Scribd
Upload
72 views2 pages

Materials Entry Pass: Items Declaration Sheet

Omni-Crest Philippines Inc. is allowed to enter various equipment and tools into the Laguna Gateway Inland Container Terminal premises for a project. The list includes welding machines, power tools, pipes, valves, fittings and other hardware totaling 29 items. All items must be physically inspected upon entry and any important items put in secured areas under CCTV surveillance. The company is responsible for informing terminal management before transferring or removing items.

Uploaded by

mark mortera
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
72 views2 pages

Materials Entry Pass: Items Declaration Sheet

Omni-Crest Philippines Inc. is allowed to enter various equipment and tools into the Laguna Gateway Inland Container Terminal premises for a project. The list includes welding machines, power tools, pipes, valves, fittings and other hardware totaling 29 items. All items must be physically inspected upon entry and any important items put in secured areas under CCTV surveillance. The company is responsible for informing terminal management before transferring or removing items.

Uploaded by

mark mortera
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 2

MATERIALS ENTRY PASS

ITEMS DECLARATION SHEET

DATE:
COMPANY NAME: Omni-Crest Philippines Inc.
NAME: Mark Louie Mortera POSITION/TITLE: PIC
SIGNATURE:

The above company is allowed to enter their equipment/items/articles inside Laguna Gateway Inland Container
Container Terminal (LGICT) premises as declared below:

NO. EQUIPMENT/ITEMS DESCRIPTION MAKE/SERIAL # QUANTITY PURPOSE REMARKS


1 Hot water system skid 1-lot
2 hot water system piping 1-lot
3 Fabricated Support 1-lot
#01907018296/
4 Esab Welding machine OC-017 1-unit

5 Hilti Angle Grinder 4" #072018 1-unit


6 Hilti Electric Drill #560924 1-unit
7 Fire Extingisher 1-cyl
8 Combination Wrench 6-32 1-set
9 Allen Wrench 1-set
10 Pipe Wrench 2-pcs
11 Royal Cord Extension 2-lot
12 Adjustable Wrench 1-pcs
13 Welding Mask 1-pcs
14 Face Shield 1-pcs
15 Ball Hammer 1-pcs
16 Half Round File 1-pcs
17 Round File 1-pcs
18 SS Dyna Bolt M16 25-pcs
19 SS Dyna Bolt M12 25-pcs
20 SS Dyna Bolt M8 25-pcs
21 SS Bolt & Nut M16x75 35-pcs
22 SS304 Pipe 1-1/2"x6m Sch. 40 1-len
23 SS304 Pipe 2-1/2"x6m Sch. 41 1-len
24 SS304 Flange 2-1/2" 8-pcs
25 Metalic Gasket 2-1/2 4-pcs
26 SS Ball valve 1-1/2 1-pcs
27 SS Elbow 1-1/2 2-pcs
28 SS Check Valve 2-1/2" 1-pcs
29 Padlock 2-pcs

NOTE:
● LGICT Management and Security personnel are not liable for any loss items without proper turn over or
undeclared items.
● All items that are declared must be physically inspected and attested upon dropping.
● Important items must be put in the secured places and covered by CCTV.
● Inform LGICT Management and Security personnel before transferring and/or pulling out of items.

Dropping Location/Site: Terms: Short term ( )


Long term ( )
Acknowledged and approved by:
LGICT/NCT Personnel
Attested by:
Guard On-Duty
Noted by:
Security Officer-In-Charge/Deputy

You might also like