A Long Experience in Energy Equipment and one Goal:

T h e C u s t o m e r ’s s a t i s fa c t i o n .

GATE VALVES
Through Conduit: Slab and Expanding,
Slab and Expanding API 6A,
Fabricated Square and Round Body.
Pressure Seal - Bolted Bonnet - Cryogenic.
 Throught Conduit Gate Valves
Slab and Expanding
Design construction:

1 API 6D - ANSI B16.34

Testing according to API 6D
Marking according to MSS SP25
Fire safe design according to API 6FA-BS 6755 part2
Outside Screw and Yoke (OS&Y)

2 Floating seats with grease injector design 8”

Back seat design
Special packing with lantern ring and double ball grease injector
Electroless nickel plated slab gate and seat Vent and Drain valve
Full stellited seats and slab on request

3 Body Bonnet seal Spiral Wound (S.S. plus graphite) or RTJ

Other design at request
Valves are Full Bore or Reduced Bore
Flanges according ANSI B16.5 for size 2” to 24”

4 to ASME B 16.47 for size > 26”

Butt Welding Ends according to ANSI B16.25
Face to face according to API 6D
Suggested bevel gear operator for:

5 DN ≥ 20” Class 150 - DN ≥ 14” Class 300

DN ≥ 10” Classes 600 and 900 - DN ≥ 8” Class 1500
DN ≥ 4” Class 2500

6 For pressure and temperature

rating see material application

7 Valves are also available as expanding gate

Hydraulic, pneumatic or electric actuation on request VITAS reserves the right to change design without notice
2
 Through Conduit Gate Valves are designed in accordance
with the latest applicable revisions of API 6D for classes
ANSI ISO, 300, 600, 900, 1500 and 2500.
The design is refered to the international standard code and is
applied to verify all components and connections of the valve.
The design of the stem is checked by applying the highest
traction load caused by the slab gate which wins the reac-
tion of the seats during the opening of the valve at full desi-
gn Dp and at design temperature.
Technical Department has performed traction load tests
on stems at the Mechanical Engineering University
Department of Padova - Italy to verify the stem material
yield value and maximum allowable load according to ASME II
Part D. The seat ring are floating type-spring loaded to
assure the contact with the slab gate in a way to pro-
vide an effective tight seal even at low differential pressure
between inlet and outlet flange. The soft seat insert assures
the primary sealing and the metal contact between slab and seats is the secondary sealing. Different soft seat materials
required by Customer's specification are applied depending on the fluid process. The metal to metal seat is designed and
manufactured on request for application either with aggressive and dirty fluid or when operation at very high temperature
occurs. As an additional request, the Through Conduit Gate Valves are designed with the expanded slab with the addition
of a relief valve in the body cavity.
On request Through Conduit Gate Valves are fitted with emergency seals to restore sealing in the event of soft seal dama-
ge. The fire safe design, if required, includes a supplementary sealing gasket (graphite) to avoid leakages in case of fire and
burning of the soft seal as per BS 6755 Part 2 and / or API 6FA.

EXCELLENT DOUBLE BLOCK AND BLEED CAPABILITY

AUTOMATIC RELIEF OF EXCESS BODY PRESSURE

➋ ➌
With equal pressure throughout the valve and gate in closed position. An initial seal (1) is formed with the raised TFE ring
on the faces of the seats. The seat inserts clean both sides of the gate each time the valve is opened or closed. Powerful springs
assure sealing independent of high pressure, low pressure, or vacuum providing a constant contact during any type of operation.

➋ As line pressure (2) is applied to the valve, it acts on the

gate, forcing it against the seat ring on the downstream seat, a
seal is formed (a the beginning a TFE-to-metal seal, then
metal-to-metal). The O-ring (3) prevents any downsteal flow at
this point. An upstream seal is provided when body pressure
is bled off. This is caused by the force of line pressure acting
against the upstream seat (4) moving the seat against the gate and
providing a tight TFE-to-metal seal at this point. At the same time,
the O-ring (5) forms a tight seal with the seat and body.

➌ Valve automatically relieves itself of excessive body pres-

sure.When body pressure exceeds line pressure, from such cau-
ses as thermal expansion, the upstream seat is forced back into
its recess and the excess pressure in the body is bled between
the seat and the gate into the line.

Hydraulic, pneumatic or electric actuation on request VITAS reserves the right to change design without notice
3
 Throught Conduit Gate Valves Slab and Expanding
Class ANSI 150 - Full Bore
size inch 2 3 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 40 42 48
A 51 76 102 152 203 254 305 337 387 438 489 540 591 635 686 737 781 832 876 978 1022 1168
D 146 216 279 345 419 460 581 635 690 765 851 1020 1035 1180 1230 1300 1400 1460 1510 1640 1730 1980
C Travel 76 101 127 177 239 280 341 373 433 486 537 588 639 683 734 797 841 892 936 1038 1097 1243
H 470 660 762 890 1103 1450 1680 1867 2037 2223 1792 1942 2075 2182 2372 2490 2600 2690 2890 3039 3282 3577
H1 - - - - - - - - - - 2449 2610 2874 3015 3256 3437 3591 3732 3976 4227 4528 4970
L BW 216 283 305 403 419 457 502 572 610 660 711 762 813 864 914 914 965 1016 1016 1118 1168 1321
L RF 178 203 229 267 292 330 356 381 406 432 457 508 508 559 610 660 711 762 813 914 965 1118
V 250 300 300 400 500 600 600 800 800 1100 - - - - - - - - - - - -
V1 - - - - - - - - - - 600 600 600 600 600 800 800 800 800 600 800 800
Weight RF (Slab) Kg 35 55 85 142 240 350 460 600 730 900 1140 1700 2060 2300 2650 2900 3600 4500 5370 6800 7420 10420
Weight BW (Slab) Kg 30 47 76 130 225 315 430 520 615 820 1050 1610 1960 2200 2480 2615 3270 4220 5010 6350 6840 9700

Class ANSI 150 - Reduced Bore

size inch 3X2 4X3 6X4 8X6 10X8 12X10 14X12 16X14 18X16 20X18 24X20 32X24 40X36
A 51 76 102 152 203 254 305 337 387 438 489 591 876
D 146 216 280 345 420 460 581 635 690 765 851 1035 1510
C Travel 76 101 127 177 239 280 341 373 433 486 537 639 936
H 470 660 762 890 1103 1450 1680 1867 2037 2223 2300 2874 3976
H1 570 760 880 990 1303 1550 1817 2131 2290 2432 2449 2075 2760
Weight RF (Slab) Kg 30 62 70 135 200 280 385 535 632 880 1585 1780 4750
Weight BW (Slab) Kg 25 58 53 105 170 245 345 485 563 765 1345 - -

Class ANSI 300 - Full Bore

size inch 2 3 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 40 42 48
A 51 76 102 152 203 254 305 337 387 438 489 540 591 635 686 737 781 832 876 978 1022 1168
D 146 216 280 345 430 460 590 646 710 800 910 1035 1056 1200 1230 1300 1400 1460 1510 1640 1730 1960
C Travel 76 101 127 177 239 280 341 373 433 486 537 588 639 683 734 797 841 892 936 1038 1097 1243
H 470 660 760 890 1100 1450 1680 1680 1740 1825 1790 1940 2075 2180 2370 2490 2600 2690 2890 3040 3280 3580
H1 - - - - - - - - - - 2450 2610 2875 3015 3256 3440 3590 3730 3975 4225 4530 4970
L BW-RF 216 283 305 403 419 457 502 762 838 914 991 1092 1143 1245 1346 1397 1524 1625 1727 1930 2007 2286
V 250 300 300 500 600 600 800 - - - - - - - - - - - - - - -
V1 - - - - - - - 600 800 600 800 800 600 800 800 800 800 800 800 800 800 1000
Weight RF (Slab) Kg 55 85 110 240 365 500 750 1050 1480 2040 2640 3500 4260 4800 5500 6300 7000 7900 8900 12800 15000 22000
Weight BW (Slab) Kg 50 75 90 210 325 400 615 900 1340 1885 2420 3200 3950 4450 5090 5770 6440 7300 8200 12000 14000 -

Class ANSI 300 - Reduced Bore

size inch 3x2 4x3 6x4 8x6 10x8 12x10 14x12 16x14 18x16 20x18 24x20
A 51 76 102 152 203 254 305 337 387 438 489
D 146 216 280 347 405 460 590 646 710 800 910
C Travel 76 101 127 177 239 280 341 373 433 486 537
H 470 660 762 890 1103 1450 1680 1867 2037 2223 2300
H1 570 760 880 1020 1203 1550 1772 1919 2139 2432 2599
Weight RF (Slab) Kg 70 95 105 180 280 442 650 870 1190 1540 2310
Weight BW (Slab) Kg 65 86 78 140 220 390 556 790 1010 1355 2040

