Cat Yoke g100

Download as pdf or txt
Download as pdf or txt
You are on page 1of 20

100

GRAB CHAIN SLING

No. 8-2018.1 EXTREME100 GRAB CHAIN SLING


100
GRAB CHAIN SLING

100
GRAB CHAIN SLING

Copyright © 2018
WARNING 2
YOKE Industrial Corp.
All Rights Reserved.
NEVER EXCEED PUBLISHED WORKING LOAD LIMIT
100
GRAB CHAIN SLING

Copyright © 2018
YOKE Industrial Corp.
All Rights Reserved. 3 WARNING
NEVER EXCEED PUBLISHED WORKING LOAD LIMIT
100
GRAB CHAIN SLING

DANGER: Overhead lifting presents a very real danger of severe injury or loss
of life if lifting equipment is not used properly.Please read and understand all of
these instructions prior to using any lifting sling or sling assembly. Sling should
only be used by qualified persons who are responsible for the sling selection,
inspection and use.

Grade 100 Chain Sling Components


WORKING LOAD LIMITS IN TONNES Acc. to PAS 1061

Load Factor 1 1.4 1 2.1 1.5 1.6


For Chain β 0 - 45° 45° - 60° β 0 - 45° 45° - 60°
tonnes
Size mm α 0 - 90° 90° - 120° α 0 - 90° 90° - 120°
6 1.4 2.0 1.4 2.9 2.1 2.2
7 1.9 2.7 1.9 4.0 2.9 3.0
8 2.5 3.5 2.5 5.3 3.8 4.0
10 4.0 5.6 4.0 8.4 6.0 6.4
13 6.7 9.4 6.7 14.1 10.1 10.7
16 10.0 14.0 10.0 21.0 15.0 16.0
20 16.0 22.4 16.0 33.6 24.0 25.6
22 19.0 26.5 19.0 39.9 28.5 30.4
26 26.5 37.1 26.5 55.7 39.8 42.4
32 40.0 56.0 40.0 84.0 60.0 64.0

WORKING LOAD LIMITS IN LBS Acc. to PAS 1061

Load Factor 1 1.4 1 2.1 1.5 1.6


For Chain Size β 0 - 45° 45° - 60° β 0 - 45° 45° - 60°
lbs
mm inch α 0 - 90° 90° - 120° α 0 - 90° 90° - 120°
6 7/32 3,200 4,500 3,200 6,800 4,800 5,100
7 1/4 (9/32) 4,300 6,100 4,300 9,100 6,400 6,900
8 5/16 5,700 8,100 5,700 12,100 8,500 9,100
10 3/8 8,800 12,400 8,800 18,700 13,200 14,100
13 1/2 15,000 21,200 15,000 31,800 22,500 24,000
16 5/8 22,600 32,000 22,600 47,900 33,900 36,200
20 3/4 35,300 49,900 35,300 74,900 52,950 56,500
22 7/8 42,700 60,400 42,700 90,600 64,000 68,300
26 1 59,700 84,400 59,700 12,600 89,550 95,500
32 1 1/4 90,400 127,800 90,400 191,700 135,600 144,600

** Safety factor 4:1 above limits are valid for standard use and equally loaded slings.
Proper use and maintaince of your YOKE chain slings will give long life and enable you to
carry out your lifting operations efficiently and safely.
The Alpha(α) angle should never exceed 120°; The Beta(β) angle should never exceed 60°

Copyright © 2018
WARNING 4
YOKE Industrial Corp.
All Rights Reserved.
NEVER EXCEED PUBLISHED WORKING LOAD LIMIT
100
GRAB CHAIN SLING

α
<3 l 3l

EXTREME100 GRAB CHAIN SLING Features


YOKE offers best solutions which can adjust the length of Chain Sling serving for
unsymmetric lengths with convenience and functionality, also with following features.

● Light weight but heavy duty system, extreme wear resistance and longer life than traditional
components.
● Cost effective compared to conventional slings using multiple components.
● Product designed according to EN1677 and PAS 1061, tested according to GS-OA-15-05.
● Each component is Proof Load tested at 2.5 times the WLL with certification for each sling.
● Each component is Fatigue Rated to 20,000 cycles at 1.5 times the WLL.
● Each component is marked with batch number that links to the test certificate with full traceability to
raw material.
● Fully integrated shortening clutch and master link.
● No reduction in WLL when shortening chain.
● Replacement parts available worldwide.

