Scribd
Upload
89 views5 pages

Instruction Manual: Series

This 3 sentence summary provides the key details about the instruction manual for a Digital Motor Protection Relay: The instruction manual outlines safety precautions and instructions for installing and using a Digital Motor Protection Relay that monitors 3-phase current, displays load ratio, and protects motors from overcurrent, undercurrent, phase loss, and other issues. The relay has extensive current monitoring range from 0.5 to 60 amps and displays trouble causes to help identify and resolve issues. Installation and maintenance should only be performed by qualified engineers with knowledge of electrical safety procedures.

Uploaded by

Siva Nandham
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
89 views5 pages

Instruction Manual: Series

This 3 sentence summary provides the key details about the instruction manual for a Digital Motor Protection Relay: The instruction manual outlines safety precautions and instructions for installing and using a Digital Motor Protection Relay that monitors 3-phase current, displays load ratio, and protects motors from overcurrent, undercurrent, phase loss, and other issues. The relay has extensive current monitoring range from 0.5 to 60 amps and displays trouble causes to help identify and resolve issues. Installation and maintenance should only be performed by qualified engineers with knowledge of electrical safety procedures.

Uploaded by

Siva Nandham
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Instruction Manual

Digital Motor Protection Relay


(DMP Series)

Series
Thank you for purchasing the LG Inc.DMP Series.
SAFETY PRECAUTIONS
Be sure to read the instruction manual and safety
precautions before use products.
This manual should be given to the person who
actually uses the products and is responsible for
their maintenance.
! WARNING : Offending against the message
will result in death or serious injury.
! CAUTION : Incorrect handling of the device
may result in minor injury or
physical damage.
■ Introduction

ㆍ Digital three-phase Ammeter and various Motor protection function.


The amount of the three-phase current is each displayed by
pressing the key. In normal, the maximal current is always displayed.
ㆍ By using the Bar-LED arrays. The loading ratio is always displayed
from 60% to 110% in normal.
ㆍ Extensive current range : 0.5 ~ 60A
ㆍ The trouble cause is displayed in the indicator,is easy to recover it.

! WARNING

ㆍ Trun off the upstream breaker before installing or service to


prevent electric shocks and burn due to short circuit.
ㆍ Do not touch any live naked terminals.
It make an electric shock.

! CAUTION

■ Installation

ㆍ Compare the product with that order us.


The Product which is different from order is may cause a malfunction or a fire.
ㆍ Check the parts to miss or crack by transportation
ㆍ Installation, maintenance and inspection of the
product should be performed by qualified engineers having special
knowledge.
ㆍ Be careful not to exchange with main units and display units
in combining.
It may cause a current indication error.

1
! CAUTION

ㆍ Check the communication cable to insert smoothly.


ㆍ Combine the display units with the main units in tight,
Or its Relay contact is opened.
ㆍ Please check the relay by pressing the TEST/RESET Key before
running the Motor,
ㆍ Insert the finger proof necessarily in the terminal block,after
wiring in case of screw type products.
ㆍ Refer to wiring diagram for proper terminal
connection.
ㆍ After wiring, Cover the Finger Proof necessarily.
ㆍ Use the product in a range of the rated voltage and current
shown on the name plate.
It may cause a malfunction.
ㆍ When the device useless, it should be dispose of them as
an Industrial waste.

Display units
3-phase current/Trouble cause

R-phase
S-phase Load ratio
T-phase
Display
Test/Reset
Func Sel
Current
Time

2
Trouble information

Protection show Description


More than set current
Overcurrent O-L
Within the set time
Lower than the undercurrent set ratio
Undercurrent Und
Within 3S
Reverse phase r-P Within 0.1S
Over 70% of the rate of
Phase Loss P-F unbalance : Within 3S
Phase Over 50% of the rate of
P-F unbalance : Within 5S
unbalance
STALL StL 180% than seting current within 5S
More than the lock set current
LOCK Loc
ratio : Within 0.5S
Instantaneous More than the instantaneous set
Sho
Current current ratio : Within 0.1S
More than the set ground current
Ground fault g-F
within the set time
Alert Bar-Leds Load Ratio(60~110%)

Installation Dimension

Ordering Method

DMP 06 S E Z 220

Current Wiring TYPE OPTION control Volt.


06 0.5~6.0A S Screw E Separate Z Ground 220 AC220V
60 5.0~60A T Tunnel - Unify I Instant. 110 AC110V

3
☞ Refer to the catalog and home page(www.lgis.com)
for further details.

• Client Consultation center :


LG ,Kayang, Kangseo-gu, Seoul 157-803,Korea
(TEL: 82-1544-2080 FAX: 82-2-3660-7021)

MEMO

7956 2121 001


4

You might also like