Class ANSI 600 - Full Bore

size inch 2 3 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 40 42 48
A 51 76 102 152 203 254 305 337 387 438 489 540 590 635 686 737 781 832 876 978 1022 1168
D 146 216 200 335 421 500 600 650 745 846 910 1020 1100 1205 1230 1375 1400 1460 1510 1640 1730 1980
C Travel 76 101 110 170 220 270 320 365 437 460 539 590 630 675 736 780 831 882 926 977 977 1218
H 470 660 756 1050 1340 1067 1201 1483 1735 1827 1790 1940 2417 2593 2370 2943 2600 2690 2890 3040 3280 3865
H1 - - - - - 1592 1702 1906 2140 2426 2600 2610 3150 3350 3255 3671 3590 3730 3975 4225 4530 5235
L BW-RF 292 356 432 559 660 787 838 889 991 1092 1194 1295 1397 1448 1549 1651 1778 1930 2083 2388 2438 2794
L RTJ 295 359 435 562 664 791 841 892 994 1095 1200 1305 1407 1461 1562 1664 1794 1946 2099 - - -
V 300 300 400 400 800 - - - - - - - - - - - - - - - - -
V1 - - - - - 600 600 600 600 600 600 600 800 800 800 800 800 800 800 800 800 800
Weight RF (Slab) Kg 65 110 156 296 650 900 1135 1700 2360 2776 4200 5500 4930 6000 8100 7900 11500 13100 15200 18500 20600 28000
Weight BW (Slab) Kg 53 102 132 270 570 768 1050 1630 2080 2470 3890 5180 4486 5680 7620 7340 10880 12380 14350 17400 - -

Class ANSI 600 - Reduced Bore

size inch 3X2 4X3 6X4 8X6 10X8 12X10 14X12 16X14 18X16 20X18 24X20
A 51 76 102 152 203 254 305 337 387 438 489
D 146 216 280 347 396 555 620 670 745 800 910
C Travel 76 101 110 170 220 270 320 365 437 460 539
H 470 660 762 890 1103 1450 1680 1867 2037 2223 2300
H1 570 760 880 1020 1203 1550 1772 1919 2139 2432 2599
Weight RF (Slab) Kg 80 128 195 355 545 925 1165 1575 1850 2425 3500
Weight BW (Slab) Kg 68 120 155 300 405 810 1110 1352 1655 1885 2950

Hydraulic, pneumatic or electric actuation on request VITAS reserves the right to change design without notice
4
 Throught Conduit Gate Valves Slab and Expanding
Class ANSI 900 - Full Bore ØV
size inch 3 4 6 8 10 12 14 16 18 20 24
A 76 102 152 203 254 305 324 375 425 473 572
D 222 286 380 420 590 685 765 850 950 1060 1190
C Travel 120 146 208 225 305 372 408 478 520 568 657
H 725 800 1070 925 1235 1220 1480 1650 2020 2370 2945
H1 - - - - 1740 1790 2090 2330 2740 3140 3850
L BW-RF 381 457 610 737 838 965 1029 1130 1219 1321 1549
L RTJ 384 460 613 740 841 968 1038 1140 1232 1334 1568
V 500 800 1100 1100 - - - - - - -
V1 - - - - 600 600 600 600 800 800 800
Weight RF (Slab) Kg 160 290 530 970 1300 2000 2600 3200 4000 5100 9450

H+C OPEN
Weight BW (Slab) Kg 145 265 310 620 1190 1810 2370 2880 3320 4250 8120

Class ANSI 900 - Reduced Bore

size inch 3x2 4x3 6x4 8x6 10x8 12x10 14x12 16x14 18x16 20x18 24x20
A 51 76 102 152 203 254 305 337 375 425 473
D 152 222 286 381 465 590 685 765 852 950 1060

H CLOSED
C Travel 85 120 146 208 225 305 372 408 478 520 568
H 495 725 802 1070 1308 1448 1575 1816 1930 2464 2921
H1 610 874 956 1270 1500 1740 1790 2090 2330 2740 3140
Weight RF (Slab) Kg 120 160 250 400 688 1150 1625 2290 2915 3710 5765
Weight BW (Slab) Kg 105 145 180 300 540 971 1270 2020 2570 3384 5160

Class ANSI 1500 - Full Bore

size inch 2 3 4 6 8 10 12 14 16 18 20 22 24
A 51 76 102 146 194 241 289 314 362 407 457 495 534

ØA
D 152 222 286 380 485 610 710 790 890 990 1090 1195 1270
C Travel 85 120 146 196 244 291 355 395 460 500 552 603 647
H 495 725 800 1160 1080 1225 1310 1465 1640 2010 2450 2620 2975
H1 - - - - 1520 1765 1815 2110 2350 2780 3300 3520 3920
L BW-RF 368 470 546 705 832 991 1130 1257 1384 1537 1664 1943 1943

D
L RTJ 371 473 549 711 841 1000 1146 1276 1407 1559 1686 1972 1972
V 400 500 600 800 - - - - - - - - -
V1 - - - - 600 800 800 800 800 800 800 800 800
Weight RF (Slab) Kg 120 250 380 900 1500 2300 3300 4600 5900 7500 10500 14700 17000
Weight BW (Slab) Kg 100 220 340 810 1350 2050 2970 4050 5200 6650 9300 13200 15100

Class ANSI 1500 - Reduced Bore L (RF-BW-RJ)

size inch 3X2 4X3 6X4 8X6 10X8 12X10 14X12 16X14 18X16 20X18 24X20
A 51 76 102 146 194 241 289 318 362 407 457
D 152 222 266 381 483 610 711 787 889 991 1092
C Travel 85 120 146 196 244 291 355 395 460 500 552
H 495 724 802 1160 1380 1520 1650 1885 2010 2540 3000
H1 610 874 956 1320 1520 1785 1814 2110 2350 2780 3300
Weight RF (Slab) Kg 115 211 344 643 1148 1954 2996 4212 5293 6496 8126
Weight BW (Slab) Kg 62 154 256 461 851 1484 2402 3315 4099 4998 6220

Class ANSI 2500 - Full Bore

size inch 2 3 4 6 8 10 12
A 44 64 89 133 181 225 267
D 155 212 255 330 430 480 550
C Travel 82 110 122 170 220 275 320
H 545 710 640 790 950 1170 1435
H1 - - 890 1065 1280 1610 1955
L BW-RF 451 578 673 914 1022 1270 1422
H1 Closed H1+C Open

L RTJ 454 584 683 927 1038 1292 1445

Ø V1

V 400 500 - - - - -
V1 - - 600 600 600 600 800
Weight RF (Slab) Kg 175 365 590 1440 2340 4000 5800
Weight BW (Slab) Kg 130 290 470 1150 1900 3200 4800

Class ANSI 2500 - Reduced Bore

size inch
H

A
D
C Travel
H On request
H1 Center Line
Weight RF (Slab) Kg
Weight BW (Slab) Kg

Hydraulic, pneumatic or electric actuation on request VITAS reserves the right to change design without notice
5
 Throught Conduit Gate Valves
Slab and Expanding API 6A
Design according to API 6A

1 Testing according to API 6A

Marking according to API 6A

Flanges according to API6A

2 Butt Welding Ends according to API 6A

Face to Face according to API 6A

Double block & bleed in closed position

3 Anti blow out stem

Body cavity self reliving on slab gate
Fire safe design (certificate on request)

Rising or no rising stem on request

4 Body relief valve on request

Grease injector on seats on request

PARTS LIST

Item No. Description Qty.

1 Body 1
2 Bonnet 1
4 Seat 2
5 Gate 1
5a Segment 1
6 Stem 1
8 Bonnet seal ring 1
12 Packing set 1
13 Gland 1
21 Bearing 2
22 Grease fitting 1
25 Handwheel 1
26 Handwheel nut 1
27 Gate guide 2
35 Bonnet studs 8
36 Bonnet nuts 8
37 Body grease fitting 2
49 Packing injector 1
83 Gate spring 2
136 Seat “O”-Ring 2
140 Bearing spacer sleeve 1
141 Bearing retainer nut 1

Hydraulic, pneumatic or electric actuation on request VITAS reserves the right to change design without notice
6
 Gate Valves
API 6A - 2000, 3000, 5000, 10000 & 15000 PSI
2000 FLANGED END DIMENSIONS
Weight
Size (Inch) øA H LRJ B øV
RJ(Kg)
2” 1/16 52,3 485 295,1 133 254
59
2,06” 19,1” 11,62” 5,25” 10”
9 65 514 333,2 155 330
2” /16 2,56” 20,25” 13,12” 6,1” 13”
80
1 79,2 584 358,6 190,5 406
3” /8 3,12” 23” 14,12” 7,5” 16”
111
1 103,1 676 434,8 235 406
4” /16 4,06” 26,6” 17,12” 9,25” 16”
164
1 130.2 730 562 285 508
5” /8 5.12” 28.7” 22.12” 11.2” 20”
270
1 179.3 880 664 390 508
7” /16 7.06” 34.6” 26.12” 15.3” 20”
450