Copyright © 2018
YOKE Industrial Corp.
All Rights Reserved. 5 WARNING
NEVER EXCEED PUBLISHED WORKING LOAD LIMIT
100
GRAB CHAIN SLING

Copyright © 2018
WARNING 6
YOKE Industrial Corp.
All Rights Reserved.
NEVER EXCEED PUBLISHED WORKING LOAD LIMIT
100
GRAB CHAIN SLING

••Quenched and Tempered Alloy Steel.


B ••At least 25% greater WLL than G80 products.
••Manufactured in accordance with EN 1677
and ASME B30.9.

A ••Proof Load tested at 2.5 times the WLL with


certification for each batch manufactured.
••Fatigue rated to 20,000 cycles at 1.5 times
the WLL.
••Tempering temperature at a minimum of
400°C.
••Each link is marked with batch number that
links to test certificate with full traceability to
raw materials.
••Fully integrated shortening clutch and master
link.
L ••No reduction in WLL when shortening chain.
••Speedy assembly.
••Light weight system.
••Cost effective compared to slings which use
multiple components.
••RFID equipped.

Grab-to-go

EXTREME100 GRAB CHAIN SLING


with X-026 Self Locking Hook

For Used to Single


Grade 100 Hook Acc. to Dimensions Total Component
Item No. WLL Chain DIN15401 (mm) Length (L) N.W.
tonnes mm(inch) A B P m kg
XSB-06 1.4 06 4 120 70 28 2 2.5
XSB-08 2.5 08 5 140 80 34 3 5.8
XSB-10 4.0 10 6 160 95 44 3 9.5
XSB-13 6.7 13 10 170 105 51 3 16.5
XSB-16 10.0 16 10 190 110 60 3 25.6

.* Design factor 4:1 for components in accordance with PAS1061.

Copyright © 2018
YOKE Industrial Corp.
All Rights Reserved. 7 WARNING
NEVER EXCEED PUBLISHED WORKING LOAD LIMIT
100
GRAB CHAIN SLING

Copyright © 2018
WARNING 8
YOKE Industrial Corp.
All Rights Reserved.
NEVER EXCEED PUBLISHED WORKING LOAD LIMIT
100
GRAB CHAIN SLING

••Quenched and Tempered Alloy Steel.


B
••At least 25% greater WLL than G80 products.
••Manufactured in accordance with EN 1677
and ASME B30.9.
A
••Proof Load tested at 2.5 times the WLL with
certification for each batch manufactured.
••Fatigue rated to 20,000 cycles at 1.5 times
the WLL.
••Tempering temperature at a minimum of
400°C.
••Each link is marked with batch number that
links to test certificate with full traceability to
raw materials.
••Fully integrated shortening clutch and master
L link.
••No reduction in WLL when shortening chain.
••Speedy assembly.
••Light weight system.
••Cost effective compared to slings which use
multiple components.
••RFID equipped.

Grab-to-go

EXTREME100 GRAB CHAIN SLING


with X-043/S Clevis Hook

For Used to Single


Grade 100 Hook Acc. to Dimensions Total Component
Item No. WLL Chain DIN15401 (mm) Length (L) N.W.
tonnes mm(inch) A B P m kg
XSA-06 1.4 06 4 120 70 23 2 2.4
XSA-08 2.5 08 5 140 80 27 3 5.5
XSA-10 4.0 10 6 160 95 34 3 9.2
XSA-13 6.7 13 10 170 105 44 3 15.8
XSA-16 10.0 16 10 190 110 48 3 24.4

* Design factor 4:1 for components in accordance with PAS1061.

Copyright © 2018
YOKE Industrial Corp.
All Rights Reserved. 9 WARNING
NEVER EXCEED PUBLISHED WORKING LOAD LIMIT
100
GRAB CHAIN SLING

Copyright © 2018
WARNING 10
YOKE Industrial Corp.
All Rights Reserved.
NEVER EXCEED PUBLISHED WORKING LOAD LIMIT
100
GRAB CHAIN SLING

••Quenched and Tempered Alloy Steel.


