UGRD-IT6200A Data Communication and

Networking 1
1. Home
2. My courses
3. UGRD-IT6200A-2123T
4. Week 10 -11: Subnetting IP Networks
5. Final Quiz 1

Started on Wednesday, 2 March 2022, 2:30 AM

State Finished
Completed on Wednesday, 2 March 2022, 2:35 AM
Time taken 5 mins 11 secs
Marks 19.00/20.00
Grade 95.00 out of 100.00
Question 1
Correct
Mark 1.00 out of 1.00

Flag question

Question text
What happens when two devices on the same subnet are communicating?

Select one:
a.
The data link layer addresses are added to the IP header

b.
The host portion of the IP addresses will be different

c.
The frame will be sent to the default gateway for delivery to the receiving device

d.
The sending device will use ARP to determine the IP address of the receiver
Feedback
Your answer is correct.

Question 2
Correct
Mark 1.00 out of 1.00

Flag question

Question text
Which two statements are true regarding the user EXEC mode? (Choose two.)

Select one or more:

a.
Interfaces and routing protocols can be configured

b.
This is the default mode on an unconfigured router when first powered up.

c.
All router commands are available

d.
Only some aspects of the router configuration can be viewed

e.
Global configuration mode can be accessed by entering the enable command
Feedback
Your answer is correct.

Question 3
Correct
Mark 1.00 out of 1.00

Flag question

Question text
Which two components are added to the PDU at the network access layer? (Choose two.)

Select one or more:

 a.
HTTP header

b.
Trailer

c.
frame header

d.
TCP header

e.
IP header
Feedback
Your answer is correct.

Question 4
Correct
Mark 1.00 out of 1.00

Flag question

Question text
What are the parts of an IPv4 address? (Choose two.)

Select one or more:

a.
Broadcast
b.
Host
c.
Network
d.
Subnet mask
e.
Next hop

Question 5
Correct
Mark 1.00 out of 1.00

Flag question

Question text
What will a network administrator use to modify a configuration on a Cisco router?

Select one:
a.
a control panel

b.
the Windows command prompt

c.
Windows Explorer

d.
a DHCP server

e.
IOS
Feedback
Your answer is correct.

Question 6
Correct
Mark 1.00 out of 1.00

Flag question

Question text
Which message delivery option is used when all devices need to receive the same message
simultaneously?

Select one:
 a.
duplex

b.
broadcast

c.
multicast

d.
unicast
Feedback
Your answer is correct.

Question 7
Correct
Mark 1.00 out of 1.00

Flag question

Question text
What is an advantage of using standards to develop and implement protocols?

Select one:
a.
A particular protocol can only be implemented by one manufacturer

b.
Standard provide flexibility for manufacturers to create devices that comply with unique
requirements

c.
Different manufacturers are free to apply different requirements when implementing a
protocol

d.
Products from different manufacturers can interoperate successfully
Feedback
Your answer is correct.

Question 8
Correct
Mark 1.00 out of 1.00

Flag question

Question text
What three functions are defined by network protocols to allow communication between
known source and destination IP addresses? (Choose three.)

Select one or more:

a.
message size

b.
end-device installation

c.
data encoding

d.
delivery options

e.
connector specifications

f.
media selection
Feedback
Your answer is correct.

Question 9
Correct
Mark 1.00 out of 1.00

Flag question

Question text
Which statement is correct about network protocols?

Select one:
 a.
Network protocols define the type of hardware that is used and how it is mounted in racks

b.
They are only required for exchange of message between devices on remote network

c.
They define how messages are exchanged between the sources and the destination

d.
They all function in the network access layer of TCP/IP
Feedback
Your answer is correct.

Question 10
Incorrect
Mark 0.00 out of 1.00

Flag question

Question text
try loop-ba
A Answer  address is defined as a reserved address that routes packets back to the
host

Question 11
Correct
Mark 1.00 out of 1.00

Flag question

Question text
What is the purpose of protocols in data communications?

Select one:
a.
determining the electronic specifications to enable the communication

b.
specifying the bandwidth of the channel or medium for each type of communication

c.
specifying the device operating systems that will support the communication

d.
providing the rules required for a specific type of communication to occur
Feedback
Your answer is correct.

Question 12
Correct
Mark 1.00 out of 1.00

Flag question

Question text
Which two statements are true of the deterministic access method?(Choose two.)

Select one or more:

a.
The order of transmission is dictated by the node that asks first for the token

b.
The throughput is predictable

c.
Devices take turns transmitting

d.
It is a very efficient method because there are no collisions

e.
Each device has to transmit before passing the token to the next device
Feedback
Your answer is correct.

Question 13
Correct
Mark 1.00 out of 1.00
 Flag question

Question text
Which two factors influence the method that is used for media access control? (Choose
two.)

Select one or more:

a.
how connection between nodes appears to the data link layer

b.
how signals are encoded by the NICs on end devices

c.
how the IP protocol forwards the packet to the destination

d.
how nodes share the media

e.
how data is generated by end devices applications
Feedback
Your answer is correct.

Question 14
Correct
Mark 1.00 out of 1.00

Flag question

Question text
light
In fiber optic meda, the signals are represented as patterns of Answer .

Question 15
Correct
Mark 1.00 out of 1.00
 Flag question

Question text
Which two message timing mechanisms are used in data communication? (Choose two.)

Select one or more:

a.
flow control

b.
encapsulation

c.
formatting

d.
response timeout

e.
encoding
Feedback
Your answer is correct.

Question 16
Correct
Mark 1.00 out of 1.00

Flag question

Question text
What command will prevent all unencrypted passwords from displaying in plain text in a
configuration file?

Select one:
a.
(config) # enable secret Encrypted_Password

b.
(config) # enable secret Secret_Password

c.
(config-line) # password secret

d.
(config) # service password-encryption

e.
(config)# enable password secret
Feedback
Your answer is correct.

Question 17
Correct
Mark 1.00 out of 1.00

Flag question

Question text
Which organization develops the 802 family of standard for wired and wireless LANs and
MANs?

Select one:
a.
ISOC

b.
ISO

c.
IANA

d.
IEEE

e.
ITU-T
Feedback
Your answer is correct.
Question 18
Correct
Mark 1.00 out of 1.00

Flag question

Question text
Which is a function of the Logical Link Control (LLC) sublayer?

Select one:
a.
to accept segments and package them into data units that are called packets

b.
to identify which network layer protocol is being used

c.
to define the media access processes that are performed by the hardware

d.
to provide data link layer addressing
Feedback
Your answer is correct.

Question 19
Correct
Mark 1.00 out of 1.00

Flag question

Question text
Which logical address is used for delivery of data to a remote network?

Select one:
a.
destination IP address

b.
destination MAC address
 c.
source MAC address

d.
source IP address

e.
destination IP address
Feedback
Your answer is correct.

Question 20
Correct
Mark 1.00 out of 1.00

Flag question

Question text
What type of delivery uses data link layer addresses?

Select one:
a.
remote delivery using routers

b.
local delivery

c.
remote delivery

d.
local and remote delivery
Feedback
Your answer is correct.