3000 FLANGED END DIMENSIONS

Weight
Size (Inch) øA H LRJ B øV
RJ(Kg)
2” 1/16 52.3 498 371.3 150 330
82
2.06” 19.6” 14.62” 5.5” 13”
9 65 524 422.1 165 406
2” /16 2.56” 20.6” 16.62 6.5” 16”
115
1 79.2 584 434.8 190.5 406
3” /8 3.12” 23” 17.12” 7.5” 16”
127
1 103.1 676 511 235 508
4” /16 4.06” 26.6” 20.12” 9.25” 20”
236
1 130.2 730 613 290 508
5” /8 5.12” 28.7” 24.12” 11.4” 20”
290
1 179.3 880 714 400 610
7” /16 7.06” 34.6” 28.12” 15,74” 24”
480

5000 FLANGED END DIMENSIONS

Weight
Size (Inch) øA H LRJ B øV
RJ(Kg)
1
2” /16 52.3
2.06”
498
19.6”
371.3
14.62”
140
5.5”
330
13”
82
9 65 524 422.1 165 406
2” /16 2.56” 20.6” 16.62 6.5” 16”
115
1 79.2 584 473 197 406
3” /8 3.12” 23” 18.62” 7.75” 16”
145
1 103.1 676 549.1 241 508
4” /16 4.06” 26.6” 21.62” 9.5” 20”
236
1
5” /8 * 130.2 685 727 315 610
520
5.12” 31.3” 28.62” 12.2” 24”

7” /161 * 179.3 980 813 400 760

1430
7.06” 38.6” 32” 15.75” 30”
10000 FLANGED END DIMENSIONS
Weight
Size (Inch) øA** H LRJ B øV
RJ(Kg)
1” 13/16 45.97 490 464 145 400
125 15000 FLANGED END DIMENSIONS
1.81” 19.3” 18.25” 5.71” 15.7” Weight
Size (Inch) øA** H LRJ B øV
2” 1/16
52.3 415 521 175 400 RJ(Kg)
210
2.06” 16.3” 20.5” 6.9” 15.7”
1” 13/16 45.97 520 457 160 508
200
2” 9/16
65 690 565 230 500
230 1.81” 20.5“ 18“ 6.3“ 20”
2.56” 27.16 22.25” 9” 19.9”
1 52.3 540 483 170 508
3” 1/16 * 77.7 1015 619 270 600
380
2” /16 220
2.06” 21.25“ 19“ 6.7“ 20”
3.06” 40” 24.38” 10.6” 23.6”
* 2” /169 * 65 620 533 190 610
4” 1/16 350
103.1 1015 670 270 600
660 2.56” 24.4“ 21“ 7.5“ 24”
4.06” 40” 26.38” 10.6” 23.6”
* 3” /161 * 77.7 700 598 260 610
5” 1/8 750
130 1145 737 360 600
1030 3.06” 27.6“ 23.56“ 10.2“ 24”
5.12” 45” 29” 14.17” 23.6”
* 4” /161 * 103.1 840 737 350 610
7” 1/16 1100
179.3 1250 889 525 750
2060 4.06” 33.1“ 29“ 13.8“ 24”
7.06” 49.2” 35” 20.7” 29.5”

9” * 228.6 1170 1200 615 750

3300
9” 55.9” 47.27” 24.2” 29.5” * With Epicyclic or Angle Reduction Gear
13” /8 5 * 285.8 1757 1181 720 750
7200 ** Bore A can be supply at customer request
11.25” 69.2 46.5” 28.3” 26.5”
Hydraulic, pneumatic or electric actuation at request

Hydraulic, pneumatic or electric actuation on request VITAS reserves the right to change design without notice
7
 Gate Valves Expanding
API 6A - 2000, 3000, 5000, 10000 & 15000 PSI
2000 FLANGED END DIMENSIONS
Weight
Size (Inch) øA H LRJ B øV
RJ(Kg)
2” 1/16 52,3
2,06”
485
19,1”
295,1
11,62”
133
5,25”
254
10”
59
9 65 514 333,2 155 330
2” /16 2,56” 20,25” 13,12” 6,1” 13”
80
1 79,2 584 358,6 190,5 406
3” /8 3,12” 23” 14,12” 7,5” 16”
111
1 103,1 676 434,8 235 406
4” /16 4,06” 26,6” 17,12” 9,25” 16”
164
1 130.2 730 562 285 508
5” /8 5.12” 28.7” 22.12” 11.2” 20”
270
1 179.3 880 664 390 508
7” /16 7.06” 34.6” 26.12” 15.3” 20”
450

3000 FLANGED END DIMENSIONS

Weight
Size (Inch) øA H LRJ B øV
RJ(Kg)
2” 1/16 52.3 498 371.3 150 330
82
2.06” 19.6” 14.62” 5.5” 13”
9 65 524 422.1 165 406
2” /16 2.56” 20.6” 16.62 6.5” 16”
115
1 79.2 584 434.8 190.5 406
3” /8 3.12” 23” 17.12” 7.5” 16”
127
1 103.1 676 511 235 508
4” /16 4.06” 26.6” 20.12” 9.25” 20”
236
1 130.2 730 613 290 508
5” /8 5.12” 28.7” 24.12” 11.4” 20”
290
1 179.3 880 714 400 610
7” /16 7.06” 34.6” 28.12” 15,74” 24”
480

5000 FLANGED END DIMENSIONS

Weight
Size (Inch) øA H LRJ B øV
RJ(Kg)
2” 1/16 52.3
2.06”
498
19.6”
371.3
14.62”
140
5.5”
330
13”
82
9 65 524 422.1 165 406
2” /16 2.56” 20.6” 16.62 6.5” 16”
115
1 79.2 584 473 197 406
3” /8 3.12” 23” 18.62” 7.75” 16”
145
1 103.1 676 549.1 241 508
4” /16 4.06” 26.6” 21.62” 9.5” 20”
254
1
5” /8 * 130.2 685 727 315 610
550
5.12” 31.3” 28.62” 12.2” 24”

7” /161 * 179.3 980 813 400 760

1480
7.06” 38.6” 32” 15.75” 30”
10000 FLANGED END DIMENSIONS
Weight
Size (Inch) øA** H LRJ B øV
RJ(Kg)
1”
13
/16 45.97 490 464 145 400
125 15000 FLANGED END DIMENSIONS
1.81” 19.3” 18.25” 5.71” 15.7” Weight
Size (Inch) øA** H LRJ B øV
2” 1/16
52.3 415 521 175 400 RJ(Kg)
210
2.06” 16.3” 20.5” 6.9” 15.7”
1” 13/16 45.97 520 457 160 508
200
2” 9/16
65 690 565 230 500
230 1.81” 20.5“ 18“ 6.3“ 20”
2.56” 27.16 22.25” 9” 19.9”
2” 1/16
52.3 540 483 170 508
3” 1/16 * 77.7 1015 619 270 600 220
380 2.06” 21.25“ 19“ 6.7“ 20”
3.06” 40” 24.38” 10.6” 23.6”
2” /169 * 65 620 533 190 610
4” 1/16 * 350
103.1 1015 670 270 600
660 2.56” 24.4“ 21“ 7.5“ 24”
4.06” 40” 26.38” 10.6” 23.6”
1 * 130 1145 737 360 600 3” /161 * 77.7 700 598 260 610
750
5” /8 5.12” 45” 29” 14.17” 23.6”
1030 3.06” 27.6“ 23.56“ 10.2“ 24”

1 * 179.3 1250 889 525 750 4” /161 * 103.1 840 737 350 610
1100
7” /16 7.06” 49.2” 35” 20.7” 29.5”
2060 4.06” 33.1“ 29“ 13.8“ 24”

* 228.6 1170 1200 615 750

9” 9” 55.9” 47.27” 24.2” 29.5”
3300
* With Epicyclic or Angle Reduction Gear
5 * 285.8 1757 1181 720 750
13” /8 11.25” 69.2 46.5” 28.3” 26.5”
7200 ** Bore A can be supply at customer request
Hydraulic, pneumatic or electric actuation at request

Hydraulic, pneumatic or electric actuation on request VITAS reserves the right to change design without notice
8
Gate Valves Expanding
API 6A - 2000, 3000, 5000, 10000 & 15000 PSI
2000 THREADED END DIMENSIONS
Weight
Size (Inch) øA H LTHR B øV
THR(Kg)
2” 1/16 52,3
2,06”
485
19,1”
235
9.25”
133
5,25”
254
10”
46
9 65 514 260.3 155 330
2” /16 2,56” 20,25” 10.25” 6,1” 13”
64
1 79,2 584 289 190,5 406
3” /8 3,12” 23” 11.37” 7,5” 16”
94
1 103,1 676 330.2 235 406
4” /16 4,06” 26,6” 13” 9,25” 16”
128
1 130.2 730 562 285 508
5” /8 5.12” 28.7” 22.12” 11.2” 20”
220
1 179.3 880 664 390 508
7” /16 7.06” 34.6” 26.12” 15.3” 20”
360

