DT-PE 601 CS17 - 3538 Fich Tecnica

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

®

needlona DT-PE/DT-PE 601 CS17

TAN: 3538

Composition
web: Polyacrylonitrile Homopolymer + Polyester
scrim: Polyacrylonitrile Homopolymer + Polyester

Area Weight [g/m²]: 600


Factory Standard FS 04 and
Q/320206 WMGV01-2016

Thickness [mm]: 2.3


Factory Standard FS 01 and
Q/320206 WMGV01-2016

Air Permeability
ISO 9237:1995
[mm/s @ 200 Pa]: 150 resp. 90 l/(dm² min) @ 200 Pa

Tensile Strength
ISO 9073-3:1989 Sample size 200 mm/50 mm,
length [N]: 1,000 Sampling parallel to the scrim threads,
cross [N]: 1,500 Deformation rate 200 mm/min

Temperature Resistance
cont. [°C]: Chemical gas stream conditions may require
peak [°C]: a lower continuous operating temperature
to be maintained

Properties: » heat set


» singed face side
» full bath oil and water repellent
finish for optimal cake release
» available at short-notice in 215 cm wide

The technical data refer to new goods, are determined based on relevant standards and/or BWF Envirotec standards and apply
within the context of our tolerances which can be consulted at www.bwf-envirotec.com/tolerances. No claims whatsoever are
justified by this datasheet. Any recourse to courts of law is excluded. Any persons using this datasheet consent to this agreement.

At our German and Chinese site, we are certified under the ISO 9001 quality management system, the ISO 14001 environmental
management system and the OHSAS 18001 occupational health and safety management system. At our German site, we are
also certified under the ISO 50001 energy management system.

www.bwf-envirotec.com MD_4.2_03_Datasheet 19.10.2017

You might also like