Construction Systems: With Unlimited Design

CONSTRUCTION
SYSTEMS
WITH UNLIMITED DESIGN
2015-16
3
1/2015-16
4
Revestech®
> Contents
page
1. Outdoors waterproofing systems 6
Walk on roofs and terraces

DRY80 System 8
Balconies, sills and inner courtyards

Dry40 P System and DRY50 System 14
Pitched Roofing
AIR System 15
Non-walk on roofs / Walk on roofs with elevated flooring

AluDry System 16
Multifunction System for walkable roofs

ACU200 System 20
2. Swimming Pools waterproofing systems 23
Swimming Pools
POOL 120 System 24
3. Indoors waterproofing systems 30
Bathrooms and wet areas

DRY50 System 32
4. Special Solutions 48
Grass installation
Root and Joint 50
Uncoupling / Waterproofing
Ditec3 52
1 1
> Innovation
from day one
Revestech is the Grandchild of Miguel Martinez Ramirez
> Strategic and
International
Alliances
Group new company aiming to invest in the future. Our
Production partnerships are one of the pillars in our
philosophy has mainly been based on entrepreneurial
business. A great number of prestigious companies in
innovation and focused on the study, development and
the domestic and international markets work with us and
production of plastic materials in order to supply a wide
trust our company to manufacture for them their own
variety of professional sectors since 1945. That year our
waterproofing high-tech membrane mats. This way, our
group starts its course as textile plastics producer in
innovative solutions reach our customers all over the
Alicante (Spain).
world.
> We are
manufacturers
Throughout our extensive history we have acquired the
> Commitment
to quality
Our high-tech waterproofing geo-membrane mats
experience and the knowledge to become todays are certified with the CE marking and are designed to
manufactures of our revolutionary construction system. meet with the latest requirements and regulations of
With our new brand Revestech we have defined our the Building Codes with the maximum warranty. All the
position as a reliable and trustworthy partner of products of our systems are traceable at all times allowing
architects, quantity/building surveyors, project managers, us to identify and register every single product from the
constructors, builders, distributors, installation technicians beginning of the production process to the very end of
as well as the general public in order to resolve the usual the commercial chain.
problems surrounding the waterproofing, soundproofing,
decoupling-uncoupling, insulation, moisture/vapor For this reason we have verified through rigorous
management and drainage working systems. We can now and extensive tests taken place in different research
offer a number of unique products of the best quality, laboratories so as to assure, guarantee and certify every
excellent price, easy installation and total efficiency in single one of our products.
order to guarantee that we are today’s best choice in the
market and that we have the perfect solutions for our
customers.
Believing in
> State-of-the-art
systems
Our brand new systems represent the outcome of the
> sustanaible
development
latest manufacturing techniques designed to meet up All Revestech products are eco-friendly as we strongly
with the actual market demand. The fibres veil of our high- believe in sustainable development. For that reason we
tech geo-membrane mats is essential to guarantee the have developed a good practice code that allow us to
mortar high bonding strength with the ceramic tiling; This reduce the negative impact of our activities over the
way, professionals will save time avoiding the installation environment such as waste treatment management
of any compression layer, making their task as simple as which we separate at the source, depending on material
tiling the floors or walls. or mixture, in order to proceed with the recycling process.
2
> Non-stop
researching
Revestech main impulse lies in our interest about
re-thinking spaces; we have devoted a great deal of
time and effort to study and design the best systems
for our customers with the purpose of providing the
whole spectrum of solutions within any construction
venture. Our R+D department is continuously thinking
and researching in new projects as well as taking part
in numerous lab and field tests before launching our
products to the market. Also, we have developed an
institutional collaboration agreement through various
commissioned research projects with the Alicante
University-Faculty of Chemistry in order to undertake a
joint working venture for implementation testing of all
our products.
Revestech
> training:
implicating the
professionals
in our bussines
Revestech Training means our commitment with our
installation technicians’ network. Free training courses
and seminars are offered and take place at least once
a month both within and outside our factory with the
aim of sharing our experience and knowledge in relation
to our waterproofing and insulation systems with a wide
range of professionals who are officially accredited with
a certified Revestech installer diploma.
3
4
Revestech®
> To do
the job of
others easier.
That’s our
mission!
REVESTECH is the most convenient, efficient
and effective solution for professionals such
as architects, quantity/building surveyors,
project managers, constructors, builders and
installation technicians in order to resolve all
waterproofing and isolation pathologies of
each and every project and construction site.
Our original systems allow us to re-think and

consider spaces for both refurbishment and
new construction works, with a common
aim: simplicity.
Our products are characterized by their

easy, fast and practical installation as well as
their exceptional high quality. We focus on
making life easier to our customers.
Technical Assistance:
[email protected]
www.revestech.com
If you need additional technical or professional information, check on

our webpage www.revestech.com where you can find specific details in
relation to all our products, Technical Data Sheets and Installation Guides.
?
5
6
Outdoors
waterproofing
systems
> Walk on roofs and terraces
DRY80 System
> Balconies, sills and inner courtyards

DRY40 P System
DRY50 System
> Pitched Roofing

AIR System
> Non-walk on roofs / Walk on roofs

with elevated flooring
ALUDRY System
> Indoor and outdoor

multifunction system
ACU200 System
7
Walk on roofs and terraces
DRY80
WATERPROOFING SYSTEMS FOR ROOFING AND TERRACES.
Flexible sheet for waterproofing of flat roofs with fixed flooring protection (roofs, terraces, backyards, patios).
Easy solution No need to dig out Thin set method

DRY 80 is the perfect roofing system. DRY80 main advantage is that it is not There is hardly a minimum height
Installation is so simple that no previous necessary to clean up debris. That increase since it does not need a
experience is required. means you can install the new floor compression layer. First, install the
tile just over the old floor due to the DRY80 membrane with 4mm latex
membrane in between which will modify thin-set mortar over the old floor;
prevent any type of cracking in the then, in no waiting time, install the new
future. tiles over the DRY80 membrane.
TO RENEW YOUR
TERRACE COSTS
LESS THAN YOU
COULD EVER
IMAGINE!
Less time, less money
Our system not only saves you time
because there is no waiting time for
the compression layer to set which
otherwise would be a minimum of 48 hrs
(at the best) to prevent any cracking, but
also saves you money on labour costs.
8
Revestech®
DRY80
DRY80’s waterproofing membrane is of easy and practical installation
Flexible and elastic

DRY80 is installed with adhesive cement, like a tile, and no special tools are required. Due to the flexibility and elasticity of the
membrane sheet, both angles and corners will appear perfectly finished.
More versatile solutions

DRY80 does not present any chemical incompatibility with cement or with tar which simplifies all kinds of refurbishment work. It
does not require any separation layer of geotextile or mortar to put up with the surface, which would reduce the height. It does
not require to remove and / or to prepare the old floor tiles.
Our solution allows DRY80 to waterproof all sorts of tiled covers such as terraces, roofs, patios, balconies, staircases, etc.
Avoid any kind of problems

DRY80 not only prevents all types of mould,
mildew, weeds, grass, etc but eliminates all kinds
of cracking on the pavement which, in a logical
manner, responds to the normal expansion and
contraction of the compression layer itself. Due to
our system which does not need a compression
layer, height increase after renovation should be
minimal.
9
DRY80
WATERPROOFING SYSTEMS FOR ROOFING AND TERRACES.
Flexible sheet for waterproofing flat roofs with fixed flooring protection. It is formed by a double sheet of thermoplastic
polyolefin in coextruction which both sides are coated with non-woven polyester fibres to facilitate the best adherence of
the tile adhesive-mortars used during the installation process.
No waiting time Faster

