Scribd
Upload
44 views2 pages

Chq-Adaptor Installation Instructions: Hochiki Europe (UK) LTD

This document provides instructions for installing a CHQ-ADAPTOR to allow a "Smart-Fix" CHQ module to be housed in an existing enclosure originally designed for an earlier CHQ module. The instructions describe how to disassemble the CHQ module to remove the printed circuit board, place the board into the CHQ-ADAPTOR, and reassemble it by attaching the circuit board cover. Wiring should then be completed according to the standard installation instructions.

Uploaded by

Angel Hernandez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
44 views2 pages

Chq-Adaptor Installation Instructions: Hochiki Europe (UK) LTD

This document provides instructions for installing a CHQ-ADAPTOR to allow a "Smart-Fix" CHQ module to be housed in an existing enclosure originally designed for an earlier CHQ module. The instructions describe how to disassemble the CHQ module to remove the printed circuit board, place the board into the CHQ-ADAPTOR, and reassemble it by attaching the circuit board cover. Wiring should then be completed according to the standard installation instructions.

Uploaded by

Angel Hernandez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Hochiki Europe (UK) Ltd

CHQ-ADAPTOR
INSTALLATION INSTRUCTIONS
Introduction
The CHQ-ADAPTOR is designed to allow the “Smart-Fix“ range of CHQ Modules to be
housed in existing enclosures originally designed for the first generation CHQ-OEM
Modules by modifying the ‘footprint’ of the unit.

When disassembling the "Smart-Fix“ CHQ Module in preparation for mounting onto the
Adaptor please be aware that the device features a printed circuit board (PCB) which
contains electro-static sensitive components. Observe precautions for handling these
components to avoid damage to the unit.
Assembling the Unit
‰ Locate one of the retaining clips on the
side edge of the PCB cover on the CHQ
Module.
‰ Using a small screw driver, carefully push
the clip inwards whilst lifting the PCB
cover upwards (see Fig 1). When the
PCB cover is removed, the PCB will be
visible.
‰ Hold the PCB by the plastic terminal
blocks (see Fig 2) and carefully remove
from the CHQ Module housing.
‰ Place the PCB into the CHQ Adaptor
ensuring the loop cable connectors sit
within the correct cut- away at the bottom
edge of the raised section of the adaptor
(see Fig 3 overleaf). Fig 1
‰ Take the PCB cover originally removed
from the CHQ Module and position over
the PCB.
‰ Ensure the plastic lugs on the inside
edge of the PCB cover (opposite end to
the holes for the retaining clips) are
engaged in their respective holes. The
retaining clips on the adaptor will now
be lined up with their corresponding
holes on the PCB cover (see Fig 4
overleaf).
‰ Push the two parts together until the
retaining clips engage.
‰ Wire the CHQ Module as per the
installation instructions. Fig 2

2-3-0-795/ISS1/FEB07
2-3-0-795/ISS1/FEB07
Fig 3

Fig 4
CHQ-ADAPTOR
FIXING TEMPLATE
Hochiki Europe (UK) Ltd.
reserves the right to alter
the specification of its
products from time to time
without notice. Although
every effort has been made
to ensure the accuracy of
Position the wired module within

the information contained


an appropriate housing or box

Hochiki Europe (UK) Ltd within this document it is


Grosvenor Road, not warranted or
and secure with appropriate

Gillingham Business ss Park, represented by Hochiki


Gillingham, Kent, ME8 0SA, Europe (UK) Ltd. to be a
England complete and up-to-date
Hochiki Europe (UK) Ltd

fixings (not supplied).

Telephone: +44(0)1634 260133 description. Please check


Facsimile: +44(0)1634 260132 our web site for the latest
email: [email protected] version of this document.
‰

You might also like