7.12 additional technical specification Appendix-I - - -
(a) Providing and erecting precast concrete fascia panels of M35 grade sqm 4,961 - -
including reinforcement, soil reinforcing element, foundation pad, all
accessories, components and draiange
system including ground improvement complete.
Filling, grading and compaction with selected material meeting approved
(b) design parameters in layers in reinforced zone cum 664 - -
complete.
Providing and laying in position RCC crash barrier with friction
(c) slab, including reinforcement and centering & shuttering, complete. m 15,455 - -
7.13 Providing and laying Reinforced cement concrete of M30 grade for cum 10,152 58 58
approach slab including reinforcement and formwork all complete as per
Construction of precast RCC railing of M35 Grade, true to line and grade,
tolerance of vertical RCC post not to exceed 1 in 500, leaving adequate space
between vertical post for expansion, complete as per drawing and
7.14 Technical specifications and as directed by the Engineer-in-charge. m 2,179 - -
Provision of an Reinforced cement concrete crash barrier constructed

with M-40 grade concrete with HYSD reinforcement conforming to IRC:21
and dowel bars 25 mm dia, 450 mm long at expansion joints filled with pre-
moulded asphalt filler board, keyed to the structure on which it is built and
installed as per design given in the enclosure to MOST circular No. RW/NH -
33022/1/94 DO III dated 24 June 1994 as per dimensions in the approved
7.15 drawing and at locations directed by the Engineer, complete as per m 4,122 560 560
drawing and Technical specifications clause 2703 and as directed by the
Engineer-in-charge.
Providing and fitting Drainage Spouts complete as per drawing and

7.16 Technical specifications and as directed by the Engineer-in- Each 1,717 100 100
charge.
Providing and fixing filler type expansion joint in slab bridges and culverts
7.17 complete as per technical specification section 2600 m 1,932 - -

movement of 25 mm and vertical movement of 2 mm, depth of joint varying from
75 mm to 100 mm, width varying from 500 mm to 750 mm (in traffic direction),
covered with a closure plate of 200mm x 6mm of wieldable structural steel
conforming to IS: 2062, asphaltic plug to consist of polymer modified
7.18 bitumen binder, carefully selected single size aggregate of 12.5 mm m 1,253 - -
nominal size and a heat resistant foam caulking/backer rod, all as per
approved drawings and specifications.
Providing and laying of a strip seal expansion joint catering to maximum

horizontal movement upto 70 mm, complete as per approved drawings and
standard specifications to be installed by the manufacturer/supplier or their
7.19 authorised representative ensuring compliance to the manufacturer's m 15,927 110 110
instructions for
installation.

PVC pipe extending through the full width of the structures with
7.20 slope of 1(V):20(H) towards drawing face complete as per drawing and cum 205 745 745
technical specifications Clause
2200 & 2706
7.21 Backfilling behind abutment, wing wall, retaining wall, breast wall and return cum 1,627 - -
wall complete as per drawings & technical specifications Clause
710.1.4.of IRC:78 & Technical specification
clause 305.4.4.
Providing and laying filter media with granular crushed aggregates
as per specification to a thickness of not less than 600 mm with smaller
size towards the soil and bigger size towards the wall and providing over
the entire surface behind abutment, wing wall, return wall to the full 569 569
7.22 cum 1,576
height, compacted to firm condition complete as per drawing and technical
specification
Clause 2504.
Providing and laying Filter material underneath pitching in slopes complete as

7.23 per drawing and Technical specification cum 1,691 - -
7.24 Providing and laying Pitching on slopes laid over prepared filter media cum 1,818 609 609
including boulder apron laid dry in front of toe of embankment
complete as per drawing and Technical
specifications
Flexible Apron :Construction of flexible apron 750 mm thick comprising of
7.25 loose stone boulders weighing not less than 40 kg cum 1,922 - -
beyond curtain wall.
Providing and fixing to the required profile and slope 1 layer of Fibre
Glass Reinforced Plastic sheet 2mm thick supported by MS angles of size
25x25x3mm at bottom and MS flats of size 25x3mm at top,fixed on MS
angle posts of size 50x50x3mm, 1.5m long placed at regular interval of
7.26 m 52,841 - -
2m centre to centre throughout the length, complete as per drawings and as
directed
by the Engineer.
7.27 Printing of Bridge No. and span arrangement of any shade with synthetic Nos 73 - -
enamel paint black or any other approved colour to give an even shade as
complete as per Technical specifications and
Providing and laying 65 mm wearing course on top of deck slab consisting
of 25 mm thick mastic asphalt wearing course and 40 mm thick Bituminous
concrete laid to required level and slope after cleaning the surface, including
providing antiskid surface with bitumen precoated finegrained hard stone
chipping of 13.2 mm nominal size at the rate of 0.005cum per 10 sqm and at an
approximate spacing of 10 cm center to center in both directions, pressed into
surface when the temperature of surfaces is not less than 1000C, protruding 1
7.28 mm to 4 mm over mastic surface, all complete as per clause 507 and 516. Sqm 945 3,300 3,300
abstract fig
table 10
Amount
amt %ge wr wa
120,625 120615 0.06 75 210375

