TFT LCD Module Datasheet ER-TFTM070-4V2.

1
EastRising
EA

buydisplay.com

0B

1B ER-TFTM070-4V2.1
2B TFT LCD Module Datasheet

ISO9001
Registered Company

sira
CERTIFICATION
011

3B

EastRising Technology Co., Limited

4B Attention:
A. Some specifications of IC are not listed in this datasheet. Please refer to the IC datasheet for more details.

B. The related documents for interfacing, demo code, ic datasheet are all available, please download from our web.

C. Please pay more attention to “INSPECTION CRITERIA” in this datasheet. We assume you already agree with these criterions

when you place an order with us. No more recommendations.

7B

REV
8B3 DESCRIPTION
9B4 RELEASE DATE
10B5

1.0
1B6 Preliminary Release
12B7 Mar-19-2013
13B

2.0 Add Micro SD Card Slot on board Aug-20-2013

2.1 Add Capacitive Touch Panel with its Controller and Connector Nov-29-2013

URL: www.buydisplay.com Document Name: ER-TFTM070-4V2.1 Datasheet Page: 1 of 23

 TFT LCD Module Datasheet ER-TFTM070-4V2.1
EastRising
EA

buydisplay.com

CONTENTS
15B0H

18BH 1. ORDERING INFORMATION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 04 U

1.1 Order Number - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -- - - - - - - - - - - - - - - - - - - - - - - - 04

19B4H H

1.2 Optional Accessory List - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -- - - - - - - - - - - - - - - - - - - - - - - - 04

20B15H H21B

1.3 Image - - - -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 05 H21B

21B8HU 2. SPECIFICATION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 06 U

2.1 Display Specification - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 06

2B194H

2.2 Mechanical Specification - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 06

23B015H

24B1H H 2.3 Electrical Specification - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 06

2.4 Optical Specification - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 06
25B1H

26B31HU 3. OUTLINE DRAWING- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 07

3.1 Outline Drawing with 4-wire Resistive Touch Panel - - - - - - - - - - - - - - -- - - - - - - - - - - - - - - - - - 07

3.2 Outline Drawing with 4-wire Capacitive Touch Panel - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 08
23B015H H U

21B8HU 4. ELECTRICAL SPEC - - -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 09 U

4.1 Pin Configuration-JP2/CON1 (Parallel Interface) - - - - - - - - - - - - - - - - - -- - - - - - - - - - - - - - - - - -

2B194H 09
4.2 Pin Configuration –JP1/CON6 (Flash Chip/Font Chip Interface) - - - - - - - - - - - - - - - - - - - - - - - - -
23B015H H 10
24B1H H H 4.3 4.3 Pin Configuration-JP3/CON2 (Micro SD Card Interface) - - - - - - - - - - - - - - - - - - - - - - - - - - - 11 H5B21

4.4 Jump Point Description - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11

4.5 Absolute Maximum Ratings - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
23B015H H 12 H5B21

H 4.6 Electrical Characteristics - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

H 12 H5B21

H31B2869 5. INSPECTION CRITERIA - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 13

5.1 Acceptable Quality Level - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

32B970H 13 H

5.2 Definition of Lot - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

3B0281H 13 H

5.3 Condition of Cosmetic Inspection - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

34B129H 13 H5B21

5.4 Module Cosmetic Criteria - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

35B204H 14 H5B21

5.5 Screen Cosmetic Criteria (Non-Operating) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

36B14H 16 H5B21

5.6 Screen Cosmetic Criteria (Operating) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

37B42H 17 H5B21

38B54H

URL: www.buydisplay.com Document Name: ER-TFTM070-4V2.1 Datasheet Page: 2 of 23

 TFT LCD Module Datasheet ER-TFTM070-4V2.1
EastRising
EA

buydisplay.com

6. PRECAUTIONS FOR USING - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 19

6.1 Handling Precautions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

39B641H 19
6.2 Power Supply Precautions- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
40B3752H 20
6.3 Operating Precautions - - - - - - - - - - - - - - - - - - -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
41B386H 20
6.4 Mechanical/Environmental Precautions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
42B397H 20
6.5 Storage Precautions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
43B08H 20
6.6 Others - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
4B139H 20

B40H 7. USING LCD MODULES - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

H 21

7.1 Liquid Crystal Display Modules - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

46B31H 21
7.2 Installing LCD Modules - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
47B2H 21
H H

7.3 Precaution for Handling LCD Modules - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

48B53H 21
7.4 Electro-Static Discharge Control- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
49B6H 22
7.5 Precaution for Soldering to EastRising LCM- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
50B47H 22
7.6 Precaution for Operation - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
51B486H 23 H

7.7 Limited Warranty - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

52B497H 23
53B048H 7.8 Return Policy - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
H 23

URL: www.buydisplay.com Document Name: ER-TFTM070-4V2.1 Datasheet Page: 3 of 23

 TFT LCD Module Datasheet ER-TFTM070-4V2.1
EastRising
EA

buydisplay.com

1. ORDERING INFORMATION
54B197

1.1 Order Number

5B2461

Part Number(Order Number) Description

ER-TFTM070-4V2.1 TFT LCD display module with SSD1963 controller

ER-DBTM070-4 Demo Board for ER-TFTM070-4

1.2 Optional Accessory List (We give customer’s more freedom to build your own display)
Attention: The accessory you select would be mounted on board by default except flash memory chip.
67B1584No Accessory for Parallel Interface Qty Position on Board
ZIF connector in 40 pins(1 piece is soldered on board, the another is used
1 2 CON1
on customer’s board)
FFC in 40 pins, 100mm length,1.00mm pitch used to connect display with
2 1 CON1
customer’s board
67B1584No Accessory for MicroSD Card Interface Qty Position on Board