No need to wait while installing tiled As a whole system, to install 90 m2 of
terraces, balconies, verandas etc. The diaphanous terrace requires a single Check our root drainage baseline
floor is attached with the tile adhesive- union; however, with 1 x 10 m asphalt solution to install artificial
mortar directly to our DRY80 membrane sheet reels you would need... eight synthetic grass in terraces.
sheet. No need for a bed of cement welding joints!
mortar, or a separating layer such as a
geotextile.
NEW WORKS
Terrace waterproofing
1. New floor surface of your choice
2. Cement glue/mortar
3. DRY80membrane sheet
4. Concrete floor
Refurbishment WORKS
Terrace waterproofing
1. New floor surface of your choice
2. Cement glue/mortar
3. DRY80membrane sheet
4. Old floor surface
5. Concrete floor
*. Our vertical waterproofing system allows us to eliminate the usual moisture conditions which show up in humid areas, typically
baseboards, window sills and other complex and critical spots.
10
Outdoors waterproofing systems
DRY80
Installation instructions
Is placed directly on the old surface without the need to remove the existing covering.
1. When cleaning the surface, it is 2. Layout, measurement and cutting the 3. Apply cement adhesive C2 on the old
advisable to use caustic soda for more membrane. surface. Properly secure the membrane
effective cleaning. to the surface, making sure to remove
with the trowel all the air pockets that
can be generated.
1º Between the layers. 2º Over each joint.
4. Overlap the sheets always starting 5. Apply Seal Plus adhesive between the 6. Apply more Seal Plus adhesive over
from the drain upwards. Leave an overlap overlapping layers. (1). each joint.
of at least 10 cm.
7. Use DRY80 Cornerin, Cornerout and 8.Tile directly onto membrane, using 9. Work completed quickly, easily and
SuMI 56 in problematic areas. C2 adhesive cement and fit the tiled with quality assurance.
skirting.
11
DRY80 0,8 mm 625 g/m2
DRY80 membrane sheet

Description Reference Presentation
2
Waterproof DRY80 30 1,5 x 30m (45m ) roll
membrane sheet
DRY80 20 1,5 x 20m (30m2) roll
DRY80 10 1,5 x 10m (15m2) roll
DRY80 5 1,5 x 5m (7,5m2) roll
Accessories
Waterproof DRY80 Cornerin 2 pieces per bag

reinforcement for angles
DRY80 Cornerout 2 pieces per bag
Waterproof DRY80 Banda 50 0,48 x 30m roll

reinforcement
union perimeter DRY80 Banda 40 0,38 x 30m roll
strip DRY80 Banda 30 0,29 x 30m roll
DRY80 Banda 20 0,18 x 30m roll
Special adhesive
SEAL PLUS 6 6 kg can
for joints
Coverage: 1 kg = 9 linear metres overlap.

A 6kg tub will cover 45 linear metres.
Out Ø 32-40 h DRY80 Sumi56 100 1 piece box.

Grid 10x10 cm Membrane sheet 75 x 75 cm
Roofing ventilation
chimney Chimenea 1 piece box
DRY80 Sumi siphoned

Parahojas 1 piece box
drain protection
Horizontal evacuation
Gárgola 1 piece box
attachment
12
DRY80 Features
Meeting of vertical and horizontal membranes
Overlap on
the sheet
10 cm
1 2
Sheet Strip
Fit the band edge of DRY80 to the height of the skirting and 1. Insert the sheet making a 2. Insert the sheet within the
leaving no less than 10 cm of overlap on the sheet. groove in the wall. wall making a recess.
Expansion joint
1 2 3
1 2 3
1 y 3. DRY80 strip. 1. Reinforcement piece.
2. Mopstick 2. Drain.
4. DRY80 sheet. 3. Waterproof membrane.
Finishing the corners
1. Cut mitre and fold the flap inwards. 2. Place either Cornerout or Cornerin and affix using Seal Plus
adhesive.
Finishing around the drain
1. Insert a cut sheet of DRY80 in 2. Cut the Dry 80 sheet as 3. Place DRY80 sheet above and 4. Fit the drain gulley.
the form of a tube- in the drain shown. cut as in the image. Apply mastic
pipe and seal it with an adhesive MS in the joining of the sheet
mastic compatible PVC or ABS with the interior of the drain.
inside and out.
13
Balconies, sills and inner courtyards
SMALL SURFACES
PERFECTLY SEALED
AND COVERED
Waterproofing systems for balconies, sills and inner courtyards.

Waterproof matting for small dimension surfaces. The geo-membrane sheet is adhered with a thin layer cement-based
adhesive under the floors and walls coating.
DRY40 P 0,42 mm 245 g/m2
Reference Presentation
2
DRY40 P 450 1,5 x 30 m (45m ) roll
2
DRY40 P 75 1,5 x 5 m (7,5m ) roll
Description
Flexible waterproof matting for balconies, sills and inner courtyards with an applicable area of less than 10 square metres.
It is manufactured in EVAC with a width of 1.5 metres and both sides coated in polypropylene geo-textile to facilitate the optimum
adherence of the cement-based adhesive used during the installation process. Furthermore, it ensures 100% water tightness as
well as acting as water vapor barrier. It is available in two formats.
DRY50 0,52 mm 335 g/m2
2
DRY50 30 1,2 x 30m (36m ) roll
DRY50 5 1,2 x 5m (6m2) roll
DRY50 450 1,5 x 30m (45m2) roll
DRY50 75 1,5 x 5m (7,5m2) roll
Description
Flexible waterproof matting for balconies, sills and inner courtyards with an applicable area of less than 20 square metres.
It is manufactured in EVAC with a width of 1.2 and 1.5 metres and both sides coated in polyester geotextil to facilitate the optimum
adherence of the cement-based adhesive used during the installation process. Furthermore, it ensures 100% water tightness as well
as acting as water vapor barrier. It is available in four formats.
14
Pitched Roofing
Air
WATERPROOF BREATHEABLE SYSTEMS.
AIR is a waterproof breathable multilayer membrane sheet, is light and AIR 135 0,45 mm 135 g/m2
resistant made of thermoplastic polyolefines. REVESTECH AIR is highly
effective in protection against moisture caused by infiltration and
prevents condensation formation under pitched roofs. It is suitable to
AIR 160 0,55 mm 160 g/m2
use under tile or slate in all kinds of sloped roofing, either hot or cold,
on supports made of concrete, wood or sandwich panels.
Breathable Greater savings

100% waterproof
Being both impermeable to liquid water Installed in combination with an High water vapor permeability
and permeable to water vapor, our adequate vapor barrier, improves Efficient windproof
product protects the insulation system and insulation effectiveness performance
Temperatures range: from
the structure from the action of rainwater which results in money savings as well -40° to 80° Celsius /-40° to 176° Fahrenheit
or snow which is infiltrated by the wind as creating a healthy and comfortable
Good resistance to tearing
or from water/snow in form of leaking, environment for you.
preventing any kind of deterioration in the Permits full use of nails
future. Reduced weight and thickness
Easy installation and handling
Eco-friendly and easy recycling material
2 1. Insulation panel
4 2. Air matting
3. Strips
5 4. Ventilation
5. Water vapour barrier
6. Roof beans
Breathable waterproof AIR 135 1,5 m x 50 m roll