- 0.00
- 0.00
680,060 679931 0.32 3,765.00 515805

- 0.00 4265
21,173,400
10500 18900000
21173400 9.82
- 0.00
- 0.00
8,241,438 8901090 4.13 6,070.23 9014292.1272
- 0.00
- 0.00
11,948,719 12906720.36 5.99 6070.23039 12239769.747
- 0.00
- 0.00
- 0.00
6,300,519 6802021.44 3.16 6070.23039 5926487.3331
77,957 81820.8 0.04 6070.23039 65558.488198
10,581,797 11424291.84 5.30 6570.23039 9593587.6044
- 0.00
- 0.00
- 0.00
40,273,335 41894055.84 19.44 47,810.00 23419250.4
18,053,999 18805349.68 8.73 47810 10491426.4
25,942,783 27014650 12.53 47810 14866997.6
49,500,000
49500000 22.97 93750 37125000
11,197,374
125000 8875000
11269475 5.23
- 0.00
- 0.00
824,250 824250 0.38 16485 576975
- 0.00
- 0.00
515,165 515165 0.24 10303.3 360615.5
- 0.00
- 0.00
-
0.00
- 0.00
- 0.00
586,278
6200 359600
588816 0.27
- 0.00
2885.4 1615824
2,308,320 2308320 1.07
1201.9 120190
171,700 171700 0.08
1352.4
- 0.00
877.1
- 0.00
11148.9 1226379
1,751,970 1751970 0.81
143.5 106907.5
152,725 152725 0.07
-
1138.9
0.00
1103.2 627720.8
897,170 896744 0.42
1183.7
- 0.00
1,106,850
1272.6 775013.4
1107162 0.51
1345.4
- 0.00
36988.7
- 0.00
-
51.1
0.00
661.5 2182950
3,118,500 3118500 1.45
215,524,935 222008773 103.01 159195724.9 73.86418
253,562,870 187292133.49
MATERIALS
ITEM UNIT QTY CEMENT METAL 40 METAL 20 METAL 12
CONST QTY C QTY C QTY C
METAL 12
QTY
RATE ANALYSIS OF GOVERNING ITEMS
pac1
S NO ITEM UNIT PACKG 1.00
QTY RATE
1 EARTH WORK CUM
MURUM
ROYALTY 1 75.00
land cost
CUTTING/LOADING
TRANSPORTATION 5 KM LEAD
SPREADING/LEVELLING
WATERING /COMPACTION
TOTAL
2 GSB CUM 1
rate of GSB at site from plant cum 1 880.00
trp to site 11 km
MIXING GSB/ROTAVATOR 1.21 10.00
GRADER 1.21 10.00
WATERNG/COMPACTION 1.21 10.00
CRUSHER CAPEX/OPERATIONS 1 -
TOTAL
3 WMM CUM
COST OF WMM AT SITE 1 900.00
trp to site 13 km
SPREADING 1.21 30.00
GRADER 1.21 20.00
COMPACTION 1.21 8.00
others 1 -
TOTAL/ CUM
4 DLC CUM
CEMENT BAGS 2.55 250.00
CEMENTANIOUS MATERIAL BAGS 0.45 100.00
AGGREGATES
METAL CUM 0.7 912.00
NATURAL SAND 50% 0 -
CRUSHED SAND 50% 0.5 912.00
royalty 1 140.00
ADMIXURES 1 25.00
WATER 1 20.00
PLANT COST( CAPEX AND OPERATION) 1 125.00
TRANSPORTATION 1.21 230.00
CURING 1 15.00
SPREADING/PAVOUR 1 110.00
COST/CUM
5 PQC/ M40 DESIGN MIX BAGS 6.12 250.00
CEMENTANIOUS MATERIAL
royalty CUM 1 140.00
METAL 0.9 912.00
NATURAL SAND 50% 0.25 1,519.43
CRUSHED SAND 50% 0.25 912.00
ADMIXURES 1 30.00
WATER 1 20.00
PLANT COST 1 -
TRANSPORTATION/LOADING 1.21 240.00
SPREADING/ SLIP FORM PAVOUR/COMPACTION 1 400.00
DOWELS KG 8 40.00
TOTAL PER CUM
6 M10 FOUNDATIONS CUM

