GW2028W Industrial Router: 3G, LTE DIN Rail Mount Router

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

GW2028W Industrial Router

3G, LTE DIN Rail Mount Router


Applications:
• Telemetry
• SCADA
• Roadside
• Global wireless markets
Hardware features:
• DIN rail mounting
• 3G, LTE
• Quad Ethernet ports
• RS232 and RS485 serial ports
• Digital inputs for event detection
• Relay contact options

Overview Connection Monitoring & Dual Advanced Security and Routing


The Virtual Access GW2028W router is a SIM Features
versatile LTE wireless router suitable for a The connection monitor ensures the The GW2028W router offers the highest
variety of industrial deployments. The compact GW2028W router delivers maximum level of VPN (IPSec and SSL) encryption and
and rugged structure makes it a suitable availability so long as the cellular network advanced routing features. The inbuilt stateful
product for deployments where remote is available. For critical applications a dual firewall offers the user compliance to
access to OT networks in harsh environments SIM architecture ensures that a backup LTE IEC 62443 and IEC 62351 industrial cyber
is required such as CCTV, telemetry, SCADA, network can take over should the primary security standards.
smart grid, digital signage, and intelligent network fail. The GW2028W router detects a
traffic systems. network problem and fails over to a standby Centralised Management and
The product line supports 4G/LTE connectivity SIM/APN. Zero Touch Deployment
as well as legacy HSPA+, HSPA, UMTS, EDGE, The GW2028W router benefits from
GPRS and GSM. SMS Commands
Activator, Virtual Access' centralised
The GW2028W router also supports SMS, so
Quad Ethernet Ports if the packet switched side of the network configuration management and monitoring
is down you can still send commands to system. Activator simplifies and automates
The GW2028W router offers 4 x 10/100
the router to perform diagnostics or even a deployment, management and support tasks
Mbps Ethernet interfaces. Ports can be fully
segmented using VLAN and 802.1q. reload. in managed network environments. The
zero-touch deployment functionality built
Digital Inputs and Output into Activator means GW2028W routers
Two digital inputs are provided that can can be deployed without the need of onsite
be used to detect remote contact states configuration or even knowledge of IP or LTE
for monitoring door open/close or PIR networks.
detectors or similar. Custom scripts can be
written to determine the action to be taken SLA ROUTER REMOTE
ANALYTICS
STATISTICS
on the detection of an input state change. REPORTING PROVISIONING MANAGEMENT
DIAGNOSTICS

Syslog events, SNMP traps or emails can be


generated.
There is also a relay contact output. This can
be controlled by a script on detecting any
event within the device, or it can be controlled Internet Activator
Monitor

remotely.
Serial Ports 3G, LTE

The RS232 serial and RS485 options facilitate


direct connectivity to serial devices and enable
remote console access. GW2028W

Security Smart Grid Road Signage ATM


Software Features SCADA Protocol Conversion LEDS
Management • Protocol conversion including the following: • Power indicator
• SMS management support • IEC 60870-5-104 • Signal strength indicator
• Local and remote advanced configuration • IEC 60870-5-101 • Ethernet activity
through embedded web server and Java • IEC 61850 • Active SIM
applets
• Modbus RTU Cellular Technologies
• HTTP/HTTPS
• Modbus TCP • LTE category 4
• Command Line Interface via SSHv2
• Modbus RTU to TCP automatic • LTE FDD Bands:
• TFTP client download/upload conversion • B1/B2/B3/B4/B5/B7/B8/B12/B13/
• SNMP agent B18/B19/B20/B26/B28
• DNP3
Fault Investigation and Reporting • Serial to Ethernet • LTE TDD Bands:
• Event logging • B38/B39/B40/B41
RTU Functionality
• Syslog support • WCDMA Bands:
• Control of I/O from SCADA master
• Packet tracing • B1/B2/B4/B5/B6/B8/B19
• Protocol conversion
Routing Features • Monitoring of comms. interface status from • GSM Bands:
• IPv4 and IPv6 SCADA master • B2/B3/B5/B8
• DHCP server/client • Basic PLC functions Approvals and Certificates
• DynDNS Terminal Server • EN 60950 safety approval
• NAT • Serial RS232, RS485 to TCP/IP or UDP/IP • EN 55022 and EN 55024 EMC
• NAT Traversal conversion
• IEC 61850-3
• NTP Client • Connects serial ports to TCP or UDP streams
Power
• VLAN support Hardware Features • 18-60V DC input voltage
• Packet filtering LAN Interfaces • Isolated
• Firewall • Quad 10/100 Mbps base-T Ethernet port • 6 Watts maximum
• Port forwarding • Auto detects full- or half-duplex operation Physical and Environment
• BGPv4, OSPF • Auto detects a regular or crossover cable for • IP30
• RIP (v1 and v2) easy connection to a switch or hub
• Unit weight: 500g
• IPSec/L2TP/GRE WAN Interfaces
• Unit size: 40(W) 115(D) 160(H) mm
• DMVPN • Wireless WAN with 3G and LTE options
• SNMP v1/v2/v3 • Ethernet ports can optionally be configured
for WAN use
• TLS 1.2
Serial Interfaces
• 802.1x authentication
Two serial interfaces configured as:
• IEC104
• 2 x RS232, or
• QoS
• 1 x RS232 + 1 x RS485
• VRRP
Digital Inputs
IPSec VPN
• 2 x digital inputs for detecting remote
• IKE Version 2 contact open/close
• X.509 certificates • Scripts define action to be taken on input Operating temperature
• Elliptic Curve Cryptography (ECC) events
• -40oC to +70oC
• SHA2_512 support Digital Output
• PFS • Relay contact output. 30V DC 1A rating NO,
NC and Common
• SCEP
• DH_8192 SIM
• 2 x SIM card socket with slot cover
Antennas
• Supports dual antenna configuration for
diversity

GW2028W Series Models


Article No. Model Power Input Isolated Power Input Ethernet Ports Serial Ports SCADA
3490-02000 GW2028W-QFR-DCi1860 18-60V DC Yes 4 2 Yes

dsht-GW2028 Series-2112_EN_REV. A

You might also like