3 Micro SD Card Slot(Mounting on board by default) 1 MicroSD Card Slot

ZIF connector in 8 pins (1 piece is soldered on board, the another is used on

4 2 CON2
customer’s board)
FFC in 8 pins,100mm length,1.00mm pitch used to connect display with
5 1 CON2
customer’s board

6 MicroSD Card (Not mounting on board by default) 1 N/A

67B1584No Accessory for 4-wire Resistive Touch Panel Qty Position on Board

7 7 inch 4-wire Resistive Touch Panel (Mounting on board by default) 1 CON3

8 ZIF connector in 4 pins (Mounting on board by default) 1 CON3

9 4-wire Resistive Touch Panel Controller 1 U6

67B1584No Accessory for Capacitive Touch Panel Qty Position on Board

10 7 inch Capacitive Touch Panel (Mounting on board by default) 1 CON5

11 ZIF connector in 30 pins (Mounting on board by default) 1 CON5

12 Capacitive Touch Panel Controller 1 U7

67B1584No Accessory for Flash and Font Chip Interface Qty Position on Board

13 Flash Memory Chip (Not mounting on board by default) 1 U1

14 Font Chip (Mounting on board by default) 1 U8

URL: www.buydisplay.com Document Name: ER-TFTM070-4V2.1 Datasheet Page: 4 of 23

 TFT LCD Module Datasheet ER-TFTM070-4V2.1
EastRising
EA

buydisplay.com
ZIF connector in 8 pins (1 piece is soldered on board, the another is used on
15 2 CON6
customer’s board)
FFC in 8 pins,100mm length,1.00mm pitch used to connect display with
16 1 CON6
customer’s board

1.3 Image

58B214039

with Capacitive Touch Panel with 4-wire Resistive Touch Panel

URL: www.buydisplay.com Document Name: ER-TFTM070-4V2.1 Datasheet Page: 5 of 23

 TFT LCD Module Datasheet ER-TFTM070-4V2.1
EastRising
EA

buydisplay.com

2. SPECIFICATION
2.1 Display Specification
40B59376

60B574 ITEM STANDARD VALUE

61B584 62B594 UNIT
Display Format
63B057 800（RGB）x 480 Dots
64B158 --
65B29

Display Connector
6B308 FFC or Pin Header
67B419 --
68B5270

FPC Connector
69B3 40/8 Pins,1.0mm Pitch, SMD Horizontal Type Top contact --
Operating Temperature
70B648 -20 ~ +70
71B685
℃
72B698

Storage Temperature
73B0689 -30 ~ +80
74B16890
75B2691 ℃
Touch Panel Optional Yes 81B75 --
Sunlight Readable
82B796 83B07 No --
84B17

2.2 Mechanical Specification H H

ITEM
86B30 STANDARD VALUE
87B41 UNIT
8B52

Diagonal Size
89B63 7.0 91B85 inch
Outline Dimension(PCB) 180.0 x 104.0 mm
Active Area
92B86 154.08 x 85.92 mm
93B087

Dot Pitch
9B63 0.0642(W) x 0.1790(H) mm mm 10B985

Gross Weight
102B96 331
103B97 g
104B98

2.3 Electrical Specification

ITEM
106B3 STANDARD VALUE
107B4 UNIT
108B52

IC Package
109B637 SMT
10B742 --
1B085

Controller
12B0967 SSD1963
13B072 --
14B08

Interface
15B209 8080/6800,8-bit/9-bit/16-bit/18-bit/24-bit Parallel
96B --
17B4

Response Time (Typ) 20 ms

2.4 Optical Specification H H

ITEM
19B63 STANDARD VALUE
120B74 UNIT
12B85

LCD Type
12B9653 TFT-LCD / Transmissive / Negative
123B0754 --
124B85

Viewing Angle Range

128B56 Left:60, Right:60, Up:60, Down:60
129B63 deg
130B2746

Colors
13B2856 65K/262K/16.7M
132B9 --
13B02758

Contrast Ratio (Typ)

134B2859 500:1
135B --
136B0

Brightness (Typ) 200 cd/m2

URL: www.buydisplay.com Document Name: ER-TFTM070-4V2.1 Datasheet Page: 6 of 23

 TFT LCD Module Datasheet ER-TFTM070-4V2.1
EastRising
EA

buydisplay.com

459B1376 3. OUTLINE DRAWING

3.1 Outline Drawing with 4-wire Resistive Touch Panel
REV. DESCRIPTION OF MODIFY MODIFY BY DATE
A0 1'ST,DESIGN JIM Nov-26-2013

with 4-wire Resistive Touch Panel A1

A2

PCB 180.00±0.3
3.00±0.3 M.H 174.00±0.1
7.50±0.3 TP 165.00±0.3
7.55±0.3 BEZEL 164.90±0.3
9.85±0.3 V,A 156.90±0.2
11.47±0.3 LCD A,A 154.08±0

11.90±0.3 TP A,A 153.10±0

0.1
JP1 .00±
8-? 1
YU
7 8

31.50±0.3
7.62
10.16
1 2

JP2
39 40

40
7 " TFT

W 0.70±0.1
±0.1
LCD A,A 85.92±0

1.00
TP A,A 85.60±0
BEZEL 100.00±0.3

40-?
V,A 89.00±0.2
PCB 104.00±0.3

M.H 98.00±0.1
TP 99.50±0.3

XL 800RGB X 480 XR

48.26

P 1.00±0.05

41.00
39.00
1.70
6 O'CLOCK 2.00

1
10.16
1 2

10.09±0.3
1.50 4.00

YD
2.54

7.62
8-?
1.0
0±0
.1
9.50±0.3
11.04±0.3
11.20±0.3

4-? 5.0
2.00±0.3
2.50±0.3
3.00±0.3

4-
?