CEMENTAOUS MATERIAL 0.6 50.00
METAL 20 MM 0.9 912.00
CRUSHED SAND 100% 0.6 912.00
WATER 1 10.00
PLANT 1 290.00
TRP / POURING 1 255.00
LABOUR COST 1 200.00
PLASTISIZER 1 25.00
extra carting upb to plant
TOTAL/CUM
7 M15 FOUNDATIONS CUM

CEMENTAOUS MATERIAL 0.6 50.00
METAL 20 MM 0.9 912.00
CRUSHED SAND 100% 0.6 912.00
WATER 1 10.00
PLANT 1 290.00
TRP / POURING 1 290.00
LABOUR COST 1 200.00
PLASTISIZER 1 25.00
TOTAL/CUM
8 RCC M25/ super str/items involving sht CUM
CEMENTIOUS MATERIAL 0.6 50.00
METAL 20 MM CUM 0.9 912.00
SAND NATURAL 0.3 1,519.43
SAND CRUSHED 0.3 912.00
SHUTTERING LABOR ONLY SQM 3 180.00
RMC COST CUM 1 250.00
TRANSPORTATION 1 290.00
POURING LABOUR 1 250.00
PLASTISIZER 1 25.00
TOTAL PER CUM
9 RCC M30 S.S. WALLS/TOP SLAB CUM
CEMENTIOUS MATERIAL 1.5 50.00
METAL 20 MM 0.9 912.00
SHUTTERING LABOR ONLY+ m,aterial SQM 4 360.00
RMC COST CUM 1 250.00
PLASTISIZER 1 25.00
staging matetrials 1 750.00
TOTAL/ CUM
10 RCC M40 PIERS/CAPS CUM
CEMENTIOUS MATERIAL BAGS 1.6 50.00
METAL 20 MM 0.9 912.00
SHUTTERING LABOR ONLY+ material 4 500.00
RMC COST 1 250.00
PLASTISIZER 1 25.00
TOTAL/CUM
11 TMT STEEL mt
RATE 1.03 42,000.00
BINDING WIRE 10 56.00
LABOUR COST 1 5,000.00
RATE PER mt
12 EXCAVATION FOR FDN
SOIL CUM
SR CUM
HR CUM
13 CRANE - ALFA NOS 2 1,700,000.00

PLY SHUTTERING NOS 500 2,000.00
FIXTURES FASTERNERS & WOODEN FIXT LS
MS PLATE MT 100 72,000.00
CHANNEL / GIRDER MT 36 50,000.00
TRUSSELS MT 40 62,000.00
MS PIPES MT 13 52,000.00
CLAMP & JACKS 1000 400.00
CONSIDERING Rates and repeatations OF MATERIAL 60%

ONLY EXECUTION COST WITH M+L+ROYALTY PACKAGE 3 LEADS
EXCL GST
Finalized by RD Sir TOWNS
AMT VEJALKA
SARANGVALA
BHOLAND
75.00 BHADIYAD
ANANDPUR
PIPLI
VALINDA
VEJALKA DHANDUKA
225.00
300.00 200.00
880.00
200.00
6.00
7.00
8.00
-
1,101.00 1,130.00
900.00
200.00
10.00
10.00
10.00
70.00
1,200.00 RATES
1,200.00 1,230.00 murum
metal
4.4 crs sand
637.50 ns
45.00
638.40
- rubble
456.00 cement
140.00 steel
25.00
20.00 gsb
125.00 wmm
278.30
15.00
110.00
2,490.20 2,490.20 7.2
1,530.00
108.00
140.00
820.80
379.86
228.00 5
30.00
20.00
-
290.40
400.00
360.00
4,307.06 4,307.06
600.00
30.00
820.80
547.20
10.00
290.00
255.00
200.00
25.00
2,778.00 2,778.00
metal
900.00 rmc
30.00 Trp
820.80 pouring lab
547.20 loader
10.00 admix
250.00 cement
290.00 fly ash
200.00
25.00 m20 pouring mac
3,048.00 3,765.00 4001.25 shuttering/stg lab
shuttering/stg mat
1,400.00
30.00
820.80
455.83
273.60 tmt
540.00 steel
250.00 bwire
290.00 lab
250.00
25.00
4,310.23 4,310.23
1,375.00
75.00
820.80
455.83
273.60
1,440.00
250.00
290.00
300.00
25.00
750.00
6,055.23 6,055.23
1,600.00
80.00
820.80
455.83
273.60
2,000.00
250.00
290.00
300.00
25.00
6,070.23 6,070.23
43,260.00
560.00
5,000.00
48,820.00 47,810.00
50.00 50
125.00 125
450.00 450
3,400,000.00
1,000,000.00
1,000,000.00
7,200,000.00
1,800,000.00
2,480,000.00
676,000.00
400,000.00
17,956,000.00
10,773,600.00 load in structures if any
KAGE 3 LEADS
CH 48.52 TO 71.06 22.54
LEADS AVAILABLE AT LEAD TRP COST
MURUM 50 (3+5)/2 4 25 35 25
55
METAL 23
AT DHANDHUKA 58 (23+58)/2 40.5
LIMBDI 45 815.04 1200
NATURAL SAND 25 KM
CRUSH SAND
172
912 80
912
1519
570
250
47810
912
1012
125000
100000
125000
45000
30000 2.47 0
425000 8.33333333
22.7272727272727
170000 cum
pcc pcc as abt/p/ pc girder

