12-07-2018

FANUC INDIA

FANUC SERIES 0iMF

SET UP GUIDENCE FUNCTION

FA SALES & APPLICATION

FANUC INDIA

SET UP GUIDENCE FUNCTION

• It is a function to touch the tool to work manually

and to measure and to set the measured values to
the Work Coordinate System in Jog or Handle Mode.
• Eliminates the usage of Expensive Probe & CNC
Programming for measurement of Work Coordinate
System.
• Normal Tool Or 3D Tester Can be Used.

FA SALES & APPLICATION

1
 12-07-2018

FANUC INDIA

Kind Of Measurements

1. Single Surface Measurement

2. Outer Diameter Measurement
3. Inner Diameter Measurement
4. Outside Width Measurement
5. Inside Width Measurement
6. Measurement of Corner Outside
7. Measurement of Corner Inside
8. Angled Work Measurement

FA SALES & APPLICATION

FANUC INDIA

Kind Of Measurements

1/2
FA SALES & APPLICATION

2
 12-07-2018

FANUC INDIA

Kind Of Measurements

2/2
FA SALES & APPLICATION

FANUC INDIA

1. Single Surface Measurement

• This function is used to measure Position on the

Single Surface (X/Y/Z etc) and to set Work Coordinate
System(WCS).

FA SALES & APPLICATION

3
 12-07-2018

FANUC INDIA

1. Single Surface Measurement

1/2
FA SALES & APPLICATION

FANUC INDIA

1. Single Surface Measurement

2/2
FA SALES & APPLICATION

4
 12-07-2018

FANUC INDIA

2. Outer Diameter Measurement

• With the help of three points measurements on

Diameter of the Circle , Center Position Can be
calculated.
• It is set to WCS as a Center Position.

FA SALES & APPLICATION

FANUC INDIA

2. Outer Diameter Measurement

1/3
FA SALES & APPLICATION

5
 12-07-2018

FANUC INDIA

2. Outer Diameter Measurement

2/3
FA SALES & APPLICATION

FANUC INDIA

2. Outer Diameter Measurement

3/3
FA SALES & APPLICATION

6
 12-07-2018

FANUC INDIA

3. Inner Diameter Measurement

• With the help of three points measurements inside

Diameter of the Circle , Center Position Can be
calculated.
• It is set to WCS as a Center Position.

FA SALES & APPLICATION

FANUC INDIA

3. Inner Diameter Measurement

1/3
FA SALES & APPLICATION

7
 12-07-2018

FANUC INDIA

3. Inner Diameter Measurement

2/3
FA SALES & APPLICATION

FANUC INDIA

3. Inner Diameter Measurement

3/3
FA SALES & APPLICATION

8
 12-07-2018

FANUC INDIA

4. Outside Width Measurement

• Two points on the Convex Width( Either in X or Y Axis)

are measured and center position is calculated.
• It is set to WCS as a Center Position.

FA SALES & APPLICATION

FANUC INDIA

4. Outside Width Measurement

1/4
FA SALES & APPLICATION

9
 12-07-2018

FANUC INDIA

4. Outside Width Measurement

2/4
FA SALES & APPLICATION

FANUC INDIA

4. Outside Width Measurement

3/4
FA SALES & APPLICATION

10
 12-07-2018

FANUC INDIA

4. Outside Width Measurement

4/4
FA SALES & APPLICATION

FANUC INDIA

5. Inside Width Measurement

• Two points on the Concave Width( Either in X or Y

Axis) are measured and center position is calculated.
• It is set to WCS as a Center Position.

FA SALES & APPLICATION

11
 12-07-2018

FANUC INDIA

5. Inside Width Measurement

1/4
FA SALES & APPLICATION

FANUC INDIA

5. Inside Width Measurement

2/4
FA SALES & APPLICATION

12
 12-07-2018

FANUC INDIA

5. Inside Width Measurement

3/4
FA SALES & APPLICATION

FANUC INDIA

5. Inside Width Measurement

4/4
FA SALES & APPLICATION

13
 12-07-2018

FANUC INDIA

6. Measurement of Corner Outside

• Four points on Outside Corner are measured and

Corner position & Corner Angle are Calculated.
• The Corner Position is set to WCS.
• Corner Angle is set to Macro Variable.

FA SALES & APPLICATION

FANUC INDIA

6. Measurement of Corner Outside

1/3
FA SALES & APPLICATION

14
 12-07-2018

FANUC INDIA

6. Measurement of Corner Outside

2/3
FA SALES & APPLICATION

FANUC INDIA

6. Measurement of Corner Outside

3/3
FA SALES & APPLICATION

15
 12-07-2018

FANUC INDIA

7. Measurement of Corner Inside

• Four points on Inside Corner are measured and

Corner position & Corner Angle are Calculated.
• The Corner Position is set to WCS.
• Corner Angle is set to Macro Variable.

FA SALES & APPLICATION

FANUC INDIA

7. Measurement of Corner Inside

1/3
FA SALES & APPLICATION

16
 12-07-2018

FANUC INDIA

7. Measurement of Corner Inside

2/3
FA SALES & APPLICATION

FANUC INDIA

7. Measurement of Corner Inside

3/3
FA SALES & APPLICATION

17
 12-07-2018

FANUC INDIA

8. Angled Work Measurement

• Two points on Inclining respects are measured and

angle of Inclining work is Calculated.
• Angle of Inclining work is set to Macro Variable.
• Function Suitable to find out, Inclination of Work
Piece.

FA SALES & APPLICATION

FANUC INDIA

8. Angled Work Measurement

1/2
FA SALES & APPLICATION

18
 12-07-2018

FANUC INDIA

8. Angled Work Measurement

2/2
FA SALES & APPLICATION

FANUC INDIA

3D Tester

2mm Pressure for Precise

Measurement

Measurement Point

2/2
FA SALES & APPLICATION

19