3000 THREADED END DIMENSIONS

Weight
Size (Inch) øA H LTHR B øV
THR(Kg)
2” 1/16 52.3
2.06”
498
19.6”
244.5
9.62”
140
5.5”
330
13”
56
9 65 524 260.3 165 406
2” /16 2.56” 20.6” 10.25” 6.5” 16”
80
1 79.2 584 289 190.5 406
3” /8 3.12” 23” 11.37” 7.5” 16”
104
1 103.1 676 330.2 235 508
4” /16 4.06” 26.6” 13” 9.25” 20”
191
1 130.2 730 - 290 508
5” /8 5.12” 28.7” - 11.4” 20”
240
1 179.3 880 - 400 610
7” /16 7.06” 34.6” - 15,74” 24”
440

5000 THREADED END DIMENSIONS

Weight
Size (Inch) øA H LTHR B øV
THR(Kg)
2” 1/16 52.3
2.06”
498
19.6”
244.5
9.62”
140
5.5”
330
13”
56
9 65 524 260.3 165 406
2” /16 2.56” 20.6” 10.25” 6.5” 16”
80
1 79.2 584 289 190.5 406
3” /8 3.12” 23” 11.37” 7.5” 16”
104
1 103.1 676 330.2 235 508
4” /16 4.06” 26.6” 13” 9.25” 20”
191
1 * 130.2 685 - 315 610
5” /8 5.12” 31.3” - 12.2” 24”
440
1 * 179.3 980 - 400 760
7” /16 7.06” 38.6” - 15.75” 30”
1200
10000 THREADED END DIMENSIONS
Weight
Size (Inch) øA** H LTHR B øV
(Kg)
THR

1”
13
/16 45.97 490 - 145 400
125 15000 FLANGED END DIMENSIONS
1.81” 19.3” - 5.71” 15.7”
Weight
1 52.3 415 - 175 400 Size (Inch) øA** H LTHR B øV
2” /16 2.06” 16.3” - 6.9” 15.7”
125 THR(Kg)
1” 13/16 45.97 520 - 160 508
160
2” 9/16
65 690 - 230 500
140 1.81” 20.5“ - 6.3“ 20”
2.56” 27.16 - 9” 19.9”
2” 1/16
52.3 540 - 170 508
3” 1/16 * 180
77.7 1015 - 270 600
230 2.06” 21.25“ - 6.7“ 20”
3.06” 40” - 10.6” 23.6”
2” /169 * 65 620 - 190 610
4” 1/16 * 103.1 1015 - 270 600 280
460 2.56” 24.4“ - 7.5“ 24”
4.06” 40” - 10.6” 23.6”
3” /161 * 77.7 700 - 260 610
5” 1/8 * 130 1145 - 360 600 600
830 3.06” 27.6“ - 10.2“ 24”
5.12” 45” - 14.17” 23.6”
4” /161 * 103.1 840 - 350 610
7” 1/16 * 179.3 1250 - 525 750 900
1650 4.06” 33.1“ - 13.8“ 24”
7.06” 49.2” - 20.7” 29.5”
* 228.6 1170 - 615 750
9” 9” 55.9” - 24.2” 29.5”
2650
* With Epicyclic or Angle Reduction Gear
5 * 285.8 1757 - 720 750
13” /8 11.25” 69.2 - 28.3” 26.5”
5750 ** Bore A can be supply at customer request
Hydraulic, pneumatic or electric actuation at request

Hydraulic, pneumatic or electric actuation on request VITAS reserves the right to change design without notice
9
Trim Explanation for Vitas Gate Valves
VITAS Trim API Spec. 6A
DESCRIPTION AND SERVICE TEMPERATURE
Code Material Class
B-1 AA STANDARD TRIM
For essentially no corrosive liquids or gases. Typical examples are crude and refined oils,
natural or refined gases and processed hydrocarbons. Typical uses are wellheads,
manifolds, flow lines and other similar installations requiring a through conduit valve. The
temperature limitations are 0° to 250°F, (-18° to 121°C).
B-2 BB STAINLESS TRIM
For substantially the same service as B-1 but where the corrosion resistance of 13 Chrome
Stainless Steel internal parts are desirable. Also usable for mildly corrosive fluids and gases
when limited corrosion of the internal body surfaces can be tolerated. The temperature
limitations are 0° to 250°F, (-18° to 121°C). Recommended when partial pressure of CO2 is
greater than 30.
B-3 CC FULL STAINLESS TRIM
For only liquid or gaseous product for which the resistance of the 13 Chrome Stainless is
adequate. Also used where the resistance of Stainless Steel is desirable from the standpoint
of product purity. The temperature limitations are 0° to 250°F (-18° to 121°C).
Recommended when partial pressure of CO2 is greater than 30.
B-4 EE SOUR GAS AND OIL
Primarily for sour gas and oil where resistance to Hydrogen Sulphide embrittlement is
required. Also suitable for other chemicals, products or hydrocarbons when H2S is present.
May be used when CO2 is present in smaller amount than H2S. The temperature limitations
are 0° to 250°F (-18° to 121°C).
B-6 FF STAINLESS SOUR GAS AND OIL TRIM
Primarily for sour gas and oil when the CO2 content exceeds the H2S content. It is intended
to provide resistance to the metal loss type of corrosion usually associated with CO2 plus
resistance to Hydrogen Sulphide embrittlement. The temperature limitations are 0° to 250°F
(18° to 121°C).
B-1.1 AA LOW TEMPERATURE-STANDARD TRIM-GENERAL OILFIELD
For essentially no corrosive liquids or gases. Typical examples are crude and refined oils,
natural or refined gases and processed hydrocarbons. Typical uses are wellheads,
manifolds, flow lines and other similar installations requiring a through conduit valve. The
temperature limitations are -50° to 180°F (-46° to 82°C).
B-4.1 BB LOW TEMPERATURE-SOUR GAS AND OIL
Primarily for sour gas and oil where resistance to Hydrogen Sulphide embrittlement is
required. Also suitable for other chemicals, products or hydrocarbons vhen H2S is present.
May be used when CO2 is present in smaller amount than H2S. The temperature limitations
are -50° to 180°F (-46 to 82°C).

Hydraulic, pneumatic or electric actuation on request VITAS reserves the right to change design without notice
10
Materials for Vitas Gate Valves

Body Bonnet Gate Studs

Trim Gate Packings
Services & Seal & Seats Stem &
Code Spring Set V-Rings
Bonnet Ring Segment Nuts

General API A193-B7

4130 4130 4130 Inconel
Oil Field B-1 Type 2 or 3 C 1020
(2) (2) (2) 600
Teflon
Oil & Gas Steel A194-2H

General Service 410 SS 410 SS 410 SS

API A193-B7
Inconel
Slight Corrosion B-2 Type 2 or 3 C1020
EN55 EN55 (2) 600
Teflon
CO2 Steel A194-2H
(1) (1)

Corrosive 410 SS 410 SS 17-4PH

ASTM A217 A193-B7
Service SS Aged Inconel Teflon +
B-3 CA-15 AISI 316
EN55 EN55 Max. Rc33 600 25% Glass
High CO2 no 410 SS A194-2H
H2S (1) (1) (2)

Sour Gas & Oil API 17-4PH 17-4PH 17-4PH

A193-B7M
H2S Type 2 or 3 SS Aged SS Aged SS Aged Inconel Teflon +
B-4 Steel
AISI 316
Max. Rc33 Max. Rc33 Max. Rc33 X750 25% Glass
Meets NACE A194-2HM
MR 0175-99 Max. Rc22 (2) (3) (2) (3) (2)

Sour Gas & Oil ASTM A217 17-4PH 17-4PH 17-4PH

A193-B7M
H2S + CO2 CA-15 SS Aged SS Aged SS Aged Inconel Teflon +
B-6 410 SS
AISI 316
Max. Rc33 Max. Rc33 Max. Rc33 X750 25% Glass
Meets NACE A194-2HM
MR 0175-99 Max. Rc22 (2) (3) (2) (3) (2)

API
General Type 2 or 3
A320-L7
Oil Field Steel 4130 4130 4130 Inconel Teflon +
B-1.1 Quenched & AISI 316 (2) (2) (2) 600 40% Glass
Oil & Gas A194-2H
To –50°F Tempered
Impact Tested

Sour Gas & Oil API

H2S + CO2 Type 2 or 3 17-4PH 17-4PH 17-4PH
A320-L7M
Steel SS Aged SS Aged SS Aged Inconel Teflon +
To –50°F B-4.1 Quenched & AISI 316 Max. Rc33 Max. Rc33 Max. Rc33 X750 40% Glass
Meets NACE A194-Gr.4
Tempered (2) (3) (2) (3) (2)
MR 0175-99 Impact Tested