FFC 86.00±3.0
3.
20
0
3.70±0.3

MAX 12.0
5.30±0.3

FFC1 is Parallel Interface

0.33±0.05
CONDUCTOR

STIFFENER
6.00±0.5

89.24±2.0
JP1 L2
U1 C1
8

8 7 D1 C3 J8
J1
J2
10.00

CON6

8PIN PITCH1.0 U2
J5
FLASH C2 J6 J9
Flash and Font Chip Interface R1
U8 FONT
2 1
1

CF
L1
RF C42
JP2
40 39 C4 C5 40P05
7
C
40

7 INCH TFT LCD

6
C

C8 C9 U3 CON4
C34 J7 C35
C33 C36
C10
C32 R6
C31 C37 7 INCH TFT LCD
C12
C13 C30 C38 Not installed
U6 C39
C14 C29 C40 R21
C15 C28 C41 R22
R10
CON1

R23
R7

C16 C27
CON1 40P1

40PIN PITCH1.0 R3 C54

R24 R25
R2 C19 C25
C21 U7
Parallel Interface C17 C18 C26 CON3 4P1 C55 C56
R4 C20 C24 C57
8080 R3 ON R4 NC
C22 C58
X1
4 LINE TP

6800 R4 ON R3 NC
C23 R5
CON5
C43 U4 C45 3.3V Power Input J10 Short
C46
C44

5.0V Power Input J10 Open

1

R53
C49

6.00±0.5 2 1
L3
J10
86.00±2.0 JP3 U5 C47
8

8 7
8P1

MicroSD Card Slot

10.00

R11
CON2

R19
R20
R18

2 1
1

L4

R17

BACK
29

CD
EastRising Technology Co.,Ltd
EastRising UNIT: MM SIZE: A4
旭日东方科技有限公司
b
u
y
d
i
s
p
l
a
y
.
c
o
m

SHEET: 1 OF 1

LCM PART NUMBER: ER-TFTM070-4V2.1 REV: A0

DRAWN BY :JIM CHECKED BY : APPROVED BY :

URL: www.buydisplay.com Document Name: ER-TFTM070-4V2.1 Datasheet Page: 7 of 23

 TFT LCD Module Datasheet ER-TFTM070-4V2.1
EastRising
EA

buydisplay.com
3.2 Outline Drawing with Capacitive Touch Panel
REV. DESCRIPTION OF MODIFY MODIFY BY DATE
A0 1'ST,DESIGN JIM Nov-26-2013

with Capacitive Touch Panel A1

A2

PCB 180.00±0.3
3.00±0.3 M.H 174.00±0.1
5.51±0.3 TP 164.00±0.3
7.55±0.3 BEZEL 164.90±0.3
9.85±0.3 V,A 154.80±0.2
11.26±0.3 TP A,A 154.50±0
11.47±0.3 LCD A,A 154.08±0

0.1
JP1 .00±
7 8
8-? 1

31.50±0.3
7.62
10.16
1 2

JP2
39 40

40
7 " TFT

W 0.70±0.1
±0.1
LCD A,A 85.92±0

1.00
TP A,A 86.50±0
BEZEL 100.00±0.3

40-?
V,A 90.70±0.2
PCB 104.00±0.3

M.H 98.00±0.1
TP 98.00±0.3

800RGB X 480

41.00
48.26

P 1.00±0.05
39.00
1.70
6 O'CLOCK 2.00

1
10.16
1 2

10.09±0.3
1.50 4.00
2.54

7.62
8-?
1.0
0±0
. 1
10.55±0.3
10.75±0.3
11.04±0.3

4-? 5.0
2.00±0.3
3.25±0.3
3.00±0.3

4-
?

FFC 86.00±3.0
3.
20
0
3.70±0.3

MAX 12.0
5.30±0.3

0.33±0.05
CONDUCTOR

STIFFENER
6.00±0.5

89.24±2.0
JP1 L2
U1 C1
8

8 7 D1 C3 J8
J1
J2
10.00

CON6

8PIN PITCH1.0 J5
FLASH C2 U2 J9
Flash and Font Chip Interface R1 J6
U8 FONT
2 1
1

CF
L1
RF C42
JP2
40 39 C4 C5 40P05
C7
40

7 INCH TFT LCD

6
C

C8 C9 U3 Not installed CON4

C34 J7 C35
C33 C36
C10
C32 R6
C37 7 INCH TFT LCD
C12 C31
C13 C30 C38
U6 C39
C14 C29 C40 R21
C15 C28 C41 R22
40PIN PITCH1.0
R10

R23
R7
CON1

C16
CON1 40P1

C27
Parallel Interface R3 C54
R25
R2 C19 C25 R24
C21 CON3 C55 U7
C17 C18 C26 4P1 C56
R4 C20 C24 C57
8080 R3 ON R4 NC C22 C58
6800 R4 ON R3 NC X1
C23 R5
CON5
C43 U4 C45 3.3V Power Input J10 Short
C46
C44

5.0V Power Input J10 Open

1

R53
C49

6.00±0.5 2 1
L3
J10
86.00±2.0 JP3 U5 C47
8

8 7
8P1

MicroSD Card Slot

10.00

R11
CON2

8PIN PITCH1.0
MicroSD Card Interface
R18
R19
R20

2 1
1

L4

R17

BACK

CD
EastRising Technology Co.,Ltd
138B524607

EastRising UNIT: MM SIZE: A4

旭日东方科技有限公司
b
u
y
d
i
s
p
l
a
y
.
c
o
m

SHEET: 1 OF 1

LCM PART NUMBER: ER-TFTM070-4V2.1 REV: A0

DRAWN BY :JIM CHECKED BY : APPROVED BY :

