0% found this document useful (0 votes)
230 views

Uce-Ct220S Fault Locator: HOW TO Update Tutorial

This document provides instructions for updating the firmware of the UCE-CT220S fault locator. It describes downloading the latest firmware file from the manufacturer's website, connecting the device to a computer as a USB drive to copy over the firmware file, and then resetting the device to initiate the firmware update process, which can be monitored through the device's LED indicators. The update completes with the firmware file being deleted and the device needing to be reset.

Uploaded by

Wawan sahiri
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
230 views

Uce-Ct220S Fault Locator: HOW TO Update Tutorial

This document provides instructions for updating the firmware of the UCE-CT220S fault locator. It describes downloading the latest firmware file from the manufacturer's website, connecting the device to a computer as a USB drive to copy over the firmware file, and then resetting the device to initiate the firmware update process, which can be monitored through the device's LED indicators. The update completes with the firmware file being deleted and the device needing to be reset.

Uploaded by

Wawan sahiri
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

UCE-CT220S FAULT LOCATOR

HOW TO UPDATE TUTORIAL

UCORE ELECTRONICS
www.ucore-electronics.com

2020
Contents
1. Introduction ............................................................................................................................................. 2
2. Download the firmware ......................................................................................................................... 2
3. Connection.............................................................................................................................................. 2
4. Firmware Update ................................................................................................................................... 3

www.ucore-electronics.com 1
1. Introduction
This document shows how to update the firmware of UCE-CT220S.

2. Download the firmware


Firstly, download the latest firmware as rar file, it includes CT220S_firmware.bin. Please visit our
website for the latest firmware.

3. Connection
Firmware file (CT220S_firmware.bin) must be copied in UCE-CT220S U Disk. There are two ways
to recognize the device as an UCE-CT220S U Disk to PC.

First way,

Plug the UCE-CT220S with USB Cable to PC. SCAN and OFFSET buttons (Figure 1) are pressed
at the same time and then both buttons are released. When the device recognizes it as U Disk, the
LEDs in the RANGES group will flash. And it is listed in the 'Devices and drivers' (Figure 2).

Figure 1.

Figure 2.

www.ucore-electronics.com 2
Second way,

First, while pressing and holding ‘OFFSET’ button, Plug the UCE-CT220S with USB Cable to PC.
Finally, release the button. When the device recognizes as U Disk, LED of MODE 2 will light and it
is listed in the ‘Devices and drivers’ (Figure 2).

4. Firmware Update
After recognizing as U Disk, firmware file (CT220S_firmware.bin) must be copied in UCE-CT220S
U Disk (Figure 3). And then reset the device. To reset the device, you can unplug USB cable and
then plug it again.

Figure 3.

After reset, the update progress will start. The progress of the process can be followed from the
LEDs on the device. At the end of the process, the firmware file is deleted.

The device needs to be reset after the firmware upgrade.

www.ucore-electronics.com 3

You might also like