Horns

Specifications

HF Compression drivers
Nominal Diameter 460 mm (18 in)
Nominal Impedance 8Ω
Minumum Impedance 6.5 Ω
Power Handling
(40 –400 Hz)
Nominal1 700 W
Continuous Program2 1400 W
Sensitivity (1W/1m)3 97 dB
Frequency Range 40-2000 Hz
Voice Coil Diameter 100 mm (4 in)
Winding Material Copper
Former Material Glass Fibre
Winding Depth 21 mm (13/16 in)
Magnetic Gap Depth 8 mm (5/16 in)
Flux Density 1.15 T

Coaxials
Also available in 4 Ω, data upon request

Thiele & Small Parameters4

HPL
Qes 0.39
Qms 9.4
Qts 0.37
Vas 155 dm3 (5.5 ft3)

Speakers
Sd 1134 cm2 (175.8 in2)
η0 3.2%
X max ± 8 mm
X Var ± 8 mm
18 PZB 46 | Woofer Mms
Bl
155 g
24.1 T·m
Le 2.6 mH
Very long excursion 18” woofer with 1400W power handling for subwoofer
application where excellent reproduction of the lowest frequencies is
mandatory. A special 4" voice coil using proprietary high temperature
Mounting and Shipping Information
adhesives and an optimized magnet assembly guarantee very good LF
dynamic range, low power compression and a very low distortion figure. A
Overall Diameter 460 mm (18 in)
double spider with optimized compliance ensures excellent mechanical
Bolt Circle Diameter 440 mm (17.3 in)
stability even in the hardest working conditions.
Baffle Cutout Diameter 422 mm (16.6 in)
Depth 198 mm (7.8 in)
Flange and Gasket Thickness 16 mm (5/8 in)
Net Weight 13 kg (28.6 lb)
Shipping Weight 14.8 kg (32.6 lb)
Shipping Box 520x520x240 mm
(20.5x20.5x9.4 in)
1
2 hours test made with continuous pink noise signal (6 dB crest factor) within the
specified range. Power calculated on rated minimum impedance. Loudspeaker in
free air.
2
Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
3
Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance. Average
SPL from 200 to 2000Hz.
4
Thiele-Small parameters are measured after a high level 20 Hz sine wave precon-
ditioning test.