Sir Shabbir

Introduction to Oxidation and Reduction

Jungee
OXIDATION and REDUCTION - REDOX REACTIONS
OXIDATION - definition and examples REDUCTION - definition and examples
(a) The gain or addition of oxygen by an (b) The loss or removal of oxygen from a
atom, molecule or ion eg ... compound etc. eg ...

(1) S ==> SO2 [burning sulphur - oxidised] (1) CuO ==> Cu [loss of oxygen from copper(II)
oxide to form copper atoms]
(2) CH4 ==> CO2 + H2O [burning methane
to water and carbon dioxide, C and H gain O] (2) Fe2O3 ==> Fe [iron(III) oxide reduced to iron]

(3) NO ==> NO2 [nitrogen monoxide (3) NO ==> N2 [nitrogen monoxide reduced to
oxidised to nitrogen dioxide] nitrogen]

(4) SO32- ==> SO42- [oxidising the sulphite (4) SO3 ==> SO2 [sulphur trioxide reduced to sulphur
ion to the sulphate ion] dioxide]
(c) The loss or removal of electrons from (d) The gain or addition of electrons by an atom,
an atom, ion or molecule eg ion or molecule eg ...

(1) Fe ==> Fe2+ + 2e- [iron atom loses 2 (1) Cu2+ + 2e- ==> Cu [the copper(II) ion gains 2
electrons to form the iron(II) ion] electrons to form neutral copper atoms)

(2) Fe2+ ==> Fe3+ + e- [the iron(II) ion loses (2) Fe3+ + e- ==> Fe2+ [the iron(III) ion gains an
1 electron to form the iron(III) ion] electron and is reduced to the iron(II) ion]

(3) 2Cl- ==> Cl2 + 2e- [the loss of electrons (3) 2H+ + 2e- ==> H2 [hydrogen ions gain electrons
by chloride ions to form chlorine molecules] to form neutral hydrogen molecules]
(e) An oxidising agent is the species that (f) A reducing agent is the species that removes
gives the oxygen or removes the the oxygen or acts as the electron donor
electrons
REDOX REACTIONS - in a reaction overall, oxidation and reduction must go together
(g) Redox reaction analysis based on the oxygen definitions
 (1) copper(II) oxide + hydrogen ==> copper + water
o CuO(s) + H2(g) => Cu(s) + H2O(g)
o copper oxide reduced to copper, hydrogen is oxidised to water
o hydrogen is the reducing agent (removes O from CuO)
o copper oxide is the oxidising agent (donates O to hydrogen)
 (2) iron(III) oxide + carbon monoxide ==> iron + carbon dioxide
o Fe2O3(s) + 3CO(g) => 2Fe(l) + 3CO2(g)
o the iron(III) oxide is reduced to iron, the carbon monoxide is oxidised to carbon dioxide
o CO is the reducing agent (O remover from Fe2O3)
o the Fe2O3 is the oxidising agent (O donator to CO)]
 (3) nitrogen monoxide + carbon monoxide ==> nitrogen + carbon dioxide
o 2NO(g) + 2CO(g) ==> N2(g) + 2CO2(g)
o nitrogen monoxide is reduced to nitrogen
o carbon monoxide is oxidised to carbon dioxide
o CO is the reducing agent and NO is the oxidising agent
 Sir Shabbir Jungee
 (4) iron(III) oxide + aluminium ==> aluminium oxide + iron (the thermit reaction)
o Fe2O3(s) + 2Al(s) ==> Al2O3(s) + 2Fe(s)
o iron(III) oxide is reduced and is the oxidising agent
o aluminium is oxidised and is the reducing agent