Air 135 membrane sheet (135gr/m2) 1 pallet=25 rolls
Breathable waterproof AIR 160 1,5 m x 50 m roll
Air 160 membrane sheet (160gr/m2) 1 pallet=25 rolls
15
Non-walk on roofs /
Walk on roofs with elevated flooring
ALUDRY
NON-WALK ON ROOFS WATERPROOFING SYSTEM
High-tech geo-membrane sheet for flat roofs. It is formed by a double sheet of thermoplastic polyolefin in coextruction which is
coated on one side with an aluminium layer to protect it from the external agents and on the other side with a polyester geo-textile to
facilitate the best adherence of the tile cement-based adhesive used during the installation process.
Easy solution No need to dig out Incredibly fast

ALUDRY is the perfect system for Its main advantage is the installation Our system saves you time as the
non-trafficable roofs. Installation is so fits over the old substrate avoiding any membrane sheet is straight over the
simple that no previous experience is debris. The membrane sheet can be left base with cement-based adhesive.
required. on view as the finished roofed cover.
SIMPLY
QUALITY
COVERS
High durability
The materials used to manufacture
our ALUDRY membrane sheet
guarantee its long duration as well
as its resistance outdoors under
extreme weather conditions.
16
aludry
Installation directly over the old substrate avoiding any debris. The membrane sheet can be left on view as the finished roofed
cover.
1. Clean the existing substrate; it is 2. Set out, measure and cut the matting. 3. Apply C2 cement-based adhesive
advisable to use caustic soda for a more over the existing substrate.
effective cleaning.
4. Fix and secure properly the geo-mem- 5. We recommend the use of a roller 6. Once the matting is well pressed, use
brane sheet to the substrate surface, compactor when laying large areas. AluDry butyl bands to stick together the
making sure to eliminate every possible membrane sheets.
air pocket that may be generated.
7. Press properly the butyl bands for 8. Use the same AluDry butyl bands for 9. Work done in a quick, simple, easy and
perfect sealing. It could be helpful the angles, corners and the most difficult or 100% quality guaranteed way.
use of a roller compactor or any other problematic spots.
kind of tool.
17
alu dry 0,8 mm 670 g/m2
More versatile solutions.

It does not present any chemical incompatibility with cement or with tar which simplifies refurbishment works. It does not
require, excavating and/or preparing the old substrate.
ALUDRY Membrane sheet

2
Waterproofing ALUDRY 30 1,40 x 30 m (42m ) roll
membrane sheet
ALUDRY 20 1,40 x 20 m (28m2) roll
ALUDRY 10 1,40 x 10 m (14m2) roll
ALUDRY 5 1,40 x 5 m (7m2) roll
Accessories
Self-adhesive ALU BANDA 10 10 cm x 10 m band

band
Special adhesive

Roofing ventilation
Chimenea 1 piece box
chimney
DRY80 Sumi siphoned

drain protection
attachment
18
Easy maintenance
Not only prevents all types of mould, mildew, weeds, grass, etc but eliminates all kinds of cracking on the roof surface and its
maintenance is both simple and economical.
Ideal for installation on trafficable elevated flooring

Do not screw the lifting devices, plots or bolsters directly over the geo-membrane sheet since it could damage or perforate the
sheet. It is convenient to use polyurethane filler or any kind of similar product in order to fix and set the elevation devices.
? If you need additional technical or professional information, check on our webpage www.revestech.com where
you can find specific details in relation to all our products, Technical Data Sheets and Installation Guides.
19
Indoor and outdoor
multifunction system
ACU200
INDOOR AND OUTDOOR MULTIFUNCTION SYSTEM
Our geo-membrane Acu200 is produced with the latest, state-of-the-art extrusion technology for composites manufacturing.
It is based on the union of 4 different layers in order to solve the current needs and regulations required by the Technical
Building Code either indoors and outdoors, such as sound control, water control, horizontal movements of the base control,
steam generated by the base control.
Vapour barrier Crack isolation

The intermediate watertight sheet prevents underground It absorbs any fractures that may occur in the base as well as
dampness and moisture to be transferred to the flooring and the horizontal cracks up to 4mm. It can cover every existing
to the joints, protecting them from efflorescence caused by crack, absorbing the movements that may occur in the future.
capillarity, mildew and / or mould. Some water-soluble salts The American Institute TCNA certifies ACU200 as HIGH
can be transported by rising capillary action through porous PERFORMANCE, under the regulation ANSI A118.12 system
materials and be deposited on its surface once the water crack resistance test.
is evaporated by the effect of the sunlight and/or the air,
triggering all kind of efflorescence and humidity.
IT DOES NOT
5
REQUIRE A
COMPRESSION
LAYER
Covers
1. Tiling
2. Adhesive cement mortar
3. Acu200
4. Framework
5. Band 20 Dry80
Flooring Flooring
ACU200 ACU200
Base
Soundproofing
1 Base
Waterproofing
2
Flooring Flooring
ACU200 ACU200
Base
Moisture/vapour pressure management
3 Base
Uncoupling
4
20
acu 200
1. When cleaning the surface, it is 2. Layout, measurement and cutting the 3. Apply cement adhesive C2 on the old
advisable to use caustic soda for more membrane. surface. Properly secure the membrane
effective cleaning. to the surface, making sure to remove
with the trowel all the air pockets that
can be generated.
4. Align the joints. 5. Connect the sheets with Band DRY50 6. Seal the band with another layer of
13 and adhesive Seal Plus. Seal Plus adhesive (double sealing).
7. Make the connections with the vertical 8. Use DRY80 Cornerin, Cornerout and 9. Tile directly onto membrane, using
facings with Band DRY80 overlapping SUMI 56 in problematic areas. C2 adhesive cement and fit the tiled
with a minimum of 10 cm on the skirting.
ACU200 membrane.
21
ACU200 2 mm 950 g/m2
ACU200 membrane sheet

2
Waterproofing, uncoupling, compensation and ACU200 20 1,5 x 20m (30m ) roll
impact sound reduction for tiling installation
ACU200 10 1,5 x 10m (15m2) roll
with a thin layer of adhesive cement directly
over the floor base with no need for a com- ACU200 5 1,5 x 5m (7,5m2) roll
pression layer in between.


reinforcement

Waterproof band DRY50 Banda 13x30 30m x 12,7cm (1 piece) roll
for joints
DRY50 Banda 13x5 5m x 12,7cm (1 piece) roll
Special adhesive
for joints

Perimeter fastening self-adhesive strip made ACU BAND 48mm x 20m roll
of polyethylene foam to prevent sound filtration
Adhesive tape for joints made of geotextile CINTEX 50 5cm x 50m roll
to facilitate adhesion to cement

22
Swimming Pools
waterproofing
systems
> POOL 120 System
23
Swimming Pools
POOL120
WATERPROOFING SYSTEMS FOR TILED POOLS
Multilayer waterproofing sheet specially designed to ensure 100% water tightness and complete sealing of brand new pools and
reformed pools, with no need to remove the old materials such as tiles, vitreous glass mosaic tiles, etc
Less time and less spending

Our system allows renovation with no mess since our products are fitted directly over the existing finishing itself. Besides, saving
time and over-spending due to the simple installation method, you avoid perforating the receptacle or removing the old tiling to
install a replacement pool.
ENJOY
YOUR POOL
AGAIN
Design
Our POOL120 system easily transforms
your old pool into a new and stylish pool
since our waterproof membrane sheet
is designed for the refurbishment and
redecoration of all types of pools. We
guarantee 100% water tightness and the
perfect sealing of the pool in order to
avoid leaks, pools main problem.
24
Swimming Pools waterproofing systems
POOL120
Pool membranes sheet stick straight together to the old tiles.
Comfort and accessibility