URL: www.buydisplay.com Document Name: ER-TFTM070-4V2.1 Datasheet Page: 8 of 23

 TFT LCD Module Datasheet ER-TFTM070-4V2.1
EastRising
EA

buydisplay.com

4. ELECTRICAL SPEC
4.1 Pin Configuration-JP2/CON1 (Parallel Interface)
48B139562 H

Pin No Symbol Descriptions

1 VSS Ground

2 VDD Power Supply

3 /CS Chip Select, Active Low

4 D/C Data/Command Select

6800 Mode: E(enable signal)

5 E_/RD
8080 Mode: RD#(read strobe signal)
6800 Mode: R/W#
0:Write cycle
6 R/W_/WR
1:Read cycle
8080 Mode: WR#(write strobe signal)
7 E/RESET_NC Master synchronize reset, Active Low

8 TE Tearing effect
Data bus. Pins not used should be floating
8-bit MCU interface: DB0-DB7;
9-bit MCU interface: DB0-DB8;
9-32 DB0-DB23
16-bit MCU interface: DB0-DB15;
18-bit MCU interface: DB0-DB17;
24-bit MCU interface: DB0-DB23;
Chip Select Input. Active Low Logic Input. This input provides the dual function of
TP CS_XR initiating conversions on the XPT2046 and also enables the serial input/output
33 register.
External low signal reset the chip. RC reset circuit on board, this pin can be left
CTP_/RST
unconnected.
External Clock Input. Logic Input. DCLK provides the serial clock for accessing data
TP CLK_XL
from the part. This clock input is also used as the clock source for the XPT2046
34 conversion process.
CTP SCL Serial clock input
Data In. Logic input. Data to be written to the XPT2046 control register is provided
TP DIN_YU on this input and is clocked into the register on the rising edge of DCLK (see the
35 Control Register section).

CTP_SDA Serial data input/output

URL: www.buydisplay.com Document Name: ER-TFTM070-4V2.1 Datasheet Page: 9 of 23

 TFT LCD Module Datasheet ER-TFTM070-4V2.1
EastRising
EA

buydisplay.com
Data Out. Logic Output. The conversion result from the XPT2046 is provided on this
TP DOUT_YD output as a serial data stream.The bits are clocked out on the falling edge of the
36
DCLK input. This output is high impedance when CS is high.
CTP_INT An interrupt signal to inform the host processor that touch data is ready for read

TP BUSY_VSS BUSY Output. Logic Output. This output is high impedance when CS is high.

37
An interrupt signal for the host to change F5206 from hibernates to active mode.
CTP_WAKE CTP INT: An interrupt signal to inform the host processor that touch data is ready
for read

38 TP PEN_VSS Pen Interrupt. CMOS logic open-drain output

39 BL_ON/OFF Backlight control signal

40 VSS Ground

Note : CTP means Capacitive Touch Panel. TP means 4-wire Resistive Touch Panel

4.2 Pin Configuration –JP1/CON6 (Flash Chip/Font Chip Interface)

Pin No Symbol Descriptions

1 GPIO1 These pins can be configured for display miscellaneous signals or as

general purpose I/O. Default as input.
2 GPIO2

3 FONT CHIP_/CS Font Chip Select Signal. Low Active.

4 FLASH/FONT_DI Flash Memory or Font Chip Serial Data Input.

5 FLASH/FONT_CLK Flash Memory or Font Chip Serial Clock Input.

6 FLASH_/WP Flash Memory Write Protect Input.

7 FLASH/FONT_DO Flash Memory or Font Chip Serial Data Output.

8 FLASH_/CS Flash Memory Chip Select Signal

Note: Flash and font chip is optional accessory. No flash or font chip by default.

URL: www.buydisplay.com Document Name: ER-TFTM070-4V2.1 Datasheet Page: 10 of 23

 TFT LCD Module Datasheet ER-TFTM070-4V2.1
EastRising
EA

buydisplay.com
4.3 Pin Configuration-JP3/CON2 (Micro SD Card Interface)
SD Mode SPI Mode
Pin No Symbol Pin No Symbol
1 DATA2 1 NC
2 DATA3 2 /CS
3 CMD 3 DIN
4 CLK 4 SCLK
5 GND 5 GND
6 DATA0 6 DOUT
7 DATA1 7 NC
8 CARD DETECTION 8 CARD DETECTION

4.4 Jump Point Description

Jump No Description

J3 Short ,J4 Open: Select backlight control signal with SSD1963

J3 J4
J4 Short ,J3 Open: Select backlight control signal with external input
Solder 0 ohm resistor on R3 , R4 no connection: 8080 Interface
R3,R4
Solder 0 ohm resistor on R4 , R3 no connection: 6800 Interface

J8 Short: External Bezel Ground

J9 Short: Mechanical Hole Ground

J10 Short: Vdd=3.3V Power Supply Open: Vdd=5V Power Supply

Note: We leave J3,J8,J9,J10 open and J4 short by default.

