Scribd Logo
Upload

Welcome to Scribd!

  • 130 views

    Bss Fds360 Service Manual

    Uploaded by

    okan uysal
    This document discusses filters and frequency tables for the FDS-360 audio system. It provides details on standard Linkwitz-Riley filters used, including component values for various frequencies. It also describes how to modify a frequency card to function as a full range output by removing filtering for the third frequency point. Tables list component values for standard and modified frequency cards. Diagrams show how the components relate and how to modify cards.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Bss Fds360 Service Manual

    Uploaded by

    okan uysal
    130 views8 pages
    This document discusses filters and frequency tables for the FDS-360 audio system. It provides details on standard Linkwitz-Riley filters used, including component values for various frequencies. It also describes how to modify a frequency card to function as a full range output by removing filtering for the third frequency point. Tables list component values for standard and modified frequency cards. Diagrams show how the components relate and how to modify cards.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document discusses filters and frequency tables for the FDS-360 audio system. It provides details on standard Linkwitz-Riley filters used, including component values for various frequencies. It also describes how to modify a frequency card to function as a full range output by removing filtering for the third frequency point. Tables list component values for standard and modified frequency cards. Diagrams show how the components relate and how to modify cards.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    130 views8 pages

    Bss Fds360 Service Manual

    Uploaded by

    okan uysal
    This document discusses filters and frequency tables for the FDS-360 audio system. It provides details on standard Linkwitz-Riley filters used, including component values for various frequencies. It also describes how to modify a frequency card to function as a full range output by removing filtering for the third frequency point. Tables list component values for standard and modified frequency cards. Diagrams show how the components relate and how to modify cards.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 8

    Filters and Frequency Tables

    18.0 Filters and Frequency Tables


    18.1 Standard The standard filter provided for the FDS-360 is of the Linkwitz-Riley response
    based on two second order Butterworth circuits in series. The response is a
    Filters 24dB/OCT slope with a 'corner' frequency where the output of the filter if 6dB
    down from its pass band level. The use of these filter realisations has been
    well documented and provides the best possible phase and amplitude response
    for driving large speaker systems.
    Table 17.1 lists the component values for various frequencies and should be
    used in conjunction with the drawing for the FDS-360F frequency card (See
    Figure 18.3). Blank cards, or ready made cards can be provided by any BSS
    dealer.
    All resistors should be ¼W metal film 2% tolerance or better. Capacitors
    should be 5% tolerance or better. Figure 18.1 shows how these components
    relate to the separate filter blocks to assist in making mixed frequency cards
    that might be needed for speaker systems that require gaps or overlaps in the
    amplitude response of the filters. Other filter responses can also be realised
    using these frequency cards, and your dealer will be able to supply these to
    order.

    18.2 Full Range Should the fourth band output be required to work as a full range buffered
    output (See section 14.1), a full range frequency card is required to be inserted
    Frequency Card into FC3 position. This card removes all filtering associated with the third
    frequency point. The limiter setting capacitor C10 should be chosen to suit the
    lowest frequency in the band, which would normally be 30Hz. Figure 18.4
    shows the frequency card modified for this result.
    Fig 18.1 Frequency and
    Component Function