Once the empty pool is clean, and after repairing any defects in the inside, it is time to lay our POOL120 sheet which is fully
adhered to the old tiling with adhesive cement C2. The sheet membranes are specially designed to avoid the formation of
bubbles caused by the steam pressure during the gluing setting process.
POOL120
Our POOL120 membrane sheet is designed to renovate all kind of pools.
Renew your style

With POOL120 is truly and effectively easy to change your old pool into a beautiful and stylish new pool. Look at the pictures and
admire how fashionable they are!
General Problems
Our POOL120 waterproofing system
is 100% guaranteed watertight and the
perfect sealing of the receptacle in order
to prevent and avoid the usual pool
problems, mainly leaking.
25
POOL120
WATERPROOFING SYSTEMS FOR TILED POOLS.
Advantages Advantages
Our system allows renovation with no mess since our products Our system allows reparation of critical areas or particular
are fitted directly over the existing finishing itself. Besides, spots with no need to remove old materials such as tiles,
saving time and over- spending due to its simple installation vitreous glass mosaic tiles, etc
method, you avoid perforating the receptacle or removing the
old tiling to install a replacement pool.
refurbishment
Waterproofing of a pool
1. New tiling
2. Adhesive cement mortar
3. Pool120
4. Dry50 Band
5. Old tiling
26
POOL120
Direct installation over existing floor; it is not necessary to clear out any debris.
1. Clean the pool receptacle and 2. Place the POOL120 sheet fully
repair any defects. adhered to the old tiling with C2
adhesive cement mortar.
Make sure that all the membrane is 3. After the membrane sheets are tightly Due to the thickness of the adhesive, a
perfectly attached to the surface and inserted, the proper union is made with smooth or straight-edged trowel or spa-
there are no air bubbles, no matter how Band DRY50 13, using SEAL PLUS to tula, (not toothed), to ensure a covering
small, in order to avoid future problems adhere it to the membrane sheets. over the entire surface of the joint.
or bulges. Allow the adhesive to dry.
4. Once finished the pool perimeter, 5. When the whole set is dry enough, it is
proceed with the placing of the new time to fill up the pool and enjoy it!
tiling directly over the membrane
sheet using C2 adhesive cement mortar.
27
POOL 120 0,8 mm 415 g/m2
POOL 120 membrane sheet

2
Waterproofing multilayer POOL 120 30 1,5 x 30m (45m ) roll
membrane sheet for
POOL 120 20 1,5 x 20m (30m2) roll
refurbishment of pools.
POOL 120 10 1,5 x 10m (15m2) roll
POOL 120 5 1,5 x 5m (7,5m2) roll
Accessories

Waterproof DRY50 Banda 13x30 30m x 12,7cm (1 piece) roll

reinforcement union strip
Special adhesive
for joints
POOL 120 Features
When joints with REVEStECH ® POOl 120 to different materials such as skimmers, lights, drains of polypropylene and other
elements are required, use an adhesive suitable for them from a supplier of building materials. For a perfect adherence to such
materials, we recommend an adhesive that is two-component, epoxy or polyurethane.
Joints with lights and inlets
Fill with a bead of two part Also use Seal Plus adhesive and put a cut sheet set as close as possible Seal it all with Seal Plus adhesive
polyurethane or epoxy adhesive to the tube. Fit and seal the joints. as shown in the picture.
, to fix the membrane to pvc,
polypropylene, etc.
Sealing around skimmers
Cut the Pool 120 membrane, pasting it and adapting it to the surface. Make joints to plastic with a Seal it all with Seal Plus adhesive
two-part epoxy or polyurethane as shown in the picture.
adhesive. Apply with a spatula.
28
POOL 120 Solving Problems
Losses of level from undetected fissures and cracks
In pools made of reinforced concrete, fissures and cracks are often produced by movements of retraction. To ensure the
impermeability of the pool cover with REVESTECH ® POOl 120 waterproof and flexible membrane, which is able to absorb
movements from shrinkage and settlement.
Losses of level from detected fissures and cracks
In some pools, localised cracks and fissures as well as areas that have “peeled”, can have a partial repair, without having to do the
entire pool. To do this we must remove and sanitise the area peeled off, check that the rest of the surface is sound, then adhere
the REVEStECH® pool120 membrane with a two-part epoxy or polyurethane adhesive.
Modifications to the pool
Replacing or changing the hydraulic perimeter installation
29
30
Indoor
waterproofing
systems
> Bathrooms and wet areas
DRY50 System
In Line
31
Bathrooms and wet areas
DRY 50
WATERPROOFING SYSTEMS FOR NEW OR RENOVATING TILED SHOWERS
Flexible membrane for waterproofed tiled showers, not only for walls and floors but for any other wet or water sensitive areas.
Minimum thickness Simple solution Money saving

Our ultra-thin waterproofing membranes Installation is truly easy. The membrane Our system is economical: you are
permit you to sanitize and restructure sheet is stuck with a thin-set mortar saving both in materials and LABOUR
your old shower decoration as well as under the floor and wall tiles preventing since less time is required
assuring 100% watertightness in every any type of cracking in the future. compared to other methods.
case.
SIMPLY
DESIGN
By definition, good design
has to be functional. Our waterproofing
membrane sheets totally guarantee a
complete sealing of the shower area,
ensuring 100% water tightness. As you
know, some of the most important things
in life are not often visible to the naked
eye...
32
Indoors waterproofing systems
TOTAL IMPERMEABILITY
Generally, waterproof liquid membranes are weak and fragile when suffering a floor movement but our 100% waterproof DRY50
flexible membrane is so elastic and resilient that it will not suffer any kind of cracking. It can be used not only in walls and floors
but in any other wet or water sensitive areas in order to avoid the usual humidity problems that cannot be resolved with traditional
solutions such as rubber paint or waterproof cement. We guarantee total reliable effectiveness in each and every case.
Focus on design
Our DRY50 membranes are prepared to be tiled with any kind of floor and wall
ceramic material that suits your room.
High bond strength to the mortar

The photograph shows in detail the DRY50 membrane sheet fibres veil. These
fibres are essential to guarantee mortar bonding strength to the membrane and,
consequently, total adjustment to the surface.
100% waterproof
Our DRY50 complements reinforce
and helps to fully protect every one
of the critical points in wet areas
such as pipes, corners in/out and
angles. Furthermore, the DRY50
membrane sheet is heat sealed
to the drains during manufacture
securing 100% reliability and
effectiveness.
33
DRY 50
We are versatile; in this way, our kits for waterproofing showers and wet areas allow you to personalize your new
shower and to adapt it to any sort of design, firstly taking into account the type of drainage you wish.
Choose your design Hipped drain One slope drain

REVESTECH Dry50 solutions can be The traditional hipped or four slopes A modern, tiled shower with only one
used in every particular case in drainage allows you to enjoy a classical slope to drain the water in one direction
order to get the perfect shower. Your design along with a renovated look of is the easiest and the more fashionable
choice is about the types of slope and your shower. of choices nowadays. You can select the
drain, that is between a modern linear one you wish from a variety of our high
drain -with just one slope, or the more quality linear drains.
classical square drains -with four slopes.
CUSTOMIsE
YOUR OWN
SPACE
Personal touch
Tiled non step showers let you create a
unique and exclusive space. Choosing
the type of drainage of your preference
is a very personal decision not only
for technical reasons but for your own
practical and aesthetic satisfaction; a new
personal design will give your place a
new appearance according to your taste
and needs.
34
DRY 50
Choosing the type of drainage is a decision that affects both the aesthetical aspects of your shower and the technical ones. In
REVESTECH we always give the best attention to our customers, suggesting solutions and helping them in order to make the
right decision.
Four slopes drain designs