(h) Redox reaction analysis based on the electron definitions

 (1) magnesium + iron(II) sulphate ==> magnesium sulphate + iron
o Mg(s) + FeSO4(aq) => MgSO4(aq) + Fe(s)
o this is the 'ordinary molecular' equation for a typical metal displacement reaction,
but this does not really show what happens in terms of atoms, ions and electrons, so we
use ionic equations like the one shown below.
o The sulphate ion SO42-(aq) is called a spectator ion, because it doesn't change in the
reaction and can be omitted from the ionic equation. No electrons show up in the full
equations because electrons lost by x = electrons gained by y!!
o Mg(s) + Fe2+(aq) ==> Mg2+(aq) + Fe(s)
o the magnesium atom loses 2 electrons (oxidation) to form the magnesium ion, the
iron(II) ion gains 2 electrons (reduced) to form iron atoms.
o Mg is the reducing agent (electron donor) and the Fe2+ is the oxidising agent (electron
remover or acceptor)
o Displacement reactions involving metals and metal ions are electron transfer
reactions.
 (2) zinc + hydrochloric acid ==> zinc chloride + hydrogen
o Zn(s) + 2HCl(aq) => ZnCl2(aq) + H2(g)
o the chloride ion Cl- is the spectator ion
o Zn(s) + 2H+(aq) ==> Zn2+(aq) + H2(g)
o Zinc atoms are oxidised to zinc ions by electron loss, so zinc is the reducing agent
(electron donor)
o hydrogen ions are the oxidising agent (gaining the electrons) and are reduced to form
hydrogen molecules
 (3) copper + silver nitrate ==> silver + copper(II) nitrate
o Cu(s) + 2AgNO3(aq) ==> 2Ag + Cu(NO3)2(aq)
o the nitrate ion NO3- is the spectator ion
o Cu(s) + 2Ag+(aq) ==> 2Ag(s) + Cu2+(aq)
o copper atoms are oxidised by the silver ion by electron loss
o electrons are transferred from the copper atoms to the silver ions, which are reduced
o the silver ions are the oxidising agent and the copper atoms are the reducing agent
 (4) iron(II) chloride + chlorine ==> iron(III) chloride
 (5) halogen (more reactive) + halide salt (of less reactive halogen) ==> halide salt (of
more reactive halogen) + halogen (less reactive)
o X2(aq) + 2KY(aq) ==> 2KX(aq) + Y2(aq)
o X2(aq) + 2Y-(aq) ==> 2X-(aq) + Y2(aq)
o where halogen X is more reactive than halogen Y, F > Cl > Br > I)
o X is the oxidising agent (electron acceptor)
o KY is the reducing agent (electron donor)
 (6) Electrode reactions in electrolysis are electron transfer redox changes
o at the negative cathode positive ions are attracted:
 metal ions are reduced to the metal by electron gain:
 Mn+ + n e- ==> M
 n = the numerical charge of the ion and the number of electrons transferred
 or 2H+(aq) + 2e- ==> H2(g) (for the discharge of hydrogen)

2
 Sir Shabbir Jungee
o at the positive anode negative ions are attracted:
 negative non-metal ions are oxidised by electron loss eg
 for oxide ions: 2O2- - 4e- ==> O2 or 2O2- ==> O2 + 4e-
 for hydroxide ion: 4OH- - 4e- ==> O2 + 2H2O or 4OH- ==> O2 + 2H2O +
4e-
 for halide ions (X = F, Cl, Br, I): 2X- - 2e- ==> X2 or 2X- ==> X2 + 2e-

Miscellaneous Redox Notes

 Redox changes can often be observed as significant colour changes eg
o iron + copper(II) sulphate ==> iron(II) sulphate + iron
 Mg(s) + FeSO4(aq) => MgSO4(aq) + Fe(s)
 Mg(s) + Fe2+(aq) ==> Mg2+(aq) + Fe(s)
 Sulphate, SO42-(aq), is colourless BUT a blue to pale green colour change is
observed in the solution as the blue copper(II) ion is replaced by the pale
green iron(II) ion.
o Potassium manganate(VII) is a powerful oxidising agent and an intense purple
colour in water due to the MnO4- ion. In acidified solution it changes to an almost
colourless* manganese(II) ion, Mn2+ when it oxidises something (* which actually is a
very pale pink transition metal ion).
o Potassium dichromate(VI) is another strong oxidising agent and is orange due to
the dichromate(VI) ion, Cr2O72- ion. When it oxidises something it changes to the
green chromium(III) ion, Cr3+.
o Potassium iodide is a colourless salt dissolving in water to form a colourless solution.
If it is oxidised eg with chlorine a yellow=>orange==>brown colour develops as
iodine is formed from the colourless iodide ion.
 The use of Roman Numerals in names:
o This indicates what is called the oxidation state of an atom in a molecule or ion.
o It is easy to follow for simple metal ions because it equals the charge on the ion
 eg the oxidation state of copper in the copper(II) ion is referred to as +2
 the more electrons removed from the atom or ion by oxidation, the
higher its oxidation state eg Fe2+ - e- ==> Fe3+, gives iron the oxidation
state of +3 in the iron(III) ion (via a suitable oxidising agent).
 but for more complex ions things are not so simple.
 in manganate(VII) ion, the Mn is in the +7 oxidation state
 in dichromate(VI) ion, the Cr is in the +6 oxidation state
o This topic is dealt with at AS-A2 advanced level chemistry (there is an introduction on
another web page) but not for KS4-GCSE!

