Scribd
Upload
154 views5 pages

1.1.01 Identify The Proper Location and Setup Electrical Connections To Computer System

The document provides procedures for safely fighting electrical fires. It outlines raising an alarm, evacuating if not involved in firefighting, and following instructions as a member of the firefighting team. As a leader, key steps include locating a CO2 fire extinguisher, calling for assistance and the fire brigade, clearing emergency exits, and attempting to evacuate after judging the fire's magnitude. Proper firefighting methods and reporting measures taken are emphasized.

Uploaded by

fcmitc
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
154 views5 pages

1.1.01 Identify The Proper Location and Setup Electrical Connections To Computer System

The document provides procedures for safely fighting electrical fires. It outlines raising an alarm, evacuating if not involved in firefighting, and following instructions as a member of the firefighting team. As a leader, key steps include locating a CO2 fire extinguisher, calling for assistance and the fire brigade, clearing emergency exits, and attempting to evacuate after judging the fire's magnitude. Proper firefighting methods and reporting measures taken are emphasized.

Uploaded by

fcmitc
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

FR.

CUTHBERT MEMORIAL ITI

1.1.01 Identify the proper location and setup electrical connections to


computer system
Objectives:

At the end of this exercise, you shall be able to

• identify the proper location

• connect electrical components of a computer.

PROCEDURE

TASK 1: Identify the proper location

1 Identify the proper location and draw layout diagram of computer system and peripherals.

Note: write component type and connector like. CPU-power chord.

TASK 2: Identify electrical components of a computer

1 Observe the devices connected to computer system and prepare the connection items chart.

Note: Write devices type and connectors like, printer power chord, USB cable.

ANCHAL
FR.CUTHBERT MEMORIAL ITI

1.1.02 Safety symbols and Hazard detection


Objectives:

At the end of this exercise you shall be able to

• identify the four basic categories of safety signs

• record the meanings of the safety signs

• read and interpret the different types of personal protective devices from the chart.

PROCEDURE
TASK 1: Identify the four basic catagories of safety sign Instructor may provide various safety signs
chart small categories and explain their categories and their meaning, description

1 Identify the safety sign from the chart.

2 Record the name of the category in table1.

3 Mention the meaning description of the safety sign in table1.

4 Get it checked by your instructor.

Table 1

Fig no Basic Category Meaning


1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20

TASK 2: Record the meanings of the safety sign

Job Sequence

ANCHAL
FR.CUTHBERT MEMORIAL ITI

1 Read and interpret the personal protection equipment by visually on real devices or from the
charts.

2 Identify and select the personal protection equipment used for suitable type of protection.

3 Write the name of the PPE to the corresponding type of protection in table2.

4 Get it checked by your instructor

TASK 3:Read and interpret the different types of personal protective devices from the chart.

1 Identify the occupational hazard to the corresponding situation with a potential harm given in table3.

S.No. Source of potential harm Type of occupational hazards


1
2
3
4
5
6
7
8

ANCHAL
FR.CUTHBERT MEMORIAL ITI

1.1.03 Practice safe methods of fire fighting in case of electrical fire


Objectives:

At the end of this exercise you shall be able to

• demonstrate the ability of fire-fighting during electrical fire

• as a member of the fire-fighting team

• as a leader of the group.

PROCEDURE

Requirements Equipment/Machines • Fire extinguishers- CO2 - 1 No.

General procedure to be adopted during electrical fire

1 Raise an alarm. Follow the methods giving below to raise an alarm signals when the fire breaks out.

✓ Raise your voice and shout Fire! Fire! to draw attention.


✓ run towards fire alarm/bell to activate
✓ switch off the mains (if possible)

2 when you hear the alarm signal:

✓ stop working
✓ turn off all machinery and power
✓ switch off fans/air circulators/exhaust fans. (it's good to switch off the sub-main)

3 If you are not involved in the fire fighting:

✓ leave the place using the emergency exit.


✓ evacuate the premises
✓ assemble at a safe place along with others
✓ check, if anyone has called the fire services
✓ close the doors and windows, but do not lock or bolt.

As a member of the fire-fighting team

4 If you are involved in firefighting:

✓ take instructions to extinguish fire in an organised way. If taking instructions:


✓ follow the instructions, and obey. Be safe and do not get trapped.
✓ do not use your own ideas.

As a leader of the group If you are giving instructions:

✓ locate and use co2 fire extinguisher


✓ seek for sufficient assistance and inform the fire brigade
✓ locate locally available suitable means to put out the fire
✓ judge the magnitude of the fire, Ensure that emergency exit paths are clear with no
obstructions and then attempt to evacuate the place. (Remove explosive materials,
substances that would easily catch fire. – Put off the fire with assistance identifying people
with assigned responsibility for each activity.

ANCHAL
FR.CUTHBERT MEMORIAL ITI

5 Report the measures taken to put out the fire, to the authorities concerned.

ANCHAL

You might also like