The central drain receives the water through the four slopes which are placed under the tiles.
Hipped drainage gives a more classical touch to your shower design.
One slope drain designs

Linear drains installed in one side of the shower floor drain the water through one slope.
We strongly recommend installing linear drains at the opposite side of the shower entrance which is an easy and practical
installation.
35
DRY50
Our membrane sheet is designed following the regulations and requirements of the new Technical Building Code.
Advantages
Application of DRY50 on site is more simple, secure Our solution solves the common issues that arise during the
and economical. Makes it far easier what until now installation, finishing touches and subsequent behavior of
was a selection dilemma between the different waterproofing working systems.
existing waterproofing systems.
Easier More guarantee Less thickness

DRY50 is the only membrane sheet that Our system offers a 10 year warranty Our product has the same performance
is installed using adhesive cement. when installed following our guidance ability as other materials like PVC, EPDM
instructions. or BITUMINOUS sheets but without
their inconvenient aspects in relation to
the installation process and even more
advantages than liquid waterproofing
products.
Systems that
save time
and money
Shower Coating
1. Coating
2. Tile adhesive mortar
3. Dry50
4. Band Dry50 13
5. In-Out Corner Dry50
6. Dry Tub20
7. Dry Sumi
6 8. Slope formation
9. Framework
It is time to get over usual

problems and complications
such as difficult angles, unsafe
welding, junctions with no
8 guaranteed durability drains and
dubious finishes.
9
36
DRY50 SUMIS
1. Connect the gully to the tub. 2. Slope the mortar bed. 3. Apply the thin-set mortar over using a
4 mm V-notched trowel.
4. Extend the membrane over the 5. Apply pressure to the membrane with 6. Cover the walls with the membrane.
mortar. the flat side of the trowel (held at an Seams can be constructed by overlap-
angle) in smooth, diagonal sweeps. Air ping the edges of the DRY50 by 8 mm
bubbles must be removed. using modified thin-set mortar.
7. Fold the membrane to make the corner. 8. Apply the thin-set mortar over using a 9. Proceed to tile the floor and walls.
Use preformed revestech corners for a 4 mm V-notched trowel.
better finish.
10. Install the anti-odor piece (only in the case that the bathroom does not have a built-in trap) and the grate.
FLAT gully installations universal details FLAT & PREMIER gully installations UK details
1. Apply MS polymer 2. Attach the Univer- 3. If necessary to re- FLAT. Attach the PREMIER_1. Apply MS PREMIER_2. Attach
adhesive at the pipe of sal Adapter Ø50/50F duce, glue the Universal BS Adapter Ø50/Ø56 polymer adhesive at the BS Adapter Ø50/
Sumi FLAT. to the pipe of Sumi Reducer Ø50/40F into to the pipe of Sumi the pipe of Sumi FLAT. Ø56 to the pipe of BS
FLAT. the pipe of Sumi FLAT. FLAT. Pipe Adapter.
37
DRY50 0,52 mm 335 g/m2
DRY50 membrane sheet

2
Waterproof DRY50 30 1,2 x 30m (36m ) roll
membrane sheet 2
DRY50 5 1,2 x 5m (6m ) roll
for shower trays,
walls and floors. DRY50 450 1,5 x 30m (45m2) roll
DRY50 75 1,5 x 5m (7,5m2) roll
Accessories

Waterproof backing DRY Tub20 2 pieces per bag

for pipes
Waterproof band DRY50 Banda 13 x 30 30 m x 12,7 cm (1 piece) roll

for joints
DRY50 Banda 13 x 5 5 m x 12,7 cm (1 piece) roll
DRY50 Banda 30 x 30 30 m x 30 cm (1 piece) roll
DRY50 Banda 30 x 5 5 m x 30 cm (1 piece) roll
38
Types of drain
PREMIER-DRY50 DRAINS FLAT-DRY50 DRAINS

FOR BRAND-NEW WORKS OR FOR Refurbishment
Refurbishment WORKS WORKS
Siphoned drain for built-in showers convertible in Extremely flat drain for refurbishment works with our
no siphoned drain. Incorporates 50mm. or 40mm. REVESTECH systems.
vertical-horizontal outlets and stainless steel grilles
Depending on installation conditions
and trims AISI 304.
its height reaches a minimum of 42 mm and a maximum of
Manufactured according to EN-274 and IN-1329.1 regulations, 62 mm. With siphoned drain for continuous use facilities which
thereby not only ensuring a top quality product but the perfect becomes non-siphoned drain if necessary.
water drainage, enough, regular and continuous quantity of
water, plus the hydraulic seal required by CTE for brand new
works.
6 5
4
4
2 1 2
1
3 3
7 6
5
8
1. Waterproofing membrane sheet. 1. Waterproofing membrane sheet.

2. Sealing area that ensures the sealing 2. Sealing area that ensures the sealing
in the most critical point. in the most critical point.
3. Draining cubicle. 3. Draining cubicle.
4. 5 cm Siphon. 4. 4 cm Siphon.
5. Vertical / horizontal outlet cap. 5. Clamping ring grate.
6. Clamping ring grate. 6. BS Adapter Ø50/Ø56 (only for UK)
7. BS Pipe Adapter (only for UK). or Universal Adapter Ø50/50F
8. BS Adapter Ø50/Ø56 (only for UK) plus Universal Reducer Ø50/40F.
or Universal Reducer Ø50/40F.
Water flowing without obstacles

All our drainage kits are manufactured in a singular way in
order to facilitate that humidity and/or any water leaking in
the substrate joints was able to reach the gully without any
difficulty to exit normally through the evacuation. We do not
incorporate any kind of rubber gasket or ring to prevent all
types of bacteria, mould and mildew.
39
Measures
PREMIER-DRY50 DRAINS • FOR BRAND-NEW WORKS OR Refurbishment WORKS
BS PIPE BS ADAPTER
ADAPTER Ø50/Ø56
(ONLY FOR UK) (ONLY FOR UK)
Ø1
50 m
m
UNIVERSAL
REDUCER
Ø50/40F
BS ADAPTER
Ø50/Ø56
78 mm
(ONLY FOR UK)
m
,5 m
95
Ø
FLAT-DRY50 DRAINS • FOR Refurbishment WORKS
BS ADAPTER
Ø50/Ø56
(ONLY FOR UK)
Do not
turn top
Sealed valve
148,5 m
m m
148,5 m
UNIVERSAL
UNIVERSAL ADAPTER
REDUCER Ø50/50F BS ADAPTER
Ø50/40F Ø50/Ø56
(ONLY FOR UK)
65 mm
192,2 m 118 mm
m
40
DRY50 SUMIS Kits for waterproofing showers with hipped drainage system.
sumiLUXE-DRY50
Reference Presentation (Sheet size)
DRY50 Sumiluxe 025 UK 1 piece box (0,5x0,5m)