(1) - Electroless Nickel Plated

(2) - MoS2 coating
(3) - Hard faced as required

Hydraulic, pneumatic or electric actuation on request VITAS reserves the right to change design without notice
11
Full-Bore-Through Conduit In-Line Reparability Low Operating Torque
Give a full round bore through the valve, Vitas plastic stem packing can Upper and lower roller-thrust bearings
no smaller than that of the pipe. be added to the packing box while on the stem are isolated from pressures, thus
Minimizes pressure drop and turbulence the valve is under pressure. making operation easier.
is eliminated. Internal parts can be replaced
without removing the valve from the line. Stem & Gate coating
Parallel-Expanding-Gates
A molybdenum disulphide film on the
Protected, Long-Life Seats
Provide an extraordinarily high seating stem and gate reduces the friction
force against both the upstream and Seats are fuilly protected from coefficient and assures
downstream seats. flow in both open and closed a lubrication for the valve lifetime.
positions, allowing exceptionally
long service.

improved packing box

Fatigue resistant stem design

Precision-machined,
parallel-expanding gates

Seat faces fully protected

from flow in both
open and closed positions

Full-bore-through conduit

Hydraulic, pneumatic or electric actuation on request VITAS reserves the right to change design without notice

Hydraulic, pneumatic or electric actuation on request VITAS reserves the right to change design without notice
12
 Throught Conduit Gate Valves
Fabricated Square and Round Body
1
Design construction:
API 6D - ANSI B16.34 - Testing according to API 6D
Marking according to MSS SP25 - Fire safe design according to API 6FA-BS 6755 part2

Outside Screw and Yoke (OS&Y) - Floating seats with grease injector design ≥ 8”

2 Back seat design - Special packing with lantern ring and double ball grease injector
Electroless nickel plated slab gate and seat
Vent and Drain valve
Full stellited seats and slab on request

3 Body Bonnet seal soft gasket (plus reinforced graphite if required)

Special design reinforced graphite for Class 150lbs
Valves are Full Bore or Reduced Bore construction
Flanges according ANSI B16.5 for size 2” to 24”

4 to ASME B 16.47 for size > 26”

Butt Welding Ends according to ANSI B16.25
Face to face according to API 6D
Suggested bevel gear operator for:

5 DN ≥ 20” Class 150 - DN ≥ 14” Class 300

DN ≥ 8” Class 600 - DN ≥ 6” Class 900
DN ≥ 4” Class 1500

6 For pressure and temperature

rating see material application

Hydraulic, pneumatic or electric actuation on request VITAS reserves the right to change design without notice
13
 Throught Conduit Gate Valves
Fabricated Square and Round Body
Class ANSI 150
size inch 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 40 42 46 48
øA 102 152 203 254 305 337 387 438 489 540 591 635 686 737 781 832 876 978 1022 1118 1168
E 350 420 440 530 630 650 730 800 898 985 1046 1135 1250 1275 1342 1438 1535 1645 1710 1890 2075
D 282 342 422 496 583 620 712 782 875 963 1053 1142 1225 1310 1380 1455 1535 1685 1775 1935 2010
H1 - - - - - - - - 1656 1846 2003 2135 2246 2386 2554 2720 2820 3110 3276 3680 3720
C Travel 138 182 234 284 342 369 428 484 532 588 643 696 751 805 842 901 946 1042 1098 1185 1230
H Closed 765 920 1140 1360 1540 1620 1850 2020 2390 2630 2850 3030 3200 3390 3650 3870 4035 4400 4624 5115 5200
L BW 305 403 419 457 502 572 610 660 711 762 813 864 914 914 965 1016 1016 1118 1168 1270 1321
L RF 229 267 292 330 356 381 406 432 457 508 508 559 610 650 711 762 800 914 965 1118 1118
øV 300 400 400 500 500 750 750 750 - - - - - - - - - - - - -
øV1 - - - - - - - - 600 750 750 750 750 750 750 750 750 750 750 750 750
Weight BW (kg) 86 184 320 445 530 800 910 1340 1625 1985 2345 2710 3160 3620 4160 4700 5120 6320 6950 8270 8930
Weight RF (kg) 104 210 360 490 600 890 1015 1490 1805 2205 2605 3010 3510 4020 4660 5220 5690 7020 7720 9170 9920

Class ANSI 300

size inch 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 40 42 46 48
øA 102 152 203 254 305 337 387 438 489 540 591 635 686 737 781 832 876 978 1022 1118 1168
E 350 420 440 600 660 770 860 830 1060 1010 1250 1140 1030 1100 1170 1230 1285 1380 1520 1660 1740
D 282 342 422 496 583 620 712 782 875 963 1053 1142 1225 1310 1380 1455 1535 1685 1775 1935 2010
H1 - - - - - 1182 1334 1540 1656 1846 2003 2135 2246 2386 2554 2720 2820 3110 3276 3680 3720
C Travel 138 182 234 284 342 369 428 484 532 588 643 696 751 805 842 901 946 1042 1098 1185 1230
H Closed 775 926 1142 1361 1554 1662 1882 2052 2341 2505 2715 2945 3136 3332 3525 3718 3901 4341 4505 4898 5084
L BW-RF 305 403 419 457 502 762 838 914 991 1092 1143 1245 1346 1397 1524 1626 1727 1930 2007 2286 2286
L RJ 321 419 435 473 518 778 854 930 1010 1114 1165 1270 1372 1422 1553 1654 1756 1960 2035 2314 2314
øV 400 500 750 750 750 - - - - - - - - - - - - - - - -
øV1 - - - - - 600 750 750 750 750 750 750 750 750 750 750 750 750 750 750 750
Weight BW (kg) 92 135 225 369 531 702 990 1350 1710 2160 2565 3060 3780 4500 5274 6030 7020 7920 9464 11340 14500
Weight RF (kg) 102 150 250 410 590 780 1100 1500 1900 2400 2850 3400 4200 5000 5860 6700 7800 8800 10515 12600 16100

ØV
ØV1

H+C=OPEN
H+C=OPEN

H CLOSE
H CLOSE

H1
ØA

L (BW-RF-RJ) E

Hydraulic, pneumatic or electric actuation on request VITAS reserves the right to change design without notice
14
 Throught Conduit Gate Valves
Fabricated Square and Round Body
Class ANSI 400
size inch 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 40 42 46 48 52 54 56 60
øA 102 152 203 254 305 337 387 438 489 540 591 635 686 737 781 832 876 978 1022 1118 1168 1267 1314 1365 1461
E 335 420 530 600 670 780 850 970 1020 1140 1170 1330 1420 1490 1600 1690 1795 1980 2010 2100 2150 2400 2600 2700 2850
D 282 342 422 496 583 620 712 782 875 963 1053 1142 1225 1310 1380 1455 1535 1685 1775 1935 2010 2190 2250 2330 2500
H1 532 660 828 969 1050 1182 1334 1540 1656 1837 2003 2135 2246 2386 2554 2720 2820 3110 3276 3680 3720 4070 4150 4310 4600
C Travel 138 182 234 284 342 369 428 484 532 588 643 696 751 805 842 901 946 1042 1098 1185 1230 1320 1370 1420 1520
H Closed 780 945 1170 1370 1570 1665 1895 2070 2345 2590 2780 2990 3140 3370 3580 3790 3980 4390 4549 5045 5260 5610 5740 5960 6360
L BW-RF 406 495 597 673 762 826 902 978 1054 1143 1232 1308 1397 1524 1651 1778 1880 2083 2185 2426 2540 2210 2260 2311 2350
L RJ 410 498 600 676 765 829 905 981 1060 1153 1241 1321 1410 1537 1667 1794 1895 - - - - - - - -
øV 400 500 800 - - - - - - - - - - - - - - - - - - - - - -
øV1 - - - 600 600 600 750 750 600 600 750 750 750 750 750 750 750 750 750 750 750 750 750 750 750
Weight BW (kg) 175 276 463 648 840 1085 1622 2074 2225 3330 4031 4830 5535 6543 7645 8750 9950 13352 14560 18475 20500 24000 26500 29800 33100
Weight RF (kg) 194 306 482 715 930 1200 1805 2303 2470 3695 4475 5360 6150 7266 8490 9715 11050 14828 16165 20580 22770 27000 29500 33200 39400

