NCII CSS INTERVIEW QUESTIONS:

1. What is the corresponding value of 120 Gigabyte in Megabyte value?

1024 X 120 = 122, 880 MB
2. What if the computer won't tum on, what are the possible problems and what are your solutions?
POWER SUPPLY CONNECTORS, IT WAS NOT PROPERLY INSERTED. MY SOLUTION IS TO INSERT IT PRORPERLY SO THAT IT WILL TURN ON.

3. If you encounter a prompt "Reboot and select proper boot device or insert boot media in selected boot device” what does it mean and how do you solve this problem?
IT MEANS SHUTDOWN & INSERT THE BOOTABLE FLASHDRIVE PROPERLY.

4. If you're going to install x64 software application on a 32-bit Operating System, will it run? And if not what is your suggestion to continue installing it?
NO. BOTH SHOULD BALANCE. IF IT IS 32BIT OF OPERATING SYSTEM, THEN INSTALL 32BIT WINDOWS INSTALLER. 64BIT OS – 64BIT WINDOWS
INSTALLER.

5. If you hear a series of long beeps, what would be the problem? How are you going to resolve it?
IT MEANS, THE HARDWARE IS PROBLEM. TO RESOLVE IT YOU MUST CONFIGURE THE RAM, AUDIO & HDD.

6. What should be the problem if the computer tums on but no display? What is the solution?
EITHER THE RAM OR VGA AND INSERT IT PROPERLY.

7. What is the difference between IDE HDD and SATA HDD .Which is faster?
IDE PROVIDES A PARALLEL CONNECTION TO THE STORAGE DEVICE.
SATA PROVIDES A SERIAL CONNECTION TO THE STORAGE DEVICE.
HENCEFORTH SATA IS MUCH FASTER THAN IDE, BECAUSE SATA HDD CAN TRANSFER DATA UP TO 6GB/S WHILE THE IDE LIMITED TO A MAX
OF 133MB/S.

8. You just install a printer on your computer and you can't print, what seem to be the problems? How are you going to resolve it?
EITHER IT'S OFFLINE OR THE PRINTERS CABLE IS NOT INSERTED PROPERLY. TO RESOLVE IT YOU MUST INSERT THE CABLE PROPERLY AND
TURN IT ON SO THAT YOU CAN PRINT.

9. Discuss the steps on how to make a portable bootable installer, and what are the advantages of it?
STEPS
1 OPEN THE PROGRAM RUFUS WITH A DOUBLE CLICK
2 SELECT YOUR USB DRIVE
3 SELECT “CREATE A BOOTABLE DISK USING” & THE OPTION "ISO IMAGE”
4 RIGHT CLICK ON THE CD-ROOM SYMBOL & SELECT THE "IMAGE FILE”
5 UNDER "NEW VOLLIME LABEL” YOU CAN TYPE NAME WHATEVER YOU LIKE FOR YOUR USB DRIVE.
6 CLICK START.
7 YOULL RECEIVE THE WARNING "ALL DATA ON THIS DEVICE WILL BE DESTROYED” CONFIRM IT W/ CLICK "OK".
8 WHEN THE GREEN BAR IS FULL, CLICK "FINISH" & OPEN THE BOOTABLE USB DRIVE.

10. If it happens that your computer is infected with a virus, how are you going remove it? And what are your contingency plans?
OS INSTALLER AND REFORMAT PC.

11. What are you going to do, after installing a new sound card in your computer? How are you going to test?
TO TEST IT PLUG A SPEAKER OR HEADPHONE.

12. What is IP address? Why is it important?

IP ADDRESS MEANS “INTERNET PROTOCOL ADDRESS” IT IS A UNIQUE IDENTIFIER GIVEN TO EVERY MACHINE IN A NETWORK. YES IT IS
IMPORTANT SO THAT YOU CAN CONNECT THE WIFI ADDRESS TO EVERY NETWORK COMPUTERS AND LAPTOPS.

13. What are the classes of IP?

14 Why is it important to provide SSID or WIFI name?

IT IS IMPORTANT BECAUSE IT HELPS TO ENSURE THAT DATA IS BEING TRANSMITTED TO & FROM THE CORRECT NETWORK.

The service set identifier (SSID) is the network name used to logically identify the wireless network. Each network will have a single SSID that
identifies the network, and this name will be used by clients to connect to the network.