DRY50 Sumiluxe 240D* UK 1 piece box (1,2x2m)
Height: 82mm.
DRY50 Sumiluxe 300D* UK 1 piece box (1,5x2m)
Outputs:
horizontal and DRY50 Sumiluxe 375D* UK 1 piece box (1,5x2,5m)
Description vertical Ø 40/56 H.
Kit consisting in siphoned drain with 11 cm clapping grate which is sealed to our waterproof membrane sheet in order to ensure the most critical point.
sumiFLATLUXE-DRY50
DRY50 Sumiflatluxe 025 UK 1 piece box (0,5x0,5m)

DRY50 Sumiflatluxe 240D* UK 1 piece box (1,2x2m)
Height: 62/42mm.
DRY50 Sumiflatluxe 300D* UK 1 piece box (1,5x2m)
Outputs: horizontal
Ø 40/56 H. DRY50 Sumiflatluxe 375D* UK 1 piece box (1,5x2,5m)
Description
sumiCIRCULAR-DRY50
DRY50 Sumicircular 025 UK 1 piece box (0,5x0,5m)

DRY50 Sumicircular 240D* UK 1 piece box (1,2x2m)
Height: 82mm.
DRY50 Sumicircular 300D* UK 1 piece box (1,5x2m)
Outputs:
horizontal and DRY50 Sumicircular 375D* UK 1 piece box (1,5x2,5m)
Description vertical Ø 40/56 H.
New version offset D
* The Gully 240D, 300D et 375D is sealed to the A two sizes: 1,2 m / 1,5 m
A
waterproofing membrane to make the work easier. 40 cm

In all sizes, centred on the narrowest part (A) and offset B two sizes: 2 m / 2,5 m
40 cm on the longer side (B).
41
DRY50
Kits for waterproofing showers with one slope drain system. With perforated or smooth lacquered grids to taste, or tileable to
match or contrast with floor tiles.
Elegance
and quality
at your feet
Design
Choosing one of our shower drain
covers is as easy as installing it. Give a
personal touch to your new bathroom
choosing between linear drain grates,
smooth or perforated electroplated steel,
lacquered in colour or even linear overlay
grids.
42
Example of white lacquered in wedge and crate.
Electro-polished stainless The colour of your preference

Our new linear drains are electro- In Revestech we appreciate the
polished stainless steel finished which importance between harmony and
ensures their durability, safety design and consequently we offer our
and hygiene. customers the possibility of choosing
any colour for the lacquered in wedges
and crates. Ask our commercial
department for the minimum order.
Tileable linear shower drain

Blind troughs drain the water out through
the slots on the side leaving the sump
completely concealed in the tiling.
43
DRY50 LINEAR
LINEAR PREMIER-DRY50 Linear Premier DRY50
Reference Presentation (Sheet)
Cuadros Chrome DRY50 Lineal Premier 60 UK 1 piece box (1,2x2m)

DRY50 Lineal Premier 70 UK 1 piece box (1,5x2m)
Acero Laberinto
Waves Lines
Description Height Outputs

Siphoned drain with built-in grate and waterproofing 82mm. Horizontal
membrane sheet. and vertical Ø 40/56 H.
LINEAR FLAT-DRY50 Linear Flat DRY50

Cuadros Chrome DRY50 Lineal Flat 60 UK 1 piece box (1,2x2m)

DRY50 Lineal Flat 70 UK 1 piece box (1,5x2m)
Acero Laberinto DRY50 Lineal Flat 90 UK 1 piece box (1,5x2m)
Waves Lines
Description Height Outputs

Siphoned drain with built-in grate and waterproofing 62/42mm. Horizontal
membrane sheet. Ø 40/56 H.
LINEAr GRATE DRY50 Linear Grate DRY50

Cuadros Chrome
Rejilla 60 Lineal 1 piece box
Acero Laberinto
Waves Lines
A/
B
Measures
93
mm
R
1 42 mm
2 42 mm
42 mm
93 mm
93 mm
1. Grids 2. Troughs
Length R Length C
60 591 mm 60 596 mm
Grids Smooth A Grids Perforated B
70 695 mm 70 700 mm
Height and Width 88±0,5 mm Height and Width 88±0,5 mm
80 795 mm 80 800 mm
11 mm 11 mm
90 895 mm 90 900 mm
100 995 mm 100 1000 mm
120 1195 mm 120 1200 mm
44
DRY50 LINEAR TILEABLE

LINEAr PREMIER-DRY50 tileable Linear Premier DRY50 Tileable
DRY50 Lineal Premier 60 Revestible UK 1 piece box (1,2x2m)
Description Height Outputs Includes:

Linear tileable, siphoned drainpipe which is sealed to our water- 82mm. Horizontal Self-adhesive geotextile to place on the
and vertical top of the grid, for the best grip of the
proof membrane sheet in order to ensure the most critical point. lining.
Ø 40/56 H.
LINEAr FLAT-DRY50 TILEABLE Linear Flat DRY50 Tileable

DRY50 Lineal Flat 60 Revestible UK 1 piece box (1,2x2m)
Description Height Outputs Includes:

Linear tileable, siphoned drainpipe FLAT which is sealed to our 62/42mm. Horizontal Self-adhesive geotextile to place on the
Ø 40/56 H. top of the grid, for the best grip of the
waterproof membrane sheet in order to ensure the most critical lining.
point.
Measures
88
mm
93
mm
R
1 42 mm
2 New minimal height grids-tileable

To help the grid fit flush with the surrounding
3 base of the shower, we reduced the height
C
by 6 mm, from 11 mm to 5 mm.
Tiling
5 mm
1. Grids 2. Troughs
1
Length R Length C
60 591 mm 60 596 mm
3 6 mm
70 695 mm 70 700 mm
80 795 mm 80 800 mm
90 895 mm 90 900 mm
100 995 mm 100 1000 mm 11 mm
120 1195 mm 120 1200 mm Tiling 2
45
DRY50 LINEAR NOVO
LINEAR NOVO DRY50 UK Linear Novo DRY50 UK
Cuadros DRY50 Lineal Novo 60 UK 1 piece box (1,2x2m)
DRY50 Lineal Novo 70 UK 1 piece box (1,5x2m)
Acero DRY50 Lineal Novo 90 UK 1 piece box (1,5x2m)
Waves
Height Outputs *BS ADAPTER Ø50/Ø56 (ONLY FOR UK)

60 mm. Horizontal Ø 50 mm
Description
Siphoned gully with 60x5.5 cm lineal clapping grate and DRY50 waterproof membrane matting heat-sealed to the gully.
LINEAR NOVO vertical DRY50 UK Linear Novo Vertical DRY50 UK

Cuadros DRY50 Lineal Novo Vertical 60 UK 1 piece box (1,2x2m)
DRY50 Lineal Novo Vertical 70 UK 1 piece box (1,5x2m)
Acero DRY50 Lineal Novo Vertical 90 UK 1 piece box (1,5x2m)
Waves
Height Outputs * BS ADAPTER Ø50/Ø56 (ONLY FOR UK)

94 mm. Vertical Ø 50 mm
Description
Not siphonic drain with 60x5.5 cm lineal clapping grate and DRY50 waterproof membrane matting heat-sealed to the gully.
A/
B
64
R mm
1 45 mm
Measures
2
42 mm
42 mm
1. Grids
Length R C
60 591 mm 93 mm
93 mm
70 695 mm
90 895 mm
2. Troughs Grids Smooth A Grids Perforated B