    27
    Filters and Frequency Tables

    Fig 18.2 Component


    Values for Frequency
    Cards type FDS-360/1

    FDS-360 FREQUENCY CARD COMPONENT SELECTION - 24dB/Octave

    Freq. R1 R1 R5 R5 C1 C10 C9
    50 43k 47k 82k 100k 100nF 330nF 150nF
    60 36k 39k 75k 75k 100nF 330nF 150nF
    63 33k 39k 47k 150k 100nF 330nF 150nF
    70 16k - 39k 180k 100nF 330nF 150nF
    80 15k 220k 39k 100k 100nF 220nF 100nF
    100 18k 30k 24k 330k 100nF 220nF 100nF
    110 12k 68k 39k 43k 100nF 150nF 68nF
    125 18k 18k 18k - 100nF 150nF 68nF
    150 7k5 - 15k - 100nF 150nF 68nF
    160 8k2 47k 15k 220k 100nF 150nF 68nF
    180 6k2 - 13k 330k 100nF 150nF 68nF
    200 18k 330k 39k 270k 33nF 150nF 68nF
    220 18k 100k 100k 47k 33nF 100nF 47nF
    250 15k 150k 27k - 33nF 100nF 47nF
    280 13k 180k 43k 56k 33nF 100nF 47nF
    300 15k 47k 27k 150k 33nF 100nF 47nF
    350 15k 27k 39k 39k 33nF 100nF 47nF
    400 10k 56k 18k 330k 33nF 100nF 47nF
    500 6k8 - 15k 150k 33nF 47nF 22nF
    600 6k2 68k 15k 47k 33nF 47nF 22nF
    800 39k 22k 39k 100k 10nF 47nF 22nF
    1k0 12k 180k 47k 43k 10nF 33nF 15nF
    1k2 10k 150k 27k 62k 10nF 33nF 15nF
    1k3 10k 68k 18k 470k 10nF 33nF 15nF
    1k5 7k5 - 15k - 10nF 22nF 10nF
    1k6 8k2 47k 22k 39k 10nF 22nF 10nF
    2k0 8k2 18k 12k 180k 10nF 22nF 10nF
    2k5 18k 56k 27k - 3n3F 15nF 4n7F
    3k0 15k 47k 24k 470k 3n3F 15nF 4n7F
    3k5 10k 330k 24k 100k 3n3F 15nF 4n7F
    3k7 39k 12k 27k 56k 3n3F 15nF 4n7F
    4k0 10k 56k 39k 30k 3n3F 15nF 4n7F
    4k5 8k2 100k 18k 100k 3n3F 10nF 3n3F
    5k0 6k8 - 18k 56k 3n3F 10nF 3n3F
    5k5 6k2 - 13k 270k 3n3F 10nF 3n3F
    6k0 6k2 68k 15k 47k 3n3F 10nF 3n3F

    28
    FDS-360 FREQUENCY CARD COMPONENT SELECTION - 24dB/Octave
    See Notes at bottom for full component ID.
    Freq. R1A R1B R5A R5B C1A C10 C9
    6k3 27k 6k8 27k 18k 3n3F 10nF 3n3F
    6k5 22k 6k8 12k 82k 3n3F 10nF 3n3F
    7k0 39k 5k6 13k 39k 3n3F 10nF 3n3F
    7k5 10k 8k2 18k 18k 3n3F 6n8F 2n2F
    8k0 10k 7k5 10k 62k 3n3F 6n8F 2n2F
    8k5 4k7 27k 8k2 330k 3n3F 6n8F 2n2F
    9k0 3k9 120k 8k2 100k 3n3F 6n8F 2n2F
    9k5 15k 56k 82k 33k 1n0F 6n8F 2n2F
    10k0 15k 47k 43k 47k 1n0F 6n8F 2n2F
    12k0 12k 43k 27k 62k 1n0F 6n8F 2n2F
    15k0 7k5 - 15k - 1n0F 6n8F 2n2F
    18k0 6k2 - 15k 82k 1n0F 6n8F 1n0F
    20k0 5k6 - 13k 82k 1n0F 6n8F 1n0F

    R1A = R1A, R2A, R3A, R4A, R6A, R8A


    R1B = R1B, R2B, R3B, R4B, R6B, R8B
    R5A = R5A, R7A
    R5B = R5B, R7B
    C1A = C1A, C1B, C2, C3, C4A, C4B, C5, C6, C7, C8
    C9 = C9
    C10 = C10

    Fig 18.3 FDS-360F R5A R7A


    C1A C2 C4A
    Component Overlay R5B R7B
    C1B C3 C4B
    R1A R3A
    R1B R3B
    6C

    7C

    8C
    A6 R
    B6 R

    A8 R
    B8 R

    R2A R4A
    5C

    R2B R4B

    1 16
    01C
    9C

    Fig 18.4 FDS-360F Full


    Range Overlay

    29

    You might also like