Oxidation Number

Oxidation numbers are a useful tool for determining whether a substance has been oxidized or
reduced. An element that undergoes a change in oxidation number in the course of a reaction has
been oxidized or reduced. Let's learn how to assign oxidation numbers.

3
 Sir Shabbir Jungee
Assigning Oxidation Numbers

1. At atom in its elemental state has an oxidation number of 0.

Na H2 Cl2 S Xe

Each atom in these elements has an oxidation number of 0.

2. An atom in a monoatomic ion has an oxidation number identical to its charge.

Na+ Ba2+ Al3+ Br– S2–

+1 +2 +3 –1 –2

The oxidation number is equal to the charge on the monoatomic ion.

3. An atom in a polyatomic ion or a molecular compound usually has the same oxidation
number it would have if it were in a monoatomic ion.

a. Elements to the left on the periodic table are "cationlike" and have positive oxidation
numbers.

b. Elements to the right on the periodic table are "anionlike" and have negative oxidation
numbers.

Consider NH3.

N has an oxidation number of –3; each H has an oxidation number of +1.

c. Hydrogen

has a +1 oxidation number when bonded to nonmetals, and

has a –1 oxidation number when bonded to a metal.

NaH (H –1 oxidation number)

H2O (H +1 oxidation number)

d. Oxygen

often has a –2 oxidation number, but

can have a –1 oxidation number in the peroxide ion, O22–.

H2O (O –2 oxidation number)

4
HOOH (O –1 oxidation number)
Sir Shabbir Jungee
e. Halogens

usually have an oxidation number of –1,

Unless bonded to oxygen, when they have a positive oxidation number.

HCl (Cl –1 oxidation number)

HOCl (Cl +1 oxidation number)

4. The sum of the oxidation numbers is 0 for a neutral compound and is equal to the net charge
for a polyatomic ion.
Oxidizing and Reducing agents
Oxidation and reduction always occur together. Whenever one atom loses electrons (is
oxidized), another atom must gain those electrons (be reduced). The reactants can be
classified as either a reducing agent or an oxidizing agent.

Reducing agent

 causes reduction
 loses one or more electrons
 is oxidized
 oxidation number of atom increases

Oxidizing agent

 causes oxidation
 gains one or more electrons
 is reduced
 oxidation number of atom decreases

5
 Sir Shabbir Jungee
The Activity Series of the Elements

The elements at the top of the table readily give up electrons and are stronger reducing
agents. The elements at the bottom give up electrons less readily and are weaker reducing
agents. Any element higher in the activity series will react with the ion of any element
lower in the activity series.

Some Applications of Redox Reactions

A vast number of redox reactions occur in industrial and biological processes. A few are summarized here.

1. Combustion is the burning of fuel by oxidation with oxygen in air. Fuels include natural gas, wood,
paper, and other organic substances composed of carbon and hydrogen. Some metals also burn in air.

CH4(q) + 2 O2(g) CO2(g) + 2 H2O(l)

2Mg(s) + 2 O2(g) 2 MgO(s)

2. Bleaching is the use of redox reactions to decolorize or lighten colored materials. Oxidizing agents
used in bleaching include hydrogen peroxide (H2O2) and sodium hypochlorite (NaClO).

3. Batteries are all based on redox reactions.

4. Metallurgy is the science of extracting and purifying metals from their ores.

6
5. Sir Shabbir Jungee
Undesirable oxidation reactions are termed corrosion. The rusting of iron in moist air is a familiar
process with enormous economic impact.

4 Fe(s) + 3 O2(g) Fe2O3H2O(s)

6. Respiration is the process of breathing and using oxygen for the many biological redox reactions
that occur in living organisms.

C6H12O6(s) + 6 O2(g) 6 CO2(g) + 6 H2O(l) + energy

DONE