B
••At least 25% greater WLL than G80 products.
••Manufactured in accordance with EN 1677
and ASME B30.9.

A ••Proof Load tested at 2.5 times the WLL with


certification for each batch manufactured.
••Fatigue rated to 20,000 cycles at 1.5 times
the WLL.
••Tempering temperature at a minimum of
400°C.
••Each link is marked with batch number that
links to test certificate with full traceability to
raw materials.
••Fully integrated shortening clutch and master
link.
L
••No reduction in WLL when shortening chain.
••Speedy assembly.
••Light weight system.
••Cost effective compared to slings which use
multiple components.
••RFID equipped.
P

Grab-to-go

EXTREME100 GRAB CHAIN SLING


with X-026 Self Locking Hook

For Used to Single Total


β 0-45° β 45-60° Grade 100 Hook Acc. to Dimensions Component
Item No. α 0-90° α 90-120° Chain DIN15401 (mm) Length (L) N.W.
tonnes A B P m kg
XTB-06 2.0 1.4 06 4 120 70 28 2 4.4
XTB-08 3.5 2.5 08 6 160 95 34 3 11.4
XTB-10 5.6 4.0 10 10 170 105 44 3 18.6
XTB-13 9.4 6.7 13 10 190 110 51 3 32.2
XTB-16 14.0 10.0 16 20 230 130 60 3 50.8

* Design factor 4:1 for components in accordance with PAS1061.

Copyright © 2018
YOKE Industrial Corp.
All Rights Reserved. 11 WARNING
NEVER EXCEED PUBLISHED WORKING LOAD LIMIT
100
GRAB CHAIN SLING

Copyright © 2018
WARNING 12
YOKE Industrial Corp.
All Rights Reserved.
NEVER EXCEED PUBLISHED WORKING LOAD LIMIT
100
GRAB CHAIN SLING

••Quenched and Tempered Alloy Steel.


••At least 25% greater WLL than G80 products.
B ••Manufactured in accordance with EN 1677
and ASME B30.9.
••Proof Load tested at 2.5 times the WLL with
certification for each batch manufactured.
A
••Fatigue rated to 20,000 cycles at 1.5 times the
WLL.
••Tempering temperature at a minimum of
400°C.
••Each link is marked with batch number that
links to test certificate with full traceability to
raw materials.
••Fully integrated shortening clutch and master
link.
L ••No reduction in WLL when shortening chain.
••Speedy assembly.
••Light weight system.
••Cost effective compared to slings which use
multiple components.
••RFID equipped.

Grab-to-go

EXTREME100 GRAB CHAIN SLING


with X-043/S Clevis Hook
For Used to Single Total
β 0-45° β 45-60° Grade 100 Hook Acc. to Dimensions Component
Item No. α 0-90° α 90-120° Chain DIN15401 (mm) Length (L) N.W.
tonnes mm A B P m kg
XTA-06 2.0 1.4 06 4 120 70 23 2 4.2
XTA-08 3.5 2.5 08 6 160 95 27 3 10.8
XTA-10 5.6 4.0 10 10 170 105 34 3 18.0
XTA-13 9.4 6.7 13 10 190 110 44 3 30.8
XTA-16 14.0 10.0 16 12 230 130 48 3 48.4

* Design factor 4:1 for components in accordance with PAS1061.

Copyright © 2018
YOKE Industrial Corp.
All Rights Reserved. 13 WARNING
NEVER EXCEED PUBLISHED WORKING LOAD LIMIT
100
GRAB CHAIN SLING

Copyright © 2018
WARNING 14
YOKE Industrial Corp.
All Rights Reserved.
NEVER EXCEED PUBLISHED WORKING LOAD LIMIT
100
GRAB CHAIN SLING

••Quenched and Tempered Alloy Steel.