Height and Width 48 mm Height and Width 57 mm
Length C
11 mm 11 mm
60 596 mm
70 700 mm
90 900 mm
46
DRY50 LINEAR
1. Connect the gully to the tub. 2. Slope the mortar bed. 3. Apply the thin-set mortar over using a
4 mm V-notched trowel.
4. Extend the membrane over the mortar. 5. Apply pressure to the membrane with the flat 6. Cover the walls with the membrane. Seams
side of the trowel (held at an angle) in smooth, can be constructed by overlapping the edges
diagonal sweeps. Air bubbles must be removed. of the DRY50 by 8 mm using modified thin-
set mortar.
7. Fold the membrane to make the corner. Use 8. Apply the thin-set mortar over using a 4 9. Proceed to tile the floor and walls.
preformed revestech corners for a better finish. mm V-notched trowel.
10. Install the anti-odor piece (only in the case that the bathroom does not have a built-in trap) and the grate.
Specific case: Tiled linear drain
Shower floor (the tile heigth)
1. Insert the linear drain 2. Bond the tile over the grate. Use a suitable 3. Before tiling the floor, tile and install the grate 4. Proceed to tile the floor and walls, starting
channel inside the drain adhesive for this. because the height of the complete shower from the tiled grate.
body and adhere the floor -the tiles height- must be taken from the
membrane with a thin-set height of the tiled grate. Tile the grate: cut a
latex modified mortar. piece of tile at the size of the grate and adhere
the piece over the grate then, insert the tiled
grate over the linear drain channel.
47
48
Specials
solutions
> Grass installation
Root
> Uncoupling / Waterproofing

Ditec3
49
Grass installation
ROOT
Solution for base draining of the installation of artificial turf
Pervious base for the installation of artificial turf. geo-draining

dimensional membrane, consisting of two geotextiles
and a core of filament whose distribution mimics the shape
of the roots. Installed between the lawn and waterproofing or System
inspired
pavement, configures a spring base of passive drainage that
ensures the proper output of water from the irrigation, rain or
snow, thus avoiding the formation of puddles and the drag of
the load of materials.
The system is complemented by our GARDEN TAPE AND

by nature
JOINT, which forms a union for the installation of artificial turf
in either a decorative or sports version.
1 1
3 3
4 2 4 2
5 5
6 6
Installation of artificial turf Installation of artificial turf

In roofs and terraces sports surfaces
1. Lawn 1. Lawn
2. Banding joints GARDEN TAPE or JOINT. 2. Banding joints GARDEN TAPE or JOINT.
3. Adhesive 3. Adhesive
4. Three-dimensional geosynthetics ROOT 4. Three-dimensional geosynthetics ROOT
5. Waterproof membrane DRY80 5. Polyethylene film. Separator
6. Base 6. Base
why choose ROOT?

_Because it is a more flexible material _Because it promotes optimal hygienic conditions
_Because it has great drainage capacity _Because it avoids the problems of asphalt: e.g.
_Because it has high resistance to fatigue 1. High cost: labour, transportation, padding, and time.
from compression 2. Little drainage capacity.
_Because the installation is refreshed _Because you can recycle the water
50
Special Solutions
ROOT 6,5 mm 660 g/m2
ROOT Geomembrane
Draining geomembrane ROOT 266 3,8 m x 70 m roll

ROOT 133 1,9 m x 70 m roll
ROOT 19 1,9 m x 10 m roll
Optimal union for Garden Tape 30 cm x 100 m roll

decorative artificial grass
Optimal union for artificial Joint 30 cm x 100 m roll

turf for sports use
Joint-S double-sided 30 cm x 100 m roll
Perfect drainage.
ng Wa
The water that passes through the li te
cyc rr
artificial turf, is filtered by the geotextile, ec
re yc
and failing to find a vertical outlet, er lin
at Root artificial grass g
W
flows in the interior of the geosynthetic
pervious three-dimensional ROOT until
it reaches the side channels, where it
is pumped back to the main line to be
subsequently evacuated.
ENSURES THE CORRECT EXIT OF THE WATER

PREVENTS THE FORMATION OF PUDDLES
AVOIDS THE DRAG OF ATTACHED MATERIALS
Water compilation
Natural tread effect.

ROOT reduces the impact that joints suffer from the hardness of the bases of
asphalt. Due to its flexibility and distribution, it mimics the effect of a tread on
natural grass.
Technical data
· It consists of a three-dimensional geosynthetics that
configures an elastic base of passive drainage, durable and
strong for preparation and ground protection.
· Composed of Virgin polypropylene resistant to various

environmental factors.
More quality
More natural
· Formed by two geotextiles and a core of filaments which
mimics the form of roots.
Maximum
Cushioning · It reduces fatigue and overexertion suffering joints by
excessive hardness of artificial turf.
51
Uncoupling / Waterproofing
Ditec 3
UNCOUPLING SYSTEMS
Polyethylene nodular matting incorporating polypropylene geotextiles on both sides which are glue-free bonded. It is perfect for the
uncoupling of a wide variety of flooring materials.
Unique insulation Secure fixing Quick installation

The nodular matting sandwiched This advanced lamination technology Newly designed to absorb tile adhesive
between the geotextiles serves as ensures a more secure and durable quickly with the intention of filling up the
unique insulating layer under the finished anchoring of the finished floor over empty nodular gaps, our product permits
floor cover. Its dimpled structure acts the substrate below. The exclusively substantially faster installation of the
as resistant matting against substrate enhanced properties of our product finished flooring above.
cracking, preventing unsightly crack make it unbeatable whether used in
propagation to the flooring installed standard applications or with underfloor
above. heating systems.
TOTALLY
PROTECTED
TILING
No stress problems
Revestech DITEC3 is a new product to
resolve stress relief in tiling installation
and the subsequent problems related
to it. It provides a better and improved
distribution and relief of the compressive
stress acting on different and specific
points on the floor.
52
Special Solutions
DITEC 3
UNCOUPLING SYSTEMS
1. Substrate
2. High-quality flexible adhesive
3. Ditec 3 NO OK
4. High-quality flexible adhesive
5. Tiles
Lay the modular side of the

matting downwards.
Perfect uncoupling Also for outside

Our double-based decoupling system DITEC 3 permits outdoors uncoupling
DITEC 3 offers great advantages to work tiling such as covers and terraces. In
with as it has powerful capacities for the case it was necessary to previously
perfect uncoupling between the support waterproof the area, the union joints
and the tiling. The geotextiles uncoupled between the matting and the perimeter
the tiles from the substrate and protect must be sealed using DRY80 Band
them from any cracking and movements 20 together with the cement-based
of the substrate. Air channels between adhesive in watertight and elastic acrylic
nodules allow the substrate ventilation dispersion (A+B).
and prevent water vapour accumulation.
53
Ditec 3
UNCOUPLING SYSTEMS
Polyethylene nodular matting incorporating polypropylene geotextiles on both sides which are glue-free bonded. It is perfect for
the uncoupling of a wide variety of flooring materials.
Flooring Flooring
Ditec 3 Ditec 3
1 2
Deformations Moisture sensitive baseline
Base Base
Uncoupling Waterproofing
DITEC3 uncouples the substrate cover and neutralizes stress DITEC 3 It is an impermeable polyethylene foil with a relatively
forces taking place between the substrate and the tiling due high density of vapour diffusion of water. Properly positioned
to their different movements. The matting also levels out in the union between sheets, as well as in the areas of delivery
the cracks or delaminating in the substrate, preventing the of walls or other structures with vertical soil, acts as sheet
transmission to the tiled cover. waterproofing. DITEC 3 protects against moisture or filtration
of substances that may damage it.

