The document describes the calculation of inertia base loads for primary and secondary pumps. For the primary pumps, the inertia base is 1650mm by 900mm by 200mm with a point load of 390kg at each of the 4 points. For the secondary pumps, the inertia base is 2050mm by 1100mm by 250mm with a point load of 765kg at each of the 4 points. Both bases will use vibration spring isolators to account for the calculated point loads.
The document describes the calculation of inertia base loads for primary and secondary pumps. For the primary pumps, the inertia base is 1650mm by 900mm by 200mm with a point load of 390kg at each of the 4 points. For the secondary pumps, the inertia base is 2050mm by 1100mm by 250mm with a point load of 765kg at each of the 4 points. Both bases will use vibration spring isolators to account for the calculated point loads.
The document describes the calculation of inertia base loads for primary and secondary pumps. For the primary pumps, the inertia base is 1650mm by 900mm by 200mm with a point load of 390kg at each of the 4 points. For the secondary pumps, the inertia base is 2050mm by 1100mm by 250mm with a point load of 765kg at each of the 4 points. Both bases will use vibration spring isolators to account for the calculated point loads.
The document describes the calculation of inertia base loads for primary and secondary pumps. For the primary pumps, the inertia base is 1650mm by 900mm by 200mm with a point load of 390kg at each of the 4 points. For the secondary pumps, the inertia base is 2050mm by 1100mm by 250mm with a point load of 765kg at each of the 4 points. Both bases will use vibration spring isolators to account for the calculated point loads.