••At least 25% greater WLL than G80 products.
B ••Manufactured in accordance with EN 1677
and ASME B30.9.
••Proof Load tested at 2.5 times the WLL with
certification for each batch manufactured.
A ••Fatigue rated to 20,000 cycles at 1.5 times
the WLL.
••Tempering temperature at a minimum of
400°C.
••Each link is marked with batch number that
links to test certificate with full traceability to
raw materials.
L ••Fully integrated shortening clutch and master
link.
••No reduction in WLL when shortening chain.
••Speedy assembly.
••Light weight system.
••Cost effective compared to slings which use
multiple components.
P
••RFID equipped.

Grab-to-go

EXTREME100 GRAB CHAIN SLING


with X-026 Self Locking Hook

For Used to Single


β 0-45° β 45-60° Grade 100 Hook Acc. to Dimensions Total Component
Item No. α 0-90° α 90-120° Chain DIN15401 (mm) Length (L) N.W.
tonnes mm A B P m kg
XQB-06 2.9 2.1 06 6 160 95 28 2 9.2
XQB-08 5.3 3.8 08 10 170 105 34 3 22.7
XQB-10 8.4 6.0 10 10 190 110 44 3 36.8
XQB-13 14.1 10.1 13 12 230 130 51 3 63.2
XQB-16 21.0 15.0 16 20 275 150 60 3 98.0

* Design factor 4:1 for components in accordance with PAS1061.

Copyright © 2018
YOKE Industrial Corp.
All Rights Reserved. 15 WARNING
NEVER EXCEED PUBLISHED WORKING LOAD LIMIT
100
GRAB CHAIN SLING

Copyright © 2018
WARNING 16
YOKE Industrial Corp.
All Rights Reserved.
NEVER EXCEED PUBLISHED WORKING LOAD LIMIT
100
GRAB CHAIN SLING

••Quenched and Tempered Alloy Steel.


B ••At least 25% greater WLL than G80 products.
••Manufactured in accordance with EN 1677
and ASME B30.9.
••Proof Load tested at 2.5 times the WLL with
certification for each batch manufactured.
A
••Fatigue rated to 20,000 cycles at 1.5 times the
WLL.
••Tempering temperature at a minimum of 400°C.
••Each link is marked with batch number that
links to test certificate with full traceability to
raw materials.
L ••Fully integrated shortening clutch and master
link.
••No reduction in WLL when shortening chain.
••Speedy assembly.
••Light weight system.
••Cost effective compared to slings which use
multiple components.
P ••RFID equipped.

Grab-to-go

EXTREME100 GRAB CHAIN SLING


with X-043/S Clevis Hook
For Used to Single
β 0-45° β 45-60° Grade 100 Hook Acc. to Dimensions Total Component
Item No. α 0-90° α 90-120° Chain DIN15401 (mm) Length (L) N.W.
tonnes mm A B P m kg
XQA-06 2.9 2.1 06 6 160 95 23 2 8.8
XQA-08 5.3 3.8 08 10 170 105 27 3 21.5
XQA-10 8.4 6.0 10 10 190 110 34 3 35.6
XQA-13 14.1 10.1 13 12 230 130 44 3 60.4
XQA-16 21.0 15.0 16 20 275 150 48 3 93.2

* Design factor 4:1 for components in accordance with PAS1061.

Copyright © 2018
YOKE Industrial Corp.
All Rights Reserved. 17 WARNING
NEVER EXCEED PUBLISHED WORKING LOAD LIMIT
100
GRAB CHAIN SLING

XSB Series | p.06 XSA Series | p.08 XTB Series | p.10 XTA Series | p.12

XQB Series | p.14 XQA Series | p.16

Copyright © 2018
WARNING 18
YOKE Industrial Corp.
All Rights Reserved.
NEVER EXCEED PUBLISHED WORKING LOAD LIMIT
100
GRAB CHAIN SLING

100
GRAB CHAIN SLING

Copyright © 2018
YOKE Industrial Corp.
All Rights Reserved. 19 WARNING
NEVER EXCEED PUBLISHED WORKING LOAD LIMIT
An ISO 9001 Registered Company

YOKE INDUSTRIAL CORP.


#39, 33rd Road,
Taichung Industrial Park,
Taichung 407,
TAIWAN
Tel : +886-4-2350-8088
Fax : +886-4-2350-1001
E-mail : info@mail.yoke.net

www.yoke.net

You might also like