Scribd
Upload
70 views11 pages

Example 21.1 Stiffness Method Truss

1) The document analyzes a statically indeterminate frame using the stiffness method. 2) It presents the general stiffness matrix for a beam element and calculates the individual stiffness matrices for each member of the frame. 3) The individual stiffness matrices are summed to obtain the overall stiffness matrix for the frame, which is then reduced using boundary conditions. 4) The reduced stiffness matrix is inverted and multiplied by the applied loads to solve for unknown displacements at nodes 2 and 3. 5) Member forces are then calculated by multiplying the element stiffness matrices by the displacements.

Uploaded by

Sarah Haider
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
70 views11 pages

Example 21.1 Stiffness Method Truss

1) The document analyzes a statically indeterminate frame using the stiffness method. 2) It presents the general stiffness matrix for a beam element and calculates the individual stiffness matrices for each member of the frame. 3) The individual stiffness matrices are summed to obtain the overall stiffness matrix for the frame, which is then reduced using boundary conditions. 4) The reduced stiffness matrix is inverted and multiplied by the applied loads to solve for unknown displacements at nodes 2 and 3. 5) Member forces are then calculated by multiplying the element stiffness matrices by the displacements.

Uploaded by

Sarah Haider
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 11

Example 1

Analyse the frame shown in the figure below:


(Note that it is statically indeterminate, but the method still works)
30 kN 2
3

1.5m

4
Ɵ
1

2.0m

Assume constant EA =20

Structures E2 1
The general stiffness matrix for a beam element is:

Fx1 = (AE/L) cos2a (AE/L) cosa sina -(AE/L) cos2a -(AE/L) cosa sina U1
Fy1 (AE/L) cosa sina (AE/L) sin2a -(AE/L) cosa sina -(AE/L) sin2a V1
Fx2 -(AE/L) cos2a -(AE/L) cosa sina (AE/L) cos2a (AE/L) cosa sina U2
Fy2 -(AE/L) cosa sina -(AE/L) sin2a (AE/L) cosa sina (AE/L) sin2a V2

The values of EA, L and Ɵare:


Member EA Length Inclination
12 20 1.5 90
23 20 2.0 0
34 20 1.5 -90
13 20 2.5 36.87
42 20 2.5 -36.87

Inserting these values into each individual stiffness matrix gives:

Structures E2 2
With 4 nodes there be (4 x 2=8) possible displacements so the
general stiffness matrix will be (8 x 8)
Structures E2 3
Structures E2 4
We can then add up these 5 matric es to get:

Structures E2 5
Clearly both operations could be done as one, but my method is a lot less
prone to errors.

We can also apply the loads

Next, introduce boundary conditions. In this case the displacement at each


support iszero: U1 =V1 =U4 =V4 =0

Structures E2 6
This can then be compressed by deleting the irrelevant rows and
columns:

Structures E2 7
Invert the stiffness matrix (+MINVERSE):

Multiply this inverted matrix by the applied load to get the (unknown)
displacements at nodes 2 and 3 (+MMULT):

Structures E2 8
We can use these displacements to calculate internal forces (in the X
and Y directions) by multiplying the element stiffness matrices by these
displacements (+MMULT): :

Structures E2 9
Axial Force =√𝑋𝑋2 + 𝑌𝑌2
These are the forces in each
member in the X-X and Y-Y This gives:
direction.

It is more useful to consider the


forces along the member
(axial) and perpendicular to
the member (shear).

Since the shear forces in all


members is zero, we can
simply get the axial force by
getting the resultant of the X-X
and Y-Y forces.

Structures E2 10
Note that to establish whether the force is compression or tension, the
forces need to be drawn on the member.
A simple hand calculation of the reactions and by using the method of joints you
can figure out if the member internal force is whether tension or compression

C
T C

22.5 kN 22.5 kN

THIS CONCLUDES THE STIFFNESS METHOD


Structures E2 11

You might also like