We solder 0 ohm resistor on R3 and leave R4 no connection by default

URL: www.buydisplay.com Document Name: ER-TFTM070-4V2.1 Datasheet Page: 11 of 23

 TFT LCD Module Datasheet ER-TFTM070-4V2.1
EastRising
EA

buydisplay.com

4.5 Absolute Maximum Ratings H H

43B251087 ITEM
25B496 SYMBOL
253B047 MIN.
254B18 TYP.
25B49 MAX.
256B30 UNIT
257B41

Power Supply Voltage

258B VDD
VC -0.5 - +5.5 V
260B574V

Logic signal voltage

261B58 VDDIO
26B59 -0.5 - +4.6 V
operating temperature
263B057 Top
264B158T -20 - +70 °C
storage temperature
265B9 TST
26B30 -30 - +80 °C
Humidity RH - 90%(Max60°C) RH

4.6 Electrical Characteristics H H

ITEM
268B5 SYMBOL
269B3 MIN.
271B685 TYP.
27B69 MAX.
273B06 UNIT
274B168

Power supply voltage VDD -- 3.3 3.6 V

4.8 5.0 5.2 V
Logic signal I/O voltage VDDIO 3.0 3.3 3.6 V
Input voltage'H'level VIH 0.8VDDIO - VDDIO+0.5 V
Input voltage'L'level VIL -- - 0.2VDDIO V

Output voltage'H'level VOH 0.8VDDIO - -- V

Output voltage'L'level VCL -- - 0.2VDDIO V

IDD(3.3V) -- -- 480 mA
Model Current
IDD(5.0V) -- -- 300 mA

Note1: Short J10 if VDD=3.3V

286B3094

URL: www.buydisplay.com Document Name: ER-TFTM070-4V2.1 Datasheet Page: 12 of 23

 TFT LCD Module Datasheet ER-TFTM070-4V2.1
EastRising
EA

buydisplay.com

5. INSPECTION CRITERIA
5.1 Acceptable Quality Level
H287B4130

Each lot should satisfy the quality level defined as follows

28B5

PARTITION
289B63 AQL
290B874 DEFINITION
291B85

A. Major
29B86 0.4%
293B087 Functional defective as product
294B18

B. Minor
295B8 1.5%
296B30 Satisfy all functions as product but not satisfy cosmetic standard
297B41

5.2 Definition of Lot

298B5436

One lot means the delivery quantity to customer at one time.

29B63

5.3 Condition of Cosmetic Inspection H

◆ INSPECTION AND TEST

301B2985

-FUNCTION TEST 302B96

-APPEARANCE INSPECTION 30B297

-PACKING SPECIFICTION 304B1298

◆ INSPECTION CONDITION
305B29

- Put under the lamp (20W) at a distance 100mm from

306B

- Tilt upright 45 degree by the front (back) to inspect LCD appearance.

307B41

◆ AQL INSPECTION LEVEL

308B52

- SAMPLING METHOD: MIL-STD-105D

309B6

- SAMPLING PLAN: SINGLE 310B74

- MAJOR DEFECT: 0.4% (MAJOR) 31B085

- MINOR DEFECT: 1.5% (MINOR) 312B096

- GENERAL LEVEL: II/NORMAL 31B07

314B

URL: www.buydisplay.com Document Name: ER-TFTM070-4V2.1 Datasheet Page: 13 of 23

 TFT LCD Module Datasheet ER-TFTM070-4V2.1
EastRising
EA

buydisplay.com
438B15209

5.4 Module Cosmetic Criteria

NO. Item Judgment Criterion Partition
1 Difference in Spec. None allowed Major
2 Pattern Peeling No substrate pattern peeling and floating Major
3 Soldering defects No soldering missing Major
No soldering bridge Major
No cold soldering Minor
4 Resist flaw on substrate Invisible copper foil(￠0.5mm or more)on substrate pattern Minor
5 Accretion of metallic No soldering dust Minor
Foreign matter No accretion of metallic foreign matters(Not exceed￠0.2mm)
6 Stain No stain to spoil cosmetic badly Minor
7 Plate discoloring No plate fading,rusting and discoloring Minor
8 Solder amount a. Soldering side of PCB Minor

1.Lead parts Solder to form a’Filet’

all around the lead.
Solder should not hide the
lead form perfectly.(too much)
b.Components side
(In case of ‘Through Hole PCB’)

Solder to reach the Components side of PCB

2.Flat packages Either ‘toe’(A) or ‘heal’ (B) of Minor

the lead to be covered by ‘Filet’.
A B

Lead form to be assume over

Solder.

3.Chips (3/2) H≧h≧(1/2)H Minor

h H

URL: www.buydisplay.com Document Name: ER-TFTM070-4V2.1 Datasheet Page: 14 of 23

 TFT LCD Module Datasheet ER-TFTM070-4V2.1
EastRising
EA

buydisplay.com
9 Backlight defects 1.Light fails or flickers.(Major)
2. Color and luminance do not correspond to specifications. See
(Major) list
3.Exceeds standards for display’s blemishes, foreign matter, ←
dark lines or scratches.(Minor)
10 PCB defects Oxidation or contamination on connectors.*
2. Wrong parts, missing parts, or parts not in specification.*
3.Jumpers set incorrectly.(Minor) See
4.Solder(if any)on bezel,LED pad,zebra pad,or screw hole list
pad is not smooth.(Minor) ←
*Minor if display functions correctly.Major if the display fails.

11 Soldering defects 1. Unmelted solder paste. Minor

2. Cold solder joints,missing solder connections,or oxidation.*
3. Solder bridges causing short circuits.*
4. Residue or solder balls.
5. Solder flux is black or brown.
*Minor if display functions correctly.Major if the display fails.