Class ANSI 600

size inch 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 40 42 46 48 52 54 56 60
øA 102 152 203 254 305 337 387 438 489 540 591 635 686 737 781 832 876 978 1022 1118 1168 1267 1314 1365 1461
E 320 390 430 600 660 770 840 870 950 1010 1140 1280 1340 1400 1515 1520 1580 1780 1850 1960 2180 2320 2450 2540 2810
D 282 342 422 496 583 620 712 782 875 963 1053 1142 1225 1310 1380 1455 1535 1685 1775 1935 2010 2120 2250 2350 2500
H1 - - - 969 1050 1182 1334 1540 1656 1837 2003 2135 2246 2386 2554 2720 2820 3110 3276 3680 3720 3980 4150 4310 4600
C Travel 138 182 234 284 342 369 428 484 532 588 643 696 751 805 842 901 946 1042 1098 1185 1230 1318 1370 1420 1520
H Closed 780 950 1175 1385 1585 1680 1910 2125 2355 2630 2815 3040 3190 3395 3620 3830 4035 4435 4635 5045 5260 5510 5740 5960 6360
L BW-RF 432 559 660 787 838 889 991 1092 1194 1295 1397 1448 1549 1651 1778 1930 2083 2388 2438 2489 2540 2667 2743 2794 2845
L RJ 435 562 664 791 841 892 994 1095 1200 1305 1407 1461 1562 1664 1794 1946 2099 - - - - - - - -
øV 400 500 800 - - - - - - - - - - - - - - - - - - - - - -
øV1 - - - 600 600 750 750 750 750 750 750 750 750 750 750 750 750 750 750 750 750 750 750 750 750
Weight BW (kg) 92 276 318 532 816 1142 1226 2036 2612 3335 4065 4420 5955 6756 7840 9040 10400 11800 15350 17200 21200 23900 29000 31800 35000
Weight RF (kg) 102 304 386 513 907 1205 1365 1260 2920 3715 4510 5040 6625 7515 8720 10050 11550 13120 17100 19050 23600 26600 - - -

EXCELLENT DOUBLE BLOCK AND BLEED CAPABILITY

AUTOMATIC RELIEF OF EXCESS BODY PRESSURE

➋ ➌
With equal pressure throughout the valve and gate in closed position. An initial seal (1) is formed with the raised TFE ring on
the faces of the seats. The seat inserts clean both sides of the gate each time the valve is opened or closed. Powerful springs assure
sealing independent of high pressure, low pressure, or vacuum providing a constant contact during any type of operation.

➋ As line pressure (2) is applied to the valve, it acts on the gate,

forcing it against the seat ring on the downstream seat, a seal is
formed (a the beginning a TFE-to-metal seal, then metal-to-
metal). The O-ring (3) prevents any downsteal flow at this point.
An upstream seal is provided when body pressure is bled off.
This is caused by the force of line pressure acting against the
upstream seat (4) moving the seat against the gate and providing a
tight TFE-to-metal seal at this point. At the same time, the O-ring
(5) forms a tight seal with the seat and body.

➌ Valve automatically relieves itself of excessive body pressu-

re. When body pressure exceeds line pressure, from such causes
as thermal expansion, the upstream seat is forced back into its
recess and the excess pressure in the body is bled between the
seat and the gate into the line.

Hydraulic, pneumatic or electric actuation on request VITAS reserves the right to change design without notice
15
 Throught Conduit Gate Valves
Fabricated Square and Round Body
Class ANSI 900 ØV
size inch 4 6 8 10 12 14 16 18 20 22 24 26 30 32
øA 102 152 203 254 305 324 375 425 473 524 571 619 714 762
E 450 540 580 590 690 830 900 960 1020 1230 1280 1340 1720 1860
D 290 352 442 514 588 651 735 821 894 998 1080 1240 1430 1560
H1 - 671 824 975 1149 1240 1388 1567 1722 1878 2040 2385 2810 3080
C Travel 130 202 248 294 350 362 415 465 512 568 615 654 758 804
H Closed 800 933 1177 1395 1643 1784 1971 2234 2440 2698 2905 3860 4060 4220
L BW-RF 457 610 737 838 965 1029 1130 1219 1321 1423 1549 1727 1727 2235

H+C=OPEN
L RJ 460 613 740 841 968 1038 1140 1232 1334 - 1568 - - -
øV 500 - - - - - - - - - - - - -
øV1 - 600 750 750 750 750 750 750 750 750 750 750 750 750
Weight BW (kg) 475 585 775 1060 1470 1960 2580 3320 4295 5500 6850 8270 12000 15000
Weight RF (kg) 500 615 820 1120 1500 2030 2725 3470 4540 5800 7250 8710 - -

H CLOSE
Class ANSI 1500
size inch 4 6 8 10 12 14 16 18 20 22 24
øA 102 146 194 241 289 315 362 407 457 495 534
E 450 550 640 740 830 930 1030 1140 1210 1320 1420
D 280 370 440 530 600 690 770 830 920 1010 1100
H1 570 720 870 1015 1170 1350 1480 1610 1755 1920 2100

ØA
C Travel 137 181 234 281 335 368 414 453 510 547 586
H Closed 815 1050 1260 1480 1700 1935 2155 2310 2530 2815 3065
L BW-RF 546 705 832 991 1130 1257 1384 1537 1664 1943 1943
L RJ 549 711 841 1000 1146 1276 1407 1559 1686 1971 1971
øV1 600 750 750 750 750 750 750 750 750 750 750
Weight BW (kg) 510 650 860 1525 2035 2305 3810 4905 6250 7600 8475

D
Weight RF (kg) 536 685 905 1605 2145 2425 4010 5130 6580 8000 8890

L (BW-RF-RJ)

ØV1

H+C=OPEN
H CLOSE
H1

Hydraulic, pneumatic or electric actuation on request VITAS reserves the right to change design without notice
16
 Gate Valves Pressure Seal
Design construction.

1 API 600 - ANSI B16.34

Testing according to API 598 - BS 6755
Marking according to MMS SP25

2
Outside Screw and Yoke (OS&Y)
Self aligning packing gland in two parts
Welded seats - Solid or flexible wedge

Flanges according to ANSI B 16.5 for DN 2” to 24”

3 to ASME B 16.47 for DN >26”

Butt Welding Ends according to ANSI B16.25
Face to face according to ANSI B 16.10

4
Double ball bearing are assembled on:
DN >6” for Classes 600 and 900
DN >4” for Classes 1500 and 2500

Suggested bevel gear operator for

5 DN > 8’’ Classes 600 and 900

DN > 6’’ Class 1500
DN > 3’’ Class 2500

6
Over pressure safety valve on request
Lantern ring on request
For pressure temperature rating see technical data

7 Special design of forged material

available for 6”/1500 and larger

Hydraulic, pneumatic or electric actuation on request VITAS reserves the right to change design without notice
17
 Gate Valves Pressure Seal
Class ANSI 600
size inch 2 3 4 6 8 10 12 14 16 18 20 24 30 36
mm 50 80 100 150 200 250 300 350 400 450 500 600 750 900
A 51 76 102 152 200 248 299 327 375 419 464 559 695 876
C Travel 68 96,5 130 175 234 276 330 350 417 460 506 607 775 920
H Closed 464 518 672 843 1125 1362 1380 1490 1520 1774 1920 2200 2800 3400
H1 - - - - 1480 1500- 1560 1805 1840 2400 2520 2850 3650 4400
L BW 178 254 305 457 584 711 813 889 991 1092 1194 1397 1651 2083
L RF 292 356 432 559 660 787 838 889 991 1092 1194 1397 1651 2083
V 200 300 400 600 - - - - - - - - - -
V1 - - - - 600 600 600 600 600 600 600 600 800 800
Weight RF kg 40 61 115 230 460 550 930 1080 1630 2350 2470 3400 * *
Weight BW kg 36 53 94 165 390 430 750 890 1436 2052 2160 2710 * 10120
Figure 6P 6P 6P 6P 6P 6P 6P 6P 6P 6P 6P 6P 6P 6P
102 103 104 106 108 110 112 114 116 118 120 124 130 136

Class ANSI 900

size inch
3 4 6 8 10 12 14 16 18 20 22 24 28
mm 80 100 150 200 250 300 350 400 450 500 550 600 700
A 73 99 146 191 238 283 31 356 400 445 460 534 622
C Travel 88 118 167 215 252 306 350 402 428 488 490 594 675
H Closed 564 730 830 1077 1160 1377 1467 1720 1810 1955 2510 2350 3285
H1 - - - 1510 1660 1930 2075 2305 2670 2600 2180 2950 -
L BW 305 356 508 660 787 914 991 1092 1219 1321 1321 1549 1549
L RF 381 457 610 737 838 965 1029 1130 1219 1321 1321 1549 1549
V 400 500 800 - - - - - - - - - -
V1 - - - 600 600 800 600 600 600 600 750 600 800
Weight RF kg 95 151 280 545 870 1210 1720 2410 2780 3450 - * 6900
Weight BW kg 75 118 210 430 700 990 1480 2100 2400 2950 3300 4800 6080
Figure 9P 9P 9P 9P 9P 9P 9P 9P 9P 9P 9P 9P 9P
103 104 106 108 110 112 114 116 118 120 122 124 128

