This document contains the settings and results from a potentiostatic electrochemical impedance spectroscopy (EIS) test. The test was run from 100 kHz to 0.1 Hz with a DC voltage of -0.6 V and AC voltage of 100 mV. The test recorded impedance measurements over 55 points in terms of Zreal, Zimag, Zsig, Zmod, and Zphz from the sample with an area of 0.86 cm^2 using a REF600 potentiostat.
This document contains the settings and results from a potentiostatic electrochemical impedance spectroscopy (EIS) test. The test was run from 100 kHz to 0.1 Hz with a DC voltage of -0.6 V and AC voltage of 100 mV. The test recorded impedance measurements over 55 points in terms of Zreal, Zimag, Zsig, Zmod, and Zphz from the sample with an area of 0.86 cm^2 using a REF600 potentiostat.
This document contains the settings and results from a potentiostatic electrochemical impedance spectroscopy (EIS) test. The test was run from 100 kHz to 0.1 Hz with a DC voltage of -0.6 V and AC voltage of 100 mV. The test recorded impedance measurements over 55 points in terms of Zreal, Zimag, Zsig, Zmod, and Zphz from the sample with an area of 0.86 cm^2 using a REF600 potentiostat.
This document contains the settings and results from a potentiostatic electrochemical impedance spectroscopy (EIS) test. The test was run from 100 kHz to 0.1 Hz with a DC voltage of -0.6 V and AC voltage of 100 mV. The test recorded impedance measurements over 55 points in terms of Zreal, Zimag, Zsig, Zmod, and Zphz from the sample with an area of 0.86 cm^2 using a REF600 potentiostat.