m15 m20 m30 m35 m40 m45
760
150
300
50
40
120 1420 1420 1420 1420 1420 1420
250 900 1125 1750 2000 2250 2375
55 45 56.25 87.5 100 112.5 118.75
2365 2601.25 3257.5 3520 3782.5 3913.75
100 100 100 100 100 100 100
400 400 400 400 400 400 400
900 900 900 900 900 900 900
3765 4001.25 4657.5 4920 5182.5 5313.75
1470.58823529412
882.352941176471 shuttering
staging
shuttering lab 170000000
1.02 40500 41310
10 50 500
1 6000 6000
47810
ZERO RATE
85
100
2015.04
2200
777.39
2120.14
883.39

Dpet BOQ - Afrer Visit p3

Uploaded by

Copyright:

Available Formats

Dpet BOQ - Afrer Visit p3

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Dpet BOQ - Afrer Visit p3

Uploaded by

Copyright:

Available Formats

PROJECT : From Km 48+520 to Km 71+060

ROAD DESCRIPTION : Ahmedabad Dholera Expressway Length of Road : 22.540 Kms

12 TOLLPLAZA & RAMP PLAZA 1

iii) Total Civil Cost as on Bid due date

TOTAL EPC Cost 7,319,184,770

Civil Cost per km

1381889660 -28.701008 1598772165 CD 34840.08

522,257,280 -14.634663 0 DP 11216

334914430 32.4341297 334914430 INT CHNG 644.11

603398003.65 37.3322259 603398003.65 LVUP/UTL 3665 12874

187292133.493604 26.1358205 168956688 MNB 6,287.66

141577244.405 32.5749644 67986700 FO 2,805

183735485.253145 38.8190513 133300100 TOTAL CUM 106520 4943404 128816

26211133.5982633 10.189096 42733738

209975271.6 18.8019016 CD 1681 274

239062579.0053 23.8935437 DP 182 960

44686760 20 INT CHNG 36.42

4422320 20 LVUP/UTL 612 130.00

753,083,854 19.3721489 MNB 685.22 344.58

5,805,723,522 20.678003 TOTAL CUM 4624 765 960

5,805,723,522 20.678003 20.6780030257903

7,465,568,465 5,922,830,478 zc 20.66471

HITENSION gsb 918.727915

219.28 5,393.95 556.17 1042.37 45.65 3107.55 MURUM 4943404 300

17815 65633 16623 17031 1274 119319 GSB 128816 900

1483021200 MURUM 1746786

115934400 402731 SAND 22562.49

Item Description Unit Quantity Rate

Cutting of trees, including cutting of trunks, branches and removal of stumps,

a Girth from 300 mm to 600 mm nr 139 239

a Cement Concrete Grade M-15 & M-20 cum 0 414

a Up to 600 mm dia m 184

a (a) Bituminous cum 227

a 5th KM stone nr 343

5,032,275 5032184.13 91.92 30200 5031018

33,125 33221 0.61 200 27800

Item No. Quantity

BILL NO. 2 - EARTH WORK

Construction of embankment with approved materials deposited at site from roadway

Construction of embankment with fly ash conforming to Table 1 of IRC:SP:58-2001

Construction of sub-grade and earthen shoulders with approved material

Total for BILL NO. 2 - EARTH WORK

565,547 565558 0.05 50 975100 3 4

738,113,432 738113480 68.74 240.00 1042042560

204,546,363 204546342 19.05 70 185951220

114,204,987 114205084 10.64 240.00 141284640

Item No. Description Unit Quantity Rate

Bill No. 3 - SUB-BASE, BASE-COURSES

a) Grading I cum 1665

Total for Bill No. 3 - SUB-BASE, BASE-COURSES

280,948,900 280949625 56.68 1230 189352350

495,685,808 495685897 100.00 334914430 67.56586

Item No. Description Unit Quantity Rate

BILL NO. 4 - BITUMINOUS PAVEMENT COURSES / CEMENT CONCRETE PAVEMENT

VG-30 cum 6464 7005

VG-30 cum 4181 8182

27,655,529 27655552 2.87 31.5 18535104

6,472,571 6472576 0.67 7.5 4413120

5295744 0.55 8 4707328