Class ANSI 1500

size inch 2 2.1/2 3 4 5 6 8 10 12 14 16 18 20 24
mm 50 65 80 100 130 150 200 250 300 350 400 450 500 600
A 48 57 70 92 111 137 178 222 263 289 330 350 416 498
C Travel 57 90 90 98 143 143 205 243 310 330 342 400 460 520
H Closed 488 570 570 690 830,7 830 1050 1291 1504 1520 1731 1950 2227 2520
H1 - - - - - 1275 1535 1730 2100 2180 2515 1800 3060 3460
L BW 216 254 305 406 483 559 71 864 991 1067 1194 1346 1473 1943
L RF 368 419 470 546 705 705 832 991 1130 1257 1384 - 1664 1943
V 400 500 500 600 600 - - - - - - - - -
V1 - - - - - 600 600 600 600 800 600 600 600 800
Weight RF kg 63,2 81 98 209 380 450 830 1240 2185 2930 4850 - 7450 9400
Weight BW kg 40 60 87 145 290 309 600 955 1650 2320 3800 - 6300 7810
Figure 15P 15P 15P 15P 15P 15P 15P 15P 15P 15P 15P 15P 15P 15P
102 101 103 104 105 106 108 110 112 114 116 118 120 124
0 V1

Class ANSI 2500

size inch 2 2.1/2 3 4 6 8 10 12 14 16 18 20 24
mm 50 65 80 100 150 200 250 300 350 400 450 500 600
H1 - C

A 38 47,5 57 73 111 146 184 219 242 276 311 343 413
C Travel 58 90 81 96 130 172 214 260 270 314 352 385 450
H Closed 552 570 668 743 1056 1222 1450 1560 1770 1820 1880 2080 2470
H1 - - 920 1230 1465 1645 2140 2490 2710 2310 2480 2650 3180
L BW 279 330 368 457 610 762 914 1041 1178 1245 1397 1524 1676
L RF 451 508 578 673 914 1022 1270 1422 - - - - -
H

V 400 500 - - - - - - - - - - -
V1 - - 300 600 600 600 600 800 800 800 800 800 800
Weight RF kg 98 179 195 335 710 1450 2730 2580 * * * * *
Weight BW kg 61 124 138 223 460 750 2096 1650 3700 * * * *
Figure 25P 25P 25P 25P 25P 25P 25P 25P 25P 25P 25P 25P 25P
102 101 103 104 106 108 110 112 114 116 118 120 124 CENTER LINE

Hydraulic, pneumatic or electric actuation on request VITAS reserves the right to change design without notice
18
 Gate Valves Bolted Bonnet
Design construction.

1 API 600 - BS 1414 - ANSI B16.34

Testing according to API 598 - BS 6755
Marking according to MMS SP25
Outside Screw and Yoke (OS&Y)
Self aligning packing gland in two parts - Soft seats design only on request

2 Spiral-wound gasket for Classes 300 and 600 lbs

Oval ring joint for Classes 900,1500 and 2500 lbs
Special design reinforced grafite gasket for Class 150 lbs
Flanges according to ANSI B 16.5 for size 2” to 24” to ASME B 16.47 for size 1>26”

3 Butt Welding Ends according to ANSI B16.25

Face to face according to ANSI B 16.10
Clamp end only on request

Lantern ring only on request

4 For pressure temperature rating

see technical data

Suggested bevel gear operator for DN >16” Class 150

5 DN >12’’ Class 300

DN > 8’’ Class 600 and 900
DN > 6’’ Class 1500
DN > 3’’ Class 2500

6 Double Yoke Nut bearing are assembled on: DN >14’’ Class 150
DN > 12’’ Class 300
DN > 6’’ Class 600 and 900

Hydraulic, pneumatic or electric actuation on request VITAS reserves the right to change design without notice
19
 Gate Valves Bolted Bonnet
Class ANSI 150
size inch 2 2.1/2 3 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 36 40 42 48 54 60
mm 50 65 80 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 900 1000 1050 1200 1350 1500
A 51 63.5 76 102 152 203 254 305 337 388 438 489 540 591 641 699 737 781 876 978 1029 1168 1315 1461
C Travel 65 76 90 125 150 208 276 351 367 418 454 510 560 610 650 740 760 820 915 1010 1050 1220 1365 1498
H Closed 401 434 445 556 703 921 1065 1174 1330 1445 1630 1830 2036 2130 2285 2635 2592 2940 3300 3510 3820 4064 4400 5100
H1 - - - - - - - - - - 2300 2550 2910 3010 3165 3465 3610 3950 4330 4830 4975 5505 6430 6850
L BW 216 241 283 305 402 419 457 502 572 610 660 711 813 813 864 914 914 965 1016 1168 1397 1270 * *
L RF 178 190 203 229 267 292 330 356 381 406 432 457 508 508 559 610 610 660 711 813 813 864 1016 1270
V 250 300 300 300 400 500 600 600 800 800 - - - - - - - - - - - - - -
V1 - - - - - - - - - - 600 600 600 800 800 800 800 800 800 800 800 800 800 800
Weight RF kg 26 34 38,7 55 95 164 237 343 352 450 671 790 1040 1150 1509 2084 2413 2787 3010 4880 5302 7520 10050 14800
Weight BW kg 23 30 34 48 89 134 241 331 333 445 675 776 1110 1085 * * * * * * * * * V
Figure 1H 1H 1H 1H 1H 1H 1H 1H 1H 1H 1H 1H 1H 1H 1H 1H 1H 1H 1H 1H 1H 1H 1H 1H
102 101 103 104 106 108 110 112 114 116 118 120 122 124 126 128 130 132 136 140 142 148 154 160

Class ANSI 300

size inch 2 2.1/2 3 4 6 8 10 12 14 16 18 20 24 26 28 30 32 34 36 42 46 48
mm 50 65 80 100 150 200 250 300 350 400 450 500 600 650 700 750 800 850 900 1050 1150 1200
A 51 63.5 76 102 152 203 254 305 337 388 438 483 584 635 686 737 781 832 876 1029 1118 1168
C Travel 68 71 93 127 162 234 269 319 350 420 452 530 620 660 720 770 810 880 925 1060 1160 1220
H Closed 401 434 493 594 766 971 1182 1280 1370 1575 1770 1980 2070 2460 2460 2930 2930 3290 3290 3812 4260 4260
H1 - - - - - - - 1855 1915 2285 2460 2860 3150 3285 3285 4010 4104 4410 4470 5300 5860 6040
L BW-RT 216 241 283 305 403 419 457 502 762 838 914 991 1143 1245 1346 1397 1524 1626 1727 1981 2235 2235
V 250 300 300 400 500 600 600 - - - - - - - - - - - - - - -
V1 - - - - - - - 600 600 800 600 800 600 800 800 800 800 800 800 800 800 800
Weight RF kg 30 42,2 56 82 165 273 388 555 740 930 1210 1530 2520 3420 3960 4160 5250 6120 7160 11100 16700 22500
Weight BW kg 23 32 46 65 140 239 333 480 632 835 990 1360 2270 * * * * * * * * *
Figure 3H 3H 3H 3H 3H 3H 3H 3H 3H 3H 3H 3H 3H 3H 3H 3H 3H 3H 3H 3H 3H 3H
102 101 103 104 106 108 110 112 114 116 118 120 124 126 128 130 132 134 136 142 146 148

Class ANSI 600

size inch 2 2.1/2 3 4 6 8 10 12 14 16 18 24 26 28 30 32 36 42
mm 50 65 80 100 150 200 250 300 350 400 450 600 650 700 750 800 900 1050 v
A 51 63.5 76 102 152 200 248 299 327 375 419 559 603 648 737 781 876 978
C Travel 62 78 96 127 170 220 270 330 350 420 470 600 650 685 780 805 930 1020 H
Closed 465 480 590 686 815 1052 1087 1248 1595 1720 1975 2375 2466 2580 3070 3150 3275 3850 H1
- - - - - 1430 1470 1790 2115 2380 2660 3270 3360 3570 4230 4320 4590 5250 L BW-
RF 292 330 356 432 559 600 787 838 889 991 1092 1397 1448 1549 1651 1778 2083 2438 L RTJ
295 333 359 435 562 664 791 841 892 994 1095 1407 1460 1562 1664 1794 2099 2454
V 300 300 400 400 600 - - - - - - - - - - - - -
V1 - - - - - 600 800 600 600 600 600 800 800 800 800 800 800 800
Weight RF kg 44 51 81 136 294 509 760 1035 1440 1787 2430 4620 5120 7420 7914 9150 10400 24100
Weight BW kg 36 43 72 115 255 438 635 920 1310 1510 2160 3920 * * * * * *
Figure 6H 6H 6H 6H 6H 6H 6H 6H 6H 6H 6H 6H 6H 6H 6H 6H 6H 6H
102 101 103 104 106 108 110 112 114 116 118 124 126 128 130 132 136 142
H-C
0 V1