15. You just shared a folder, and then it cannot be accessed by some users, what seems to be the problem? How are you going to solve it?
THE PROBLEM IS THAT THE USER DIDN'T KNOW THE IP ADDRESS. TO SOLVE IT, CONFIGURE THE IP NETWORK & CONNECT IT TO EACH
OTHER.

16. You just configure your network and computers can't see each other? What seems to be the problem? How are you going to solve it?
THE PROBLEM IS YOU ARE NOT CONNECTED. CONFIGURE THE IP ADDRESS OR NETWORK SETTINGS & CONNECT IT TO EACH OTHER.

17. What are the color code patches for T568A and T568B?
T568A T568B
WG WO
G O
WO WG
B B
WB WB
O G
WB WB
B B

18. What is the difference between dynamic and static IP?

THE DIFFERENCE BETWEEN DYNAMIC & STATIC IP IS THAT, THE DYNAMIC CHANGES FROM TIME TO TIME UNLIKE STATIC IP, DOES NOT
CHANGE.

19. How are you going to test the connectivity of two devices or computers? Is it important to test the connectivity?
BY USING CMD COMMAND AND IT IS IMPORTANT SO THAT THE TWO DEVICES CAN ACCESS EACH OTHER.
20. What is the role of DHCP server in the network?
PROVIDES & ASSIGNS IP ADDRESS, DEFAULT GATEWAY & OTHER NETWORK PARAMETERS TO CLIENT DEVICES THAT'S HOW IMPORTANT
DHCP ROLE IS.

21. How are you going to access a router not knowing the IP address of it?
TO ACCESS THE ROUTER EVEN IF YOU DON'T KNOWN ITS IP ADDRESS YET. GO TO INTERNET & NETWORK SETTINGS OR FIND THE BOX OF
THE ROUTER AND CHECK THE IP ADDRESS OR USING CMD COMMAND.

22. In case you forgot the password for your client. How are you going to reset the password?

23. What is the minimum amount of storage space required for the Active Directory installation files?
MINIMUM AMOUNT OF STORAGE SPACE REQUIRED FOR ACTIVE DIRECTORY INSTALLATION FILES IS 4 GB MINIMUM OF HARD DISK, FOR
INSTALLING SOFTWARE 256 MB OF FREE DISK SPACE IS REQUIRED LOG DIRECTORY. ALL WINDOWS COMPATIBLE PROCESSORS ARE
SUPPORTED.

24. You are now joining the client to the domain but it happens that there is a problem in joining the domain, what would be the problem and how are you going to
resolve it?
THE PROBLEM IS THAT THE CLIENTS IPV4 ADDRESS SETTINGS IS MISTAKEN. TO SOLVE IT, GO TO IPV4 ADDRESS SETTINGS AND CONFIGURE
IT.

25. How are you going to access your domain server from a far location using your client computer?
BY USING WIFI.

26. What may be the reason why you cannot access and connect to other computers remotely? How would you resolve the problem?
THE REASON WHY YOU CANNOT ACCESS TO OTHER OR COMPUTERS REMOTELY IS MAYBE IT'S POSSIBLE THAT THE COMPUTER YOU
REMOTE WAS NOT ”ALLOWED REMOTE CONNECTIONS” TO THE COMPUTERS REMOTE SETTINGS. YOU NEED TO "ALLOW REMOTE
CONNECTIONS” TO THIS COMPUTER FIRST.

27. What are you going to do to secure the domain server?

TO SECURE THE DOMAIN SERVER. JUST PUT A SECURED PASSWORD ON IT.

28. What are the possible causes when you cannot connect or access files to other computer?
IPV4 SETTIINGS MISTAKEN AND FOLDER SHARING PERMISSION NOT YET SET UP.

29. What are the possible problems if the redirected folders of the clients are not shown in the domain server? How are you going to resolve it?
IF YOU SHARE A FILE, MAKE SURE YOU SHARE IT TO "EVERYONE" . COPY NETWORK PATH & PASTE IT TO ITS ROOTH PATH PROPERLY.

30. You want to join the domain using the laptop but there is a problem in joining the domain, what is the possible problem?
THE POSSIBLE PROBLEM IS THE WIFI PASSWORD YOU NEED TO CONNECT IT FIRST AND THEN CONNECT CLIENT TO LAPTOP & THAT YOU
CAN PROCEED TIL THE END OF ITS PROCESS.

31. Can you still join the network without installing the DHCP Server? How are you going to do it?
YES BY SETTING UP AN IP ADDRESS IN THE PC.