Evonik-Surfynol DF-37 Dewebbing (Defoamer) Latex Gloves
Evonik-Surfynol DF-37 Dewebbing (Defoamer) Latex Gloves
Evonik-Surfynol DF-37 Dewebbing (Defoamer) Latex Gloves
well as coating and ink formulations, among other industrial Viscosity @ 20°C (mPas) 356
applications. Because of its wetting capabilities, the tendency Specific Gravity @ 20°C 0.97-0.98
for Surfynol DF-37 defoamer to cause fisheyes, craters, Flash Point (°C) >109
retraction and other surface defects is significantly reduced Pour Point (°C) 3
Recommended usage
Advantages
Use between 0.1 and 0.5% of total formulation weight in
• Excellent defoaming
coatings. Use between 0.5 and 0.3% of total formulation
• Inherent surfactant properties to improve wet-out of
weight for dewebbing. Add on a wet basis, then mix under
improperly cleaned forms and low energy substrates
moderate shear for 15-30 minutes.
• Excellent latex compatibility
• Superior dewebbing, even at low concentrations
• Good freeze-thaw stability
Storage and handling
• Compliant under certain FDA regulations
Keep containers tightly closed in a dry, cool, and well-ventilated
place. Mix thoroughly before use. Product is freeze-thaw
applications
stable; product may separate on standing or freezing; bring
• Latex dipping product to 20-30°C and mix thoroughly before use.
• Water-based coatings and inks
• Adhesives
Shelf Life
• Concrete and drymix mortars
• Metalworking fluids The shelf life for this product is 12 months from the date of
• Paper coatings manufacture.
Handling Precautions
Refer to the Safety Data Sheet for Surfynol DF-37 defoamer.
©Evonik Corporation, 2017 | Surfynol® DF-37 Defoamer | July 2017 2/2 120-13-061-GLB