H1 - C

A
H

L
CENTER LINE Flex Wedge Solid Wedge

Hydraulic, pneumatic or electric actuation on request VITAS reserves the right to change design without notice
20
 Gate Valves Bolted Bonnet
Class ANSI 900
V
size inch 3 4 6 8 10 12 14 16 18 20 24
mm 80 100 150 200 250 300 350 400 450 500 600
A 73 99 146 191 238 283 311 356 400 4445 534
C travel 95 120 175 220 260 310 330 395 430 447 580
H Closed 615 760 960 1194 1335 1390 1545 1840 1840 2065 2320
H1 - - - 1550 1710 1980 2090 2390 2560 2963 3366
L BW-RF 381 457 610 737 838 965 1029 1130 1219 1321 1549
L RTJ 384 460 613 740 841 968 1038 1140 1232 1334 1568
V 400 500 800 - - - - - - - -
V1 - - - 800 600 600 600 600 600 600 600
Weight RF kg 116 204 415 766 1050 1520 1760 2627 3200 5500 7350
Weight BW kg 97 178 367 665 915 980 1410 2160 2520 4650 6020
Figure 9R 9R 9R 9R 9R 9R 9R 9R 9R 9R 9R
103 104 106 108 110 112 114 116 118 120 124

H-C
Class ANSI 1500
size inch 2 3 4 6 8 10 12 14 16 20 24 30
mm 50 80 100 150 200 250 300 350 400 500 600 750
A 48 69 92 137 178 222 264 289 330 416 498 686
C Travel 75 97 125 150 215 245 285 330 360 486 520 728 H
Closed 555 655 766 1003 1170 1400 1463 1677 1610 2376 2615 3186
H1 - - - 1370 1550 1800 2010 2159 2380 3300 3490 3688
L BW-RF 368 470 546 705 832 991 1130 1257 1384 1664 1943 2500
L RTJ 371 473 549 711 841 1000 1146 1276 1407 1686 1971 2500
V 400 500 600 - - - - - - - - -
V1 - - - 800 600 800 800 800 800 800 800 800
Weight RF kg 97 178 288 691 1220 1831 2790 4420 5250 10100 18000 25900
Weight BW kg 76 146 254 588 1030 1590 2370 3610 4250 8600 15800 *

A
Figure 15R 15R 15R 15R 15R 15R 15R 15R 15R 15R 15R 15R
102 103 104 106 108 110 112 114 116 120 124 130

L
Flex Wedge Solid Wedge
Class ANSI 2500
size inch 2 3 4 6 8 10 12
mm 50 80 100 150 200 250 300
A 38 57 73 111 146 184 219
C Travel 68 95 97 160 175.5 215 225
H Closed 630 736 765 1140 1380 1690 1950
H1 - 992 1036 1550 2680 2163 2544
L BW-RF 451 578 673 914 1022 1270 1422
L RTJ 454 584 683 927 1038 1292 1445
V 400 - - - - - -
0 V1

V1 - 300 600 600 600 600 800

Weight RF kg 181 334 520 1285 2050 3210 4900
Weight BW kg 140 280 390 990 1610 2370 3740
Figure 25R 25R 25R 25R 25R 25R 25R
H1 - C

102 103 104 106 108 110 112

H

CENTER LINE

Hydraulic, pneumatic or electric actuation on request VITAS reserves the right to change design without notice
21
 Gate Valves Cryogenic
Design construction:

1 API 600 - BS 1873 - BS 6364

Testing according to API 598 - BS 6755
Marking according to MMS SP25
Outside Screw and Yoke (OS&Y)

2 Self aligning gland in two parts

Soft seats design on request
Welded seats - Flexible wedge
Pressure relief hole on wedge
Flanges according to:

3 ANSI B16.5 for size 2” to 24” - ASME B16.47 for size >26”
Butt Welding Ends according to ANSI B16.25
Lantern ring only on request
Suggested bevel gear operator for Gate:

4 DN > 18” Classes 150 - DN > 12” Classes 300

DN > 8” Classes 600 and 900 - DN > 6” Class 1500
DN > 3” Class 2500

Hydraulic, pneumatic or electric actuation on request VITAS reserves the right to change design without notice
22
 Gate Valves Cryogenic
Class ANSI 150 V
size inch 2 3 4 6 8 10 12 14 16 18 20 24 30
mm 50 80 100 150 200 250 300 350 400 450 500 600 750
A 51 76 102 152 203 254 305 337 388 438 489 591 737
C travel 65 90 120 167 223 284 322 367 418 454 510 610 740
Hclosed 641 722 824 934 1099 1235 1420 1630 1745 1930 2130 2430 2892
H1 - - - - - - - - - 2930 3210 3730 4390
L BW 216 283 305 403 419 457 502 572 610 660 711 813 914
L RF 178 203 229 267 292 330 356 381 406 432 457 508 610
V 250 300 300 400 500 600 600 800 800 - - - -
V1 - - - - - - - - - 600 600 800 80
Weight RF kg 31 45 62 103 173 247 355 366 466 689 810 1175 2433
Weight BW kg 28 40 55 97 143 251 343 347 461 693 796 1110 -
Figure 1C 1C 1C 1C 1C 1C 1C 1C 1C 1C 1C 1C 1C
102 103 104 106 108 110 112 114 116 118 120 124 130

H-C
Class ANSI 300
size inch2 3 4 6 8 10 12 14 16 18 20 24
mm 50 80 100 150 200 250 300 350 400 450 500 600
A 51 76 102 152 203 254 305 337 388 432 483 584
C Travel 68 93 127 162 234 269 319 350 420 452 530 620
Hclosed 655 747 848 1020 1225 1436 1590 1680 1885 2020 2230 2380
H1 - - - - - - 2290 2405 2785 2930 3230 3680
L BW-RF 216 283 305 403 419 457 502 762 838 914 991 1143
V 250 300 400 500 600 600 - - - - - -
V1 - - - - - - 600 600 800 600 800 800
Weight RF kg 35 61 89 173 282 398 567 754 946 1230 1550 2550
Weight BW kg 28 52 72 148 248 343 492 646 841 1010 1380 2300

A
Figure 3C 3C 3C 3C 3C 3C 3C 3C 3C 3C 3C 3C
102 103 104 106 108 110 112 114 116 118 120 124

Class ANSI 600 Flex Wedge Solid Wedge

size inch
2 3 4 6 8 10 12 14 16 18 20 24 L
mm50 80 100 150 200 250 300 350 400 450 500 600
A 51 76 102 152 200 248 299 327 375 419 464 559
C Travel 62 96 127 170 220 270 330 350 433 480 470 600
H Closed 719 844 940 1065 1306 1341 1548 1840 1950 2275 2440 2620
0 V1

H1 - - - - 1760 1395 2220 2590 2850 3280 3440 3920

L BW-RF 292 356 432 559 660 787 838 889 991 1092 1194 1397
L RTJ 295 359 435 562 664 791 841 892 994 1095 1200 1407
V 300 400 400 600 - - - - - - - -
H1 - C

V1 - - - - 600 800 600 600 60 60 800 80

Weight RF kg 49 87 143 303 520 860 1048 1455 1527 2180 2675 4650
Weight BW kg 41 78 118 263 436 735 933 1325 1011 1115 1225 3950
H

Figure 6C 6C 6C 6C 6C 6C 6C 6C 6C 6C 6C 6C
102 103 104 106 108 110 112 114 116 118 120 124

CENTER LINE

Class ANSI 900 Class ANSI 1500 Class ANSI 2500

size inch 3 4 6 8 10 size inch 2 3 4 6 8 size inch 2 3 4 6
mm 80 100 150 200 250 mm 50 80 100 150 200 mm 50 80 100 150
A 73 99 146 191 238 A 48 69 92 137 178 A 38 57 73 111
C Travel 95 120 175 220 260 H C Travel 75 97 125 150 210 H C Travel 68 95 97 160 H
Closed 869 1014 1214 1265 1585 Closed 809 909 1020 1257 1420 Closed 880 986 1015 1390
H1 - - - 1750 2130 H1 - - - 1490 1670 H1 - 1230 1260 1630
L BW-RF 381 457 610 737 778 L BW-RF 368 470 546 705 832 L BW-RF 491 578 673 914
L RTJ 384 460 613 740 841 L RTJ 371 473 549 711 841 L RTJ 454 584 683 927
V 400 500 800 - - V 400 500 600 - - V 400 - - -
V1 - - - 800 600 V1 - - - 800 600 V1 - 300 600 600
Weight RF kg 123 212 425 778 1065 Weight RF kg 103 185 298 703 1240 Weight RF kg 188 344 530 1305
Weight BW kg 114 186 377 677 930 Weight BW kg 82 153 264 601 1050 Weight BW kg 147 290 405 1100
Figure 9D 9D 9D 9D 9D Figure 15D 15D 15D 15D 15D Figure 25D 25D 25D 25D
103 104 106 108 110 102 103 104 106 108 102 103 104 106

Hydraulic, pneumatic or electric actuation on request VITAS reserves the right to change design without notice
23
A Long Experience in Energy Equipment and one Goal:
T h e C u s t o m e r ’s s a t i s fa c t i o n .

Vicenza Plant.

04-10 - 1000 - VTSGATE.04

VALVITALIA S.p.A. - Vitas Division

Via Soastene, 24 - 36040 Brendola (VI) - Italy
Phone: +39 0444 749111 - Fax: +39 0444 401498
E-mail: [email protected]
Web site: www.valvitalia.com