URL: www.buydisplay.com Document Name: ER-TFTM070-4V2.1 Datasheet Page: 15 of 23

 TFT LCD Module Datasheet ER-TFTM070-4V2.1
EastRising
EA

buydisplay.com

5.5 Screen Cosmetic Criteria (Non-Operating)

No. Defect Judgment Criterion Partition

1 Spots In accordance with Screen Cosmetic Criteria (Operating) No.1. Minor

2 Lines In accordance with Screen Cosmetic Criteria (Operation) No.2. Minor
3 Bubbles in Minor
Polarizer Size: d mm Acceptable Qty in active area
d≦0.3 Disregard
0.3<d≦1.0 3
1.0<d≦1.5 1
1.5<d 0

4 Scratch In accordance with spots and lines operating cosmetic criteria, When the Minor
light reflects on the panel surface, the scratches are not to be remarkable.
5 Allowable density Above defects should be separated more than 30mm each other. Minor
6 Coloration Not to be noticeable coloration in the viewing area of the LCD panels. Minor
Back-lit type should be judged with back-lit on state only.
7 Contamination Not to be noticeable. Minor

URL: www.buydisplay.com Document Name: ER-TFTM070-4V2.1 Datasheet Page: 16 of 23

 TFT LCD Module Datasheet ER-TFTM070-4V2.1
EastRising
EA

buydisplay.com
5.6 Screen Cosmetic Criteria (Operating) H41B267385

No. Defect Judgment Criterion Partition

1 Spots A) Clear Minor
Size:d mm Acceptable Qty in active area
d≦0.1 Disregard
0.1<d≦0.2 6
0.2<d≦0.3 2
0.3<d 0
Note: Including pin holes and defective dots which must be within one pixel
Size.
B) Unclear
Size:d mm Acceptable Qty in active area
d≦0.2 Disregard
0.2<d≦0.5 6
0.5<d≦0.7 2
0.7<d 0
2 Lines A) Clear Minor

L 5.0 (0)
8

2.0 (6) See No.1

W
0.02 0.05 0.1

Note: () – Acceptable Qty in active area

L - Length (mm)
W -Width(mm)
∞-Disregard
B) Unclear

L 10.0 (0)
8

(6)

2.0 See No.1

W
0.05 0.3 0.5

‘Clear’ = The shade and size are not changed by Vo.

‘Unclear’ = The shade and size are changed by Vo.

URL: www.buydisplay.com Document Name: ER-TFTM070-4V2.1 Datasheet Page: 17 of 23

 TFT LCD Module Datasheet ER-TFTM070-4V2.1
EastRising
EA

buydisplay.com
No. Defect Judgment Criterion Partition
3 Rubbing line Not to be noticeable.
4 Allowable density Above defects should be separated more than 10mm each other. Minor
5 Rainbow Not to be noticeable. Minor
6 Dot size To be 95%~105%of the dot size (Typ.) in drawing. Minor
Partial defects of each dot (ex.pin-hole) should be treated as’spot’.
(see Screen Cosmetic Criteria (Operating) No.1)
7 Brightness Brightness Uniformity must be BMAX/BMIN≦2 Minor
(only back-lit - BMAX :Max.value by measure in 5 points
Module) - BMIN : Min.value by measure in 5 points
Divide active area into 4 vertically and horizontally.
Measure 5 points shown in the following figure.

8 Contrast Contrast Uniformity must be BmAX/BMIN≦2 Minor

Uniformity Measure 5 points shown in the following figure.
Dashed lines divide active area into 4 vertically and horizontally.
Measuring points are located at the inter-sections of dashed line.

Note: BMAX – Max.value by measure in 5 points.

BMIN – Min.value by measure in 5 points.
O – Measuring points in ￠10mm.

Note:
(1) Size : d=(long length + short length)/2
(2) The limit samples for each item have priority.
(3) Complexed defects are defined item by item, but if the number of defects is defined in above table, the total
number should not exceed 10.
(4) In case of ‘concentration’, even the spots or the lines of ‘disregarded’ size should not be allowed. Following three
situations
Should be treated as ‘concentration’.
-7 or over defects in circle of ￠5mm.
-10 or over defects in circle of ￠10mm

URL: www.buydisplay.com Document Name: ER-TFTM070-4V2.1 Datasheet Page: 18 of 23

 TFT LCD Module Datasheet ER-TFTM070-4V2.1
EastRising
EA

buydisplay.com
-20 or over defects in circle of ￠20mm

319B6452 6. PRECAUTIONS FOR USING

6.1 Handling Precautions
◆ This device is susceptible to Electro-Static Discharge (ESD) damage. Observe Anti-Static precautions.
321B85

◆ EastRising display panel is made of glass. Do not subject it to a mechanical shock by dropping it or impact.
32B196

◆ If EastRising display panel is damaged and the liquid crystal substance leaks out, be sure not to get any in
32B017

your mouth. If the substance contacts your skin or clothes, wash it off using soap and water.
◆ Do not apply excessive force to the EastRising display surface or the adjoining areas since this may cause
324B18

the color tone to vary.

◆ The polarizer covering the EastRising display surface of the LCD module is soft and easily scratched.
325B19

Handle this polarizer carefully.

◆ If EastRising display surface becomes contaminated, breathe on the surface and gently wipe it with a soft
326B0

dry cloth. If it is heavily contaminated, moisten cloth with one of the following Isopropyl or alcohol.
◆ Solvents other than those above-mentioned may damage the polarizer. Especially, do not use the Water.
327B41

◆ Exercise care to minimize corrosion of the electrode. Corrosion of the electrodes is accelerated by water
328B5

droplets, moisture condensation or a current flow in a high-humidity environment.

◆ Install the EastRising LCD Module by using the mounting holes. When mounting the LCD module make
329B6

sure it is free of twisting, warping and distortion. In particular, do not forcibly pull or bend the cable or the
backlight cable.
◆ Do not attempt to disassemble or process EastRising LCD module.
30B274

◆ NC terminal should be open. Do not connect anything.