it.
Flooring Flooring
Ditec 3 Ditec 3
3 4
Remaining moisture in the baseline Straight to the baseline
Base Base
Moisture/vapor pressure compensation Load/support distribution

The opened air channels situated on the lower side of the DITEC3 transfers to the substrate the loads affecting the tile
matting compensate the water vapour pressure in case of covering as a result of the transit through the circled gaps in
moisture or humidity in the substrate. the superior side of the matting which are filled with a thin
layer of cement-based adhesive. This improves the resistance
of the tiles placed above DITEC3. In areas with larger amount
of transit (such as industries), tiles must be resistant and stable
enough.
54
Special Solutions
DITEC 3 3 mm 550 g/m2
DITEC 3 membrane sheet

Polyethylene nodular Ditec 3 Rolls of 1 m x 30 m (30m )
2
matting incorporating 1 pallet=8 rolls

polypropylene
geotextiles on both sides
which are glue-free
bonded

Accessories


reinforcement

Waterproof band DRY50 Banda 13x30 30m x 12,7cm (1 piece) roll
for joints
Roofing ventilation
Chimenea 1 piece box
chimney
DRY80 Sumi siphoned

drain protection
attachment
55
REVESTECH WEBSITE
FOR MORE UP-TO-DATE NEWS AND TECHNICAL INFORMATION
Revestech Web
We invite you to visit our website
www.revestech.com to get additional
information and discover our range
of products and applications.
News
If you wish up-to-date
company news as well as
new projects, works or products
installation you will find more
information on the news section of
our webpage. Also you will find us on
Twitter @Revestech.
DRY 50
FICHA TÉCNICA Y GUÍA DE INSTALACIÓN
Technical Data sheets

Newsletter DRY 50
FICHA TÉCNICA Y GUÍA DE INSTALACIÓN
and Installation Guides
If you want to keep Log into our website so
track about our new you will find Installation
products as well as Guides of all our products
REVESTECH news, along with their Technical
please subscribe to our Data Sheets in order to
Newsletter in improve and increase the
www.revestech.com Asistencia Técnica: information you need.
+34 965 106 569 Asistencia Técnica:
[email protected]
965 106 569

www.revestech.fr
[email protected]
www.revestech.fr
REVESTECH TRAINING
GOOD PROFFESIONALS NEVER STOP LEARNING AND TRAINING
Free Course: REV

ar
Gu an
te
TRAESTEC
e
ININ H
CERTIFIED REVESTECH SYSTEMS INSTALLER G
ee
Gu t
aran
DRY50: Presentation of the system. Products. Installation steps of Sumi, Sumi-flat and gutters
DRY80: Presentation of the system. Terraces and covers. Products. Installation steps.
POOL 120: Presentation of the system. Products. Installation steps.
ACU200, ROOT: Presentation of the systems. Products and installation steps.
REVESTECH invites you to attend our free training courses. Do not miss the opportunity to expand your professional
knowledge. Become a better professional learning the theory and practice of the different applications that provide our
waterproofing and insulation systems.
Check the topics agenda, date and place for next editions on our website www.revestech.com
Fill up the application and reserve now a place on the course of your convenience. We are waiting for you.
You can also get a diploma to become a Certified REVESTECH Installer and join our Revestech Easy installers
network.
56
Facilities that have used REVESTECH ® Dry systems following the
instructions of installation and technical guides of Revestech high
technology geo-membranes meet the requirements of the new
Technical Building Code DB HS1.
For more information and / or to download documents such as certificates,
installation guides, technical data sheets... visit our website
www.revestech.com
Disclaimer
Specifications, dimensions and technical
characteristics of the products can be subjected
to change without notice, always looking for
improvements or adaptations to new standards.
Revestech reserves the right to remove any product
from our range we consider should not continue in
our catalogue for whatever reason.
Please note the images shown in this catalogue

are for illustrative purposes only. Actual installations
should always follow the installation instructions,
copies of which are available from Revestech, upon
request.
Garan
REVESTECH WARRANTY
REVESTECH ® Dry membrane sheets are
ti
años
a
years
guaranteed for 10 years from invoice date.
ee
Gu t
aran
For more details please contact our REVESTECH
commercial department.
REVESTECH can help specify our products

for all our customers.
REVESTECH works closely with major architecture
databases (Arquimedes and Presto), Cype Engineers
and Acae.
These databases allow to export work units with

multiple information in different formats such as
FIEBDC-3, Excel, Pdf, Txt, etc. in order to incorporate
them to new construction or refurbishment projects,
turning them in quickly accessible tools and effective
design guidelines for the professional so they can
specify the best solution for any given situation.
www.generadordeprecios.com www.acae.es
Walk on roofs Balconies Pitched
/ terraces / sills Roofing
/ inner courtyards
Non-walk INDOOR AND OUTDOOR Swimming

ON ROOFS MULTIFUNCTION SYSTEM Pools
Bathrooms Artificial synthetic Uncoupling

and wet areas grass installation
NIETOS DE MIGUEL C/ La Rioja, 4 T. (+34) 965 106 569

MARTINEZ RAMIREZ,
. S.L 03006 Alicante. Spain F. (+34) 965 109 285
www.revestech.com

Construction Systems: With Unlimited Design

Uploaded by

Copyright:

Available Formats

Construction Systems: With Unlimited Design

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Construction Systems: With Unlimited Design

Uploaded by

Copyright:

Available Formats

CONSTRUCTION

Walk on roofs and terraces

Balconies, sills and inner courtyards

Non-walk on roofs / Walk on roofs with elevated flooring

Multifunction System for walkable roofs

2. Swimming Pools waterproofing systems 23

3. Indoors waterproofing systems 30

Bathrooms and wet areas

Our original systems allow us to re-think and

Our products are characterized by their

If you need additional technical or professional information, check on

> Balconies, sills and inner courtyards

> Pitched Roofing

> Non-walk on roofs / Walk on roofs

> Indoor and outdoor

Easy solution No need to dig out Thin set method

Flexible and elastic

More versatile solutions

Avoid any kind of problems

No waiting time Faster

1º Between the layers. 2º Over each joint.

DRY80 membrane sheet

Waterproof DRY80 Cornerin 2 pieces per bag

Description Reference Presentation

Waterproof DRY80 Banda 50 0,48 x 30m roll

Description Reference Presentation

Coverage: 1 kg = 9 linear metres overlap.

Description Reference Presentation

Out Ø 32-40 h DRY80 Sumi56 100 1 piece box.

Description Reference Presentation

Description Reference Presentation

DRY80 Sumi siphoned

Description Reference Presentation

Meeting of vertical and horizontal membranes

Finishing the corners

Finishing around the drain

Waterproofing systems for balconies, sills and inner courtyards.

DRY40 P 0,42 mm 245 g/m2

DRY50 0,52 mm 335 g/m2

Breathable Greater savings

Description Reference Presentation

Breathable waterproof AIR 135 1,5 m x 50 m roll

Easy solution No need to dig out Incredibly fast

More versatile solutions.

ALUDRY Membrane sheet

Self-adhesive ALU BANDA 10 10 cm x 10 m band

Description Reference Presentation

Description Reference Presentation

Out Ø 32-40 h DRY80 Sumi56 100 1 piece box.

Description Reference Presentation

Description Reference Presentation

DRY80 Sumi siphoned

Description Reference Presentation

Ideal for installation on trafficable elevated flooring

Vapour barrier Crack isolation

ACU200 membrane sheet

Description Reference Presentation

Waterproof DRY80 Cornerin 2 pieces per bag

Description Reference Presentation