Scribd Logo
Upload

Welcome to Scribd!

  • 19 views

    Maxtec: Specifications, Max-12C Oxygen Sensor

    Uploaded by

    Bashir Mtwakl
    This document provides specifications for an oxygen sensor: 1. It outputs 8.0-13.0 mV in standard conditions and has an operating temperature range of 10-40°C. 2. Interference is according to standard DIN EN ISO 80601-2-55 and it has an expected life of over 1 million oxygen-hours under normal conditions. 3. Additional specifications include a measurement range of 0-100% oxygen, 90% response time of less than 12 seconds, and linearity of less than 3% when calibrated in 100% oxygen.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Maxtec: Specifications, Max-12C Oxygen Sensor

    Uploaded by

    Bashir Mtwakl
    19 views2 pages
    This document provides specifications for an oxygen sensor: 1. It outputs 8.0-13.0 mV in standard conditions and has an operating temperature range of 10-40°C. 2. Interference is according to standard DIN EN ISO 80601-2-55 and it has an expected life of over 1 million oxygen-hours under normal conditions. 3. Additional specifications include a measurement range of 0-100% oxygen, 90% response time of less than 12 seconds, and linearity of less than 3% when calibrated in 100% oxygen.

    Original Title

    R109P53-max-12c-specifications

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications for an oxygen sensor: 1. It outputs 8.0-13.0 mV in standard conditions and has an operating temperature range of 10-40°C. 2. Interference is according to standard DIN EN ISO 80601-2-55 and it has an expected life of over 1 million oxygen-hours under normal conditions. 3. Additional specifications include a measurement range of 0-100% oxygen, 90% response time of less than 12 seconds, and linearity of less than 3% when calibrated in 100% oxygen.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    19 views2 pages

    Maxtec: Specifications, Max-12C Oxygen Sensor

    Uploaded by

    Bashir Mtwakl
    This document provides specifications for an oxygen sensor: 1. It outputs 8.0-13.0 mV in standard conditions and has an operating temperature range of 10-40°C. 2. Interference is according to standard DIN EN ISO 80601-2-55 and it has an expected life of over 1 million oxygen-hours under normal conditions. 3. Additional specifications include a measurement range of 0-100% oxygen, 90% response time of less than 12 seconds, and linearity of less than 3% when calibrated in 100% oxygen.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    8 7 6 5 4 3 2 1

    D 1. Output: D
    9. Interference:
    8.0 to 13.0 mV in air at 1013 milibar pressure, According to DIN EN ISO 80601-2-55
    50% RH and 25 C
    10. Expected Life:
    2. Operating Temperature:
    >1,000,000% - oxygen-hours under normal operating conditions.
    10 to 40 C 11. Humidity:

    3. Maximum Storage Temperature: Up to 100% Relative Humidity non-condensing

    12. Electrical Interface:


    C -20 to 50 C C

    3-Pin Molex
    4. Optimal Storage Temperature:
    Released

    5 to 30 C

    5. Range of Measurement (Full Scale):

    0 to 100% oxygen

    6. Zero Offset:
    B B

    < 0.3 mV in 100% nitrogen after 5 min.

    7. 90% Response Time:

    Less than or equal to 12 seconds at 25 C

    8. Linearity:

    < 3% when calibrated in 100% oxygen

    A
    REVISION DETAIL
    maxtec R

    SPECIFICATIONS, MAX-12C
    A
    REMOVED STABILITY NOTE AND SALT LAKE CITY, UTAH

    REPLACED INTERFERENCE UNLESS OTHERWISE SPECIFIED OXYGEN SENSOR


    DIMENSIONS ARE IN INCHES AND PER
    INFORMATION WITH "ACCORDING TO ASME Y14.5-2009
    SIZE DWG. NO. REV
    DIN EN ISO 80601-2-55"
    B
    .XX = .01 ANGLES

    R109P54 E
    TP-0001 REV 01

    .XXX = .005 0 30'


    .XXXX= .002
    DRAWN BY: DATE:

    Z. HANSEN 8/6/18 SCALE: 1:1 SHEET 1 OF 2


    PROPRIETARY INFORMATION
    8 7 6 5 4 3 2 1 OF MAXTEC
    8 7 6 5 4 3 2 1

    D D

    1.235±0.012

    0.570±0.012

    LOCKING LATCH
    C C

    1.300±0.020 (-) (+)


    Released

    1.575±0.020

    3 PIN MOLEX CONNECTOR

    B B

    M16x1

    1.075±0.012

    A A

    SIZE DWG. NO. REV

    B R109P54 E
    TP-0001 REV 01

    SCALE: NONE SHEET 2 OF 2


    PROPRIETARY INFORMATION
    8 7 6 5 4 3 2 1 OF MAXTEC

    You might also like