31B285

◆ If the logic circuit power is off, do not apply the input signals.
32B96

◆ To prevent destruction of the elements by static electricity, be careful to maintain an optimum work
3B027

environment.
-Be sure to ground the body when handling EastRising LCD modules.
34B128

-Tools required for assembling, such as soldering irons, must be properly grounded.
35B29

-To reduce the amount of static electricity generated, do not conduct assembling and other work under dry
36B0

conditions.
-The LCD module is coated with a film to protect the display surface. Exercise care when peeling off this
37B41

protective film since static electricity may be generated.

URL: www.buydisplay.com Document Name: ER-TFTM070-4V2.1 Datasheet Page: 19 of 23

 TFT LCD Module Datasheet ER-TFTM070-4V2.1
EastRising
EA

buydisplay.com

6.2 Power Supply Precautions

◆ Identify and, at all times, observe absolute maximum ratings for both logic and LC drivers. Note that there is
38B524619

some variance between models.

◆ Prevent the application of reverse polarity to VDD and VSS, however briefly.
340B7

◆ Use a clean power source free from transients. Power-up conditions are occasionally jolting and may
341B85

exceed the maximum ratings of EastRising modules.

◆ The VDD power of EastRising module should also supply the power to all devices that may access the
342B96

display. Don’t allow the data bus to be driven when the logic supply to the module is turned off.
43B0752198

6.3 Operating Precautions H41B267385

◆ DO NOT plug or unplug EastRising module when the system is powered up.
345B29

◆ Minimize the cable length between EastRising module and host MPU.
346B0

◆ For models with backlights, do not disable the backlight by interrupting the HV line. Unload inverters
347B1

produce voltage extremes that may arc within a cable or at the display.
◆ Operate EastRising module within the limits of the modules temperature specifications.
348B52

6.4 Mechanical/Environmental Precautions

349B652 H41B267385

◆ Improper soldering is the major cause of module difficulty. Use of flux cleaner is not recommended
350B47

as they may seep under the electrometric connection and cause display failure.
351B48

◆ Mount EastRising module so that it is free from torque and mechanical stress.
352B496

◆ Surface of the LCD panel should not be touched or scratched. The display front surface is an easily
35B047

scratched, plastic polarizer. Avoid contact and clean only when necessary with soft, absorbent cotton
dampened with petroleum benzene.
◆ Always employ anti-static procedure while handling EastRising module.
354B18

◆ Prevent moisture build-up upon the module and observe the environmental constraints for storage tem
35B249

◆ Do not store in direct sunlight

356B0

◆ If leakage of the liquid crystal material should occur, avoid contact with this material, particularly ingestion.
357B41

If the body or clothing becomes contaminated by the liquid crystal material, wash thoroughly with water and
soap
468B352

6.5 Storage Precautions H41B267385

When storing the LCD modules, avoid exposure to direct sunlight or to the light of fluorescent lamps.
359B6

Keep EastRising modules in bags (avoid high temperature / high humidity and low temperatures below 0C
360B574

Whenever possible, EastRising LCD modules should be stored in the same conditions in which they were
361B58

shipped from our company.

458B3629

6.6 Others H41B267385

Liquid crystals solidify under low temperature (below the storage temperature range) leading to defective
36B057

orientation or the generation of air bubbles (black or white). Air bubbles may also be generated if the module
is subject to a low temperature.
If EastRising LCD modules have been operating for a long time showing the same display patterns, the
364B158

URL: www.buydisplay.com Document Name: ER-TFTM070-4V2.1 Datasheet Page: 20 of 23

 TFT LCD Module Datasheet ER-TFTM070-4V2.1
EastRising
EA

buydisplay.com
display patterns may remain on the screen as ghost images and a slight contrast irregularity may also
appear. A normal operating status can be regained by suspending use for some time. It should be noted that
this phenomenon does not adversely affect performance reliability.
To minimize the performance degradation of the LCD modules resulting from destruction caused by static
365B29

electricity etc., exercise care to avoid holding the following sections when handling the modules.
-Exposed area of the printed circuit board.
36B0

-Terminal electrode sections.

367B41

69B3845 362B

7. USING LCD MODULES H H

7.1 Liquid Crystal Display Modules

369B14507 H41B267385

EastRising LCD is composed of glass and polarizer. Pay attention to the following items when handling.
370B64

◆ Please keep the temperature within specified range for use and storage. Polarization degradation, bubble
371B685

generation or polarizer peel-off may occur with high temperature and high humidity.
◆ Do not touch, push or rub the exposed polarizers with anything harder than an HB pencil lead (glass,
372B69

tweezers, etc.).
◆ N-hexane is recommended for cleaning the adhesives used to attach front/rear polarizers and reflectors
37B06

made of organic substances which will be damaged by chemicals such as acetone, toluene, ethanol and
isopropylalcohol.
◆ When EastRising display surface becomes dusty, wipe gently with absorbent cotton or other soft material
374B168

like chamois soaked in petroleum benzin. Do not scrub hard to avoid damaging the display surface.
◆ Wipe off saliva or water drops immediately, contact with water over a long period of time may cause
375B269

deformation or color fading. 376B0

◆ Avoid contacting oil and fats.

37B41

◆ Condensation on the surface and contact with terminals due to cold will damage, stain or dirty the polarizers.
378B52

After products are tested at low temperature they must be warmed up in a container before coming is
contacting with room temperature air.
◆ Do not put or attach anything on EastRising display area to avoid leaving marks on.
379B6

◆ Do not touch the display with bare hands. This will stain the display area and degradate insulation
380B74

between terminals (some cosmetics are determinated to the polarizers).

