Scribd
Upload
148 views

Project: 60 Tessebhosn Road Location: 3rd Storey Aluminum Canopy Design Element: 75x40x5t C-Channel

Uploaded by

ChangHangWing
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
148 views

Project: 60 Tessebhosn Road Location: 3rd Storey Aluminum Canopy Design Element: 75x40x5t C-Channel

Uploaded by

ChangHangWing
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Project: 60 Tessebhosn Road

Location: 3rd Storey Aluminum Canopy


Design Element: 75x40x5t C-Channel

Figure:

Material Properties:
Steel Grade = S275
Proof Strength, fy = 275 N/mm²
Ultimate Strength, fu = 430 N/mm²
Modulus of Elasticity, E = 210000 N/mm²
Poisson's Ratio, ν = 0.3
Steel Density, γ = 78 N/mm³

Member Sizing:
Section Depth, D = 75 mm d= 65 mm
Section Width, B = 40 mm b= 35 mm
Flange Thickness, tf = 5 mm
Web Thickness, tw = 5 mm
Cross Section Area, A = 725 mm² [2 x (B x tf) + (D - 2 x tf) x tw]
Elastic Section Modulus, Wel.xx,yy = 16140 mm³ [BD²/6 - bd³/6D]
Second Moment of Area, Ixx,yy = 538260 mm⁴ [tw d³/12 + 2[B tf³/12 + tf B(tf+d²)/4]]
ɛ= 0.924 [(235/fy)^0.5]
Ratio of d/t = 7.00 < 8.3 Class 1
Section Classification = Class 1 [Use Wpl]
Shear Area, Avy = 461 mm² [2 x A/π]
Plastic Shear Resistance, Vel.y.Rd = 73 kN
Plastic Moment Resistance, Mel.y.Rd = 4.4 kN.m
Design Loading:
Design Load Width, Wload = 1.50 m
Design Span, L = 2.13 m
Dead Load:
Selfweight, w = 0.057 kN/m
Alum.Panels = 0.350 kN/m²
Factored DL = 0.785 kN/m [DL*1.35]

Live Load:
Alum.Panels = 0.500 kN/m²
Factored LL = 1.125 kN/m [LL*1.5]

Total Design UDL = 1.910 kN/m

Design Bending Moment, MEd = 4.333 kN.m < Mel =4.44 kN.m OK!!!
Design Shear Force, VEd = 4.068 kN < Vpl =73.28 kN OK!!!
75x40x5t C-Channel is adequate!!

Deflection:

Actual Deflection, δactual = 17.07 mm


Allowable Deflection, δallow = 11.83 mm Deflection Fail!!

You might also like