381B75

◆ As glass is fragile. It tends to become or chipped during handling especially on the edges. Please
382B796

avoid dropping or jarring. 38B07

7.2 Installing LCD Modules H41B267385

◆ Cover the surface with a transparent protective plate to protect the polarizer and LC cell.
384B17259

◆When assembling the LCM into other equipment, the spacer to the bit between the LCM and the fitting
386B0

plate should have enough height to avoid causing stress to the module surface, refer to the individual
387B41

specifications for measurements. The measurement tolerance should be±0.1mm.

URL: www.buydisplay.com Document Name: ER-TFTM070-4V2.1 Datasheet Page: 21 of 23

 TFT LCD Module Datasheet ER-TFTM070-4V2.1
EastRising
EA

buydisplay.com

7.3 Precaution for Handling LCD Modules

Since EastRising LCM has been assembled and adjusted with a high degree of precision; avoid applying
389B6

excessive shocks to the module or making any alterations or modifications to it.

◆ Do not alter, modify or change the shape of the tab on the metal frame.
390B874

◆ Do not make extra holes on the printed circuit board, modify its shape or change the positions of
391B85

components to be attached.
◆ Do not damage or modify the pattern writing on the printed circuit board.
392B86

◆ Absolutely do not modify the zebra rubber strip (conductive rubber) or heat seal connector.
39B087

◆ Except for soldering the interface, do not make any alterations or modifications with a soldering iron.
394B18

◆ Do not drop, bend or twist EastRising LCM.

395B28

7.4 Electro-Static Discharge Control H41B267385

Since this module uses a CMOS LSI, the same careful attention should be paid to electrostatic discharge as
397B41

for an ordinary CMOS IC.

◆ Make certain that you are grounded when handing LCM.
398B52

◆ Before remove LCM from its packing case or incorporating it into a set, be sure the module and your body
39B6

have the same electric potential.

◆ When soldering the terminal of LCM, make certain the AC power source for the soldering iron does not leak.
40B397

◆ When using an electric screwdriver to attach LCM, the screwdriver should be of ground potentiality to
401B3985

minimize as much as possible any transmission of electromagnetic waves produced sparks coming from the
commutator of the motor.
◆ As far as possible make the electric potential of your work clothes and that of the work bench the ground
402B396

potential.
◆ To reduce the generation of static electricity be careful that the air in the work is not too dried. A relative
403B97

humidity of 50%-60% is recommended.

7.5 Precaution for Soldering to EastRising LCM

◆ Observe the following when soldering lead wire, connector cable and etc. to the LCM.
46B0158392

-Soldering iron temperature : 280℃±10℃

406B3

-Soldering time: 3-4 sec.

407B1

-Solder: eutectic solder.

408B52

If soldering flux is used, be sure to remove any remaining flux after finishing to soldering operation. (This
409B63

does not apply in the case of a non-halogen type of flux.) It is recommended that you protect the LCD
surface with a cover during soldering to prevent any damage due to flux spatters.
◆ When soldering the electroluminescent panel and PC board, the panel and board should not be detached
410B7

more than three times. This maximum number is determined by the temperature and time conditions
mentioned above, though there may be some variance depending on the temperature of the soldering iron.
◆ When remove the electroluminescent panel from the PC board, be sure the solder has completely melted,
41B085

the soldered pad on the PC board could be damaged.

URL: www.buydisplay.com Document Name: ER-TFTM070-4V2.1 Datasheet Page: 22 of 23

 TFT LCD Module Datasheet ER-TFTM070-4V2.1
EastRising
EA

buydisplay.com

7.6 Precaution for Operation H41B267385

◆ Viewing angle varies with the change of liquid crystal driving voltage (VO). Adjust VO to show the best
413B07

contrast.
◆ Driving the EastRising LCD in the voltage above the limit shortens its life.
41B08

◆ Response time is greatly delayed at temperature below the operating temperature range. However, this
415B209

does not mean the LCD will be out of the order. It will recover when it returns to the specified temperature
range.
◆ If EastRising display area is pushed hard during operation, the display will become abnormal. However, it
416B30

will return to normal if it is turned off and then back on.

◆ Condensation on terminals can cause an electrochemical reaction disrupting the terminal circuit. Therefore,
417B

it must be used under the relative condition of 40℃, 50% RH.

◆ When turning the power on, input each signal after the positive/negative voltage becomes stable.
418B52

7.7 Limited Warranty H41B267385

Unless agreed between EastRising and customer, EastRising will replace or repair any of its LCD modules
49B163 420B17

which are found to be functionally defective when inspected in accordance with EastRising LCD acceptance
standards (copies available upon request) for a period of one year from date of shipments. Cosmetic/visual
defects must be returned to EastRising within 90 days of shipment. Confirmation of such date shall be based
on freight documents. The warranty liability of EastRising limited to repair and/or replacement on the terms set
forth above. EastRising will not be responsible for any subsequent or consequential events.

7.8 Return Policy

No warranty can be granted if the precautions stated above have been disregarded. The typical examples of
2B4196

violations are:
-Broken LCD glass. 423B017

-PCB eyelet damaged or modified.

42B18

-PCB conductors damaged.

425B19

-Circuit modified in any way, including addition of components.

426B30

-PCB tampered with by grinding, engraving or painting varnish.

427B1

-Soldering to or modifying the bezel in any manner.

428B5

Module repairs will be invoiced to the customer upon mutual agreement. Modules must be returned with
429B63

sufficient description of the failures or defects. Any connectors or cable installed by the customer must be
removed completely without damaging the PCB eyelet’s, conductors and terminals

430B275

That’s the end of the datasheet.

URL: www.buydisplay.com Document Name: ER-TFTM070-4V2.1 Datasheet Page: 23 of 23